Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
10,801
datasets available to search
ShareScore release 0.9.0
Dataset results
10,801 results for “data correction”
iSMNN: batch effect correction for single-cell RNA-seq data via iterative supervised mutual nearest neighbor refinement
GEO Series GSE161138. Mus musculus. 1 samples. Type: Expression profiling by high throughput sequencing.
Data from: Correct calculation of CO2 efflux using a closed-chamber linked to a non-dispersive infrared gas analyzer
1. Improved understanding of the carbon (C) cycle is essential to model future climates and how this may feedback to affect greenhouse-gas fluxes. 2 .We summarize previous work quantifying respiration rates of organic substrates and briefly discuss how advances in technology, specifically the use of chambers linked to a non-dispersive infra-red gas analyzer (NDIR), can be applied to assess carbon dynamics from short-term field measurements. This technology hastens measurement and is relatively inexpensive, enabling researchers to increase replication and investigate temporal and spatial variation. 3. We describe the theory behind calculations of CO2 efflux released through organic substrates, when using a closed-chamber linked to a NDIR. These methods can in principle be extended to any chamber-based measurement of gas fluxes, including partially closed chambers as used for soil surface CO2, nitrous oxide or methane effluxes and stem CO2 respiration, although additional assumptions may apply. 4. We show that incorrect application of formulae in some earlier studies resulted in either under- or over-estimation of CO2 effluxes. Of the studies we reviewed measuring the respiration of woody debris, leaf-litter, or woody stems using closed chambers linked to a NDIR, only 22% (11 of 51) provided the equations used to calculate CO2 efflux, and 72% (8 of 11) of those provided contained basic errors. Using our data on the decomposition of woody debris as an example, we found that such mistakes resulted in anywhere from 8% underestimation to 22% overestimation of CO2 efflux. The errors varied among studies and hence may limit understanding of the factors affecting emissions of CO2 and our ability to incorporate this knowledge into global carbon models. 5. We provide formulae for the correct calculation of respiration rates in future studies using closed-chambers and thus provide a basis for comparative studies of factors affecting CO2 efflux from woody debris, leaf litter and other substrates. Ultimately this will contribute to improved parameterization of forest respiration.
Data used in generation of results in 'Bias Correction of Climate Models using a Bayesian Hierarchical Model' J.Carter et. al.
<p>The data used in generation of results in 'Bias Correction of Climate Models using a Bayesian Hierarchical Model' J.Carter et. al. The datasets are dictionaries and are saved with .npy extensions. The datasets can be loaded in Python with expressions like: 'scenario_base = np.load(f"{filepath}scenario_base_hierarchical.npy",allow_pickle="TRUE").item()'.</p>
Data and software for "Correcting Turbulence-induced Errors in Fiber Positioning for the Dark Energy Spectroscopic Instrument"
<p>Supplementary material to the DESI publication "Correcting Turbulence-induced Errors in Fiber Positioning for the Dark Energy Spectroscopic Instrument".</p> <p>The main "turbfigures.py" script generates the figures in the paper from the included data files.</p> <p>Contents:</p> <p><strong>Software files</strong></p> <ul> <li>turbfigures.py: Turbulence plotting and analysis plotting routines.</li> <li>turbulence.py: Analysis routines called by turbfigures.py. The live version of this code in production for desi is in the desimeter package (https://github.com/desihub/desimeter/blob/main/py/desimeter/turbulence.py)</li> </ul> <p><strong>Data files</strong></p> <ul> <li>coord-summary-20240124-pm.fits <ul> <li>Measured centroids of fibers in for 400 consecutive images of the focal plane while at zenith. File contains the following columns: <ul> <li>expid - exposure ID</li> <li>location - "location" of fiber in focal plane; ranges from 0 - 10000. Fibers on petal 0 have numbers between 0 and 1000, etc. There are only 500 positioners per petal, so most locations are not populated.