Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
4,276
datasets available to search
ShareScore release 0.9.0
Dataset results
4,276 results for “Estimation”
Microdata on vector abundance and IRS quality assurance (Estimating the impact of indoor residual spraying on sandfly abundance and incidence of visceral leishmaniasis in India from 2016 to 2022: an interrupted time-series analysis and modelling study)
<p>This repository contains the microdata on vector abundance and quality assurance of indoor residual spraying (IRS) that was used to estimate the impact of IRS on sandfly abundance and incidence of visceral leishmaniasis (VL) in India, as described in the paper "Estimating the impact of indoor residual spraying on sandfly abundance and incidence of visceral leishmaniasis in India from 2016 to 2022: an interrupted time-series analysis and modelling study" by Coffeng et al (<a href="https://doi.org/10.1016/S1473-3099(24)00420-1">https://doi.org/10.1016/S1473-3099(24)00420-1</a>). These data were collected as part of a BMGF-funded project led by dr. Michael Coleman at the Liverpool School for Tropical Medicine, as described in an earlier paper by Deb et al (<a href="https://doi.org/10.1371/journal.pntd.0009101">https://doi.org/10.1371/journal.pntd.0009101</a>).</p> <p>This repository does not include microdata on VL cases as these are owned by India's National Center for Vector Borne Disease Control (NCVBDC, <a href="https://ncvbdc.mohfw.gov.in/" target="_blank" rel="nofollow noreferrer noopener">https://ncvbdc.mohfw.gov.in/</a>).</p>
A Global Gridded Municipal Water Withdrawal Estimation Method Using Aggregated Data and Artificial Neural Network
<p>Global gridded municipal water withdrawal estimations for the following WST paper.</p> <p>Jiabao Yan, Shaofeng Jia; A global gridded municipal water withdrawal estimation method using aggregated data and artificial neural network. <em>Water Science Technology</em>, 2023; 87 (1): 251–274. <a href="https://doi.org/10.2166/wst.2022.399" target="_blank" rel="noopener">https://doi.org/10.2166/wst.2022.399</a></p> <p>The representative year of the data is 2015, and the unit of the data is in millimeters (mm).</p>
Force/Torque Sensor Measurements for Estimating the Mass Center of an Unknown Robot End Effector
<h1>Introduction</h1> <p>This dataset was created as part of a study on a novel geometric method to estimate the mass center of an unknown robot end effector. A conference paper from this study was accepted for the 2024 IEEE International Conference on Real-time Computing and Robotics (RCAR 2024) [1]. </p> <p>A force/torque sensor (FTS) was attached to the flange of a serial robot, and an unknown end effector was attached to the FTS. Vougioukas [2] described a method to calculate the FTS bias, as well as the mass and mass center using Least Squares Estimation (LSE). His method requires FTS samples from 24 specific orientations of the sensor. See his paper for a description of this calibration method. This dataset was used to evaluate and compare the estimates from the proposed geometric technique to the estimates from Vougioukas' method. </p> <p>The hardware used to generate this dataset were:</p> <ul> <li>KUKA Agilus KR6 R900 sixx (KUKA AG, Germany)</li> <li>ATI Gamma FTS (ATI Industrial Automation, Inc., USA)</li> <li>ATI Netbox (ATI Industrial Automation, Inc., USA)</li> </ul> <h1>Dataset</h1> <p>The robot was used to move the FTS with high precision and accuracy as required by the calibration method from Vougioukas. Each line in the dataset is the measured force and torque, the direction of gravity in the FTS frame, and the orientation of the FTS expressed in the world frame. The lines are ordered and correspond to the orientations described by Vougioukas in his paper. </p> <p><strong>fx,</strong> <strong>fy, fz</strong> - The force components as measured by the FTS.<br><strong>tx, ty, tz </strong>- The torque components as measured by the FTS.<br><strong>gx,gy,gz </strong>- The direction of the gravitational vector in the FTS frame.<br><strong>r11, r12, r13, r21, r22, r23, r31, r32, r33 </strong>- The components of the rotation matrix that represents the FTS orientation in the world frame.</p> <h1>References</h1> <p>[1] A. Skrede, "A Geometric Perspective on Moment Arm Estimation Using Force/Torque Sensors", Accepted for the 2024 IEEE International Conference on Real-time Computing and Robotics (RCAR), Ålesund, Norway, June 2024 </p> <p>[2] S. Vougioukas, “Bias Estimation and Gravity Compen- sation For Force-Torque Sensors,” in Recent Advances in Simulation, Computational Methods and Soft Computing. WSEAS Press, 2001, pp. 82–85. </p>
