Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
8,028
datasets available to search
ShareScore release 0.9.0
Dataset results
8,028 results for “Influencer”
Drivers of spatial and temporal micro- and mesozooplankton dynamics in an estuary under strong anthropogenic influences (The Eastern Scheldt, Netherlands)
<p>Supplement to: Horn, H.G., van Rijswijk, P., Soetaert, K., van Oevelen, D. (2023): Drivers of spatial and temporal micro- and mesozooplankton dynamics in an estuary under strong anthropogenic influences (The Eastern Scheldt, Netherlands). J Sea Res. <a href="https://doi.org/10.1016/j.seares.2023.102357">https://doi.org/10.1016/j.seares.2023.102357</a></p> <p>This data set contains mesozooplankton and microzooplankton abundances, temperature, salinity, O2, DOC, Chl.a, SPM, and nutrient concentrations from eight stations in the Eastern Scheldt sampled in 2018. Phytoplankton growth and microzooplankton grazing rates from dilution experiments are also provided.</p>
Simulation Data for the article 'The Influence of Cloud Condensation Nucleus (CCN) Coagulation on the Venus Cloud Structure'
<p>This dataset contains the NetCDF output files from simulations using PlanetCARMA in support of the work published in the manuscript, "The Influence of Cloud Condensation Nucleus (CCN) Coagulation on the Venus Cloud Structure." A summary of the included NetCDF data is found in the README file that is part of the data object. The submission version of this dataset contains only those simulations that provided data that were discussed in the accepted final manuscript. However, additional simulations were carried out in the course of the work, and are described in the manuscript. Upon request, the authors will revise this data repository by adding such data products from among that list as may be requested by others.</p>
Supplementary data for: "The influence of reef isostasy, dynamic topography, and glacial isostatic adjustment on the Last Interglacial sea-level record of Northeastern Australia"
<p>This repository contains supplementary information and data for the paper: ""The influence of reef isostasy, dynamic topography, and glacial isostatic adjustment on the Last Interglacial sea-level record of Northeastern Australia", submitted to Communications Earth & Environment.</p> <p>This version (1.1) was produced to answer comments from reviewers.</p>
Supplementary data for "Influence of prey availability on habitat selection during the non-breeding period in a resident bird of prey"
<p><strong>Abstract</strong></p> <p>Background: For resident birds of prey in the temperate zone, the cold non-breeding period can have strong impacts on survival and reproduction with implications for population dynamics. Therefore, the non-breeding period should receive the same attention as other parts of the annual life cycle. Birds of prey in intensively managed agricultural areas are repeatedly confronted with unpredictable, rapid changes in their habitat due to agricultural practices such as mowing, harvesting, and ploughing. Such a dynamic landscape likely affects prey distribution and availability and may even result in changes in habitat selection of the predator throughout the annual cycle.</p> <p>Methods: In the present study, we 1) quantified barn owl prey availability in different habitats across the annual cycle, 2) quantified the size and location of barn owl breeding and non-breeding home ranges using GPS-data, 3) assessed habitat selection in relation to prey availability during the non-breeding period, and 4) discussed differences in habitat selection during the non-breeding period to habitat selection during the breeding period.</p> <p>Results: The patchier prey distribution during the non-breeding period compared to the breeding period led to habitat selection towards grassland during the non-breeding period. The size of barn owl home ranges during breeding and non-breeding were similar, but there was a small shift in home range location which was more pronounced in females than males. The changes in prey availability led to a mainly grassland-oriented habitat selection during the non-breeding period. Further, our results showed the importance of biodiversity promotion areas and undisturbed field margins within the intensively managed agricultural landscape. </p> <p>Conclusions: We showed that different prey availability in habitat categories can lead to changes in habitat preference between the breeding and the non-breeding period. Given these results we show how important it is to maintain and enhance structural diversity in intensive agricultural landscapes, to effectively protect birds of prey specialised on small mammals. Hereafter we provide the datasets and R script to reproduce the resource selection functions.</p>
Heterogeneous environmental seascape across a biogeographic break influences the thermal physiology and tolerances to ocean acidification in an ecosystem engineer
<p>Dataset for the metabolic rates of limpets under two different pCO2/pH conditions</p> <p>MR are in O2 mg h−1g−1</p>
Temporal variation in spider trophic interactions is explained by the influence of weather on prey communities, web building and prey choice
<p>Materials and Methods</p> <p><em>Fieldwork</em><em> and sample processing</em></p> <p>Field collection and sample processing has been described previously by Cuff, Tercel, et al., (2022), but is briefly described in Supplementary Information 1. In short, money spiders (Araneae: Linyphiidae) and wolf spiders (Araneae: Lycosidae) were collected from occupied webs and the ground in barley fields between April and September 2018. Linyphiids occupying webs (n = 78) were prioritised for collection, but ground-active linyphiid and lycosid spiders were also collected. For each linyphiid taken from a web, the height of the web from the ground (mm) and its approximate dimensions were recorded, the latter calculated as approximate web area (mm<sup>2</sup>). To obtain data on local prey density, ground and crop stems were suction sampled using a ‘G-vac’ for approximately 30 seconds at each 4 m<sup>2</sup> quadrat from which spiders were collected. Extraction, amplification and sequencing of DNA, and bioinformatic analysis is described by Cuff, Tercel, et al. (2022) and Drake et al. (2022), and is also detailed in Supplementary Information 2. Amplification was carried out using two complementary PCR primer pairs: one targeting invertebrates generally, and one intended to exclude amplification of spider DNA to reduce the prevalence of ‘host’ reads in the data output (Cuff et al. 2023). Amplicons were sequenced via Illumina MiSeq V3 with 2x300 bp paired-end reads. The resultant sequencing read counts were converted to presence-absence data of each detected prey taxon in each individual spider. Given the prevalence of sequencing reads associated with each spider analysed and the impossibility of disentangling these from detections of intraspecific predation (i.e., cannibalism), all such reads were removed (Cuff et al. 2023), although intrageneric and intrafamilial predation were still detected.