</li> <li>move - in real data, this indexes over the moves in a DESI positioning loop; garbage information here.</li> <li>fpa_{x,y} - measured position of the fiber in this exposure</li> <li>req_{x,y} - requested position of the fiber in this exposure; not used for this data set where positioners are fixed in location</li> <li>{x,y}turb - empty in this file; gets filled in by turbfigures.py with measured turbulence</li> <li>flags_cor - flags indicating that a positioner or fiber may be problematic</li> <li>postype - flags indicating that a location corresponds to a real positioner vs. a fiducial</li> <li>expected_{x,y} - empty in this file; gets filled in by turbfigures.py with "expected" positions of each fiber, so that fpa_{x,y} - expected_{x,y} is a noisy estimate of the turbulence seen by the fiber.</li> </ul> </li> <li>Note that this file has an awkward structure. It has 10000 rows, one for each possible location. Most fields are then 400 element arrays that gives the corresponding values, corresponding to the 400 exposures present in the file.</li> </ul> </li> <li>coordinates-stats.ecsv <ul> <li>statistics of positioning accuracy and turbulence amplitude in DESI positioning loops. Measured RMSes are the 5-sigma clipped root-mean-square positioning offset in 2D: sqrt(mean(dx^2 + dy^2)). Measured medians are median(sqrt(dx^2 + dy^2)).</li> <li>Contents: <ul> <li>coord_filename - file name of DESI coordinates file statistics were drawn from</li> <li>rms_turbulence - RMS for the turbulent contribution to the positioning error</li> <li>rms_positioning - RMS for positioning after removing turbulence</li> <li>rms_total - Total RMS</li> <li>med_turbulence - median turbulence in exposure</li> <li>med_positioning - median positioning error in exposure</li> <li>med_total - median total turbulence + positioning error in exposure</li> <li>expid - exposure id number</li> </ul> </li> </ul> </li> </ul> <p>Dependencies: The included software uses the DESI software stack and otherwise the usual python astronomy packages: numpy scipy matplotlib astropy. Alternatively, people with access to NERSC can load the default DESI environment and pull in all needed dependencies.</p>
The code and data for "Deep-Learning Correction Methods for WRF Model Precipitation Forecasting from 2014 Through 2022 in Zhengzhou city, China"
<p>The code and data for “Deep-Learning Correction Methods for WRF Model Precipitation Forecasting from 2014 Through 2022 in Zhengzhou city, China”</p>
Motion Correction of Positron Emission Tomography (PET) Data Using Amplitude Gating
ClinicalTrials.gov study NCT00843219. IPD Sharing: Not stated. Countries: 1. Publications: 0.
Evaluation of the Distortion Correction Data Collection (DCDC) App Software
ClinicalTrials.gov study NCT02337647. IPD Sharing: Not stated. Countries: 1. Publications: 0.
iPSC data for the paper "Correction of dysregulated lipid metabolism normalizes gene expression in oligodendrocytes and prolongs lifespan in female poly-GA C9orf72 mouse model"
GEO Series GSE285209. Homo sapiens. 15 samples. Type: Expression profiling by high throughput sequencing.
Data from: Definition and estimation of vital rates from repeated censuses: choices, comparisons and bias corrections focusing on trees
Open the record for dataset details and reuse information.
Data from: Antipsychotic dose mediates the association between polypharmacy and corrected QT interval
Open the record for dataset details and reuse information.
Data from: Bias correction of bounded location errors in presence-only data
Open the record for dataset details and reuse information.
Data from: Correct calculation of CO2 efflux using a closed-chamber linked to a non-dispersive infrared gas analyzer
Open the record for dataset details and reuse information.
GA-CFP data for the manuscript "Correction of dysregulated lipid metabolism normalizes gene expression in oligodendrocytes and prolongs lifespan in female poly-GA C9orf72 mouse model"
GEO Series GSE289729. Mus musculus. 13 samples. Type: Expression profiling by high throughput sequencing.
