Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
1,574
datasets available to search
ShareScore release 0.9.0
Dataset results
1,574 results for “atmospheres”
Data from: Impacts of silicon-based grass defences across trophic levels under both current and future atmospheric CO2 scenarios
Open the record for dataset details and reuse information.
Data from: Increased root herbivory under elevated atmospheric carbon dioxide concentrations is reversed by silicon-based plant defences
Open the record for dataset details and reuse information.
Data from: How atmospheric chemistry and transport drive surface variability of N2O and CFC-11
Open the record for dataset details and reuse information.
Atmospheric particle deposition on mesquite leaves in the central Arizona-Phoenix area
One technique that has been used to analyze individual atmospheric particles is automated electron microscopy. This technique gives the size, shape, and elemental composition of individual particles and has been used successfully for particles collected on filters in particle samplers. The goal of the current project is to mimic this electron microscopy analysis technique for particles deposited on leaf surfaces. Preliminary results demonstrate that electron microscopy can be used successfully to analyze individual particles on leaf surfaces. The ability to analyze atmospheric particles on leaf surfaces leads to a specific application: determining the spatial distribution of atmospheric particles throughout urban areas, namely Phoenix. Evidence from past studies in Phoenix indicate that the distribution of particle types is non-uniform, and sampling with a limited number of particle samplers is not adequate for capturing this variability. Using leaves gives the ability to sample in more locations. In a preliminary study, three sampling locations from the Phoenix area - a desert, an urban, and a suburban site - were chosen as test sites to determine whether different particle types could be observed on leaf surfaces from the different sites. The particle types from the desert site contain only elements comprising desert dust. The particle types from the urban and suburban sites consist partially of elements found in desert dust, but they also contain sulfur, which is likely from anthropogenic sources within the urban area. These preliminary results indicate that the distribution of particle types throughout an urban area can be determined from the analysis of particles on leaf surfaces. A more detailed study is in progress. Leaves from twenty-eight sampling sites around the Phoenix area have been collected and will be analyzed with a method similar to that used in the preliminary study. The twenty-eight sites were chosen based on land-use data. In addition to determi
Atmospheric deposition sampling across an urban gradient, using passive resin collectors
One of the "Grand Challenges" for environmental biology is to increase understanding of human perturbations of biogeochemical cycles (NRC 2001). One route for these perturbations to be affected is through the transfer of pollutants from the atmosphere to the biosphere. As part of the Ecosystem Response to Material Deposition from the Urban Atmosphere (N. B. Grimm, PD) study, CAP-LTER scientists are investigating the fate of anthropogenic organic C (oC) and inorganic nitrogen (iN) deposition and their effects on ecosystem functioning in unmanaged deserts within and near cities. We hypothesize that biogeochemical cycling will be qualitatively different in urban environments due to large inputs of biologically available C and N from the atmosphere. As part of this project, we will deploy filter banks equipped with size-selective aerosol inlets to collect particulate oC and iN compounds in the urban atmosphere. In order to estimate fluxes of these nutrients from the concentration measurements, we plan to deploy weather stations and to analyze these data to estimate deposition rates.
ABoVE: Atmospheric Gas Concentrations from Airborne Flasks, Arctic-CAP, 2017
This dataset provides atmospheric carbon dioxide (CO2), methane (CH4), carbon monoxide (CO), molecular hydrogen (H2), nitrous oxide (N2O), sulfur hexafluoride (SF6), and other trace gas mole fractions (i.e. "concentrations") from flights over Alaska and the Yukon and Northwest Territories of Canada during the Arctic Carbon Aircraft Profile (Arctic-CAP) monthly sampling campaigns from April-November 2017. The data were derived from laboratory measurements of whole air samples collected by Programmable Flask Packages (PFP) onboard the aircraft. During each of the six monthly campaigns, flights over the Arctic-Boreal Vulnerability Experiment (ABoVE) domain included 25 vertical profiles, from the surface up to 6 km altitude, at locations selected to complement regular long-term vertical profiles, remote sensing data, and ground-based flux tower measurements. Measurements were initiated by the aircraft pilot at predetermined locations within each profile in order to evenly distribute flask sampling points throughout each flight. A total of 408 flask samples were collected during 55 individual flights. The measurements included in this data set are crucial for understanding changes in Arctic carbon cycling and the potential threats posed by thawing of Arctic permafrost.
