Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
159
datasets available to search
ShareScore release 0.9.0
Dataset results
159 results for “o3”
ACT-America: L2 In Situ Atmospheric CO2, CO, CH4, and O3 Concentrations, Eastern USA
This dataset provides atmospheric carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), water vapor (H2O), and ozone (O3) concentrations collected during airborne campaigns conducted by the Atmospheric Carbon and Transport-America (ACT-America) project. ACT-America's mission spanned 4 years and included five 6-week airborne campaigns covering all 4 seasons and 3 regions of the central and eastern United States. This dataset provides results from all five campaigns, including Summer 2016, Winter 2017, Fall 2017, Spring 2018, and Summer 2019. Two instrumented aircraft platforms, the NASA Langley Beechcraft B200 King Air and the NASA Goddard Space Flight Center's C-130H Hercules, were used to collect high-quality in situ measurements across a variety of continental surfaces and atmospheric conditions. CO2, CO, CH4, and H2O were collected with an infrared cavity ring-down spectrometer system (CRDS; Picarro Inc.). Ozone data were collected with a dual beam differential UV absorption ozone monitor (Model 205; 2B Technologies). Both aircraft hosted identical arrays of in situ sensors. Complete aircraft flight information including, but not limited to, latitude, longitude, altitude, and meteorological conditions are also provided.
SBUV2/NOAA-17 Ozone (O3) Nadir Profile and Total Column 1 Day L2 V1 (SBUV2N17L2) at GES DISC
The Solar Backscattered Ultraviolet (SBUV) from NOAA-17 Level-2 daily product (SBUV2N17L2) contains ozone nadir profile and total column data from retrievals generated from the v8.6 SBUV algorithm. The v8.6 SBUV algorithm estimates the ozone nadir profile and total column from SBUV measurements using 1) the Brion-Daumont-Malicet ozone cross sections, 2) an OMI-derived cloud-height climatology, 3) a revised a priori ozone climatology, and 4) inter-instrument calibration based on comparisons with no local time difference.The SBUV2N17L2 product is written as daily files using the HDF5 format, with file sizes ranging from about 1 to 5 Mbytes. Data are available from July 2002 through April 2013. The SBUV2N17L2 data product was used as input in creating the SBUV2N17L3zm monthly zonal mean data product.
OMI/Aura Ozone(O3) Total Column 1-Orbit L2 Swath 13x24 km V004 (OMTO3) at GES DISC
The Aura Ozone Monitoring Instrument (OMI) Level-2 Total Column Ozone Data Product OMTO3 (Collection Version 004) is available from the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) for the public access. This level-2 global total column ozone product (OMTO3) is based on the enhanced TOMS version-8 algorithm that essentially uses the ultraviolet radiance data at 317.5 and 331.2 nm at a pixel resolution of 13 x 24 km at nadir. OMI hyper-spectral measurements help in the corrections for the factors that induce uncertainty in ozone retrievals (e.g., cloud and aerosol, sea-glint effects, profile shape sensitivity, SO2 and other trace gas contamination). In addition to the total ozone values this product also contains some auxiliary derived and ancillary input parameters including N-values, effective Lambertian scene-reflectivity, cloud fraction, cloud pressure, ozone below clouds, terrain height, geolocation, solar and satellite viewing angles, and quality flags. The shortname for this Level-2 OMI total column ozone product is OMTO3. The algorithm for this product was originally developed by a team led by Dr. Pawan K. Bhartia at NASA Goddard Space Flight Center. The current product lead is Dr. Can Li.The OMTO3 files are stored in the version 5 EOS Hierarchical Data Format (HDF-EOS5). Each file contains data from the day lit portion of an orbit (~53 minutes). There are approximately 14 orbits per day. The maximum file size for the OMTO3 data product is approximately 35 MB.
SBUV/Nimbus-7 Ozone (O3) Nadir Profile and Total Column 1 Day L2 V1 (SBUVN07L2) at GES DISC
The Solar Backscattered Ultraviolet (SBUV) from Nimbus-7 Level-2 daily product (SBUVN07L2) contains ozone nadir profile and total column data from retrievals generated from the v8.6 SBUV algorithm. The v8.6 SBUV algorithm estimates the ozone nadir profile and total column from SBUV measurements using 1) the Brion-Daumont-Malicet ozone cross sections, 2) an OMI-derived cloud-height climatology, 3) a revised a priori ozone climatology, and 4) inter-instrument calibration based on comparisons with no local time difference.The SBUVN07L2 product is written as daily files using the HDF5 format, with file sizes ranging from about 1 to 5 Mbytes. Data are available from November 1978 through May 1990. The SBUVN07L2 data product was used as input in creating the SBUVN07L3zm monthly zonal mean data product.