BARREL 2T Tri-axial Fluxgate Magnetometer (MAGN) Magnetic Field Data, no Gain Correction, not Despun, Level 2, 0.25 s Data
Three axis DC magnetometer data with nominal conversions applied. Data are neither gain corrected nor despun.The BARREL Mission was a multiple-balloon investigation designed to study electron losses from Earth's Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL was designed to augment the Radiation Belt Storm Probes, RBSP, mission by providing measurements of the spatial and temporal variations of electron precipitation from the radiation belts. The RBSP mission has since been renamed the Van Allen Probes mission. Each BARREL balloon carried an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL observations collected near latitudes close to either the antarctic and arctic circles at stratospheric altitudes at about 30 km. The BARREL instrumentation provided the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles were available. Also, the BARREL data has been used to characterize the spatial scale of precipitation at relativistic energies.The initial pair of balloon campaigns that were conducted initially during the Austral summer months of January and February of 2013 and 2014 with launches from two stations located in Antarctica: the British base located at Halley Bay on the Brunt Ice Shelf and the South African SANAE IV base (SANAE stand for South African National Antarctic Expedition) located in Vesleskarvet, Queen Maud Land. For the 2013 and 2014 the balloon campaigns, the launch plan was designed to maintain an array with about five payloads spread across about six hours of magnetic local time, MLT, in the region that magnetically maps to the radiation belts. Thus, the BARREL balloon constellation constituted an evolving and slowly moving array able to study relativistic electron precipitation from the radiation belts.Later campaigns were undertaken in 2015 and 2016 from the Esrange Space Center located in Kiruna, Sweden. The 2015 and 2016 campaigns were undertaken in coordination with the Van Allen Probes mission, the European Incoherent Scatter Scientific Association, EISCAT, incoherent scatter radar system, and other ground and space based instruments. Seven balloon launches occurred during the August 2015 BARREL campaign. A total of eight flights occurred during August 2016.Summing over the four BARREL campaigns, over 50 small, approximately 20 kg, stratospheric balloons were successively launched. The website creeated and hosted by A.J. Halford (see Information URL below) reports that: "By the end of the campaigns, there were over 90 researchers coordinating on a daily basis with the BARREL team working on 7 different satellite missions, 1 other balloon mission, and way too many ground based instruments to count." Although the BARREL mission launched only balloons during the years from 2013 to 2016, research using data collected on these flights is ongoing, so stay tuned for updates! All data and analysis software are freely available to the scientific community.The information listed above in this resource description was compiled by referencing several BARREL related resources including primarily the Millan et al. (2013) Space Science Reviews publication, the BARREL at Dartmouth mission web site, and the website maintained by A.J. Halford.The current release of all BARREL CDF data products are Version 10 files.BARREL will make all its scientific data products quickly and publicly available but all users are expected to read and follow the BARREL Data Usage Policy listed below.BARREL Data Usage PolicyBARREL data products are made freely available to the public and every effort is made to ensure that these products are of the highest quality. However, there may occasionally be issues with either the instruments or data processing that affect the accuracy of data. When possible, a quality flag is included in higher level data products, and known issues are posted in the BARREL data repository. You are also strongly encouraged to follow the guidelines below if you are planning a publication or presentation in which BARREL data are used. This will help you ensure that your science results are valid.* Users should always use the highest version numbers of data and analysis tools. Browse/quick-look plots are not intended for science analysis or publication and should not be used for those purposes without consent of the principal investigator, PI.* Users should notify the BARREL PI of the data use and investigation objectives. This will ensure that you are using the data appropriately and have the most recent version of the data or analysis routines. Additionally, if a BARREL team member is already working on a similar or related topic, they may be able to contribute intellectually
BARREL 1S Tri-axial Fluxgate Magnetometer (MAGN) Magnetic Field Data, no Gain Correction, not Despun, Level 2, 0.25 s Data
