Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
2,942
datasets available to search
ShareScore release 0.9.0
Dataset results
2,942 results for “community data”
Data from: Limited refugia and high velocity range-shifts predicted for bat communities in drought-risk areas of the Northern Hemisphere
Open the record for dataset details and reuse information.
Data from: Environmental context shapes the long‐term role of nutrients in driving producer community trajectories in a top‐down dominated marine ecosystem
Open the record for dataset details and reuse information.
Data from: Integrating ontogeny and ontogenetic dependency into community assembly
Open the record for dataset details and reuse information.
Data for: Community science reveals high diversity of nectaring plants visited by painted lady butterflies (Lepidoptera: Nymphalidae) in California sage scrub
Open the record for dataset details and reuse information.
Data from: Differential habitat use and recruitment facilitate coexistence in a community with intraguild predation
Open the record for dataset details and reuse information.
Data from: Biological modification of coastal pH depends on community composition and time
Open the record for dataset details and reuse information.
Freshwater macroinvertebrate community composition and diversity data from lagoons on Navarino Island, Chile
This study was carried out during the austral summer of 2015 (15 January to 15 February) and assessed freshwater macroinvertebrate diversity associated with lakes and ponds along the altitudinal gradient of the Róbalo river watershed, located in the Magellanic sub-Antarctic ecoregion. The latter has a steep elevational gradient, peaking at around 1000 m a.s.l., and marked changes in temperature and landscape composition can be observed over relatively short distances. Four lagoons were chosen, as they were located on different altitudinal levels, thus allowing for comparison between the different zones found within the gradient. Along with the physical description of each lagoon (temperature, pH and conductivity), the surrounding habitats were characterized. Within each lagoon, four different habitat types were identified based on substrate composition, and the presence/absence and type of vegetation (vascular or non-vascular).
EDI and NEON dataset descriptions and coverage to support the paper "ecocomDP: A flexible data design pattern for ecological community survey data"
This dataset contains an inventory for the paper entitled "ecocomDP: A flexible data design pattern for ecological community survey data" (O'Brien et al), submitted to Ecological Informatics. The paper describes an approach for harmonizing and reformatting community survey data such as organism abundance or cover measurements. Data currently using this data model and workflow approach are from the repository of the Environmental Data Initiative (EDI), the Long Term Ecological Research (LTER) Network, and the National Ecological Observatory Network (NEON). Data were assembled for this analysis in late 2020. The inventory is composed of two tables, describing data from EDI (including LTER) and data from NEON. The EDI inventory includes information for 70 datasets: identifiers for both the original and converted datasets, and basic coverage information such as temporal coverage (range of years and a measurement of sampling evenness), spatial coverage (maximum bounding coordinates and area of the "bounding box"), and taxonomic coverage (taxonomic classes). The NEON inventory contains information from 11 continent-wide NEON data products, divided into individual field sites to be more spatially compatible with EDI and LTER data. Taxonomic coverage is by group (e.g., algae, birds) rather than explicit taxonomic classes. Spatial coverage is the area of a field sampling site polygon. Temporal coverage includes the same minimum and maximum sampling years and temporal evenness measures as for the EDI data plus a count of months during that period when sampling occurred. At the time of data download, NEON data was considered provisional, however identifiers are persistent and now deliver final, "released" data. Also included in the data package is a script to reformat inventory data and create Figure 3 of the paper.