Nimbus-6 Level 3 NMC Data Systems Test for the Global Atmospheric Research Program (GARP) V001 (NMCN6L3GARP) at GES DISC
The NMCN6L3GARP is the Nimbus-6 Level 3 NMC Data Systems Test for the Global Atmospheric Research Program (GARP) product. The product consists of meterological parameters, such as relative humidity, temperature, wind speed, etc. an a regular lat/lon grid reported every 12 hours. Data Systems Tests (DST) 5 and 6 were conducted to assess the NMC's numerical analysis and forecasting, and to determine the impact of meteorological satellite data from Nimbus-6 HRIR and SCAMS. DST-5 ran for the period of 30 August to 4 September 1975, and DST-6 was conducted from 29 February to 3 March 1976. The data were recovered from the original magnetic tapes, and are now stored online as orbit files in their original proprietary binary format with a days worth of data.These data were previously archived at NASA NSSDC under the entry ID ESAD-00094 (old id 775-052A-02B).
TROPICS03 L2B Atmospheric Vertical Temperature and Moisture Profiles (AVTP, AVMP) V1.0
The "Time-Resolved Observations of Precipitation structure and storm Intensity with a Constellation of Smallsats" (TROPICS) mission has a goal of providing nearly all-weather observations of three-dimensional temperature and humidity, as well as cloud ice and precipitation horizontal structure, at high temporal resolution to conduct high-value science investigations of tropical cyclones. The mission comprises a constellation of five identical Space Vehicles (SVs) conforming to the 3U form factor and hosting a passive microwave spectrometer payload. Each SV hosts an identical high-performance spectrometer named the TROPICS Millimeter-wave Sounder (TMS) that will provide temperature profiles using seven channels near the 118.75-GHz oxygen absorption line, water vapor profiles using three channels near the 183-GHz water vapor absorption line, imagery in a single channel near 90 GHz for precipitation measurements (when combined with higher resolution water vapor channels), and a single channel near 205 GHz that is more sensitive to cloud-sized ice particles.This dataset is from the TROPICS03 satellite, as the Validated Stage-1 release of the Level 2B geophysical retrieval of atmospheric vertical temperature (kelvins) at the larger unified F-band resolution, retrieval of vertical moisture (g/kg) at the finer G-band spatial resolution, and total Precipitable Water (mm) at the finer G-band spatial resolution. Each TROPICS netCDF file contains a granule of data with 81 spots and approximately 2880 scans, where a granule is defined as an orbit's worth of data.
Sounder SIPS: Suomi NPP CrIMSS Level 2 CLIMCAPS Full Spectral Resolution: Atmosphere cloud and surface geophysical state V2 (SNDRSNIML2CCPRET) at GES DISC
WARNING: To users of the derived product “co_mmr_midtrop” (carbon monoxide mass mixing ratio to dry air [kg/kg] at ~500 hPa). This variable has a significant bias due to a conversion error: the molecular weight of carbon dioxide (CO2, 44.01 g/mol) was used instead of carbon monoxide (CO, 28.01 g/mol). To correct, simply multiply “co_mmr_midtrop” by 28.01/44.01. Alternatively, derive a profile of mass mixing ratio from scratch using the retrieved column density values (“mol_lay/co_mol_lay”) in the Level 2 files. For further questions or concerns please contact the Sounder SIPS at: sounder.sips@jpl.nasa.govThe CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Full Spectral Resolution (FSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2000-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz.The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.A level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
Sounder SIPS: Suomi NPP CrIMSS Level 2 CLIMCAPS Full Spectral Resolution: retrieved atmospheric state V2.1 (SNDRSNIML2CPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). The CrIS/ATMS instruments used for this product are on board the Suomi National Polar-orbiting Partnership (SNPP) platform and use the Full Spectral Resolution (FSR) data. The CrIS instrument is a Fourier transform spectrometer with a total of 2211 FSR infrared sounding channels covering the longwave (645-1095 cm-1), midwave (1210-1750 cm-1), and shortwave (2000-2550 cm-1) spectral regions. The ATMS instrument is a cross-track scanner with 22 channels in spectral bands from 23 GHz through 183 GHz.The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphere profiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.A level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Three-Hourly Terra-NPP Edition1A