Three axis DC magnetometer data with nominal conversions applied. Data are neither gain corrected nor despun.The BARREL Mission was a multiple-balloon investigation designed to study electron losses from Earth's Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL was designed to augment the Radiation Belt Storm Probes, RBSP, mission by providing measurements of the spatial and temporal variations of electron precipitation from the radiation belts. The RBSP mission has since been renamed the Van Allen Probes mission. Each BARREL balloon carried an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL observations collected near latitudes close to either the antarctic and arctic circles at stratospheric altitudes at about 30 km. The BARREL instrumentation provided the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles were available. Also, the BARREL data has been used to characterize the spatial scale of precipitation at relativistic energies.The initial pair of balloon campaigns that were conducted initially during the Austral summer months of January and February of 2013 and 2014 with launches from two stations located in Antarctica: the British base located at Halley Bay on the Brunt Ice Shelf and the South African SANAE IV base (SANAE stand for South African National Antarctic Expedition) located in Vesleskarvet, Queen Maud Land. For the 2013 and 2014 the balloon campaigns, the launch plan was designed to maintain an array with about five payloads spread across about six hours of magnetic local time, MLT, in the region that magnetically maps to the radiation belts. Thus, the BARREL balloon constellation constituted an evolving and slowly moving array able to study relativistic electron precipitation from the radiation belts.Later campaigns were undertaken in 2015 and 2016 from the Esrange Space Center located in Kiruna, Sweden. The 2015 and 2016 campaigns were undertaken in coordination with the Van Allen Probes mission, the European Incoherent Scatter Scientific Association, EISCAT, incoherent scatter radar system, and other ground and space based instruments. Seven balloon launches occurred during the August 2015 BARREL campaign. A total of eight flights occurred during August 2016.Summing over the four BARREL campaigns, over 50 small, approximately 20 kg, stratospheric balloons were successively launched. The website creeated and hosted by A.J. Halford (see Information URL below) reports that: "By the end of the campaigns, there were over 90 researchers coordinating on a daily basis with the BARREL team working on 7 different satellite missions, 1 other balloon mission, and way too many ground based instruments to count." Although the BARREL mission launched only balloons during the years from 2013 to 2016, research using data collected on these flights is ongoing, so stay tuned for updates! All data and analysis software are freely available to the scientific community.The information listed above in this resource description was compiled by referencing several BARREL related resources including primarily the Millan et al. (2013) Space Science Reviews publication, the BARREL at Dartmouth mission web site, and the website maintained by A.J. Halford.The current release of all BARREL CDF data products are Version 10 files.BARREL will make all its scientific data products quickly and publicly available but all users are expected to read and follow the BARREL Data Usage Policy listed below.BARREL Data Usage PolicyBARREL data products are made freely available to the public and every effort is made to ensure that these products are of the highest quality. However, there may occasionally be issues with either the instruments or data processing that affect the accuracy of data. When possible, a quality flag is included in higher level data products, and known issues are posted in the BARREL data repository. You are also strongly encouraged to follow the guidelines below if you are planning a publication or presentation in which BARREL data are used. This will help you ensure that your science results are valid.* Users should always use the highest version numbers of data and analysis tools. Browse/quick-look plots are not intended for science analysis or publication and should not be used for those purposes without consent of the principal investigator, PI.* Users should notify the BARREL PI of the data use and investigation objectives. This will ensure that you are using the data appropriately and have the most recent version of the data or analysis routines. Additionally, if a BARREL team member is already working on a similar or related topic, they may be able to contribute intellectually
BARREL 2L Tri-axial Fluxgate Magnetometer (MAGN) Magnetic Field Data, no Gain Correction, not Despun, Level 2, 0.25 s Data
Three axis DC magnetometer data with nominal conversions applied. Data are neither gain corrected nor despun.The BARREL Mission was a multiple-balloon investigation designed to study electron losses from Earth's Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL was designed to augment the Radiation Belt Storm Probes, RBSP, mission by providing measurements of the spatial and temporal variations of electron precipitation from the radiation belts. The RBSP mission has since been renamed the Van Allen Probes mission. Each BARREL balloon carried an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL observations collected near latitudes close to either the antarctic and arctic circles at stratospheric altitudes at about 30 km. The BARREL instrumentation provided the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles were available. Also, the BARREL data has been used to characterize the spatial scale of precipitation at relativistic energies.The initial pair of balloon campaigns that were conducted initially during the Austral summer months of January and February of 2013 and 2014 with launches from two stations located in Antarctica: the British base located at Halley Bay on the Brunt Ice Shelf and the South African SANAE IV base (SANAE stand for South African National Antarctic Expedition) located in Vesleskarvet, Queen Maud Land. For the 2013 and 2014 the balloon campaigns, the launch plan was designed to maintain an array with about five payloads spread across about six hours of magnetic local time, MLT, in the region that magnetically maps to the radiation