</p> <p> </p> <p><em>Weather data</em></p> <p>Weather data were taken from publicly available reports from the Cardiff Airport weather station (6.6 km from the study site) via “Wunderground” (Wunderground, 2020), to represent local weather conditions. This does not necessarily reflect smaller-scale effects (e.g., microclimate-scale; Bell, 2014; Holtzer et al., 1988), but the timescale of detection for dietary metabarcoding reduces the value of that resolution given that spiders may forage across multiple microclimates. We collated data from 1<sup>st</sup> January 2018 to 17<sup>th</sup> September 2018 (the last field collection). Weather data were also separately extracted for the week preceding each of the two 2017 collection dates (3<sup>rd</sup> to 9<sup>th</sup> August and 29<sup>th</sup> August to 4<sup>th</sup> September 2017). Specifically, daily average temperatures (°C), daily average dew point (°C), maximum daily wind speed (km h<sup>-1</sup>), daily sea level pressure (hPa) and day length (min; sunrise to sunset) were recorded. Precipitation data were downloaded via the UK Met Office Hadley Centre Observation Data (UK Met Office, 2020) as regional precipitation (mm) for South West England & Wales. Weather data were converted to mean values for seven days preceding the collection of spider samples to correspond with the longevity of DNA in the guts of spiders (Greenstone et al., 2014).</p> <p> </p> <p><em>Statistical Analysis</em></p> <p>All analyses were conducted in R v4.0.3 (R Core Team, 2020). To assess how weather affects spider trophic interactions over time, we analysed dietary changes across weather gradients using multivariate models. To identify whether this was likely to be driven by changes in prey abundance, we assessed the corresponding changes in the prey communities and then used null models to ascertain whether spiders were responding to prey abundance changes through prey choice. Given the dependence of linyphiid spiders on webs for foraging, we also compared web height and area over weather gradients to assess whether this may be a component of adaptive foraging. To assess the inter-annual consistency of prey choices in response to weather conditions, we also assessed whether prey preference data could be used to improve the predictive power of prey choice models. For this, we generated null models for 2017 data with prey abundance weighted by prey preferences estimated with the 2018 data. This allowed us to assess the consistency of prey choice under similar conditions, but also provides insight as to whether this framework can be used to predict predator responses to diverse prey communities under dynamic conditions. We detail the specific stages of this analytical framework in the below sections.</p> <p> </p> <p><em>Sampling completeness and diversity assessment</em></p> <p>To assess the diversity represented by the dietary analysis and the invertebrate community sampling, and the completeness of those datasets, coverage-based rarefaction and extrapolation were carried out, and Hill diversity calculated (Chao et al., 2014; Roswell, Dushoff, & Winfree, 2021). This was performed using the ‘iNEXT’ package with species represented by frequency-of-occurrence across samples (Chao et al., 2014; Hsieh et al., 2016; Figures S4 & S6).</p> <p> </p> <p><em>Relationships between weather, spider trophic interactions and prey community composition</em></p> <p>Prey species that occurred in only one spider individual were removed before further analyses to prevent outliers skewing the results. Spider trophic interactions were related to temporal and weather variables in multivariate generalized linear models (MGLMs) with a binomial error family (Wang, Naumann, Wright, & Warton, 2012). Trophic interactions were related to temporal variables and their pairwise interactions (including spider genus to account for any confounding effect), weather variables and their pairwise interactions, and weather variables and their interactions with spider genus and time (to account for any confounding effects) in three separate MGLMs. These variables were separated into different models (Temporal model, Weather interaction model and Confounding effects model) to improve model fit and reduce singularity. Invertebrate communities from suction sampling were related to temporal and weather variables in identically structured MGLMs (excluding the spider genus variable) with a Poisson error family.</p> <p>All MGLMs were fitted using the ‘manyglm’ function in the ‘mvabund’ package (Wang et al., 2012). ‘Temporal model’ independent variables were calendar day (<em>day</em>), mean day length in minutes for the preceding week (<em>day length</em>), spider genus (for dietary models only, to ascertain any effect of spider taxonomic differences on dietary differences over time and day lengths) and all two-way interactions between these variables. ‘Weather interaction model’ independent variables were mean temperature, precipitation, dewpoint, wind speed and pressure for the preceding week, and pairwise interactions between weather variables. ‘Confounding effects model’ independent variables were day (to investigate the interaction between time and weather), spider genus (for dietary models only, to ascertain any effect of spider taxonomic differences on dietary differences over time and day lengths), mean temperature, precipitation, dewpoint, wind speed and pressure for the preceding week, and two-way interactions of each weather variable with day and genus.</p> <p>Trophic interaction and community differences were visualised by non-metric multidimensional scaling (NMDS) using the ‘metaMDS’ function in the ‘vegan’ package (Oksanen et al., 2016) in two dimensions and 999 simulations, with Jaccard distance for spider diets and Bray-Curtis distance for invertebrate communities. For the dietary NMDS, outliers (n = 21; samples containing rare taxa) obscured variation on one axis and were thus removed to facilitate separation of samples and achieve minimum stress. For visualization of the effect of continuous variables against the NMDS, surf plots were created with scaled coloured contours using the ‘ordisurf’ function in the ‘ggplot’ package (Wickham, 2016).</p> <p> </p> <p><em>Relationships between web characteristics and weather variables</em></p> <p>Web area and height were compared against weather and temporal variables using a multivariate linear model (MLM) with the ‘manylm’ command in ‘mvabund’ (Wang et al., 2012). Log-transformed web area and height comprised the multivariate dependent variable, and day, spider genus, temperature, precipitation, dewpoint, wind, pressure and two-way interactions between each of these and day and genus comprised the independent variables.</p> <p> </p> <p><em>Variation in spider prey choice across weather conditions</em></p> <p>To separately represent spiders from different weather conditions in prey choice analyses, sample dates for every spider were clustered based on the mean weather conditions (temperature, precipitation, dewpoint, wind and pressure) of the week before collection (7 days, to align approximately with spider gut DNA half-life; Greenstone et al., 2014). Alongside data from 2018 (n = 24 collection dates), two sampling periods from 2017 were included in the clustering to ascertain similarity of weather conditions for additional inter-annual prey choice analyses described below. The clustering process is described in Supplementary Information 3. Five clusters were generated: High Pressure (HPR), Hot (HOT), Wet Low Dewpoint (WLD), Dry Windy (DWI), Wet Moderate Dewpoint (WMD), and 2017 (2017 sampling periods).</p> <p>Prey preferences of spiders in each of the weather clusters was analysed using network-based null models in the ‘econullnetr’ package (Vaughan et al., 2018) with the ‘generate_null_net’ command. Consumer nodes in this case represented spiders belonging to each of the weather clusters. Econullnetr generates null models based on prey abundance, represented here by suction sample data, to predict how consumers will forage if based on the abundance of resources alone. These null models are then compared against the observed interactions of consumers (i.e., interactions of spiders within each weather cluster with their prey) to ascertain the extent to which resource choice deviated from random (i.e., density dependence). The trophic network was visualised with the associated prey choice effect sizes using ‘igraph’ (Csardi & Nepusz, 2006) with a circular layout, and as a bipartite network using ‘ggnetwork’ (Briatte, 2021; Wickham, 2016). The normalised degree of each weather cluster node was generated using the ‘bipartite’ package (Dormann, Gruber, & Fruend, 2008) and compared against the normalised degree of the same node in the null network to determine whether spiders were more or less generalist than expected by random. Prior to the prey choice analysis, an hemipteran prey identified no further than order level through dietary analysis was removed due to the inability to pair it to any present prey taxa with certainty.