Point Count Bird Censusing Data Subset for Paper 'EFFECTS OF LAND USE AND VEGETATION COVER ON BIRD COMMUNITIES' Walker et. al
Animals utilize their environment across a range of scales, which is bounded by their extent, the broadest spatial area which organisms respond to their environment within their lifetime, and the spatial grain, the smallest area they respond to their environment (Kotlier and Wiens 1990). Within this range, organisms likely respond to their environment at a hierarchy of levels. Johnson (1980) recognizes four distinct levels of hierarchical habitat selection. At the very largest scale, first order selection, includes the entire area that an organism utilizes within its lifetime, and is also known as an organisms global home range or extent. In contrast, second order selection is an organisms local home range, or the area that it occupies within a unique ecosystem. This distinction is most apparent with migratory animals who utilize more than one distinct landscape for their survival (i.e. summer vs. winter feeding grounds), and much less so for organisms resident of one specific landscape for their entire life span. Third order selection is the selection of specific habitat patches within an ecosystem. For example, a Monarch butterfly would tend to select patches of milkweed within a prairie. And the lowest level, fourth order selection, involves the physical procurement of food within a selected patch, in our example, specific flowers within a milkweed patch, and is also known as grain. Realizing the importance of hierarchical habitat selection, it has become apparent that single-scale studies of animals responses to their environment may fail to adequately represent how that specific animal is responding to ecological parameter of interest, especially if they are not responding to the landscape at that scale (Holling 1992). The range of scales which an animal of interest is utilizing a landscape is important to determine prior to any further ecological investigation, as inappropriate scalar mismatch between organism and environment can lead to ambiguous or even dece
Full aboveground harvest data: Interactive Effects of Fertility and Distribution on Plant Community Diversity and Structure
There are four levels of nitrogen, corresponding to treatments A, C, F and G in E001, applied at the same time as in that experiment. For a description of fertilizer added to E052, see file fertilization details. There are four levels of soil disturbance designated 1, 2, 3 and 4. Level 1: undisturbed Level 2: 1 pass with a 7 HP Honda rear-tined rototiller with the elevator set to till to a depth of 9 inches Level 3: 2 passes or however many required to produce about 50% bare ground Level 4: 3 passes or however many required to produce 100% bare ground. This requires 3 passes in some plots but 5 or 6 in others. In addition, all woody vegetation not destroyed by tilling is cut at the base. Rototilling is applied in late April. Each fertilization treatment receives each disturbance treatment, for a total of sixteen treatments. There are four replicates of each of the sixteen treatments. In addition, the four extreme ends (lowest N, lowest disturbance; highest N, lowest disturbance, etc. ) are replicated an additional ten times. Treatments are applied in a completely randomized design. Each of the 104 plots is 5m x 5m. Measurements taken at E052 will include: 1) species abundances, 2) community biomass allocation to leaves/roots/stems/flowers, 3) above and below ground net primary production and 4) rates of nitrogen mineralization. For a list of treatments, see the treatment layouts in file trmte52. The plots in E052 are enclosed by a fence to exclude mammalian herbivores. Galvanized welded-wire hardware cloth with 6mm x 6mm openings was buried to a depth of 50cm. Additional hardware cloth extends 60cm above the ground and poultry netting extends to 2m above the ground. In 1990, ten plots of each of four treatments (N1D1, N1D4, N4D1, N4D4, where N is the level of nitrogen added and D is the disturbance treatment) were randomly selected for the competition experiment. The above and belowground effects of neighbors on transplanted grass seedlings were measured using three
Leaf length data: Interactive Effects of Fertility and Distribution on Plant Community Diversity and Structure
There are four levels of nitrogen, corresponding to treatments A, C, F and G in E001, applied at the same time as in that experiment. For a description of fertilizer added to E052, see file fertilization details. There are four levels of soil disturbance designated 1, 2, 3 and 4. Level 1: undisturbed Level 2: 1 pass with a 7 HP Honda rear-tined rototiller with the elevator set to till to a depth of 9 inches Level 3: 2 passes or however many required to produce about 50% bare ground Level 4: 3 passes or however many required to produce 100% bare ground. This requires 3 passes in some plots but 5 or 6 in others. In addition, all woody vegetation not destroyed by tilling is cut at the base. Rototilling is applied in late April. Each fertilization treatment receives each disturbance treatment, for a total of sixteen treatments. There are four replicates