belts. Thus, the BARREL balloon constellation constituted an evolving and slowly moving array able to study relativistic electron precipitation from the radiation belts.Later campaigns were undertaken in 2015 and 2016 from the Esrange Space Center located in Kiruna, Sweden. The 2015 and 2016 campaigns were undertaken in coordination with the Van Allen Probes mission, the European Incoherent Scatter Scientific Association, EISCAT, incoherent scatter radar system, and other ground and space based instruments. Seven balloon launches occurred during the August 2015 BARREL campaign. A total of eight flights occurred during August 2016.Summing over the four BARREL campaigns, over 50 small, approximately 20 kg, stratospheric balloons were successively launched. The website creeated and hosted by A.J. Halford (see Information URL below) reports that: "By the end of the campaigns, there were over 90 researchers coordinating on a daily basis with the BARREL team working on 7 different satellite missions, 1 other balloon mission, and way too many ground based instruments to count." Although the BARREL mission launched only balloons during the years from 2013 to 2016, research using data collected on these flights is ongoing, so stay tuned for updates! All data and analysis software are freely available to the scientific community.The information listed above in this resource description was compiled by referencing several BARREL related resources including primarily the Millan et al. (2013) Space Science Reviews publication, the BARREL at Dartmouth mission web site, and the website maintained by A.J. Halford.The current release of all BARREL CDF data products are Version 10 files.BARREL will make all its scientific data products quickly and publicly available but all users are expected to read and follow the BARREL Data Usage Policy listed below.BARREL Data Usage PolicyBARREL data products are made freely available to the public and every effort is made to ensure that these products are of the highest quality. However, there may occasionally be issues with either the instruments or data processing that affect the accuracy of data. When possible, a quality flag is included in higher level data products, and known issues are posted in the BARREL data repository. You are also strongly encouraged to follow the guidelines below if you are planning a publication or presentation in which BARREL data are used. This will help you ensure that your science results are valid.* Users should always use the highest version numbers of data and analysis tools. Browse/quick-look plots are not intended for science analysis or publication and should not be used for those purposes without consent of the principal investigator, PI.* Users should notify the BARREL PI of the data use and investigation objectives. This will ensure that you are using the data appropriately and have the most recent version of the data or analysis routines. Additionally, if a BARREL team member is already working on a similar or related topic, they may be able to contribute intellectually
BARREL 3A Tri-axial Fluxgate Magnetometer (MAGN) Magnetic Field Data, no Gain Correction, not Despun, Level 2, 0.25 s Data
Three axis DC magnetometer data with nominal conversions applied. Data are neither gain corrected nor despun.The BARREL Mission was a multiple-balloon investigation designed to study electron losses from Earth's Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL was designed to augment the Radiation Belt Storm Probes, RBSP, mission by providing measurements of the spatial and temporal variations of electron precipitation from the radiation belts. The RBSP mission has since been renamed the Van Allen Probes mission. Each BARREL balloon carried an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL observations collected near latitudes close to either the antarctic and arctic circles at stratospheric altitudes at about 30 km. The BARREL instrumentation provided the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles were available. Also, the BARREL data has been used to characterize the spatial scale of precipitation at relativistic energies.The initial pair of balloon campaigns that were conducted initially during the Austral summer months of January and February of 2013 and 2014 with launches from two stations located in Antarctica: the British base located at Halley Bay on the Brunt Ice Shelf and the South African SANAE IV base (SANAE stand for South African National Antarctic Expedition) located in Vesleskarvet, Queen Maud Land. For the 2013 and 2014 the balloon campaigns, the launch plan was designed to maintain an array with about five payloads spread across about six hours of magnetic local time, MLT, in the region that magnetically maps to the radiation belts. Thus, the BARREL balloon constellation constituted an evolving and slowly moving array able to study relativistic electron precipitation from the radiation belts.Later campaigns were undertaken in 2015 and 2016 from the Esrange Space Center located in Kiruna, Sweden. The 2015 and 2016 campaigns were undertaken in coordination with the Van Allen Probes mission, the European Incoherent Scatter Scientific Association, EISCAT, incoherent scatter radar system, and other ground and space based instruments. Seven balloon launches occurred during the August 2015 BARREL campaign. A total of eight flights occurred during August 2016.Summing over the four BARREL campaigns, over 50 small, approximately 20 kg, stratospheric balloons were successively launched. The website creeated and hosted by A.J. Halford (see Information URL below) reports that: "By the end of