CER_SYN1deg-3Hour_Terra-NPP_Edition1A is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top-of-Atmosphere (TOA), Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Three-Hourly Terra-Suomi National Polar-orbiting Partnership (NPP) Edition1A data product. Data was collected using several instruments on multiple platforms including CERES Imaging Radiometers on Geostationary Satellites; CERES Flight Model 1 (FM1), FM2, CERES Scanner, and Moderate-Resolution Imaging Spectroradiometer (MODIS) on Terra; and FM5, CERES Scanner, and Visible-Infrared Imager-Radiometer Suite (VIIRS) on NPP. Data collection for this product is complete.The CERES Synoptic (SYN) 1 degree (SYN1deg)products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, surface fluxes, and computed fluxes adjusted or constrained to the CERES-observed TOA fluxes. The calculated fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS, geostationary satellite cloud properties, and atmospheric profiles provided by the Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product offers parameters on a three-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.CERES SYN1deg products use 1-hourly radiances and cloud property data from GEO imagers to model variability between CERES observations accurately. Several steps are involved in using GEO data to enhance diurnal sampling. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. A normalization technique ensures GEO and CERES TOA fluxes are consistent. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a key Earth Observing System (EOS) program component. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions follow the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, the protoflight model (PFM), was launched on November 27, 1997, as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi NPP satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
Lidar Atmospheric Sensing Experiment (LASE) Data Obtained During the SAGE III Ozone Loss and Validation Experiment (SOLVE)
LASE_SOLVE is the Lidar Atmospheric Sensing Experiment (LASE) Data Obtained During the SAGE III Ozone Loss and Validation Experiment (SOLVE) data product. Data collection for this data set is complete.The LASE SOLVE field experiment was conducted in the Arctic during November 1999 to March 2000 with the scientists based above the Arctic Circle at the airport in Kiruna, Sweden. Measurements of stratospheric composition over the Arctic were made using a large suite of instruments aboard several European aircraft, as well as on NASA's DC-8 and ER-2 aircraft. Additionally, balloons and ground-based instruments also took atmospheric readings and scientists gathered ozone-related data to use in validating measurements by the SAGE III instrument aboard the Russian Meteor-3 satellite. LASE airborne lidar produced measurements of aerosols and water vapor vertical profiles from the aircraft altitude (6-8 km) down to the surface. SOLVE was a measurement campaign designed to examine the processes which control polar to mid-latitude stratospheric ozone levels. The goal of SOLVE was for its results to expand the understanding polar ozone processes to provide greater confidence in ozone monitoring capabilities.
LBA-ECO CD-36 South American Land Data Assimilation System Atmospheric Forcing Data
This data set provides South American Land Data Assimilation System (SALDAS) forcing data including atmospheric fields necessary for land surface modeling for South America which are derived by combining modeled and observation based sources. The forcing data cover the entire continent of South America at 0.125 degree resolution and are built around the model-calculated values of air temperature, wind speed and specific humidity at two meters, surface pressure, downward shortwave and longwave surface radiation, and precipitation from the South American Regional Reanalysis (SARR). These SARR data (Aravequia et al. 2007), which were released in 2006 by INPE/CPTEC, are a medium-term, dynamically consistent, high-resolution (0.125 degree), high-frequency, atmospheric dataset covering South America. The forcing data are available at a 3-hourly time step for a 5-year period from 2000 to 2004. There are 60 monthly *.zip files with each zipped file containing ~240 3-hourly time step data files for that particular month in NetCDF format. Each zipped file is approximately one GB in size.