</p> <p> </p> <p><em>Validating and predicting relationships between years</em></p> <p>To test how generalisable the results are and the extent to which weather drives prey preferences, we used a measure of prey preference (observed/expected values; observed interaction frequencies divided by interaction frequencies expected by null models) from the above prey choice analysis to assess whether we could more accurately predict observed trophic interactions under similar weather conditions for data from a linked study at the same location in 2017. These additional data represent a subset of the spider taxa analysed above (<em>Tenuiphantes tenuis</em> and <em>Erigone</em> spp.) collected using the same methods by the same researchers and in the same locality (Cuff, Drake, et al., 2021).</p> <p>The similarity in weather conditions between the 2017 study period and each of the five 2018 weather clusters was determined via NMDS of the weather data in two dimensions with Euclidean distance. Centroid coordinates for each 2018 weather cluster and the 2017 data were extracted and pairwise distances calculated between weather clusters:</p> <p> </p> <p>In order, the most proximate weather clusters to the 2017 weather data were HPR (mean Euclidean distance = 8.845), HOT (9.290), WMD (13.626), DWI (13.817) and WLD (18.682; Figure S3).</p> <p>To facilitate comparison between the two years, observed/expected values from the 2018 prey choice models were extracted separately for each of the weather clusters and scaled between 0.1 and 1. For this, 0.1 was used as a minimum since 0 would result in interactions being excluded altogether in the null models, and one as a maximum given the limits of econullnetr but also because this is a multiplier applied to the prey abundances, so greater values would skew prey abundances beyond realistic proportions. Scaling was achieved by the following equation:</p> <p> </p> <p>Missing values (e.g., prey that were absent in certain weather conditions) were represented as 1 to prevent transformation of their abundances in the null models; this treats prey for which data were absent naively, but could increase perceived preferences for them. The scaled values were used to weight the abundance of prey available to the spiders in the 2017 data using the weighting option in econullnetr, whereby values less than 1 proportionally reduce the probability of that taxon being predated in the null models. This effectively redistributes the 2017 relative prey abundance data according to the preference effect sizes generated for each of the 2018 weather clusters. If prey preferences are similar between the 2017 spiders and those from the weather cluster being used to weight the model, the composition of simulated diets should more closely resemble observed diets and fewer significant deviations from the null model should be found.</p> <p>Null models were generated as above (<em>Variation in spider prey choice across weather conditions</em>) but based on the prey availability and trophic interactions from 2017 samples. Three types of model were run: i) a conventional model based on observed prey abundances; ii) a model with prey abundances set to be equal across all prey taxa; and iii) observed prey abundances weighted by prey preferences determined for each of the weather clusters in the 2018 prey choice analysis. A separate model was run for each 2018 weather cluster with abundances weighted by the corresponding scaled observed/expected values. The unweighted conventional model was compared against weighted models to ascertain whether the prey preference weightings from 2018 improved the predictive power of the null models. To compare effect sizes between the unweighted and each other null model for each resource taxon, mean standardised effect size (SES) values were calculated from the paired ‘pre-harvest’ and ‘post-harvest’ data from each model, and paired <em>t</em>-tests were carried out with these between the unweighted and each weighted model. The SES values were plotted for each model and joined between taxa to visualise these paired differences using ‘ggplot’ (Wickham, 2016). Null model-predicted trophic interactions were generated via a modified ‘econullnetr’ function (generate_null_net_indiv) which produces outputs at the individual level to generate simulated diets for individual spiders to compare dietary composition between null model predictions and observed data. These models were run with 2300 simulations to represent 50 simulations per individual spider in the 2017 dataset (n = 46). Null diets were associated with sample IDs by aggregating the 50 simulations per sample and retaining a mean incidence of prey (i.e., mean occurrence across all 50 simulations). A visualisation of the per-sample differences in null model and observed data was generated via NMDS. Mean centroid coordinates for the observed 2017 data and the predicted diets of each model were extracted and the Euclidean distance between the observed data centroid and that of each model was calculated (as above for weather conditions).</p> <p> </p> <p><strong>Supplementary Information 1: Field collection and sample processing</strong></p> <p>Money spiders (Araneae: Linyphiidae) and wolf spiders (Araneae: Lycosidae) were visually located along transects in two adjacent barley fields at Burdons Farm, Wenvoe in South Wales (51°26'24.8"N, 3°16'17.9"W) and collected from occupied webs and the ground, between April and September 2018 (five visits per week of which spiders from 24 collection dates were used). Transects were randomly distributed across the entire field. Along these transects, 64 separate 4 m<sup>2</sup> quadrats, at least 10 m apart, were searched and all observed linyphiids and lycosids were collected. Spiders were placed in 100 % ethanol using an aspirator, regularly changing meshing to limit potential cross-contamination. Linyphiids occupying webs were prioritised for collection, but ground-active linyphiid spiders were also collected. For each spider taken from a web, the height of the web from the ground (mm) and its approximate dimensions were recorded, the latter calculated as approximate web area (mm<sup>2</sup>). Spiders were taken to Cardiff University, transferred to fresh ethanol, adults identified to species-level and juveniles to genus, and stored at -80 °C in 100 % ethanol until DNA extraction.</p> <p>To obtain data on local prey density, ground and crop stems were suction sampled using a ‘G-vac’ for approximately 30 seconds at each 4 m<sup>2</sup> quadrat (n = 64) from which spiders were collected. The collected material was emptied into a bag, any organisms immediately killed with ethyl-acetate and material frozen for storage before sorting into 70 % ethanol in the lab. All invertebrates were identified to family level to match the resolution of the least resolved of the metabarcoding-derived trophic interaction data, and due to difficulties associated with identification to finer taxonomic resolution for many taxa. Exceptions included springtails of the superfamily Sminthuroidea (Sminthuridae and Bourletiellidae were often indistinguishable following suction sampling and preservation due to the fine features necessary to distinguish them) which were left at super-family, mites (many of which were immature or in poor condition) which were identified to order level, and wasps of the superfamily Ichneumonoidea which were identified no further due to obscurity of wing venation due to damage.