the campaigns, there were over 90 researchers coordinating on a daily basis with the BARREL team working on 7 different satellite missions, 1 other balloon mission, and way too many ground based instruments to count." Although the BARREL mission launched only balloons during the years from 2013 to 2016, research using data collected on these flights is ongoing, so stay tuned for updates! All data and analysis software are freely available to the scientific community.The information listed above in this resource description was compiled by referencing several BARREL related resources including primarily the Millan et al. (2013) Space Science Reviews publication, the BARREL at Dartmouth mission web site, and the website maintained by A.J. Halford.The current release of all BARREL CDF data products are Version 10 files.BARREL will make all its scientific data products quickly and publicly available but all users are expected to read and follow the BARREL Data Usage Policy listed below.BARREL Data Usage PolicyBARREL data products are made freely available to the public and every effort is made to ensure that these products are of the highest quality. However, there may occasionally be issues with either the instruments or data processing that affect the accuracy of data. When possible, a quality flag is included in higher level data products, and known issues are posted in the BARREL data repository. You are also strongly encouraged to follow the guidelines below if you are planning a publication or presentation in which BARREL data are used. This will help you ensure that your science results are valid.* Users should always use the highest version numbers of data and analysis tools. Browse/quick-look plots are not intended for science analysis or publication and should not be used for those purposes without consent of the principal investigator, PI.* Users should notify the BARREL PI of the data use and investigation objectives. This will ensure that you are using the data appropriately and have the most recent version of the data or analysis routines. Additionally, if a BARREL team member is already working on a similar or related topic, they may be able to contribute intellectually
BARREL 1V Tri-axial Fluxgate Magnetometer (MAGN) Magnetic Field Data, no Gain Correction, not Despun, Level 2, 0.25 s Data
Three axis DC magnetometer data with nominal conversions applied. Data are neither gain corrected nor despun.The BARREL Mission was a multiple-balloon investigation designed to study electron losses from Earth's Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL was designed to augment the Radiation Belt Storm Probes, RBSP, mission by providing measurements of the spatial and temporal variations of electron precipitation from the radiation belts. The RBSP mission has since been renamed the Van Allen Probes mission. Each BARREL balloon carried an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL observations collected near latitudes close to either the antarctic and arctic circles at stratospheric altitudes at about 30 km. The BARREL instrumentation provided the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles were available. Also, the BARREL data has been used to characterize the spatial scale of precipitation at relativistic energies.The initial pair of balloon campaigns that were conducted initially during the Austral summer months of January and February of 2013 and 2014 with launches from two stations located in Antarctica: the British base located at Halley Bay on the Brunt Ice Shelf and the South African SANAE IV base (SANAE stand for South African National Antarctic Expedition) located in Vesleskarvet, Queen Maud Land. For the 2013 and 2014 the balloon campaigns, the launch plan was designed to maintain an array with about five payloads spread across about six hours of magnetic local time, MLT, in the region that magnetically maps to the radiation belts. Thus, the BARREL balloon constellation constituted an evolving and slowly moving array able to study relativistic electron precipitation from the radiation belts.Later campaigns were undertaken in 2015 and 2016 from the Esrange Space Center located in Kiruna, Sweden. The 2015 and 2016 campaigns were undertaken in coordination with the Van Allen Probes mission, the European Incoherent Scatter Scientific Association, EISCAT, incoherent scatter radar system, and other ground and space based instruments. Seven balloon launches occurred during the August 2015 BARREL campaign. A total of eight flights occurred during August 2016.Summing over the four BARREL campaigns, over 50 small, approximately 20 kg, stratospheric balloons were successively launched. The website creeated and hosted by A.J. Halford (see Information URL below) reports that: "By the end of the campaigns, there were over 90 researchers coordinating on a daily basis with the BARREL team working on 7 different satellite missions, 1 other balloon mission, and way too many ground based instruments to count." Although the BARREL mission launched only balloons during the years from 2013 to 2016, research using data collected on these flights is ongoing, so stay tuned for updates! All data and analysis software are freely available to the scientific community.The information listed above in this resource description was compiled by referencing several BARREL related resources including primarily the Millan et al. (2013) Space Science Reviews publication, the BARREL at Dartmouth mission web site, and the website maintained by A.J. Halford.The current release of all BARREL CDF data products are Version 10 files.BARREL will make all its scientific data products quickly and publicly available but all users are expected to read and follow the BARREL Data Usage Policy listed below.BARREL Data Usage PolicyBARREL data products are made freely available to the public and every effort is made to ensure that these products are of the highest quality. However, there may occasionally be issues with either the instruments or data processing that affect the accuracy of data. When possible, a quality flag is included in higher level data products, and known issues are posted in the BARREL data repository. You are also strongly encouraged to follow the guidelines below if you are planning a publication or presentation in which BARREL data are used. This will help you ensure that your science results are valid.