of each of the sixteen treatments. In addition, the four extreme ends (lowest N, lowest disturbance; highest N, lowest disturbance, etc. ) are replicated an additional ten times. Treatments are applied in a completely randomized design. Each of the 104 plots is 5m x 5m. Measurements taken at E052 will include: 1) species abundances, 2) community biomass allocation to leaves/roots/stems/flowers, 3) above and below ground net primary production and 4) rates of nitrogen mineralization. For a list of treatments, see the treatment layouts in file trmte52. The plots in E052 are enclosed by a fence to exclude mammalian herbivores. Galvanized welded-wire hardware cloth with 6mm x 6mm openings was buried to a depth of 50cm. Additional hardware cloth extends 60cm above the ground and poultry netting extends to 2m above the ground. In 1990, ten plots of each of four treatments (N1D1, N1D4, N4D1, N4D4, where N is the level of nitrogen added and D is the disturbance treatment) were randomly selected for the competition experiment. The above and belowground effects of neighbors on transplanted grass seedlings were measured using three
Seedling data: Interactive Effects of Fertility and Distribution on Plant Community Diversity and Structure
There are four levels of nitrogen, corresponding to treatments A, C, F and G in E001, applied at the same time as in that experiment. For a description of fertilizer added to E052, see file fertilization details. There are four levels of soil disturbance designated 1, 2, 3 and 4. Level 1: undisturbed Level 2: 1 pass with a 7 HP Honda rear-tined rototiller with the elevator set to till to a depth of 9 inches Level 3: 2 passes or however many required to produce about 50% bare ground Level 4: 3 passes or however many required to produce 100% bare ground. This requires 3 passes in some plots but 5 or 6 in others. In addition, all woody vegetation not destroyed by tilling is cut at the base. Rototilling is applied in late April. Each fertilization treatment receives each disturbance treatment, for a total of sixteen treatments. There are four replicates of each of the sixteen treatments. In addition, the four extreme ends (lowest N, lowest disturbance; highest N, lowest disturbance, etc. ) are replicated an additional ten times. Treatments are applied in a completely randomized design. Each of the 104 plots is 5m x 5m. Measurements taken at E052 will include: 1) species abundances, 2) community biomass allocation to leaves/roots/stems/flowers, 3) above and below ground net primary production and 4) rates of nitrogen mineralization. For a list of treatments, see the treatment layouts in file trmte52. The plots in E052 are enclosed by a fence to exclude mammalian herbivores. Galvanized welded-wire hardware cloth with 6mm x 6mm openings was buried to a depth of 50cm. Additional hardware cloth extends 60cm above the ground and poultry netting extends to 2m above the ground. In 1990, ten plots of each of four treatments (N1D1, N1D4, N4D1, N4D4, where N is the level of nitrogen added and D is the disturbance treatment) were randomly selected for the competition experiment. The above and belowground effects of neighbors on transplanted grass seedlings were measured using three
Root biomass data: Interactive Effects of Fertility and Distribution on Plant Community Diversity and Structure
There are four levels of nitrogen, corresponding to treatments A, C, F and G in E001, applied at the same time as in that experiment. For a description of fertilizer added to E052, see file fertilization details. There are four levels of soil disturbance designated 1, 2, 3 and 4. Level 1: undisturbed Level 2: 1 pass with a 7 HP Honda rear-tined rototiller with the elevator set to till to a depth of 9 inches Level 3: 2 passes or however many required to produce about 50% bare ground Level 4: 3 passes or however many required to produce 100% bare ground. This requires 3 passes in some plots but 5 or 6 in others. In addition, all woody vegetation not destroyed by tilling is cut at the base. Rototilling is applied in late April. Each fertilization treatment receives each disturbance treatment, for a total of sixteen treatments. There are four replicates of each of the sixteen treatments. In addition, the four extreme ends (lowest N, lowest disturbance; highest N, lowest disturbance, etc. ) are replicated an additional ten times. Treatments are applied in a completely randomized design. Each of the 104 plots is 5m x 5m. Measurements taken at E052 will include: 1) species abundances, 2) community biomass allocation to leaves/roots/stems/flowers, 3) above and below ground net primary production and 4) rates of nitrogen mineralization. For a list of treatments, see the treatment layouts in file trmte52. The plots in E052 are enclosed by a fence to exclude mammalian herbivores. Galvanized welded-wire hardware cloth with 6mm x 6mm openings was buried to a depth of 50cm. Additional hardware cloth extends 60cm above the ground and poultry netting extends to 2m above the ground. In 1990, ten plots of each of four treatments (N1D1, N1D4, N4D1, N4D4, where N is the level of nitrogen added and D is the disturbance treatment) were randomly selected for the competition experiment. The above and belowground effects of neighbors on transplanted grass seedlings were measured using three