</p> <p> </p> <p><strong>Supplementary Information 2: Molecular analysis and bioinformatics</strong></p> <p><em>Extraction and high-throughput sequencing of spider gut DNA</em></p> <p>Given their prevalence in field collections, dietary analysis was carried out for the linyphiid genera <em>Erigone</em>, <em>Tenuiphantes</em>, <em>Bathyphantes</em> and <em>Microlinyphia </em>(Araneae: Linyphiidae), and the Lycosidae genus <em>Pardosa</em>. Spiders were transferred to and washed in fresh 100 % ethanol to reduce external contaminants prior to identification via morphological key (Roberts, 1993). Abdomens were removed from spiders and again transferred to and washed in fresh 100 % ethanol. DNA was extracted from the abdomens via Qiagen TissueLyser II and DNeasy Blood & Tissue Kit (Qiagen) as per the manufacturer protocol, but with an extended lysis time of 12 hours to account for the complex and branched gut system in spider abdomens (Krehenwinkel et al., 2017).</p> <p>For amplification of DNA, two primer pairs were used. BerenF-LuthienR (Cuff et al., 2021) amplified a broad range of invertebrates including spiders, and TelperionF-LaureR (Cuff et al., 2022), amplified a range of invertebrates but fewer spiders. Primers were labelled with unique 10 bp molecular identifier tags (MID-tags) so that each individual had a unique pairing of forward and reverse tags for identification of each spider post-sequencing. PCR reactions of 25 µl contained 12.5 µl Qiagen PCR Multiplex kit, 0.2 µmol (2.5 µl of 2 µM) of each primer and 5 µl template DNA. Reactions were carried out in the same thermocycler, optimised via temperature gradient, with an initial 15 minutes at 95 °C, 35 cycles of 95 °C for 30 seconds, the primer-specific annealing temperature for 90 seconds and 72 °C for 90 seconds, respectively, followed by a final extension at 72 °C for 10 minutes. BerenF-LuthienR and TelperionF-LaureR used annealing temperatures of 52 °C and 42 °C, respectively.</p> <p>Within each PCR 96-well plate, 12 negative controls (extraction and PCR), 2 blank controls and 2 positive controls were included (i.e. 80 samples per plate), based on Taberlet <em>et al. </em>(2018). Positive controls were mixtures of invertebrate DNA comprised of non-native Asiatic species in four different proportions and blanks were empty wells within each plate to identify tag-jumping into unused MID-tag combinations. PCR negative controls were DNase-free water treated identically to DNA samples. A negative control was present for each MID-tag to identify any contamination of primers. All PCR products were visualised in a 2 % agarose gel with SYBRSafe (Thermo Fisher Scientific, Paisley, UK) and placed in categories based on their relative brightness. The concentration of these brightness categories was quantified via Qubit dsDNA High-sensitivity Assay Kits (Thermo Fisher Scientific, Waltham, MA, USA) with at least three representatives of each category per plate. The PCR products were then proportionally pooled according to these concentrations. Each pool was cleaned via SPRIselect beads (Beckman Coulter, Brea, USA), with a left-side size selection using a 1:1 ratio (retaining ~300-1000 bp fragments). The concentration of the pooled DNA was then determined via Qubit dsDNA High-sensitivity Assay Kits and pooled together into one library per primer pair. Library preparation for Illumina sequencing was carried out on the cleaned libraries via NEXTflex Rapid DNA-Seq Kit (Bioo Scientific, Austin, USA) and samples were sequenced on an Illumina MiSeq via a V3 chip with 300-bp paired-end reads (expected capacity ≤25,000,000 reads).</p> <p><em>Bioinformatic analysis</em></p> <p>Bioinformatic analysis followed Drake et al., (2022). The Illumina run generated 11,165,405 and 10,959,010 reads for BerenF-LuthienR and TelperionF-LaureR, respectively, which were quality-checked and paired via FastP (Chen et al., 2018) to retain only sequences of at least 200 bp with a quality threshold of 33, resulting in 10,561,874 and 9,355,112 paired reads. The paired reads were demultiplexed and assigned to their respective spider sample according to their MID-tags via the “trim.seqs” command in Mothur v1.39.5 (Schloss et al., 2009), leaving 7,854,610 and 7,437,929 reads with exact matches to the primer and MID-tags.</p> <p>Replicates were removed, and denoising and clustering to zero-radius operational taxonomic units (ZOTUs; clustered without % identity to avoid multiple species represented within a single operational taxonomic unit (OTU)) completed via Unoise3 in Usearch11 (Edgar, 2010). The resultant sequences were assigned a taxonomic identity from GenBank via BLASTn v2.7.1 (Camacho et al., 2009) using a 97 % identity threshold (Alberdi et al., 2017). The BLAST output was analysed in MEGAN v6.15.2 (Huson et al., 2016). Where the top BLAST hit, determined by lowest e-value, was resolved at a higher taxonomic level than species-level, the results were checked; where possibly erroneous entries were preventing species-level assignment (e.g., poorly resolved identifications on GenBank), finer resolution was assigned based on the next-closest match. Where ZOTUs were assigned the same taxon, these were aggregated.</p> <p>Data clean-up used the optimal minimum sequence copy thresholds identified by Drake et al. (2022). The maximum value for a ZOTU present in blank or negative controls was identified and subtracted from all read counts for that ZOTU to remove background contaminants. Simultaneously, known lab contaminants (e.g., German cockroach <em>Blattella germanica</em>), artefacts and errors of the sequencing process, unexpected reads in positive controls and positive control taxon reads in dietary samples were identified. These were calculated as a percentage of their respective sample’s read count and any read counts lower than the highest of these percentages for their respective sample were removed to eliminate additional instances of contamination. These thresholds were defined as 0.38 % and 0.39 % for BerenF-LuthienR and TelperionF-LaureR, respectively. The data from the two libraries (i.e., from each primer pair) were then aggregated together by sample and aggregated again by taxon. Non-target taxa (e.g., fungi) and instances in which predator DNA was amplified (i.e., ZOTUs with high read counts matching the individual’s morphological identity) were removed. All remaining read counts were converted to presence-absence.</p> <p> </p> <p><strong>Supplementary Information 3: Cluster analysis</strong></p> <p>Prior to clustering, weather variables were scaled by subtracting the mean and dividing by the standard deviation. A Euclidean distance matrix was calculated using the ‘dist’ function, and this scaled distance matrix was hierarchically clustered using the ‘hclust’ function. Optimal clustering solutions were determined by comparison of Dunn’s index between methods and <em>k</em> values; this was calculated using the ‘dunn’ function in the “clValid” package (Brock et al., 2008) for each cluster <em>k</em> value above five until the Dunn index decreased. The <em>k</em> value after which Dunn’s index decreased was deemed the optimal solution for each clustering method. Clustering methods based on ‘average’, ‘complete’, ‘single’, ‘median’, ‘centroid’ and ‘mcquitty’ linkages were compared, and the ‘complete’ method selected for subsequent analysis as it resulted in the smallest number of clusters (6; thus, the most efficient simplification of the data; Figure S1). Different clustering methods altered the composition of some clusters, but most sampling dates showed consistent clustering between methods.