* Users should always use the highest version numbers of data and analysis tools. Browse/quick-look plots are not intended for science analysis or publication and should not be used for those purposes without consent of the principal investigator, PI.* Users should notify the BARREL PI of the data use and investigation objectives. This will ensure that you are using the data appropriately and have the most recent version of the data or analysis routines. Additionally, if a BARREL team member is already working on a similar or related topic, they may be able to contribute intellectually
BARREL 3C Tri-axial Fluxgate Magnetometer (MAGN) Magnetic Field Data, no Gain Correction, not Despun, Level 2, 0.25 s Data
Three axis DC magnetometer data with nominal conversions applied. Data are neither gain corrected nor despun.The BARREL Mission was a multiple-balloon investigation designed to study electron losses from Earth's Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL was designed to augment the Radiation Belt Storm Probes, RBSP, mission by providing measurements of the spatial and temporal variations of electron precipitation from the radiation belts. The RBSP mission has since been renamed the Van Allen Probes mission. Each BARREL balloon carried an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL observations collected near latitudes close to either the antarctic and arctic circles at stratospheric altitudes at about 30 km. The BARREL instrumentation provided the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles were available. Also, the BARREL data has been used to characterize the spatial scale of precipitation at relativistic energies.The initial pair of balloon campaigns that were conducted initially during the Austral summer months of January and February of 2013 and 2014 with launches from two stations located in Antarctica: the British base located at Halley Bay on the Brunt Ice Shelf and the South African SANAE IV base (SANAE stand for South African National Antarctic Expedition) located in Vesleskarvet, Queen Maud Land. For the 2013 and 2014 the balloon campaigns, the launch plan was designed to maintain an array with about five payloads spread across about six hours of magnetic local time, MLT, in the region that magnetically maps to the radiation belts. Thus, the BARREL balloon constellation constituted an evolving and slowly moving array able to study relativistic electron precipitation from the radiation belts.Later campaigns were undertaken in 2015 and 2016 from the Esrange Space Center located in Kiruna, Sweden. The 2015 and 2016 campaigns were undertaken in coordination with the Van Allen Probes mission, the European Incoherent Scatter Scientific Association, EISCAT, incoherent scatter radar system, and other ground and space based instruments. Seven balloon launches occurred during the August 2015 BARREL campaign. A total of eight flights occurred during August 2016.Summing over the four BARREL campaigns, over 50 small, approximately 20 kg, stratospheric balloons were successively launched. The website creeated and hosted by A.J. Halford (see Information URL below) reports that: "By the end of the campaigns, there were over 90 researchers coordinating on a daily basis with the BARREL team working on 7 different satellite missions, 1 other balloon mission, and way too many ground based instruments to count." Although the BARREL mission launched only balloons during the years from 2013 to 2016, research using data collected on these flights is ongoing, so stay tuned for updates! All data and analysis software are freely available to the scientific community.The information listed above in this resource description was compiled by referencing several BARREL related resources including primarily the Millan et al. (2013) Space Science Reviews publication, the BARREL at Dartmouth mission web site, and the website maintained by A.J. Halford.The current release of all BARREL CDF data products are Version 10 files.BARREL will make all its scientific data products quickly and publicly available but all users are expected to read and follow the BARREL Data Usage Policy listed below.BARREL Data Usage PolicyBARREL data products are made freely available to the public and every effort is made to ensure that these products are of the highest quality. However, there may occasionally be issues with either the instruments or data processing that affect the accuracy of data. When possible, a quality flag is included in higher level data products, and known issues are posted in the BARREL data repository. You are also strongly encouraged to follow the guidelines below if you are planning a publication or presentation in which BARREL data are used. This will help you ensure that your science results are valid.* Users should always use the highest version numbers of data and analysis tools. Browse/quick-look plots are not intended for science analysis or publication and should not be used for those purposes without consent of the principal investigator, PI.* Users should notify the BARREL PI of the data use and investigation objectives. This will ensure that you are using the data appropriately and have the most recent version of the data or analysis routines. Additionally, if a BARREL team member is already working on a similar or related topic, they may be able to contribute intellectually