Data from: Estimates of late Early Cretaceous atmospheric CO2 from Mongolia based on stomatal and isotopic analysis of Pseudotorellia
<p>Our dataset includes 115 leaf cuticles related to two species of <em>Pseudotorellia</em> Florin from three stratigraphically similar samples at the Tevshiin Govi lignite mine in central Mongolia (~119.7–100.5 Ma, Aptian–Albian, Cretaceous). We apply a well-vetted paleo-CO<sub>2</sub> proxy based on leaf gas-exchange principles (the Franks model) to those leaves for paleo-CO<sub>2</sub> reconstruction, which requires leaf stomata and carbon isotope analysis. All cuticle measurements are summarized in this dataset. </p>
Diatom cell-size composition as a novel tool for quantitative estimates of water table in peatlands
<p>Diatom cell-size composition is an indicator of aquatic environmental changes, but has been rarely investigated, especially in semi-terrestrial peatlands. In this study, both taxonomic composition and cell-size composition of diatoms were analyzed in 41 samples from two montane peatlands, northeastern China. Redundancy analyses revealed that diatom taxonomic composition was significantly related to the depth to the water table (DWT) and Ca<sup>2+</sup>, while cell-size composition was significantly associated with DWT and Si. DWT was the most important factor and its sole effect explained 26.2% and 17.9% of the total variance in taxonomic composition and cell-size composition, respectively. Accordingly, diatom-based water-table transfer functions were developed based on taxonomic composition and cell-size composition, respectively. The maximum likelihood (ML) model based on diatom taxonomic composition had the best performance, with the correlation coefficient value (R2) of 0.78 and the root mean squared error of prediction (RMSEP) of 6.66 cm. The ML model based on cell-size composition had similar performance, with the R2 of 0.78 and the RMSEP of 6.87cm, suggesting that diatom cell-size composition can be a new quantitative means to track past water-table changes.</p>
Harvest estimates of Chinook and other salmon taken in the non-spawning tributaries of the Johnson, Kialik, Gweek, and Paillek Slough, 2021.
<p>This dataset contains reported and estimated harvests of Chinook salmon taken in 2021 from tributaries of the Kuskokwim River designated as 'Non-spawning'. Information include estimates of households, estimates of salmon harvest, residence of harvest, location of harvest above or below the 100-yard marker indicating the end of legal Kuskokwim river main stem waters.</p>
Data for climate-resilient snowpack estimation in the Western United States
<p>Generated and preprocessed files for the resilient snowpack estimation project. All preprocessed data were originally produced by the WUS-D3 project (https://dept.atmos.ucla.edu/alexhall/downscaling-cmip6) or PRISM (https://www.prism.oregonstate.edu/).</p>
Wildland fire PM2.5 modeled estimates for the US from 2008-2018
<p>This dataset includes daily modeled wildland fire PM<sub>2.5 </sub>concentrations for 2008-2018 for the state of California at a 12-km grid spatial resolution, estimated using the U.S. EPA's Community Multiscale Air Quality (CMAQ) (v. 5.0.1- 5.3) modeling system. These wildland fire emissions estimates (which include wildfires and prescribed burns [but exclude agricultural burns]) incorporate multiple sources of fire activity. SMARTFIRE2 was used to reconcile the sources of fire activity data. Fuel consumption was calculated using the U.S. Forest Service's CONSUME ver. 3.0 fuel consumption model and the Fuel Characteristic Classification System (FCCS) fuel-loading database in the BlueSky Framework. Emission factors were taken from the Fire Emission Production Simulator (FEPS) model. Non-fire emissions sources are from the National Emissions Inventory (NEI). The model was run with all emissions (fire and non-fire sources) and again without fires. The calculated difference between these simulations ('all sources PM<sub>2.5</sub>'<sub> </sub>and 'non-fire PM<sub>2.5</sub>') isolates the fire contribution, or 'fire-only PM<sub>2.5</sub>', which is the dataset provided here. </p>
Data from: Uncorrected soil water isotopes through cryogenic vacuum distillation may lead to a false estimation of plant water sources