</p> <p>A heatmap dendrogram was produced using the ‘heatmap.2’ function in the ‘gplots’ package (Warnes et al., 2020), with cluster colours assigned with the ‘Accent’ palette of ‘RColorBrewer’ (Neuwirth, 2014) and relative weather value colour scaling generated using the ‘viridis’ package (Garnier 2018; Figure S2). Weather clusters were named according to unique characteristics relative to the other clusters. These names comprise: High Pressure (HPR; days 142, 253, 256, 250, 173), Hot (HOT; days 162, 204, 205, 208, 201, 187, 198, 197, 183, 184, 194, 190 and 191), Wet Low Dewpoint (WLD; day 121), Dry Windy (DWI; days 131, 169 and 170), Wet Moderate Dewpoint (WMD; days 149 and 152), and 2017 (pre- and post-harvest 2017 sampling periods).</p> <p> </p> <p> </p> <p><strong>References</strong></p> <p>Alberdi, A., Aizpurua, O., Gilbert, M. T. P., & Bohmann, K. (2017). Scrutinizing key steps for reliable metabarcoding of environmental samples. <em>Methods in Ecology and Evolution</em>, <em>9</em>(1), 1–14. https://doi.org/10.1111/2041-210X.12849</p> <p>Brock, G., Pihur, V., Datta, S., & Datta, S. (2008). clValid: an R package for cluster validation. <em>Journal of Statistical Software</em>, <em>25</em>(4), 1–22.</p> <p>Camacho, C., Coulouris, G., Avagyan, V., Ma, N., Papadopoulos, J., Bealer, K., & Madden, T. L. (2009). BLAST+: architecture and applications. <em>BMC Bioinformatics</em>, <em>10</em>, 1–9. https://doi.org/10.1186/1471-2105-10-421</p> <p>Chen, S., Zhou, Y., Chen, Y., & Gu, J. (2018). Fastp: An ultra-fast all-in-one FASTQ preprocessor. <em>Bioinformatics</em>, <em>34</em>(17), i884–i890. https://doi.org/10.1093/bioinformatics/bty560</p> <p>Cuff, J. P., Drake, L. E., Tercel, M. P. T. G., Stockdale, J. E., Orozco-terWengel, P., Bell, J. R., Vaughan, I. P., Müller, C. T., & Symondson, W. O. C. (2021). Money spider dietary choice in pre- and post-harvest cereal crops using metabarcoding. <em>Ecological Entomology</em>, <em>46</em>(2), 249–261.</p> <p>Cuff, J. P., Tercel, M. P. T. G., Drake, L. E., Vaughan, I. P., Bell, J. R., Orozco-terWengel, P., Müller, C. T., & Symondson, W. O. C. (2022). Density-independent prey choice, taxonomy, life history and web characteristics determine the diet and biocontrol potential of spiders (Linyphiidae and Lycosidae) in cereal crops. <em>Environmental DNA</em>, <em>4</em>(3), 549–564.</p> <p>Drake, L. E., Cuff, J. P., Young, R. E., Marchbank, A., Chadwick, E. A., & Symondson, W. O. C. (2022). An assessment of minimum sequence copy thresholds for identifying and reducing the prevalence of artefacts in dietary metabarcoding data. <em>Methods in Ecology and Evolution</em>, <em>13</em>(3), 694–710.</p> <p>Edgar, R. C. (2010). Search and clustering orders of magnitude faster than BLAST. <em>Bioinformatics</em>, <em>26</em>(19), 2460–2461. https://doi.org/10.1093/bioinformatics/btq461</p> <p>Garnier, S. (2018). <em>viridis: default color maps from ‘matplotlib’</em> (0.5.1). https://cran.r-project.org/package=viridis</p> <p>Huson, D. H., Beier, S., Flade, I., Górska, A., El-Hadidi, M., Mitra, S., Ruscheweyh, H. J., & Tappu, R. (2016). MEGAN Community Edition - interactive exploration and analysis of large-scale microbiome sequencing data. <em>PLoS Computational Biology</em>, <em>12</em>(6), 1–12. https://doi.org/10.1371/journal.pcbi.1004957</p> <p>Krehenwinkel, H., Kennedy, S., Pekár, S., & Gillespie, R. G. (2017). A cost-efficient and simple protocol to enrich prey DNA from extractions of predatory arthropods for large-scale gut content analysis by Illumina sequencing. <em>Methods in Ecology and Evolution</em>, <em>8</em>, 126–134. https://doi.org/10.1111/2041-210X.12647</p> <p>Neuwirth, E. (2014). <em>RColorBrewer: ColorBrewer palettes</em> (1.1-2). https://cran.r-project.org/package=RColorBrewer</p> <p>Roberts, M. J. (1993). <em>The Spiders of Great Britain and Ireland (Compact Edition)</em> (3rd ed.). Harley Books.</p> <p>Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., Lesniewski, R. A., Oakley, B. B., Parks, D. H., Robinson, C. J., Sahl, J. W., Stres, B., Thallinger, G. G., Van Horn, D. J., & Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. <em>Applied and Environmental Microbiology</em>, <em>75</em>(23), 7537–7541. https://doi.org/10.1128/AEM.01541-09</p> <p>Taberlet, P., Bonin, A., Zinger, L., & Coissac, E. (2018). <em>Environmental DNA</em>. Oxford University Press.</p> <p>Warnes, G. R., Bolker, B., Bonebakker, L., Gentleman, R., Huber, W., Liaw, A., Lumley, T., Maechler, M., Magnusson, A., Moeller, S., Schwartz, M., & Venables, B. (2020). <em>gplots: Various R programming tools for plotting data</em> (R package version 3.1.0). https://cran.r-project.org/package=gplots</p>
Extensive crowdsourced dataset of in-situ evaluated binaural soundscapes of private dwellings containing subjective sound-related and situational ratings along with person factors to study time-varying influences on sound perception — research data
<p><strong>Abstract:</strong></p> <p>The soundscape approach highlights the role of situational factors in sound evaluations; however, only a few studies have applied a multi‐domain approach including sound‐related, person‐related, and time‐varying situational variables. Therefore, we conducted a study based on the Experience Sampling Method to measure the relative contribution of a broad range of potentially relevant acoustic and non‐auditory variables in predicting indoor soundscape evaluations. Here we present the comprehensive dataset for which 105 participants reported temporally (rather) stable trait variables such as noise sensitivity, trait affect, and quality of life. They rated 6.594 situations regarding the soundscape standard dimensions, perceived loudness, and the saliency of its sound components and evaluated situational variables such as state affect, perceived control, activity, and location. To complement these subject‐centered data, we additionally crowdsourced object‐centered data by having participants make binaural measurements of each indoor soundscape at their homes using a low‐(self‐)noise recorder. These recordings were used to compute (psycho‐)acoustical indices such as the energetically averaged loudness level, the A‐weighted energetically averaged equivalent continuous sound pressure level, and the A‐weighted five‐percent exceedance level. This complex hierarchical data can be used to investigate time‐varying non‐auditory influences on sound perception and to develop soundscape indicators based on the binaural recordings to predict soundscape evaluations.</p> <p><strong>Content:</strong></p> <ul> <li><a href="https://zenodo.org/record/7858848/files/01%20StudyDescription.pdf">01 StudyDescription.pdf </a> <ul> <li>Description of the field study.</li> <li>Information about the methods and materials used.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/02%20Dataset.csv">02 Dataset.csv</a> <ul> <li>The dataset, consisting of 93 variables describing 6594 observations taken by 105 participants.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/03%20VariableDescriptions_EnglishPersonQuestionnaire.pdf">03 VariableDescriptions_EnglishPersonQuestionnaire.pdf</a> <ul> <li>Descriptions of all variables, their measurement scale, scale ranges and levels.</li> <li>Questions and task descriptions of the Experience Sampling Method questionnaire in German language with an English translation.</li> <li>English translations of questions asked in the person questionnaire.