BARREL 2F Tri-axial Fluxgate Magnetometer (MAGN) Magnetic Field Data, no Gain Correction, not Despun, Level 2, 0.25 s Data
Three axis DC magnetometer data with nominal conversions applied. Data are neither gain corrected nor despun.The BARREL Mission was a multiple-balloon investigation designed to study electron losses from Earth's Radiation Belts. Selected as a NASA Living with a Star Mission of Opportunity, BARREL was designed to augment the Radiation Belt Storm Probes, RBSP, mission by providing measurements of the spatial and temporal variations of electron precipitation from the radiation belts. The RBSP mission has since been renamed the Van Allen Probes mission. Each BARREL balloon carried an X-ray spectrometer to measure the bremsstrahlung X-rays produced by precipitating relativistic electrons as they collide with neutrals in the atmosphere, and a DC magnetometer to measure ULF-timescale variations of the magnetic field. BARREL observations collected near latitudes close to either the antarctic and arctic circles at stratospheric altitudes at about 30 km. The BARREL instrumentation provided the first balloon measurements of relativistic electron precipitation while comprehensive in situ measurements of both plasma waves and energetic particles were available. Also, the BARREL data has been used to characterize the spatial scale of precipitation at relativistic energies.The initial pair of balloon campaigns that were conducted initially during the Austral summer months of January and February of 2013 and 2014 with launches from two stations located in Antarctica: the British base located at Halley Bay on the Brunt Ice Shelf and the South African SANAE IV base (SANAE stand for South African National Antarctic Expedition) located in Vesleskarvet, Queen Maud Land. For the 2013 and 2014 the balloon campaigns, the launch plan was designed to maintain an array with about five payloads spread across about six hours of magnetic local time, MLT, in the region that magnetically maps to the radiation belts. Thus, the BARREL balloon constellation constituted an evolving and slowly moving array able to study relativistic electron precipitation from the radiation belts.Later campaigns were undertaken in 2015 and 2016 from the Esrange Space Center located in Kiruna, Sweden. The 2015 and 2016 campaigns were undertaken in coordination with the Van Allen Probes mission, the European Incoherent Scatter Scientific Association, EISCAT, incoherent scatter radar system, and other ground and space based instruments. Seven balloon launches occurred during the August 2015 BARREL campaign. A total of eight flights occurred during August 2016.Summing over the four BARREL campaigns, over 50 small, approximately 20 kg, stratospheric balloons were successively launched. The website creeated and hosted by A.J. Halford (see Information URL below) reports that: "By the end of the campaigns, there were over 90 researchers coordinating on a daily basis with the BARREL team working on 7 different satellite missions, 1 other balloon mission, and way too many ground based instruments to count." Although the BARREL mission launched only balloons during the years from 2013 to 2016, research using data collected on these flights is ongoing, so stay tuned for updates! All data and analysis software are freely available to the scientific community.The information listed above in this resource description was compiled by referencing several BARREL related resources including primarily the Millan et al. (2013) Space Science Reviews publication, the BARREL at Dartmouth mission web site, and the website maintained by A.J. Halford.The current release of all BARREL CDF data products are Version 10 files.BARREL will make all its scientific data products quickly and publicly available but all users are expected to read and follow the BARREL Data Usage Policy listed below.BARREL Data Usage PolicyBARREL data products are made freely available to the public and every effort is made to ensure that these products are of the highest quality. However, there may occasionally be issues with either the instruments or data processing that affect the accuracy of data. When possible, a quality flag is included in higher level data products, and known issues are posted in the BARREL data repository. You are also strongly encouraged to follow the guidelines below if you are planning a publication or presentation in which BARREL data are used. This will help you ensure that your science results are valid.* Users should always use the highest version numbers of data and analysis tools. Browse/quick-look plots are not intended for science analysis or publication and should not be used for those purposes without consent of the principal investigator, PI.* Users should notify the BARREL PI of the data use and investigation objectives. This will ensure that you are using the data appropriately and have the most recent version of the data or analysis routines. Additionally, if a BARREL team member is already working on a similar or related topic, they may be able to contribute intellectually
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.