OMPS-NPP L2 LP Ozone (O3) Vertical Profile swath daily 3slit V2.5 (OMPS_NPP_LP_L2_O3_DAILY) at GES DISC
The OMPS-NPP L2 LP Ozone (O3) Vertical Profile swath daily 3slit collection contains ozone measured by the Ozone Mapping and Profiling Suite (OMPS) Limb-Profiler (LP) sensor on the Suomi-NPP satellite. The LP ozone product measures the vertical distribution of ozone in the stratosphere and lower mesosphere. The algorithm derives ozone profile values along with errors in the UV from 29.5 km and 52.5 km, and in the visible from cloud top to 37.5 km (when there are no clouds the lower limit is 12.5 km). Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14.5 orbits per day, the data from the center of the LP three slits are used to make a vertical profile. The profile is measured from the ground up to about 60 km with a vertical resolution of the retrieved profiles of approximately 1.8 km.The data are written using the Hierarchical Data Format Version 5 or HDF5.
OMPS-N21 L2 LP Ozone (O3) Vertical Profile swath daily 3slit V1.0 (OMPS_N21_LP_L2_O3_DAILY) at GES DISC
The OMPS-N21 L2 LP Ozone (O3) Vertical Profile swath daily 3slit collection contains ozone measured by the Ozone Mapping and Profiling Suite (OMPS) Limb-Profiler (LP) sensor on the NOAA-21 satellite. The LP ozone product measures the vertical distribution of ozone in the stratosphere and lower mesosphere. The algorithm derives ozone profile values along with errors in the UV from 29.5 km and 52.5 km, and in the visible from cloud top to 37.5 km (when there are no clouds the lower limit is 12.5 km). Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14.5 orbits per day, the data from the center of the LP three slits are used to make a vertical profile. The profile is measured from the ground up to about 60 km with a vertical resolution of the retrieved profiles of approximately 1.8 km.The data are written using the Hierarchical Data Format Version 5 or HDF5.
OMI/Aura Ozone (O3) Profile 1-Orbit L2 Swath 13x48km V003 (OMO3PR) at GES DISC
The Aura Ozone Monitoring Instrument Level-2 Ozone Profile data product OMO3PR (Version 003) is now available from the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) for the public access. OMI Level-2 ozone profile product, OMO3PR at the pixel resolution 13x 48 km (at nadir), is based on the optimal estimation algorithm (Rodgers, 2000) with climatological ozone profiles as a-priori information. The OMO3PR retrieval algorithm uses spectral radiance values from the UV1 channel (270 nm to 308.5 nm) and from the first part of the UV2 channel (311.5 nm to 33 0 nm). OMO3PR product provides ozone values (in Dobson unit) for 18 atmospheric layers. It also provides a-priori ozone profile values, error covariance matrix, averaging kernel and some ancillary information such as time, latitude, longitude, solar zenith and viewing zenith angles and quality flags. The short name for this Level-2 OMI ozone profile product is OMO3PR. The lead scientist for this product is Dr. Johan de Haan.The OMO3PR product files are stored in the version 5 Hierarchical Data Format (HDF-EOS5). Each file contains data from the day lit portion of an orbit (approximately 53 minutes). There are approximately 14 orbits per day thus the total data volume is approximately 150 GB/day.
HIRDLS/Aura Level 3 Ozone (O3) 1deg Lat Zonal Fourier Coefficients V007 (H3ZFCO3) at GES DISC
The "HIRDLS/Aura Level 3 Ozone (O3) Zonal Fourier Coefficients" version 7 data product (H3ZFCO3) contains the entire mission (~3 years) of HIRDLS data expressed as zonal Fourier coefficients in 1 degree latitude bands from -64 to 80 degrees at 121 pressure levels. The coefficients are computed from the HIRDLS Level 2 profiles with a Kalman filter approach using both forward and backward passes in time. Expressed as the mean and up to 7 sine and cosine coefficients (4 waves for ascending and descending, 7 waves for combined), these coefficients may be used to compute values at any longitude. The data are provided on a pressure grid with 24 levels per decade, corresponding to about 1 km vertical resolution. The useful vertical range of the data is 422 to 0.1 hPa. The precision values are given by the root-mean square of the differences between the estimated fields and the input data.The data are stored in the version 5 Hierarchical Data Format for the Earth Observing System (HDF-EOS5), which is an extension of the HDF5 format. Each file contains a zonal object with data for the entire mission with separate data fields for ascending (daytime), descending (nighttime), and combined orbit node.
