Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
342
datasets available to search
ShareScore release 0.9.0
Dataset results
342 results for “fabric”
Vimose coat mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. Subsequently the specimen of mail was tested in VR to reveal its physical and mechanical properties. For further details see https://doi.org/10.1016/j.culher.2020.12.002 The authors of the reconstruction are Aleksei Moskvin https://independent.academia.edu/AlekseiMoskvin https://sketchfab.com/alekseimoskvin1/ Mariia Moskvina https://independent.academia.edu/MariiaMoskvina https://sketchfab.com/mariia89 (Saint Petersburg State University of Industrial Technologies and Design) Martijn A. Wijnhoven https://vu-nl.academia.edu/MartijnAWijnhoven (VU University Amsterdam) Source: Objaverse 1.0 / Sketchfab
Gammertingen mail fabric: 3D reconstruction
The 3D model presents a digital reconstruction of archaeological mail fabric from Gammertingen. Location: Landesmuseum Württemberg https://www.landesmuseum-stuttgart.de/ https://sketchfab.com/lmwstuttgart To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. The authors of the reconstructions are Aleksei Moskvin (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/AlekseiMoskvin Mariia Moskvina (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/MariiaMoskvina and Martijn A. Wijnhoven (VU University Amsterdam) https://vu-nl.academia.edu/MartijnAWijnhoven Source: Objaverse 1.0 / Sketchfab
Carlingwark Loch mail fabric
The 3D model presents a digital reconstruction of archaeological mail fabric. To create 3D models of the rings, we used polygonal modelling functions of Blender software. In order to record the relevant measurements of the mail rings, we used a list of parameters. This list includes 11 parameters for a riveted ring and four parameters for a solid ring. The accuracy of the digital replicas of the rings was 0.01 mm. The authors of the reconstructions are Aleksei Moskvin (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/AlekseiMoskvin Mariia Moskvina (Saint Petersburg State University of Industrial Technologies and Design) https://independent.academia.edu/MariiaMoskvina and Martijn A. Wijnhoven (VU University Amsterdam) https://vu-nl.academia.edu/MartijnAWijnhoven DOI: https://doi.org/10.13140/RG.2.2.27393.99680 Source: Objaverse 1.0 / Sketchfab
AI-BASED INSPECTION OF RECYCLED CARBON FIBRE FABRIC
<p>The dataset is part of an EU-funded project and is included in the paper entitled "AI-based Inspection of Recycled Carbon Fibre Fabric."</p> <p>The work presented in this paper is related to the project “MC4” and has received funding from the European Union’s Horizon Europe research and innovation program under grant agreement No 101057394. Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. </p> <p> </p> <p><a href="../api/records/11203952/draft/files/sample_images.zip/content" target="_blank" rel="noopener noreferrer">sample_images.zip</a> - It is a zip file containg the .png images. These are the samples images of the output from the in-house developed sensor.</p> <p><a href="../api/records/11203952/draft/files/dataset_samples.pkl/content" target="_blank" rel="noopener noreferrer">dataset_samples.pkl</a> - It is a pickle file. This contains the dataset whose results are reported in the paper .</p> <p><a href="../api/records/11203952/draft/files/load_data.py/content" target="_blank" rel="noopener noreferrer">load_data.py</a> - This is the sample code to load the data. Explanation to the shapes and the structure of the data are present here.</p>
Bottom-up Fabrication of 2D Rydberg Exciton Arrays in Cuprous Oxide
Open the record for dataset details and reuse information.