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/04%20ESM-Questionnaire.pdf">04 ESM-Questionnaire.pdf</a> <ul> <li>Screenshots of the original Experience Sampling Method questionnaire with English translations.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/05%20PersonQuestionnaire_OriginalGermanVersion.pdf">05 PersonQuestionnaire_OriginalGermanVersion.pdf</a> <ul> <li>Original version of the person questionnaire in German language.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/06%20HelpTexts.pdf">06 HelpTexts.pdf</a> <ul> <li>Descriptions of the study task.</li> <li>Explanations of the scales used in the questionnaire.</li> <li>Explanations of the sound categories and the soundscape composition.</li> <li>Explanation of the operation of the recording device.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/AcousticFeatures_README.md">AcousticFeatures_README.md</a> <a href="https://zenodo.org/api/files/3d784540-c0f4-412f-8742-df1db6f5401d/TimeSeries_and_Spectrograms_README.md?versionId=9291496c-d2c6-4151-96f1-a2ad99e1a540"> </a> <ul> <li>Descriptions of the structure of the AcousticFeatures_xxx.csv and .zip files.</li> <li>Analyis settings used in Artemis Suite to generate the acoustic features.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/AcousticFeatures_SingleValues.csv">AcousticFeatures_SingleValues.csv</a> <ul> <li>All acoustic features, aggregated to single values per feature, recording, and channel.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/AcousticFeatures_Spectra.csv">AcousticFeatures_Spectra.csv</a> <ul> <li>Time-averaged 1/3 octave spectra of each channel of each recording, A-weichted and un-weighted.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/AcousticFeatures_Spectrograms.zip">AcousticFeatures_Spectrograms.zip</a> <ul> <li>13188 .csv files with un-weighted spetrograms of each channel of each recording.</li> </ul> </li> <li><a href="https://zenodo.org/record/7858848/files/AcousticFeatures_TimeSeries.zip">AcousticFeatures_TimeSeries.zip</a> <ul> <li>A .csv file containing LAeq and LZeq time series of each channel of each recording.</li> </ul> </li> </ul> <p><strong>Publications refering to this dataset:</strong></p> <p>Versümer, Siegbert; Steffens, Jochen; Weinzierl, Stefan (currently under review): "The role of loudness predictions, personal and situational factors in day-to-day loudness assessments of indoor soundscapes."</p> <p><strong>Funding:</strong></p> <p>This study was sponsored by the German Federal Ministry of Education and Research. “FHprofUnt” funding code: 13FH729IX6. </p> <p><strong>License: </strong></p> <p>CC 4.0 BY, <a href="https://creativecommons.org/licenses/by/4.0/legalcode">https://creativecommons.org/licenses/by/4.0/legalcode</a></p> <p><strong>Version history:</strong></p> <p>Details can be found in the <a href="https://zenodo.org/api/files/a15d6a91-1a35-4b5e-a7ec-da8a9bcbee2b/Changelog.md">Changelog.md</a> file.</p> <ul> <li> V.01.0. March 7, 2023: Initial publication. <a href="https://doi.org/10.5281/zenodo.7193938">https://doi.org/10.5281/zenodo.7193938</a></li> <li> V.01.1. April 25, 2023. <a href="https://doi.org/10.5281/zenodo.7858848">https://doi.org/10.5281/zenodo.7858848</a></li> </ul>
TCV-X21-GENEX: influence of collisions on the validation of global gyrokinetic simulations
<p>This repository contains the data that supports the findings of the study that is published in <a href="http://doi.org/10.1063/5.0144688"><em>P. Ulbl et al., Phys. Plasmas 30, </em>052507 <em>(2023)</em></a>. Three global electromagnetic gyrokinetic simulations of the <a href="https://doi.org/10.5281/zenodo.5776286">TCV-X21</a> case have been performed. A collisionless (No Coll) simulation, one with a Bhatnagar-Gross-Krook (BGK) collision operator and one with a Fokker-Planck type Lenard-Bernstein/Dougherty (LBD) collision operator.</p> <p>For getting started, please consider the README file provided in this dataset. The Jupyter notebook herein provides a low level entry on how to access the data from the netCDF file. The zip files contain sets of input parameters that are given for future reference.</p>
Dataset for the publication: Elucidating the influence of intercalated anions in NiFe LDH on the electrocatalytic behavior of OER: a kinetic study
<p>This contribution comprehends the dataset derived as basis of the publication on alkaline electrochemical oxygen evolution reaction using nickel iron layered double hydroxides (NiFe LDH) with different intercalated anions. In this related study, the dataset was used to analyse the impact of different intercalated anions on the governing reaction mechanism and rate determining step in the electrocatalytic surface mechanism. The dataset comprehends analysis of the three materals: (1) charging current density versus scan rate, (2) X-ray diffraction patterns, (3) polarization curves, (4) steady-state derived Tafel plots, (5) reaction order analysis, (6) impedance spectroscopy, (7) influence of stirring on polarization curves, (8) not iR corrected values for the activity curves, (9) EIS data and (10) Tafel plots obtained through three different methods. </p>
Raw data: Specialized metabolites accumulation pattern in buckwheat is strongly influenced by accession choice and co-existing weeds
<p>Screening suitable allelopathic crops and crop genotypes that are competitive with weeds can be a sustainable weed control strategy to reduce the massive use of herbicides. In this study, three accessions of common buckwheat <em>Fagopyrum esculentum</em> Moench. (Gema, Kora, and Eva) and one of Tartary buckwheat <em>Fagopyrum tataricum</em> Gaertn. (PI481671) were screened against the germination and growth of the herbicide-resistant weeds <em>Lolium rigidum </em>Gaud. and <em>Portulaca oleracea</em> L. The chemical profile of the four buckwheat accessions was characterised in their shoots, roots, and root exudates in order to know more about their ability to sustainably manage weeds and the relation of this ability with the polyphenol accumulation and exudation from buckwheat plants. Our results show that different buckwheat genotypes may have different capacities to produce and exude several types of specialized metabolites, which lead to a wide range of allelopathic and defence functions in the agroecosystem to sustainably manage the growing weeds in their vicinity. The ability of the different buckwheat accessions to suppress weeds was accession-dependent without differences between species, as the common (Eva, Gema, and Kora) and Tartary (PI481671) accessions did not show any species-dependent pattern in their ability to control the germination and growth of the target weeds. Finally, Gema appeared to be the most promising accession to be evaluated in organic farming due to its capacity to sustainably control target weeds while stimulating the root growth of buckwheat plants.</p>
Simulation result from "Simulating Bark Beetle Outbreak Dynamics and their Influence on Carbon Balance Estimates with ORCHIDEE r7791"