<p><span>Successful use of stable isotopes (δ<sup>2</sup>H and δ<sup>18</sup>O) in ecohydrological studies relies on the accurate extraction of unfractionated water from different types of soil samples. Cryogenic vacuum distillation (CVD) is a common laboratory-based technique used for soil water extraction; however, the reliability of this technique in reflecting soil water δ<sup>2</sup>H and δ<sup>18</sup>O is still of concern. </span><span>This study examines the </span><span>reliability of a newly developed automatic cryogenic vacuum distillation (ACVD) system through a set of pure water extraction. The impacts of extraction parameters (i.e., extraction time, temperature, and vacuum) and soil properties on the recovery of soil water δ<sup>2</sup>H and δ<sup>18</sup>O were further assessed for the ACVD and traditional extraction systems (TCVD) systems. Finally, the potential influences of the CVD technique on the prediction of plant water uptake were investigated through a sensitivity analysis. </span><span>We demonstrated that the ACVD system was reliable for recovering the isotopic composition of pure water, with negligible biases of − 0.1 ± 0.3‰ for δ<sup>2</sup>H and 0.04 ± 0.09‰ for δ<sup>18</sup>O. Both ACVD and TCVD similarly extracted water from the rewetted soils when the extraction time of the ACVD system reached 240 min, but none of the CVD systems successfully recovered the isotopic signatures of doped water from soil materials. </span><span>Mean </span><span>δ</span><sup><span>2</span></sup><span>H </span><span>offsets</span><span> of extracted soil water were − 2.6 ± 1.3‰ and − 2.4 ± 1.7‰ for ACVD and TCVD, respectively; while mean δ<sup>18</sup>O </span><span>offsets</span><span> were − 0.16 ± 0.14‰ and − 0.39 ± 0.37‰. The isotopic offsets of CVD systems were positively correlated with soil clay content, and negatively correlated with soil water content. The use of corrected soil data (with CVD offsets) could improve the prediction of plant water uptake based on its high correlation with environmental factors. </span><span>This study identifies the isotopic offsets of CVD systems (i.e., ACVD and TCVD) and provides possible solutions for better-predicting plant water sources. Even so, the wide use of CVD techniques probably induces noticeable uncertainties in predicting plant water uptake depths. The </span><span>dataset of soil water extraction </span><span>in this study</span><span> will have implications for the technological development of CVD techniques.</span></p>
ASDF: Assembly State Detection Utilizing Late Fusion by Integrating 6D Pose Estimation - Training Set - Corner Clamp Part 1
<p>@article{schieber2024asdf,<br> title={ASDF: Assembly State Detection Utilizing Late Fusion by Integrating 6D Pose Estimation},<br> author={Schieber, Hannah and Li, Shiyu and Corell, Niklas and Beckerle, Philipp and Kreimeier, Julian and Roth, Daniel},<br> journal={arXiv preprint arXiv:2403.16400},<br> year={2024}<br>}</p>
Replication package of "Higher Fault Detection Through Novel Density Estimators in Unit Test Generation"
<p>Replication package for the paper "Higher Fault Detection Through Novel Density Estimators in Unit Test Generation" accepted at the Symposium on Search-based Software Engineering (SSBSE) 2024.</p> <p> </p> <p> </p>
Data for manuscript "Estimating grain stress and distinguishing between mobility and transportability improves bedload transport estimates in coarse-bedded mountain rivers"
<p>This repository contains data collected that was used in the manuscript:</p> <p><span>Estimating grain stress and distinguishing between mobility and transportability improves bedload transport estimates in coarse-bedded mountain rivers</span></p> <p> </p>
Uncertainty sensitivity estimates for EXIOBASE 3.8.2 footprints
<p>This data set provides uncertainty sensitivity estimates for EXIOBASE 3.8.2 footprints. Sensitivity levels of footprints of all EXIOBASE regions/extensions were calculated using Linear Error propagation (assuming a 0.1 relative standard deviation) such as that each of the 49 EXIOBASE regions has 124 footprint sensitivity estimates and a total of 6076 sensitivity estimates. This dataset was calculated as part of the paper "<em>Uncertainty propagation in EE-MRIO footprint estimates</em>" Badr & Stadler (2024).</p> <p>We reccoment interpreting footprint sensititivity levels as: 0-0.02: low sensitivity, 0.02-0.03: medium sensitivity, 0.03-0.04: Highly sensitive, 0.04 or more: Extremely sensitive. </p> <p>The paper repository can be found on: gitlab.com/hitea/variance-in-uncertainties-in-mrios</p>
The role of OCO-3 XCO2 retrievals in estimating global terrestrial net ecosystem exchanges