Applicability of new sustainable and efficient alginate-based composites for critical raw materials recovery: General composites fabrication optimization and adsorption performance evaluation
<p>This dataset contains the raw data for the publication "Applicability of new sustainable and efficient alginate-based composites for critical raw materials recovery: General composites fabrication optimization and adsorption performance evaluation" by Fila et al, published in Chemical Engineering Journal. The upload includes raw data of physicochemical characterizations of calcium alginate and its composites, i.e. alginate-biochar and alginate-clinoptilolite, including BET, SEM, TG, XPS and XRD analyses. </p>
Burial impact on the Tatra Mts from a rock magnetic and magnetic fabric perspective: anisotropy of anhysteretic remanent magnetization, part 2
<p>The dataset contains the second part of the anisotropy of anhysteretic remanent magnetization analyses of Cretaceous and Paleogene rocks from the Tatra Mts.</p>
Burial impact on the Tatra Mts from a rock magnetic and magnetic fabric perspective: anisotropy of anhysteretic remanent magnetization, part 1
<p>The dataset contains the first part of the anisotropy of anhysteretic remanent magnetization analyses of Cretaceous rocks from the Tatra Mts.</p>
Burial impact on the Tatra Mts from a rock magnetic and magnetic fabric perspective: rock magnetic data
<p>The dataset contains rock magnetic data (Isothermal Remanent Magnetization, IRM back-field, hysteresis loop, magnetic susceptiblity) from Cretaceous and Paleogene rocks of the Tatra Mts and surrounding areas.</p>
Burial impact on the Tatra Mts from a rock magnetic and magnetic fabric perspective: anisotropy of anhysteretic remanent magnetization, part 3
<p>The dataset contains the third part of the anisotropy of anhysteretic remanent magnetization analyses of Paleogene rocks from the Tatra Mts.</p>
Forming tests of a uni- and a bidirectional non-crimp fabric for different orientations and geometries (hemisphere, tetrahedron, square box)
<p><strong>Reference:</strong> The data is published as supplementary data for publications and for other researchers to incorporate the data in their work. Details behind the experimental procedure and the methods applied to analyze the tests are published in (please use to reference this data):</p> <p>“B. Schäfer, R. Zheng, J. Colmars, A. Platzer, N. Naouar, P. Boisse, L. Kärger. <em>Experimental analysis of the forming behavior of uni- and bidirectional non-crimp fabrics for different geometries</em>, Composites Part B: Engineering, 287:111765, 2024. <a href="https://doi.org/10.1016/j.compositesb.2024.111765">https://doi.org/10.1016/j.compositesb.2024.111765</a>”</p> <p><strong>Description:</strong> This dataset contains high-resolution images and analyzed numerical data (punch forces, outer contour after forming, local strains measured with DIC) of forming tests on a unidirectional non-crimp fabric (UD-NCF) and a bidirectional non-crimp fabric (Biax-NCF) for different layup configurations and punch shapes (hemisphere, tetrahedron, square box). The tests were conducted for various single- and double-layer configurations with different relative fiber orientations. The experiments were conducted at the “LaMCoS – Laboratoire de Mecanique des Contacts and des Structures” from the “Institut National des Sciences Appliquées de Lyon (INSA Lyon)” in France. The analysis of the data was performed at the “Institute of Vehicle System Technology, Division Lightweight Engineering” from the “Karlsruhe Institute of Technology (KIT)” in Germany. The work was part of the international collaborative research project AMECOMP funded by the ANR in France and the DFG in Germany (DFG: 431354059, ANR: ANR-19-CE06-0031) - <a href="https://doi.org/10.5445/IR/1000172090">https://doi.org/10.5445/IR/1000172090</a>.</p> <p><strong>Test setup and method:</strong> The experimental setup consists of three punch shapes (hemisphere, tetrahedron, square box) with matching planar blank holders and dies. The blank holders apply their own weight to the fabric, and centering pins prevent any in-plane movement. All setups are mounted to a universal testing machine by ZwickRoell. The blank holders and dies are made of transparent methyl methacrylate (PMMA) to allow for the acquisition of digital images by a high-resolution camera. The forming depths are 75 mm, 95 mm, and 85 mm with blank holder weights of 1.7 kg, 6.0 kg, and 1.7 kg for the hemisphere, tetrahedron, and square box punches, respectively. The dimensions and schematics are summarized in the image <em>“Experimental-setup_schematics-dimensions.jpg”</em>. The deformation is measured via Digital Image Correlation (DIC) with a regular grid of white dots of acrylic paint using a stencil with a distance of l<sub>e </sub>= 10 mm.