Plant species percent cover data: Interactive Effects of Fertility and Distribution on Plant Community Diversity and Structure
There are four levels of nitrogen, corresponding to treatments A, C, F and G in E001, applied at the same time as in that experiment. For a description of fertilizer added to E052, see file fertilization details. There are four levels of soil disturbance designated 1, 2, 3 and 4. Level 1: undisturbed Level 2: 1 pass with a 7 HP Honda rear-tined rototiller with the elevator set to till to a depth of 9 inches Level 3: 2 passes or however many required to produce about 50% bare ground Level 4: 3 passes or however many required to produce 100% bare ground. This requires 3 passes in some plots but 5 or 6 in others. In addition, all woody vegetation not destroyed by tilling is cut at the base. Rototilling is applied in late April. Each fertilization treatment receives each disturbance treatment, for a total of sixteen treatments. There are four replicates of each of the sixteen treatments. In addition, the four extreme ends (lowest N, lowest disturbance; highest N, lowest disturbance, etc. ) are replicated an additional ten times. Treatments are applied in a completely randomized design. Each of the 104 plots is 5m x 5m. Measurements taken at E052 will include: 1) species abundances, 2) community biomass allocation to leaves/roots/stems/flowers, 3) above and below ground net primary production and 4) rates of nitrogen mineralization. For a list of treatments, see the treatment layouts in file trmte52. The plots in E052 are enclosed by a fence to exclude mammalian herbivores. Galvanized welded-wire hardware cloth with 6mm x 6mm openings was buried to a depth of 50cm. Additional hardware cloth extends 60cm above the ground and poultry netting extends to 2m above the ground. In 1990, ten plots of each of four treatments (N1D1, N1D4, N4D1, N4D4, where N is the level of nitrogen added and D is the disturbance treatment) were randomly selected for the competition experiment. The above and belowground effects of neighbors on transplanted grass seedlings were measured using three
Plant aboveground biomass data: Interactive Effects of Fertility and Distribution on Plant Community Diversity and Structure
There are four levels of nitrogen, corresponding to treatments A, C, F and G in E001, applied at the same time as in that experiment. For a description of fertilizer added to E052, see file fertilization details. There are four levels of soil disturbance designated 1, 2, 3 and 4. Level 1: undisturbed Level 2: 1 pass with a 7 HP Honda rear-tined rototiller with the elevator set to till to a depth of 9 inches Level 3: 2 passes or however many required to produce about 50% bare ground Level 4: 3 passes or however many required to produce 100% bare ground. This requires 3 passes in some plots but 5 or 6 in others. In addition, all woody vegetation not destroyed by tilling is cut at the base. Rototilling is applied in late April. Each fertilization treatment receives each disturbance treatment, for a total of sixteen treatments. There are four replicates of each of the sixteen treatments. In addition, the four extreme ends (lowest N, lowest disturbance; highest N, lowest disturbance, etc. ) are replicated an additional ten times. Treatments are applied in a completely randomized design. Each of the 104 plots is 5m x 5m. Measurements taken at E052 will include: 1) species abundances, 2) community biomass allocation to leaves/roots/stems/flowers, 3) above and below ground net primary production and 4) rates of nitrogen mineralization. For a list of treatments, see the treatment layouts in file trmte52. The plots in E052 are enclosed by a fence to exclude mammalian herbivores. Galvanized welded-wire hardware cloth with 6mm x 6mm openings was buried to a depth of 50cm. Additional hardware cloth extends 60cm above the ground and poultry netting extends to 2m above the ground. In 1990, ten plots of each of four treatments (N1D1, N1D4, N4D1, N4D4, where N is the level of nitrogen added and D is the disturbance treatment) were randomly selected for the competition experiment. The above and belowground effects of neighbors on transplanted grass seedlings were measured using three
Root biomass data: Natural Enemies, Plant Diversity and Plant Community Composition
The purpose of this experiment is to determine the influences of natural enemies, including plant pathogenic fungi and insect pests, influence plant community composition, productivity, and diversity over time. The experiment is being conducted in a subset of plots within the Big Biodiversity field, including monoculture, 2-species, 4-species, 8-species, 16-species, and 32-species plots. There are 5 different treatments: foliar fungicide, soil drench fungicide, foliar insecticide, the combination of all pesticides, and nontreated control. The pesticides are applied repeatedly throughout the growing season. Within the plots, community productivity, species composition, percent cover, and pest damage are being quantified over time.