OMPS-NPP L2 LP Ozone (O3) Vertical Profile swath daily Center slit V2.6 (OMPS_NPP_LP_L2_O3_DAILY) at GES DISC
Version 2.6 is the current version of this data product, and supersedes all previous versions.The OMPS-NPP L2 LP Ozone (O3) Vertical Profile swath daily Center slit collection contains ozone measured by the Ozone Mapping and Profiling Suite (OMPS) Limb-Profiler (LP) sensor on the Suomi-NPP satellite. The LP ozone product measures the vertical distribution of ozone in the stratosphere and lower mesosphere. The algorithm derives ozone profile values along with errors in the UV from 29.5 km and 52.5 km, and in the visible from cloud top to 37.5 km (when there are no clouds the lower limit is 12.5 km). See the README for full description of the product and updated retrieval algorithm. Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14.5 orbits per day, the data from the center of the LP three slits are used to make a vertical profile. The profile is measured from the ground up to about 60 km with a vertical resolution of the retrieved profiles of approximately 1.8 km.The data are written using the Hierarchical Data Format Version 5 or HDF5.
CARVE: L2 Merged Atmospheric CO2, CO, O3 and CH4 Concentrations, Alaska, 2012-2015
This data set provides atmospheric carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), ozone (O3), and water vapor (H2O) concentrations from airborne campaigns over the Alaskan and Canadian arctic for the Carbon in Arctic Reservoirs Vulnerability Experiment (CARVE). These data are merged and gap-filled outputs from two different cavity ring-down spectrometers (CRDS; Picarro Inc.) flown aboard the CARVE aircraft and are presented at 5-second intervals throughout each flight. Aircraft latitude, longitude, and altitude are also provided. Flight campaigns took place from 2012 to 2015 between the months of March and November to enable investigation of both seasonal and inter-annual variability in atmospheric gas content. The measurements included in this data set are crucial for understanding changes in Arctic carbon cycling and the potential threats posed by thawing of Arctic permafrost.
SBUV2/NOAA-9 Ozone (O3) Nadir Profile and Total Column 1 Day L2 V1 (SBUV2N09L2) at GES DISC
The Solar Backscattered Ultraviolet (SBUV) from NOAA-9 Level-2 daily product (SBUV2N09L2) contains ozone nadir profile and total column data from retrievals generated from the v8.6 SBUV algorithm. The v8.6 SBUV algorithm estimates the ozone nadir profile and total column from SBUV measurements using 1) the Brion-Daumont-Malicet ozone cross sections, 2) an OMI-derived cloud-height climatology, 3) a revised a priori ozone climatology, and 4) inter-instrument calibration based on comparisons with no local time difference.The SBUV2N09L2 product is written as daily files using the HDF5 format, with file sizes ranging from about 1 to 5 Mbytes. Data are available from February 1985 through January 1998. The SBUV2N09L2 data product was used as input in creating the SBUV2N09L3zm monthly zonal mean data product.
TOMS Earth-Probe Ozone (O3) Total Column 1-Orbit L2 Swath 50 x 50 km V008 (TOMSEPL2) at GES DISC
The Earth Probe (EP) Total Ozone Mapping Spectrometer (TOMS) version 8 orbital swath data product contains total column ozone, UV aerosol index, and Lambertian effective surface reflectivity (Rayleigh corrected) at approximately 50x50 km2 resolution (at nadir). This product also contains some auxiliary derived and ancillary parameters including N-values, SO2 index, cloud fraction, cloud pressure, ozone below clouds, terrain height, geolocation, solar and satellite viewing angles, and data quality flags. These data are stored in the version 5 EOS Hierarchical Data Format (HDF-EOS5).The TOMS data were produced by the Laboratory for Atmospheres at NASA Goddard Space Flight Center (Code 614).