</p> <p><strong>Material:</strong> A unidirectional (UD300) and bidirectional (MD600) non-crimp fabric (NCF) both without binder are used, cf. <em>”Material_schematics.jpg”</em>. The fabrics are manufactured by Zoltek™ and produced from their PX35-50K continuous carbon (CF) fiber heavy tows. Both fabrics are stitched together with a 76 dtex Polyester stitching yarn in a Tricot pattern. A textile layer of UD300 consists of a single fiber layer of aligned CF tows in warp direction with thin glass fibers (GF) in weft direction on the back for improved handleability. A textile layer of MD600 comprises two fiber layers in a 0°/90° orientation. Both fabrics have a similar number of CFs in each fiber layer with about 300 g/m2 in their respective reinforcing directions. </p> <p><strong>Tested configurations for all three punch shapes: </strong></p> <ul> <li> UD-NCF: three types of single-layer ([0°<sub>U</sub>], [45°<sub>U</sub>], [90°<sub>U</sub>]) and two types of double-layer ([0°<sub>U</sub>∕45°<sub>U</sub>], [0°<sub>U</sub>∕90°<sub>U</sub>]) configurations</li> <li> Biax-NCF: two types of single layer ([(0°∕90°)<sub>B</sub>], [(±45°)<sub>B</sub>]) and one type of double-layer [(0°∕90°)<sub>B</sub>∕(±45°)<sub>B</sub>] configurations</li> </ul> <p><strong>Provided data:</strong></p> <ul> <li>High-resolution images of all tested configurations for both materials for the different geometries in the respective .7z archives <a href="https://www.7-zip.org/">(7-zip.org)</a>. [Only one representative image set per configuration due to total size limitations by zenodo.org]</li> <li>Analyzed numerical data (punch forces, outer contours after forming, local strains measured with DIC) for all tests. The data is stored as nested dictionaries in the folder <em>“_analyzed_data”</em> in the respective .json files. A demonstration to access the data via Python and recreate the plots from the original publication is provided in the supplementary Jupyter Notebook (<em>“example_data_analysis.ipynb”)</em></li> </ul>
Ex-situ X-ray computed tomography data from two regions of non-crimp fabric based fibre composite under fatigue loading
<p>Ex-situ X-ray CT fatigue testing data published with data in brief: </p> <p>Jespersen, K. M., Glud, J. A., Zangenberg, J., Hosoi, A., Kawada, H., & Mikkelsen, L. P. (2018). <em>Ex-situ X-ray computed tomography, tension clamp and in-situ transilluminated white light imaging data of non-crimp fabric based fibre composite under fatigue loading. Data in Brief.</em></p> <p>as a part of the below journal paper.</p> <p>Jespersen, K. M., Glud, J. A., Zangenberg, J., Hosoi, A., Kawada, H., & Mikkelsen, L. P. (2018). Uncovering the fatigue damage initiation and progression in uni-directional non-crimp fabric reinforced polyester composite. Composites Part A.</p> <p>If using the data, please refer to one of the two.</p>
Tension clamp X-ray CT data of non-crimp fabric based fibre composite under fatigue loading
<p>Tension clamp X-ray CT fatigue testing data published with data in brief: </p> <p>Jespersen, K. M., Glud, J. A., Zangenberg, J., Hosoi, A., Kawada, H., & Mikkelsen, L. P. (2018). <em>Ex-situ X-ray computed tomography, tension clamp and in-situ transilluminated white light imaging data of non-crimp fabric based fibre composite under fatigue loading. Data in Brief.</em></p> <p>as a part of the below journal paper.</p> <p>Jespersen, K. M., Glud, J. A., Zangenberg, J., Hosoi, A., Kawada, H., & Mikkelsen, L. P. (2018). Uncovering the fatigue damage initiation and progression in uni-directional non-crimp fabric reinforced polyester composite. Composites Part A.</p> <p>If using the data, please refer to one of the two.</p>
Research data supporting "Bioinspired fabrication of DNA-inorganic hybrid composites using synthetic DNA"
<p>Raw data supporting the publication:</p> <p>Kim E., et al., "Bio-inspired fabrication of DNA-inorganic hybrid composites using synthetic DNA.", ACS Nano, 2019, DOI: 10.1020/acsnano.8b06492.</p>
