Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
8,828
datasets available to search
ShareScore release 0.9.0
Dataset results
8,828 results for “product”
Data for: Increasing plant group productivity through latent genetic variation for cooperation
<p>Historic yield advances in the major crops have to a large extent been achieved by selection for improved productivity of groups of plant individuals such as high-density stands. Research suggests that such improved group productivity depends on “cooperative” traits (e.g., erect leaves, short stems) that – while beneficial to the group – decrease individual fitness under competition. This poses a problem for some traditional breeding approaches, especially when selection occurs at the level of individuals, because “selfish” traits will be selected for and reduce yield in high-density monocultures. One approach, therefore, has been to select individuals based on ideotypes with traits expected to promote group productivity. However, this approach is limited to architectural and physiological traits whose effects on growth and competition are relatively easy to anticipate.</p> <p>Here, we developed a general and simple method for the discovery of alleles promoting cooperation in plant stands. Our method is based on the game-theoretical premise that alleles increasing cooperation benefit the monoculture group but are disadvantageous to the individual when facing non-cooperative neighbors. Testing the approach using the model plant <em>Arabidopsis thaliana</em><em>, </em>we found a major effect locus where the rarer allele was associated with increased cooperation and productivity in high-density stands. The allele likely affects a pleiotropic gene, since we find that it is also associated with reduced root competition but higher resistance against disease. Thus, even though cooperation is considered evolutionarily unstable except under special circumstances, conflicting selective forces acting on a pleiotropic gene might maintain latent genetic variation for cooperation in nature. Such variation, once identified in a crop, could rapidly be leveraged in modern breeding programs and provide efficient routes to increase yields.</p>
Non productive EFAs detection over the Lithuanian pilot region (2021)
<p>In the context of the EU-funded project DIONE (No. 870378), the Super-Resolved Sentinel-2 data were further used to identify small-sized areas that can be characterised of great importance in terms of environmental sustainability, which in the Common Agricultural Policy (CAP) are denoted as Ecological Focus Area (EFA). EFAs are characterised as a portion of farmland area that has to be designed for environmental purposes. For the needs of DIONE, the EFAs regions were identified with the Sentinel-2 & Very High Resolution (VHR) data to be acquired from 01-08-2020 until 31-05-2021 providing tailored information for the needs of the Lithuanian Paying Agency (e.g. NPA).</p> <p><strong>Further Details of the provided EFAs dataset</strong></p> <p>There are only three EFA types present in the dataset given by NPA:</p> <ul> <li><strong>mg0:</strong> Tree group, forest</li> <li><strong>gr0:</strong> Ditch, the canal from 1 m wide</li> <li><strong>ku0:</strong> Pond with coastal vegetation</li> </ul> <p>Due to the nature of the data, the majority of EFA polygons do not contain at least one full Sentinel-2 pixel. To circumvent this issue, the 2.5m resolution output of the multi-temporal SR model is used to produce EFA signals. Using 2.5m resolution, around 20% of FOIs belonging to the <em>"Ditch, canal from 1m wide"</em> class do not contain one full super-resolved pixel at 2.5m resolution. Out of "34157" EFA polygons in the sample area, we have signals for "32732" of them. The majority are missing due to pixelization (~1000 EFA FOIs fully contain less than 1 SR pixel), others are missing due to having no cloud-free observation during the observation period.</p> <p><strong>Details for the model </strong><strong>deployed</strong></p> <p>To classify EFAs an LSTM model is used (same as for crop type classification). The model is trained as a binary classifier using:</p> <ul> <li>LSTM FOIs inside the test area as positive examples</li> <li>Agricultural parcels inside the test area as negative examples</li> </ul> <p>Five models are trained using a 5-fold split to ensure that the results are predicted on data the model has not seen.</p> <p><strong>Results</strong></p> <table> <caption><strong>Overall performance of the models</strong></caption> <thead> <tr> <th scope="col">Accuracy = 91.1</th> </tr> </thead> <tbody> <tr> <td> </td> <td><strong>Precision </strong></td> <td><strong>Recall</strong></td> <td><strong> F1 </strong></td> <td><strong>Count</strong></td> </tr> <tr> <td><strong>EFA</strong></td> <td>92.3 </td> <td>93.2</td> <td>92.8</td> <td>32732</td> </tr> <tr> <td><strong>NOT EFA</strong></td> <td>89.2</td> <td>87.9</td> <td>88.6</td> <td>21005</td> </tr> </tbody> </table> <p>In reality, we are only interested to detect wrongly / fraudulently claimed EFAs - meaning FOIs that are claimed as EFAs and are in reality some kind of agricultural land. The model is less confident in predicting EFAs as EFAs for the <em>"Ditch/Canal"</em> group. This is probably due to the fact that these polygons are long and narrow and the most susceptible to registration errors and shifts which we know are present in the SR data from which the signals were produced.</p> <p>This dataset is comprised of one geopackage file, the <em>"efas-w-results-v0-binary.gpkg", which</em> was computed for the Lithuanian pilot region<em>. </em>Descriptions are given below.</p> <ul> <li><strong>classification</strong>: Whether the model thinks the FOI is an EFA (`EFA`) or not (`NOT_EFA`)</li> <li><strong>classification_score:</strong> the pseudoprobability of the EFA prediction as assigned by the crop-group model <ul> <li> a score close to 1 indicates that the model is very confident in the prediction</li> <li> a score close to 0 indicates that the model is not confident in the prediction</li> </ul> </li> </ul>