Airborne Multi-angle Imaging SpectroRadiometer (AirMISR) Data from the Southern African Fire Atmosphere Research Initiative 2000 Field Campaign
The AIRMISR_SAFARI data were acquired on September 6, 7, 13 and 14, 2000 during the SAFARI 2000 campaign. The Southern African Fire Atmosphere Research Initiative (SAFARI) 2000 field campaign focused on the smoke and gases released into the environment of southern Africa by industrial, biological and man-made sources such as biomass burning. The area of study included Botswana, Lesotho, Malawi, Mozambique, Namibia, South Africa, Swaziland, Zambia, and Zimbabwe. The Airborne Multi-angle Imaging SpectroRadiometer (AirMISR) is an airborne instrument for obtaining multi-angle imagery similar to that of the satellite-borne Multi-angle Imaging SpectroRadiometer (MISR) instrument, which is designed to contribute to studies of the Earth's ecology and climate. AirMISR flies on the NASA ER-2 aircraft. The Jet Propulsion Laboratory in Pasadena, California built the instrument for NASA. Unlike the satellite-borne MISR instrument, which has nine cameras oriented at various angles, AirMISR uses a single camera in a pivoting gimbal mount. A data run by the ER-2 aircraft is divided into nine segments, each with the camera positioned to a MISR look angle. The gimbal rotates between successive segments, such that each segment acquires data over the same area on the ground as the previous segment. This process is repeated until all nine angles of the target area are collected. The swath width, which varies from 11 km in the nadir to 32 km at the most oblique angle, is governed by the camera's instantaneous field-of-view of 7 meters cross-track x 6 meters along-track in the nadir view and 21 meters x 55 meters at the most oblique angle. The along-track image length at each angle is dictated by the timing required to obtain overlap imagery at all angles, and varies from about 9 km in the nadir to 26 km at the most oblique angle. Thus, the nadir image dictates the area of overlap that is obtained from all nine angles. A complete flight run takes approximately 13 minutes. The 9 camera viewing angles are: 0 degrees or nadir 26.1 degrees, fore and aft 45.6 degrees, fore and aft 60.0 degrees, fore and aft 70.5 degrees, fore and aft. For each of the camera angles, images are obtained at 4 spectral bands. The spectral bands can be used to identify vegetation and aerosols, estimate surface reflectance and for ocean color studies. The center wavelengths of the 4 spectral bands are: 443 nanometers, blue 555 nanometers, green 670 nanometers, red 865 nanometers, near-infrared. Two types of AirMISR data products are available - the Level 1 Radiometric product (L1B1) and the Level 1 Georectified radiance product (L1B2).
CARVE: L2 Atmospheric CO2, CO, and CH4 Concentrations, CARVE Tower, Alaska, 2011-2015
This data set provides atmospheric methane (CH4), carbon dioxide (CO2), and carbon monoxide (CO) dry air mole fractions and water vapor mole fractions (H2O) from continuous in situ measurements at the CARVE flux tower in Fox, Alaska between October 2011 and May 2015 for the Carbon in Arctic Reservoirs Vulnerability Experiment (CARVE). Air was drawn from three different heights above the base of the tower (31.7 m, 17.1 m, and 4.9 m) and analyzed using a Picarro cavity ring-down spectrometer (CRDS). Measurements of ambient and sonic temperature, vertical and horizontal velocity, and atmospheric pressure are also included in the data set.