Research data supporting "Buoyancy-Driven Gradients for Biomaterial Fabrication and Tissue Engineering"
<p>Research data supporting the publication:</p> <p>Li C. et al., Advanced Materials, 2019, DOI: 10.1002/adma.201900291</p>
Studies on 3D printing of Na3Zr2Si2PO12 ceramic solid electrolyte through Fused Filament Fabrication
<p><span>Solid-state batteries are considered being the next step in battery technology to achieve higher energy densities and potentially safer batteries. As there is no organic liquid, the risk of flammability is drastically reduced. Nevertheless, there are numerous challenges associated with the realization of all-solid-state batteries, such as improving slow kinetics, contact interface issues between battery components and cell integration among others. 3D printing holds the potential to address these issues as it <span> </span>allows to improve kinetics by structuring the battery components and the possibility of a customized cell integration. A structured surface of the electrolyte can in principle also enhance interface effects with the metal electrode. To contribute in this regard, composite filaments with Na<sub>3</sub>Zr<sub>2</sub>Si<sub>2</sub>PO<sub>12</sub> were fabricated and 3D printed. Subsequent sintering of the printed parts after removal of the polymer components led to the required densification of the fully ceramic electrolyte. The parts were microstructurally and electrochemically characterized and showed a reasonable performance with an ionic conductivity of (3.02 ± 0.14) · 10<sup>-4</sup> S·cm<sup>-1</sup> at 20 °C. Critical current density testing revealed stable cycling up to 200 mA·cm<sup>-2</sup>, with cell failure occurring at a current density of 750 mA·cm<sup>-2</sup>, demonstrating the application potential of 3D printed full ceramic solid electrolytes. </span></p>
Laser assisted fabrication of mechanochemically robust Ti3Au intermetallic at Au-Ti interface
<p>Description:</p> <p> a. Materials Properties used in the Finite Element Analysis (FEA): </p> <ol> <li><strong>specific_enthalpy.zip</strong> :The specific enthalpy (h) data for Au and Ti are presented in the table of temperature (K) and specific enthalpy (J/kg) columns. specific_h_au0001.dat file corresponds to gold and specific_h_ti0001.datcorresponds to Titanium. In each of these .dat files, the temperature values are provided in the first column whereas specific enthalpy values are provided in the second column.</li> <li><strong>viscosity.zip folder</strong>: The viscosity (mu) data for Au and Ti are presented in the table of temperature (K) and viscosity (Pa S) columns. mu_Au.dat file corresponds to gold and mu_Ti.dat corresponds to Titanium. In each of these .dat files, the temperature values are provided in the first column whereas viscosity values are provided in the second column. Solid regimes are assumed to be of high viscosity values. </li> </ol> <p> b. <strong>information_total_geometry_microscale.csv</strong>: This is the data related to finite element analysis. The information geometrical dimensions of the overall geometry (combined geometry consisting of bottom titanium layer and upper gold layer) and the numbers of 1D, 2D and 3D mesh elements is provided in this file. This is the data associated with Fig. 8(a) in the paper.</p> <p>c. <strong>top_and_bottom_layers_comparison_microscale.csv</strong>: The data in this file is presented to emphasize the role of creating finite element meshes of different densities. This file only presents the information about the geometrical dimensions and 3D mesh elements. This file specifically compares the number of mesh elements between the top gold layer and bottom titanium layer. The gold layer (2 micrometers in height) is 25 times thinner than the titanium layer (50 micrometers). However, the number of 3D volume elements in the titanium layer is only 2.19 times more than that of gold layer. So, the upper Au layer has relatively fine meshing and lower Ti layer has relatively coarse meshing. </p> <p> <br>d. <strong>radial_distance_irradiance_intensity_data.csv</strong>: The data is related to laser related aspects in the finite element analysis. This file consists of the data showing the distribution of irradiance (W/m^2) with the radial distance (r) from the center of the beam spot for a flat top heat source described with the expression I = \frac{P}{3.14*r0^2} U*|r0-r| . In this work, laser power = 100.0 W and beam spot radius (r0) = 122.5 micrometers. The 3D visualization of this data is provided at: </p> <p> </p> <p>e. l<strong>aser_material_interface.csv</strong>: This file outlines the major concepts how the laser heat source has been interfaced with the material domain in the finite element analysis. the data is in the string format.