SBUV/Nimbus-7 Ozone (O3) Profile and Total Column Ozone 1 Month Zonal Mean L3 Global 5.0 degree Latitude Zones V1 (SBUVN07L3zm) at GES DISC
The Solar Backscattered Ultraviolet (SBUV) from Nimbus-7 Level-3 monthly zonal mean (MZM) product (SBUVN07L3zm) is derived from the Level-2 retrieved ozone profiles. Ozone retrievals are generated from the v8.6 SBUV algorithm. A Level-3 MZM file computes zonal means covering 5 degree latitude bands for each calendar month. For this product there are 139 months of data from November 1978 through May 1990. There are a total of 36 latitudinal bands, 18 in each hemisphere. Profile data are provided at 21 layers from 1013.25, 639.318, 403.382,254.517, 160.589, 101.325,63.9317, 40.3382, 25.4517, 16.0589, 10.1325, 6.39317,4.03382, 2.54517, 1.60589, 1.01325,0.639317, 0.403382, 0.254517, 0.160589 and 0.101325 hPa (measured at bottom of layer). NOTE: Some profiles have 20 layers and do not report the top most layer. Mixing ratios are reported at 15 layers from 0.5, 0.7, 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.0, 10.0, 15.0, 20.0, 30.0, 40.0 and 50.0 hPa (measured at middle of layer). The MZM product averages retrievals that meet the criteria for a good retrieval as determined by error flags in the Level 2 data. A good retrieval is defined as satisfying the following conditions: 1) Profile Error Flag = 0 or 1 (0 = good retrieval; 1 = solar zenith angle > 84 degrees). 2) Total Error Flags = 0, 1, 2 or 5 (0 = good retrieval; 1 = not used; 2 = solar zenith angle > 84 degrees; large discrepancy between profile total and best total ozone).NOTE - Total error flag = 5 is anomalously applied at high latitudes and high solar zenith angles where the B-Pair total ozone estimate is not as reliable as the ozone profile under these conditions. This error flag may be removed in future version of algorithm.The zonal means computed for each month are screened according to the following statistical criteria: 1) Number of good retrievals for the month greater than or equal to 2/3 of the samples for a nominal month. 2) Mean latitude of good retrievals less than or equal to 1 degree from center of latitude band. 3) Mean time of good retrievals less than or equal to 4 days from center of month (i.e., day = 15).
OMI/Aura Ozone (O3) Total Column Daily L2 Global Gridded 0.25 degree x 0.25 degree V004 (OMTO3G) at GES DISC
This Level-2G daily global gridded product OMTO3G is based on the pixel level OMI Level-2 Total Ozone Product OMTO3. The OMTO3 product is from the enhanced TOMS version-8 algorithm that essentially uses the ultraviolet radiance data at 317.5 and 331.2 nm. The OMTO3G data product is a special Level-2 Global Gridded Product where pixel level data are binned into 0.25x0.25 degree global grids. It contains the data for all L2 scenes that have observation time for the 24-hour period beginning at 00:00:00 UTC. All data pixels that fall in a grid box are saved without averaging. Scientists can apply a data filtering scheme of their choice and create new gridded products.The OMTO3G data product contains almost all parameters that are contained in the OMTO3. For example, in addition to the total column ozone it also contains cloud fraction, cloud pressure, terrain height, geolocation, solar and satellite viewing angles, and quality flags.The OMTO3G files are stored in the version 5 EOS Hierarchical Data Format (HDF-EOS5). Each file contains daily data from approximately 15 orbits. The maximum file size for the OMTO3G data product is about 150 Mbytes.
TROPESS Chemical Reanalysis O3 Increment 6-Hourly 3-dimensional Product V1 (TRPSCRO3I6H3D) at GES DISC
The TROPESS Chemical Reanalysis O3 Increment 6-Hourly 3-dimensional Product contains the ozone increment by data assimilation. The data are part of the Tropospheric Chemical Reanalysis v2 (TCR-2) for the period 2005-2021. TCR-2 uses JPL's Multi-mOdel Multi-cOnstituent Chemical (MOMO-Chem) data assimilation framework that simultaneously optimizes both concentrations and emissions of multiple species from multiple satellite sensors.The data files are written in the netCDF version 4 file format, and each file contains a year of data at 6-hourly resolution, and a spatial resolution of 1.125 x 1.125 degrees at 27 pressure levels between 1000 and 60 hPa. The principal investigator for the TCR-2 data is Miyazaki, Kazuyuki.
BUV/Nimbus-4 Ozone (O3) Nadir Profile and Total Column 1 Day L2 V1 (BUVN04L2) at GES DISC
The Solar Backscattered Ultraviolet (SBUV) from Nimbus-4 Level-2 daily product (BUVN04L2) contains ozone nadir profile and total column data from retrievals generated from the v8.6 SBUV algorithm. The v8.6 SBUV algorithm estimates the ozone nadir profile and total column from SBUV measurements using 1) the Brion-Daumont-Malicet ozone cross sections, 2) an OMI-derived cloud-height climatology, 3) a revised a priori ozone climatology, and 4) inter-instrument calibration based on comparisons with no local time difference.The BUVN04L2 product is written as daily files using the HDF5 format, with file sizes ranging from about 1 to 5 Mbytes. Data are available from May 1970 through April 1976. The BUVN04L2 data product was used as input in creating the BUVN04L3zm monthly zonal mean data product.