CERES and GEO-Enhanced TOA, Within-Atmosphere and Surface Fluxes, Clouds and Aerosols Monthly Terra-Aqua-NOAA20 Edition4B
CER_SYN1deg-Month_Terra-Aqua-NOAA20_Edition4B is the Clouds and the Earth's Radiant Energy System (CERES) and geostationary (GEO)-Enhanced Top of Atmosphere (TOA), Within-Atmosphere, and Surface Fluxes, Clouds and Aerosols Monthly Terra-Aqua-NOAA20 Edition4A data product. Data was collected using the following instruments and platforms: Imaging Radiometers on Geostationary Satellites platform, CERES Flight Model 1 (FM1), CERES FM2, CERES Scanner, and MODIS on Terra; CERES FM3, CERES FM4, CERES Scanner, and MODIS on Aqua; and CERES FM6 and VIIRS on NOAA-20. Not all platforms are available for any particular data month. Data collection for this product is ongoing.CERES Synoptic (SYN) 1 degree products provide CERES-observed temporally interpolated TOA radiative fluxes and coincident MODIS-derived cloud and aerosol properties and include geostationary-derived cloud properties and broadband fluxes that have been carefully normalized with CERES fluxes in order to maintain the CERES calibration. They also contain computed initial TOA, in-atmosphere, and surface fluxes and computed fluxes that have been adjusted or constrained to the CERES-observed TOA fluxes. The computed fluxes are produced using the Langley Fu-Liou radiative transfer model. Computations use MODIS , VIIRS, and geostationary satellite cloud properties along with atmospheric profiles provided by the NASA Global Modeling and Assimilation Office (GMAO). The adjustments to clouds and atmospheric properties are also provided. The computations are made for all-sky, clear-sky, pristine (clear-sky without aerosols), and all-sky without aerosol conditions. This product provides parameters on a three-hourly temporal resolution and 1°-regional spatial scales. Fluxes are provided for clear-sky and all-sky conditions in the longwave (LW), shortwave (SW), and window (WN) regions.CERES SYN1deg products use 1-hourly radiances and cloud property data from geostationary (GEO) imagers to more accurately model variability between CERES observations. To use GEO data to enhance diurnal sampling, several steps are involved. First, GEO radiances are cross-calibrated with the MODIS imager using only data that is coincident in time and ray-matched in angle. Next, the GEO cloud retrievals are inferred from the calibrated GEO radiances. The GEO radiances are converted from narrowband to broadband using empirical regressions and then to broadband GEO TOA fluxes using Angular Distribution Models (ADMs) and directional models. To ensure GEO and CERES TOA fluxes are consistent, a normalization technique is used. Instantaneous matched gridded fluxes from CERES and GEO are regressed against one another over a month from 5°x5 ° latitude-longitude regions. The regression relation is then applied to all GEO fluxes to remove biases that depend upon cloud amount, solar and view zenith angles, and regional dependencies. The regional means are determined for 1° equal-angle grid boxes calculated by first interpolating each parameter for any missing times of the CERES/GEO observations to produce a complete 1-hourly time series for the month. Monthly means are calculated using the combination of observed and interpolated parameters from all days containing at least one CERES observation.CERES is a key component of the Earth Observing System (EOS) program. The CERES instruments provide radiometric measurements of the Earth's atmosphere from three broadband channels. The CERES missions are a follow-on to the successful Earth Radiation Budget Experiment (ERBE) mission. The first CERES instrument, protoflight model (PFM), was launched on November 27, 1997 as part of the Tropical Rainfall Measuring Mission (TRMM). Two CERES instruments (FM1 and FM2) were launched into polar orbit on board the Earth Observing System (EOS) flagship Terra on December 18, 1999. Two additional CERES instruments (FM3 and FM4) were launched on board Earth Observing System (EOS) Aqua on May 4, 2002. The CERES FM5 instrument was launched on board the Suomi National Polar-orbiting Partnership (NPP) satellite on October 28, 2011. The newest CERES instrument (FM6) was launched on board the Joint Polar-Orbiting Satellite System 1 (JPSS-1) satellite, now called NOAA-20, on November 18, 2017.
DSCOVR EPIC L2 Multi-Angle Implementation of Atmospheric Correction (MAIAC) Version 02
DSCOVR_EPIC_L2_MAIAC_02 is the DSCOVR EPIC L2 Multi-Angle Implementation of Atmospheric Correction (MAIAC) Version 02 data product. Data collection for this product is ongoing. Level 2 Multi-Angle Implementation of Atmospheric Correction (MAIAC) provides an interdisciplinary suite of products for the Deep Space Climate Observatory (DSCOVR) Earth Polychromatic Imaging Camera (EPIC). The current version 2 reports the following products: a) Atmosphere: cloud mask, global aerosol optical depth at 443nm and 551nm, fine mode fraction (over ocean) and spectral aerosol absorption for detected biomass burning or mineral dust aerosols. The absorption information includes single scattering albedo at 443nm, imaginary refractive index at 680nm, and Absorption Angstrom Exponent (AAE) characterizing spectral increase of imaginary refractive index at Vis-UV wavelengths. The absorption information is provided for two effective aerosol layer heights of 1km and 4km generally representing boundary layer and transport mode. b) Land: atmospherically corrected spectral bidirectional reflectance factors (BRF) along with Lambertian surface reflectance, and bidirectional reflectance distribution function (BRDF) for the backscattering view geometries of EPIC. The BRDF is represented by 3 parameters of the Ross-Thick Li-Sparse model. c) Ocean: Water leaving reflectance (non-dimensional) at Ultraviolet-Visible (UV-Vis) bands.The parameters are distributed at 10 km rotated sinusoidal grid and 1 to 2-hour temporal frequency. MAIAC version 02 also provides gap-filled global composite products for Normalized Difference Vegetation Index (NDVI) over land, and water leaving reflectance in 5 UV-Vis bands over global ocean. The composite products represent a weighted running average where the weight of the latest observation is maximized towards the local noon and low aerosol conditions.