</p> <p> </p> <p>f. <strong>initial_configurations_of_molecular_slabs.zip</strong>: The configuration of molecular slabs of HCP Ti and Simple Cubic Ti3Au intermetallics are respectively presented as two separated files.</p> <p>g. <strong>nanoindentation-force-ti3au-imc.csv</strong>: The data of indentation depth (Angstrom) and force (nN) in the upper active region for the Ti3Au slab are presented. </p> <p>h. <strong>nanoindentation-force-titanium.csv</strong>: The data of indentation depth (Angstrom) and force (nN) in the upper active region for the Ti slab are presented. </p> <p> </p> <p> </p> <p> </p>
Seeing the piles of the velvet bending under our finger sliding over a tactile stimulator improves the feeling of the fabric
<p>Using friction modulation to simulate fabrics with a tactile stimulator (i.e. virtual surface) is not<br>sufficient to render fabric touch and even more so for hairy fabrics. We hypothesized that seeing<br>the pile of the velvet darken or lighten depending on changes in the finger movement direction<br>on the virtual surface should improve the velvet fabric rendering.</p> <p><strong>Experiment 1</strong> : Participants actively rubbed a tactile device or a velvet fabric looking at a screen that showed a synthesized image of a velvet which either remained static (V-static) or darkening/lightening with the direction of touch (V-moving). We showed that in V-moving condition, the touched surface was always perceived rougher, which is a descriptor of a real velvet<strong>.</strong></p> <p><em>Files : data_brutes.csv</em> and <em> ordre_xx_c.csv</em> for data,<em> Calculus_data_expe1.Rmd</em> for code</p> <p><strong>Experiment 2</strong> : Using electroencephalography and sources localization analyses, we found increased activity in the occipital and inferiorparietal lobes when seeing dark and shinning traces during back and forth finger<br>movements over the virtual surface. This suggests that these two posterior cortical regions work<br>together to evaluate visuo-tactile congruence between the seen and the felt (tactile). The visuotactile binding, evidenced by neural synchronization (specifically, theta band [5-7 Hz] oscillation) in the left inferior posterior parietal lobule, is consistent with enhanced integration of information and likely contributed to the emergence of a more realistic velvet representation. </p> <p><em>Files </em>: <em>EEG time frequency individual data.xlsx</em> and all <em>.eeg</em></p>
Raw images, video, and data file for the manuscript "Fabrication of Low-Cost, High-Resolution Open Capillary Microfluidics towards Self-Sustaining, Long-Term Hydration of Engineered Living Materials"
<p>This dataset includes the raw images and data file in the manuscript "Fabrication of Low-Cost, High-Resolution Open Capillary Microfluidics towards Self-Sustaining, Long-Term Hydration of Engineered Living Materials", specifically:</p> <ul> <li>Raw images for the optimized print with the PEGDA-glycerol-water resin (Figure 2 & Figure S2)</li> <li>Raw images for the optimized print with the PEGDA-glycerol-LB resin (Figure 2)</li> <li>Raw images for the optimized print with the BSA-PEGDA-water resin (Figure 3)</li> <li>Raw images and video for the spontaneous capillary flow of LB media in a PEGDA-glycerol-LB microfluidic chip (Figure 4)</li> <li>Raw data for the UV-vis spectrum of LB media (Figure S4)</li> </ul>
Magnetic fabric data in the Central Sichuan Basin, South China
<p>Table S1 shows the summary of magnetic scalar and directional data in paleogeographic coordinate system along the transect AA’ across the Central Sichuan Basin. For this study, a total of 337 standard oriented rock samples were collected from 29 sites within the Triassic-Cretaceous sediments for room-temperature AMS measurements along a ~210 km-long transect from the Longquan Shan Fault to the Huaying Shan Fault across the Central Sichuan Basin using an electricity-powered portable drill. </p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.