Plant aboveground biomass data: Herbivory by Nitrogen Interactive Effects on Community and Ecosystem Processes and Dynamics
E172 is an herbivory experiment established by Dave Tilman in fall 2004 by enclosing in deer fences three randomly selected plots from the six replicates of each control and each treatment in the N addition E001 experiment in field C. These plots still receive the nutrient treatments prescribed in the Experiment 001 protocols. From 1982-2004 a fence containing all of e001 plots in Field C was designed to exclude deer and all small mammals, including mice, voles and pocket gophers. This fence was removed in Fall of 2004 and individual plots designated for e172 were enclosed in deer fences. The purpose of E001 was to measure how adding nitrogen over a long time would affect the number of species, the type of species present, the amount of annual growth, and the change from year to year in the growth of each species in a plant community which is also relieved of grazing by large and small mammals. There are 8 different levels of nitrogen addition with other nutrients added to ensure that nitrogen remains the limiting nutrient, and a control which receives no nutrients. The plots are in a 6 by 9 grid and are 4 by 4 meters in size with 1 meter aisles between plots. Nitrogen fertilizer (NH4NO3) is applied twice per year, once in early May and once in late June.
Root biomass data: Herbivory by Nitrogen Interactive Effects on Community and Ecosystem Processes and Dynamics
E172 is an herbivory experiment established by Dave Tilman in fall 2004 by enclosing in deer fences three randomly selected plots from the six replicates of each control and each treatment in the N addition E001 experiment in field C. These plots still receive the nutrient treatments prescribed in the Experiment 001 protocols. From 1982-2004 a fence containing all of e001 plots in Field C was designed to exclude deer and all small mammals, including mice, voles and pocket gophers. This fence was removed in Fall of 2004 and individual plots designated for e172 were enclosed in deer fences. The purpose of E001 was to measure how adding nitrogen over a long time would affect the number of species, the type of species present, the amount of annual growth, and the change from year to year in the growth of each species in a plant community which is also relieved of grazing by large and small mammals. There are 8 different levels of nitrogen addition with other nutrients added to ensure that nitrogen remains the limiting nutrient, and a control which receives no nutrients. The plots are in a 6 by 9 grid and are 4 by 4 meters in size with 1 meter aisles between plots. Nitrogen fertilizer (NH4NO3) is applied twice per year, once in early May and once in late June.
Root carbon/nitrogen data: Herbivory by Nitrogen Interactive Effects on Community and Ecosystem Processes and Dynamics
E172 is an herbivory experiment established by Dave Tilman in fall 2004 by enclosing in deer fences three randomly selected plots from the six replicates of each control and each treatment in the N addition E001 experiment in field C. These plots still receive the nutrient treatments prescribed in the Experiment 001 protocols. From 1982-2004 a fence containing all of e001 plots in Field C was designed to exclude deer and all small mammals, including mice, voles and pocket gophers. This fence was removed in Fall of 2004 and individual plots designated for e172 were enclosed in deer fences. The purpose of E001 was to measure how adding nitrogen over a long time would affect the number of species, the type of species present, the amount of annual growth, and the change from year to year in the growth of each species in a plant community which is also relieved of grazing by large and small mammals. There are 8 different levels of nitrogen addition with other nutrients added to ensure that nitrogen remains the limiting nutrient, and a control which receives no nutrients. The plots are in a 6 by 9 grid and are 4 by 4 meters in size with 1 meter aisles between plots. Nitrogen fertilizer (NH4NO3) is applied twice per year, once in early May and once in late June.