Advanced Vertical Atmospheric Profiling System Dropsondes (AVAPS) IMPACTS
The Advanced Vertical Atmospheric Profiling System (AVAPS) IMPACTS dataset consists of vertical atmospheric profile measurements collected by the Advanced Vertical Atmospheric Profiling System (AVAPS) dropsondes released from the NASA P-3 aircraft during the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) field campaign. IMPACTS was a three-year sequence of winter season deployments conducted to study snowstorms over the U.S Atlantic Coast (2020-2023). The campaign aimed to (1) Provide observations critical to understanding the mechanisms of snowband formation, organization, and evolution; (2) Examine how the microphysical characteristics and likely growth mechanisms of snow particles vary across snowbands; and (3) Improve snowfall remote sensing interpretation and modeling to significantly advance prediction capabilities. AVAPS uses a Global Positioning System (GPS) dropsonde to measure atmospheric state parameters (temperature, humidity, wind speed/direction, pressure) and location in 3-dimensional space during the dropsonde’s descent. The AVAPS dataset files are available from January 12, 2020, through February 28, 2023, in ASCII-ict format.
Sounder SIPS: AQUA AIRS IR-only Level 2 CLIMCAPS: retrieved atmospheric state V2.1 (SNDRAQIL2CPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the AIRS (Atmospheric Infrared Sounder). The AIRS instrument is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. The AIRS CLIMCAPS Retrieval Product consists of retrieved estimates of cloud and surface properties, plus profiles of retrieved temperature, water vapor, ozone, carbon monoxide and methane. The temperature profile vertical resolution is 100 levels total between 1100 mb and 0.1 mb, while moisture profile is reported at atmospheric layers between 1100 mb and 300 mb. The horizontal resolution is 50 km.The CLIMCAPS algorithm uses an Optimal Estimation methodology and uses an a-priori first guess to start the process. A CLIMCAPS sounding is comprised of a set of parameters that characterizes the full atmospheric state and includes a variety of geophysical parameters derived from the CrIMSS data. These include surface temperature and infrared emissivity; full atmosphereprofiles of temperature, water vapor and ozone; infrared effective cloud top characteristics; carbon monoxide, methane, carbon dioxide, sulfur dioxide, nitrous oxide, and nitric acid.An AIRS level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
Sounder SIPS: Suomi NPP CrIMSS Level 2 CLIMCAPS Full Spectral Resolution: Atmospheric state at Standard Pressure Levels derived from CLIMCAPS V2.1 (SNDRSNIML2PLEVCPS) at GES DISC
The CLIMCAPS (Community Long-term Infrared Microwave Coupled Product System) algorithm is used to analyze data from the Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS) instruments, also known as CrIMSS (Cross-track Infrared and Microwave Sounding Suite). This file contains the fixed Pressure Level product (PLEV) variables derived from the CLIMCAPS algorithm using full spectral resolution inputs. They include including gas mixing ratio profiles, column totals, surface values, tropopause properties, and relative humidity, together with per-field quality flagging. The profiles are specified at the surface and layer boundaries and are estimated from layer amounts using the L2 algorithmAn level 2 granule has been set as 6 minutes of data, 30 footprints cross track by 45 lines along track. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day. The CLIMCAPS algorithm uses data from the second Modern-Era Retrospective analysis for Research and Applications (MERRA-2) as a first-guess for the atmospheric state. Because MERRA-2 products typically have a latency from 3 to 7 weeks, so too do the CLIMCAPS products.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.