<p>1.<strong>Exp_OCO3.zip </strong> includes regional posterior carbon fluxes from the assimilation using OCO-3 observations.</p> <p>2.<strong>Exp_OCO2.zip </strong> includes regional posterior carbon fluxes from the assimilation using OCO-2 observations.</p> <p>3.<strong>Exp_OCO3&2.zip </strong> includes regional posterior carbon fluxes from the joint assimilation using OCO-3 and OCO-2 observations together.</p> <p>4.<strong>posterior.fluxes.Exp_OCO3.nc </strong>includes information on the spatial distribution of annual as well as monthly posterior carbon fluxes from the assimilation using OCO-3 observations during August 2019 to December 2022.</p> <p>5.<strong>posterior.fluxes.Exp_OCO2.nc </strong>includes information on the spatial distribution of annual as well as monthly posterior carbon fluxes from the assimilation using OCO-2 observations during August 2019 to December 2022.</p> <p>6.<strong>posterior.fluxes.Exp_OCO3&2.nc </strong>includes information on the spatial distribution of annual as well as monthly posterior carbon fluxes from the joint assimilation using OCO-3 and OCO-2 observations together during August 2019 to December 2022.</p> <p>7.<strong>evaluation_result.txt</strong> includes the results of the evaluation of posterior carbon fluxes using independent CO2 observations from 66 surface flask sites.</p> <p> </p> <p> </p> <p> </p>
Additional raw video and pose estimation data of top view open field mouse behavior recordings after diazepam injections
<p>This repository contains raw data for 32 different open field recordings of mice. These include top view raw video .mp4 files (Videos.zip and Videos_2.zip) and the corresponding .csv pose estimation data (data.zip) obtained with DeepLabCut. The data is from a single diazepam injection experiment at Roche, where animals were injected with saline, 1 mg/kg, 2 mg/kg or 3 mg/kg of diazepam. The METADATA_ROCHE.csv or METADATA_ROCHE.xlsx files contain all grouping variables and help linking the pose estimation files (located in data/) to the video files. Visit https://github.com/ETHZ-INS/BehaviorFlow to find out more about how we have used this data.</p>
Additional raw video and pose estimation data of top view mouse behavior recordings (marble burying test, light-dark box, fear conditioning box) of acute and chronic stress models
<p>This repository contains raw data for 296 different behavioral recordings of mice (marble burying test, light-dark box, fear conditioning box). These include top view raw video .mp4 files (Videos.zip) and the corresponding .csv pose estimation data (data.zip) obtained with DeepLabCut. The data is from multiple different experiments. The METADATA.csv or METADATA.xlsx files contain all grouping variables and help linking the pose estimation files (located in multiple subfolders of /data) to the video files. Visit https://github.com/ETHZ-INS/BehaviorFlow to find out more about how this data has be used by us.</p>
Replication of manuscript entitled "Multi-decadal climate variability and satellite biases have amplified model-observation discrepancies in tropical troposphere warming estimates"
<p>Replication of manuscript entitled "Multi-decadal climate variability and satellite biases have amplified model-observation discrepancies in tropical troposphere warming estimates".</p> <p>This page contains datasets used to replicate figures in a manuscript entitled "Multi-decadal climate variability and satellite biases have amplified model-observation discrepancies in tropical troposphere warming estimates". These ascii or netcdf files can be easily read by NCL, Fortran and others.</p> <p> </p>
Integrating pigment and fatty acid profiles for enhanced estimation of seston community composition
<p>Climate change, nutrition pollution, and land use alterations influence the primary production of lakes. While light-microscopy counting remains the standard for estimating phytoplankton community composition, its expense and time-consuming nature necessitate cost-effective alternatives for seston analysis. Furthermore, estimating the contribution of seston constituents other than primary producers, or non-algal particles, is not possible with light-microscopy counting. Biotracer approach using computational methods and chemotaxonomic biomarkers such as carotenoid pigments and fatty acids have been utilised as an alternative in seston analysis when species-level taxonomy is not required. However, a comprehensive testing of how well carotenoid and fatty acids can be utilised in estimating a wide range of seston phytoplankton communities using different estimation methods is lacking. To assess the accuracy of a suite of state-of-the-art biotracer-based computational methods, namely CHEMTAX, FASTAR (Fatty Acid Source-Tracking Algorithm in R), MixSIAR, and QFASA (Quantitative Fatty Acid Signature Analysis), lake water samples were collected in 2016, 2018, 2019, 2020, and 2021 for seston composition analysis in a boreal eutrophic lake with light-microscopy counting serving as the reference for seston composition. Absolute