MLS/Aura Level 3 Daily Binned Ozone (O3) Mixing Ratio on Assorted Grids V005 (ML3DBO3) at GES DISC
ML3DBO3 is the EOS Aura Microwave Limb Sounder (MLS) daily binned on various vertical grids product for ozone (O3) derived from radiances measured by the 240 GHz radiometer. The data version is 5.1. Spatial coverage is near-global (-82 to +82 degrees latitude) at a spatial resolution of 4 degrees latitude by 5 degrees longitude. The recommended useful vertical range is from 261 to 0.0215 hPa, and the vertical resolution is between 2.5 and 6 km. Users of the ML3DBO3 data product should read chapter 4 and section 3.18 of the EOS MLS Level 2 Version 5 Quality Document for more information.The data files are archived in the netCDF4 format, which is also compatible with HDF5 readers and tools. Each file contains six group objects: lat-lon map vs pressure, lat vs pressure zonal mean, lat-lon map vs "potential temperature", lat vs "potential temperature" zonal mean, "equivalent latitude" vs "potential temperature" zonal mean, and vortex average vs "potential temperature". These are further subdivided into groups with all valid, ascending orbit, descending orbit, daytime (SZA < 90), and nighttime (SZA > 110) profiles. Each group has a set of data (average, min, max, std dev, rms) and geolocation fields, grid attributes, and metadata.
SBUV2/NOAA-14 Ozone (O3) Nadir Profile and Total Column 1 Day L2 V1 (SBUV2N14L2) at GES DISC
The Solar Backscattered Ultraviolet (SBUV) from NOAA-14 Level-2 daily product (SBUV2N14L2) contains ozone nadir profile and total column data from retrievals generated from the v8.6 SBUV algorithm. The v8.6 SBUV algorithm estimates the ozone nadir profile and total column from SBUV measurements using 1) the Brion-Daumont-Malicet ozone cross sections, 2) an OMI-derived cloud-height climatology, 3) a revised a priori ozone climatology, and 4) inter-instrument calibration based on comparisons with no local time difference.The SBUV2N14L2 product is written as daily files using the HDF5 format, with file sizes ranging from about 1 to 5 Mbytes. Data are available from March 1995 through September 2006. The SBUV2N14L2 data product was used as input in creating the SBUV2N14L3zm monthly zonal mean data product.
TROPESS Chemical Reanalysis O3 Spread Monthly 3-dimensional Product V1 (TRPSCRO3SM3D) at GES DISC
The TROPESS Chemical Reanalysis O3 Spread Monthly 3-dimensional Product contains the ozone ensemble spread, a measure of data assimilation analysis uncertainty. The data are part of the Tropospheric Chemical Reanalysis v2 (TCR-2) for the period 2005-2021. TCR-2 uses JPL's Multi-mOdel Multi-cOnstituent Chemical (MOMO-Chem) data assimilation framework that simultaneously optimizes both concentrations and emissions of multiple species from multiple satellite sensors.The data files are written in the netCDF version 4 file format, and each file contains a year of data at monthly resolution, and a spatial resolution of 1.125 x 1.125 degrees at 27 pressure levels between 1000 and 60 hPa. The principal investigator for the TCR-2 data is Miyazaki, Kazuyuki.
OMI/Aura Ozone (O3) DOAS Total Column Daily L3 1 day 0.25 degree x 0.25 degree V3 (OMDOAO3e) at GES DISC
The OMI science team produces this Level-3 Aura/OMI Global OMDOAO3e Data Products (0.25deg Lat/Lon grids). This Level-3 global total column ozone product is derived from OMDOAO3 which is based on the Differential Absorption Spectroscopy (DOAS) fitting technique that essentially uses the OMI visible radiance values between 331.1 and 336.1 nm. In addition to the total ozone column (best quality data, satisfying the shortest path length) and its precision this product also contains some ancillary parameters such as cloud fraction, cloud height, etc. The short name for this Level-3 OMI ozone product is OMDOAO3e and the lead Algorithm scientist for this product and for OMDOAO3 (the data source of OMDOAO3e) is Dr. Pepijn Veefkind from KNMI.The OMDOAO3e product files are stored in the version 5 Hierarchical Data Format (HDF-EOS5). Each daily file contains data from the day lit portion of the orbits (approximately 14 orbits) and is roughly 8 MB in size.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.