<p>Eight locations were selected which represent the range of climatic conditions within the distribution area of spruce in Europe (<em>Picea Abies</em> Karst L.) as shown in Table 4. Half-hourly weather data from the FLUXNET database <a href="https://www.zotero.org/google-docs/?ibBw15">(Pastorello et al., 2020)</a> for these locations were used to drive ORCHIDEE. Some of these locations (FON, SOR, HES, COL, WET) are not populated with spruce but all are located within the species distribution. For each location, a pure spruce stand was simulated and the available FLUXNET data was looped to simulate a 100-year period. The study did not investigate the effect of species mixture in the simulation experiments. Other inputs, including soil texture, pH and soil color were obtained from the USDA map derived from <a href="https://www.zotero.org/google-docs/?aaWPI6">Eswaran et al. (2003</a>), for the corresponding pixel.</p> <p>The amount of fresh breeding woody substrate inputs used by the bark beetles to breed was controlled by modifying the maximum wind speed of a windthrow event in ORCHIDEE. Seven wind speeds ranging between 19 m/s and 40 m/s were selected (Table 3). This range is justified by the observation that mean wind speeds below 19 m/s could not trigger a windthrow event in ORCHIDEE <a href="https://www.zotero.org/google-docs/?jEqNDm">(Chen et al., 2018)</a> while for wind speeds exceeding 40 m/s, more than 60% of the trees are uprooted, leaving too few living trees to trigger a bark beetle outbreak within the same pixel. </p> <p>To investigate the impact of windthrow intensity and background climate on bark beetle outbreaks, the study conducted a total of 56 [8 sites x 7 wind speed intensities] simulations as given in table 3. The same 56 simulations were also used to analyze the sensitivity of the carbon balance of spruce forests to windthrow intensity and background climate.</p> <p>Where most land surface models use a turnover time to simulate continuous mortality <a href="https://www.zotero.org/google-docs/?5jGfXF">(Thurner et al., 2014; Pugh et al., 2019)</a>, ecological reality is better described by abrupt mortality events. An idealized simulation experiment was used to qualify the impact of abrupt mortality on net biome productivity by changing from a framework in which mortality is approximated by a constant background mortality to a framework in which mortality occurs in abrupt, discrete events. To test the impact of a change in mortality framework two versions of ORCHIDEE were compared to create an idealized simulation experiment: (1) a version simulating mortality as a continuous process, labeled ”the continuous version”, and (2) the version capable of simulating abrupt mortality from windthrow and subsequent bark beetle outbreaks, labeled ”the abrupt version”. The effect of simulating abrupt mortality was evaluated over 20-, 50-, and 100-year time horizons.</p> <p>The effect of changing the framework of simulating mortality from continuous to abrupt was qualified on the basis of 112 simulations (8 sites x 7 wind speeds x 2 model versions) of 100 years each. The simulations with abrupt mortality were run first. Subsequently, the number of trees killed was quantified and used as a reference value for the continuous mortality set-up. This approach resulted in the same quantities of dead trees at the end of the simulation for both frameworks, which then differed only in the timing of the simulated mortality. This precaution is necessary to avoid comparing two different mortality regimes where the result would mainly be explained by the intensity of the mortality rather than by its underlying mechanisms. </p>
Dataset - Downscaling ERA5 Wind Speed Data: A Machine Learning approach considering Topographic Influences
<p>This dataset provides three products:</p> <p><strong>1. The topographic data. </strong></p> <p>These data are provided as GeoTIFF files for Europe with 1km x 1km spatial resolution. These maps include:</p> <ul> <li>Digital Elevation Model (DEM) map: Europe_DEM.tif</li> <li>Slope map: Europe_slope.tif</li> <li>Aspect map: Europe_aspect.tif</li> <li>Topographic Position Index (TPI) with a 5 km radius map: Europe_TPI_5.tif</li> <li>Topographic Position Index (TPI) with a 75 km radius map: Europe_TPI_75.tif</li> <li>Terrain Diversity Index (TDI) map: Europe_TDI.tif</li> </ul> <p>These data can be used as input maps for the preprocessing step. In addition, the two TPI maps can also be used in the regression process.</p> <p><strong>2. The resulting map of the preprocessing step.</strong> </p> <p>This map offers predictions on the quality of ERA5 data across Europe and is also provided as a GeoTIFF file with 1km x 1km spatial resolution under the name:</p> <ul> <li> Europe_classification.tif</li> </ul> <p>In this map, Class1 represents a good ERA5 quality with an RMSE of less than 1.5 m/s, Class2 represents a moderate ERA5 quality with an RMSE bigger than 1.5 m/s but less than 3 m/s, while Class 3 indicates a poor ERA5 quality with an RMSE greater than 3 m/s.</p> <p><strong>3. The downscaled wind speed time series data. </strong></p> <p>Europe has been divided into 64 equal area blocks to accommodate the large data size. Each downscaled dataset is provided as a NetCDF file, offering hourly wind speed time series for a year (8760 hours) at approximately 1km x 1km spatial resolution. Each NetCDF file has three dimensions: 'lon' representing longitude, 'lat' representing latitude, and 'time' representing the hour. The variable name for wind speed in the NetCDF file is 'WindSpeed'. The 'WindSpeed' variable is stored as an Int32 data type in the NetCDF file, with values multiplied by 10000 in order to significantly reduce the data size. To utilize this variable, please divide it by 10000.</p> <p>For regions identified as Class1 and Class2, the downscaled wind speed is obtained through a simple nearest neighbour spatial interpolation of ERA5 due to the good quality of ERA5 in these regions. However, for the regions identified as Class3, the downscaled wind speed is derived using the machine learning-based regression approach described in the relevant publication. The geographic extent and the visual representation for each block are provided in 'Readme.pdf' document.</p> <p> </p> <p>To cite this dataset, please cite our published paper in Environmental Research Letters (<strong>DOI:</strong> 10.1088/1748-9326/aceb0a)</p>
Supplementary data and summary statistics - Genetic influences on circulating retinol and its relationship to human health
<p><strong>Summary statistics from the circulating retinol GWAS</strong></p> <p>See -<em><strong> GWAS_summary_stats_README.txt </strong></em>for details of these files and the header names. METSIM+INTERVAL meta-analyses have a sample size of 17268. The full meta-analysis that includes ATBC+PLCO has a sample size of 22274.</p> <p><strong>Please cite the following if you use any of these data </strong>- Reay, W.R. et al. Genetic influences on circulating retinol and its relationship to human health. Nature Communications (2024).</p> <p>By downloading these summary statistics, investigators agree to the following:</p> <ol> <li>Investigators acknowledge that these data are provided on an “as-is” basis, without warranty of any type, expressed or implied, including but not limited to any warranty as to their performance, merchantability, or fitness for any particular purpose.</li> <li>Investigators will not cross-post these data or make them available elsewhere – this website is the definitive source for these data without express written permission from the study corresponding authors.</li> <li>Investigators will never attempt to identify any participant who contributed to these data.</li> <li>Any commercial or for-profit use of these data is forbidden unless express permission is sought from the study corresponding authors.</li> <li>Investigators will cite the associated manuscript when using these data.</li> </ol> <p><strong>Supplementary data from the circulating retinol GWAS phenome-wide Mendelian randomisation study</strong></p> <p>1. MR_retinol_as_exp - full output from the MR-pheWAS using circulating retinol as the exposure</p>
Dataset for publication "Influence of precursor morphology and cathode processing on performance and cycle life of sodium-zinc chloride (Na-ZnCl2) battery cells"
<p>High-temperature sodium-metal battery; sodium-metal halide battery (ZEBRA); molten-salt battery; zinc battery for stationary energy storage; alkali metal anode.</p> <p>Datasets used in the above manuscript. </p>
Data Sets: The Influence of Synoptic Wind on Land-Sea Breezes