errors between the biotracer-based estimates were calculated to evaluate method performance. A small laboratory experiment to assess the reliability of estimating the contribution of non-algal particles using the computational methods with fatty acids was also conducted. The closest alignment to light-microscopy counting in terms of absolute error was achieved when both carotenoids and fatty acids were utilised together in the QFASA method. For CHEMTAX, FASTAR, and MixSIAR utilising carotenoids alone produced the closest results. Additionally, the estimation methods accurately assessed the proportion of non-algal particles in the seston when utilising fatty acid profiles, a capability not possible with light-microscopy counting. Our findings demonstrate that the biotracer approach provides a viable and cost-effective alternative to light-microscopy counting when group-level information of phytoplankton community composition suffices. Furthermore, we show that non-algal particles can be effectively estimated together with phytoplankton when utilising fatty acids.</p>
BeBOD estimates of attributable mortality and years of life lost due to tobacco use, 2013-2020
<h1>Belgian National Burden of Disease Study</h1> <h2>Estimates of the attributable burden of disease<strong><br></strong></h2> <p>Our results build on the estimates of causes of death from the <a href="https://www.sciensano.be/en/projects/belgian-national-burden-disease-study" target="_blank" rel="noopener">Belgian National Burden of Disease Study</a> and apply comparative risk assessment to estimate the proportion of that burden due to risk factors.</p> <h3>Population attributable fraction</h3> <p>Based on the estimated level of exposure and the associated health risk, a <strong>population attributable fraction (PAF)</strong> is calculated. The PAF is the proportion of the disease burden that is caused by exposure to the risk factor.</p> <h3>Attributable burden</h3> <p>The burden of disease is quantified in <strong>deaths</strong> and in <strong>Years of Life Lost (YLL)</strong>. To derive the burden attributable to a risk factor, its PAF is multiplied with the total observed burden.</p> <h2>Risk factors</h2> <h3>Tobacco use</h3> <p>The prevalence of never, former and current smokers, as well as the daily number of cigarettes smoked by smokers, is derived from the Belgian Health Interview Survey. Bayesian regression models are used to smoothen, interpolate and extrapolate observed estimates.</p> <h2>More information</h2> <p>For additional background on BeBOD, please visit <a href="https://www.sciensano.be/en/projects/belgian-national-burden-disease-study">https://www.sciensano.be/en/projects/belgian-national-burden-disease-study</a>.</p> <p>Explore the estimates via <a href="https://burden.sciensano.be/shiny/risk">https://burden.sciensano.be/shiny/risk</a>.</p>
Assessing the potential of camera traps for estimating activity pattern compared to collar-mounted activity sensors: A case study on Eurasian lynx (Lynx lynx) in South-Eastern Norway
<div> <div> <div> <div> <p>The diel activity patterns of animals convey information about physiology, ecological niches and animal behaviour relevant for both applied conservation and more theoretical research. However, these patterns are challenging to study in the field. The current gold-standard approach to quantify the movements and activity patterns of medium to large wildlife species is to use Global Positioning Systems (GPS) collars equipped with activity sensors (e.g., accelerometers). A more recent approach consists of inferring activity patterns from the time-stamped pictures of wildlife obtained from the camera traps now routinely used in wildlife monitoring projects. However, few studies have attempted to validate estimates of activity patterns obtained from camera traps against those obtained from activity sensors. In this study, we compared the diel activity pattern of the Eurasian lynx Lynx lynx inferred from detections by a network of over 300 camera traps active between 2010 and 2020, to activity patterns obtained from 18 GPS-collared lynx (8 females, 10 males) equipped with 2-axis accelerometer sensors, in the same area of southern Norway. Our results suggest that camera traps can be used to estimate diel activity curves that are comparable to those obtained from accelerometers. In our study 75 detections were sufficient to approximate the diel activity pattern obtained from accelerometer. Subsampling indicated that a low number of detections results in a coarser approximation of the diel activity pattern.</p> </div> </div> </div> </div>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.