Crowd and community sourcing to update authoritative LULC data in urban areas
<p>The French National Mapping Agency (Institut National de l'Information Géographique et Forestière - IGN) is responsible for producing and maintaining the spatial data sets for all of France. At the same time, they must satisfy the needs of different stakeholders who are responsible for decisions at multiple levels from local to national. IGN produces many different maps including detailed road networks and land cover/land use maps over time. The information contained in these maps is crucial for many of the decisions made about urban planning, resource management and landscape restoration as well as other environmental issues in France. Recently, IGN has started the process of creating a high-resolution land use land cover (LULC) maps, aimed at developing smart and accurate monitoring services of LULC over time. To help update and validate the French LULC database, citizens and interested stakeholders can contribute using the <a href="https://paysages.ign.fr/">Paysages</a> mobile and web applications. This approach presents an opportunity to evaluate the integration of citizens in the IGN process of updating and validating LULC data.</p> <p><strong>Dataset 1: Change detection validation 2019</strong></p> <p>This dataset contains web-based validations of changes detected by time series (2016 – 2019) analysis of Sentinel-2 satellite imagery. Validation was conducted using two high resolution orthophotos from respectively 2016 and 2019 as reference data. Two tools have been used: <a href="https://paysages.ign.fr/">Paysages</a> web application and <a href="https://laco-wiki.net/">LACO-Wiki</a>. Both tools used the same validation design: blind validation and the same options. For each detected change, contributors are asked to validate if there is a change and if it is the case then to choose a LU or LC class from a pre-defined list of classes.</p> <p>The dataset has the following characteristics:</p> <ul> <li>Time period of the change detection: 2016-2019.</li> <li>Time period of data collection: February 2019-December 2019</li> <li>Total number of contributors: 105</li> <li>Number of validated changes: 1048; each change was validated by between 1 to 6 contributors.</li> <li>Region of interest: Toulouse and surrounding areas</li> </ul> <p>Associated files: 1- Change validation locations.png, 1-Change validation 2019 – Attributes.csv, 1-Change validation 2019.csv, 1-Change validation 2019.geoJSON</p> <p>This dataset is licensed under a Creative Commons Attribution 4.0 International. It is attributed to the <a href="https://landsense.eu/">LandSense Citizen Observatory</a>, <a href="http://www.ign.fr/">IGN-France</a>, and <a href="https://www.geoville.com/">GeoVille</a>.</p> <p><strong>Dataset 2: Land use classification 2019</strong></p> <p>The aim of this data collection campaign was to improve the LU classification of authoritative LULC data (<a href="https://geoservices.ign.fr/documentation/diffusion/telechargement-donnees-libres.html#ocs-ge">OCS-GE 2016</a> ©IGN) for built-up area. Using the Paysages web platform, contributors are asked to choose a land use value among a list of pre-defined values for each location. </p> <p>The dataset has the following characteristics:</p> <ul> <li>Time period of data collection: August 2019</li> <li>Types of contributors: Surveyors from the production department of IGN</li> <li>Total number of contributors: 5</li> <li>Total number of observations: 2711</li> <li><a href="https://geoservices.ign.fr/ressources_documentaires/Espace_documentaire/BASES_VECTORIELLES/OCS_GE/DC_OCS_GE_1-1.pdf">Data specifications of the OCS-GE</a> ©IGN</li> <li>Region of interest: Toulouse and surrounding areas</li> </ul> <p>Associated files: 2- LU classification points.png, 2-LU classification 2019 – Attributes.csv, 2-LU classification 2019.csv, 2-LU classification 2019.geoJSON</p> <p>This dataset is licensed under a Creative Commons Attribution 4.0 International. It is attributed to the <a href="https://landsense.eu/">LandSense Citizen Observatory</a>, <a href="http://www.ign.fr/">IGN-France</a> and the <a href="https://iiasa.ac.at/">International Institute for Applied Systems Analysis</a>.</p> <p><strong>Dataset 3: In-situ validation 2018</strong></p> <p>The aim of this data collection campaign was to collect in-situ (ground-based) information, using the Paysages mobile application, to update authoritative LULC data. Contributors visit pre-determined locations, take photographs, of the point location and in the four cardinal directions away from the point and answer a few questions with respect with the task. Two tasks were defined: </p> <ul> <li>Classify the point by choosing a LU class between three classes: industrial (US2), commercial (US3) or residential (US5).</li> <li>Validate changes detected by the LandSense Change Detection Service: for each new detected change, the contributor was requested to validate the change and choose a LU and LC class from a pre-defined list of classes.</li> </ul> <p>The dataset has the following characteristics </p> <ul> <li>Time period of data collection: June 2018 – October 2018</li> <li>Types of contributors: students from the School of Agricultural and Life Sciences and citizens</li> <li>Total number of contributors: 26</li> <li>Total number of observations: 281</li> <li>Total number of photos: 421</li> <li>Region of interest: Toulouse and surrounding areas</li> </ul> <p>Associated files: 3- Insitu locations.png, 3- Insitu validation 2018 – Attributes.csv, 3- Insitu validation 2018.csv, 3- Insitu validation 2018.geoJSON</p> <p>This dataset is licensed under a Creative Commons Attribution 4.0 International. It is attributed to the <a href="https://landsense.eu/">LandSense Citizen Observatory</a>, <a href="http://www.ign.fr/">IGN-France</a>.</p> <p>This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no 689812.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.