<p>DATA & FILE OVERVIEW</p> <p>This dataset contains the dimensional results of large-eddy simulations in .nc file format conducted over the thirty one simulations detailed in Allouche et al. (2023) (https://doi.org/10.1002/qj.4552) with differing synoptic pressure forcings and alignment angles of the latter with the shoreline. The patterns are altered as to conduct the analysis followed in Allouche et al. (2023) (https://doi.org/10.1002/qj.4552).</p>
Influence of protein corona on cytotoxicity of metal oxide nanoparticles against human keratinocyte cell line (HaCaT)
<p>The model identified, among the factors determining the cytotoxic properties of metal oxide nanoparticles against HaCaT cell lines, a number of variables related to the processes occurring on the surface of nanoparticles in a biological medium, including the ability to form protein corona.</p> <p>The selected descriptors describe both the electronic structure of the metal oxides that are the components of the nanoparticles, i.e. the ionization potential (IP_ActivM_SM_#1, IP_ActivM_SM_#2) and the initial nanoforms, i.e. the particle size (Primary size) and the percentage content of the metal oxide which is the main component of the nanoparticle (Purity_#1) ; characterize nanoparticles in the medium, i.e. the isoelectric point (PZZP_#2), stability (Stability), potential for dissolution (Dissolution), generation of reactive oxygen species (ROS production) and protein adsorption (Protein adsorption). The listed descriptors reflect the features that are discussed in the literature as potentially related to the toxic effect of nanoparticles.</p>
The influence of the properties of inorganic solvents on the hydrodynamic diameter of TiO2 nanoparticles
<p>In this model the property of a nanomaterial is predicted not on the basis of descriptors characterizing the chemical composition of nanoparticles or physical properties of the initial nanoforms, but on the basis of descriptors describing the dispersion medium (pH, IP, D3_HeteroNonMetals) and the property of nanoparticles dependent on it (Potential ζ). </p> <p>The observed small size of the hydrodynamic diameter of TiO2 in solvents of strong acids and bases compared to other solvents may indicate stronger repulsive interactions between nanoparticles than in the case of other systems. Moreover, in the case of salt solutions, the observed large size of the hydrodynamic diameter of TiO2 may be the result of a thicker electrical layer surrounding the particles in the dispersion system.</p>
HeatResilientCity II - work package 2.2: Influence of regional and urban climate on indoor overheating - Results of building performance simulation
<p>This repository contains the <strong>results of the building performance simulations</strong> carried out in the working package 2.2 Influence of regional and urban climate on indoor overheating of the project <a href="http://heatresilientcity.de/">HeatResilientCity II</a>. The buildings under consideration are a multi-residential so-called ‘Gründerzeithaus’ (GZH) and a large-panel construction (LPC) building. The results were extracted for two rooms on the top floor/attic of each building and follow a consistent name convention. Each file contains hourly resolved values for the outdoor air temperature, the indoor air temperature, the indoor operative temperature and the relative humidity indoors and outdoors. Further information can be found in the README of this repository. The simulations were performed for five <strong>different</strong> <strong>regions</strong> in Germany (Dresden, Hamburg, Köln, Stuttgart and Potsdam) for <strong>average present</strong> and <strong>future</strong> <strong>summers</strong> based on meteorological measurement data and under consideration of <strong>urban</strong> <strong>climate</strong>.</p> <p>In addition to the ‘plain’ simulation results, some <strong>heat-indicator variables</strong> were calculated and listed in the files <em>Calculated_Variables.txt</em>. The calculated quantities include temperature-weighted exceedance hours (TWEH) for the limits of 25, 26 and 27 °C (defined in DIN 4108-2:2013 as ‘Übertemperaturgradstunden’) and the maximum operative temperature calculated for the period from April to September.</p> <p>The used <strong>input data</strong> and <strong>building models</strong> can be found in the related repository.</p>
Understanding the Influences of Forest Type, Cover Board Type and Weather on Salamanders
Salamanders are vital bioindicators that function to support a terrestrial forest ecosystem. The continuous loss of amphibian species and their habitat can have profound impacts on terrestrial systems. In terrestrial environments, salamanders use natural cover for refuge, foraging, and maintaining moisture; however, artificial cover has commonly been used to survey and conserve these species. The objective of this study was to assess terrestrial salamander preference for natural versus artificial coverboards in relation to forest stands in two successional stages located within the James H. Barrow Biological Field Station (Hiram, Ohio). Ten artificial (particle board, 30 x 33 cm) and ten natural (white ash, 30 x 30 cm) coverboards were placed in two 50 m parallel transects arranged 2 m apart within transitional and mature forests. Surveys were conducted weekly between the second week of September and the second week of November from 2018 to 2021. Average weakly precipitation and max temperature were recorded. Both abundance and species richness were significantly higher under natural coverboards and in the transitional forest. There were also correlation between species richness and abundance with daily max temperature and weakly precipitation. 678 individuals across five species were found: Eastern Red-Backed Salamander, Spotted Salamander, Four-Toed Salamander, Red-Spotted Newt, and Northern Two-Lined Salamander. Eastern Red-Backed Salamanders were the most abundant species within both mature and transitional forests. Natural coverboards may be a better method to survey terrestrial salamanders because artificial coverboards are comprised of wood chippings, wax and adhesives which may alter soil permeability for less favorable conditions.
Genome size influences plant growth and biodiversity responses to nutrient fertilization in diverse grassland communities
Experiments comparing diploids with polyploids and in single grassland sites show that nitrogen and/or phosphorus availability influences plant growth and community composition dependent on genome size; specifically plants with larger genomes grow faster under nutrient enrichments relative to those with smaller genomes. However, it is unknown if these effects are specific to particular site localities with speciifc plant assemblages, climates, and historical contingencies. To determine the generality of genome size dependent growth responses to nitrogen and phosphorus fertilisation, we combined genome size and species abundance data from 27 coordinated grassland nutrient addition experiments in the Nutrient Network that occur in the Northern Hemisphere across a range of climates and grassland communities. We found that after nitrogen treatment, species with larger genomes generally increased more in cover compared to those with smaller genomes, potentially due to a release from nutrient limitation. Responses were strongest for C3 grasses and in less seasonal, low precipitation environments, indicating that genome size effects on water-use-efficiency modulates genome size-nutrient interactions. Cumulatively the data suggest that genome size is informative and improves predictions of species’ success in grassland communities.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.