Non productive EFAs detection over the Cypriotic pilot region (2021)
<p>In the context of the EU-funded project DIONE (No. 870378), the Super-Resolved Sentinel-2 data were further used to identify small-sized areas that can be characterised of great importance in terms of environmental sustainability, which in the Common Agricultural Policy (CAP) are denoted as Ecological Focus Area (EFA). EFAs are characterised as a portion of farmland area that has to be designed for environmental purposes. For the needs of DIONE, the EFAs regions were identified with the Sentinel-2 & Very High Resolution (VHR) data to be acquired from 01-08-2020 until 25-06-2021 providing tailored information for the needs of the Cypriotic Paying Agency (e.g. CAPO).</p> <p><strong>Further Details of the provided EFAs dataset</strong></p> <p>The EFA polygons were downloaded from the EFA endpoints provided by CAPO.</p> <p>There are three EFA types present in the dataset:</p> <ul> <li><strong>Points: </strong>Trees</li> <li><strong>Lines</strong>: Ditches</li> <li><strong>Polygons</strong>: Productive EFAs - The current layer will not be exploited in the content of the DIONE project, as it is predominately focused on the detection of *non-productive (stable)* EFA elements.</li> </ul> <p>The points and lines had to be buffered to an extent of 5m so that the signals could be downloaded. Because the elements considered are very small and they would not fit into one full Sentinel-2 pixel, signals were downloaded from the 2.5m resolution output of the multi-temporal Super Resolution model. The observation period for EFAs detection is from 01-08-2020 until 25-06-2021. Results are provided for 52691 point polygons and 454 line polygons located in the test area.</p> <p><strong>Details for the model </strong><strong>deployed</strong></p> <p>To classify EFAs an LSTM model is used. The model is trained as a binary classifier using:</p> <ul> <li>Signals from EFA (buffered point and line geometries) FOIs inside the test area as positive examples</li> <li>Signals from agricultural parcels inside the test area as negative examples</li> </ul> <p>Five models are trained using a 5-fold split to ensure that the results are predicted on data the model has not seen.</p> <p><strong>Results</strong></p> <table> <caption><strong>Overall performance of the models</strong></caption> <thead> <tr> <th scope="col">Accuracy = 82.9</th> </tr> </thead> <tbody> <tr> <td> </td> <td><strong>Precision </strong></td> <td><strong>Recall</strong></td> <td><strong> F1 </strong></td> <td><strong>Count</strong></td> </tr> <tr> <td><strong>EFA</strong></td> <td>84.9</td> <td>92.9</td> <td>88.7</td> <td>53008</td> </tr> <tr> <td><strong>NOT EFA</strong></td> <td>74.9</td> <td>56.4</td> <td>64.3</td> <td>19992</td> </tr> </tbody> </table> <p>In reality, we are only interested in one side of the confusion matrix. We want to detect wrongly / fraudulently claimed EFAs - meaning FOIs that are claimed as EFAs and are in reality some kind of agricultural land. In these cases, 93% of the claimed EFAs were confirmed to be EFAs and for 7% of the EFA FOIs, the model disagrees.</p> <p>This dataset is comprised of one geopackage file, the <em>"efas_summary.gpkg", which</em> was computed for the Cypriotic pilot region<em>. </em>Descriptions are given below.</p> <ul> <li> <p><strong>classification: </strong>Whether the model thinks the FOI is an EFA (`EFA`) or not (`NOT_EFA`)</p> </li> <li> <p><strong>classification_score:</strong><strong> </strong>The pseudoprobability of the EFA prediction as assigned by the crop-group mode</p> <ul> <li> <p>a score close to 1 indicates that the model is very confident in the prediction</p> </li> <li> <p>a score close to 0.5 indicates that the model is not confident in the prediction</p> </li> </ul> </li> </ul>
BIOLOGICAL DATA in CO2 budget of cultured mussels metabolism in the highly productive Northwest Iberian upwelling system
<p>BIOLOGICAL DATA to estimate the carbon dioxide budget of cultured mussels metabolism in the highly productive Northwest Iberian upwelling system.</p> <p>Álvarez-Salgado et al. (2022) estimate the carbon dioxide and total alkalinity budgets due to the Mediterranean mussels (Mytilus galloprovicialis) growing in suspended culture in a low seston environment such as the Galician Rías (NW Spain). This database contains the biological data needed to estimate the carbon dioxide fluxes and changes in total alkalinity induced by the different biological processes involved in mussel growth. </p> <p>Manuscript available at: <a href="https://doi.org/10.1016/j.scitotenv.2022.157867">https://doi.org/10.1016/j.scitotenv.2022.157867</a></p> <p>Álvarez-Salgado, X.A., Fernández-Reiriz, M.J., Fuentes-Santos, I., Antelo, L.T., Alonso, A.A., Labarta, U., 2022. CO2 budget of cultured mussels metabolism in the highly productive Northwest Iberian upwelling system. Sci. Total Environ. 849, 157867.</p>
Biochar production paramters and physico-chemical characteristics
<p>Data on biochar production parameters and physico-chemical characteristics collected from the scientific, peer-reviewed literature. Articles published up to June 2021 were found via the Scopus electronic database using search terms "biochar properties" AND "biochar characteristics" in titles, abstracts and keywords. Data were manually extracted from text and tables, but not from figures. Data were curated as follows:</p> <ul> <li>deletion of implossible entries: H:C > 3 and sum of C, O, N, H, S and ash content > 110 weigth%</li> <li>deletion of entries that do not meet criteria to be considered as biochar (HTT < 350 °C)</li> <li>conversion to the unit reported in the database when needed and possible</li> </ul> <p>In addition to the main data table, in order to ease re-use of this dataset for other purposes, a bibliography table is provided with analytical field allowing to sort studies by biochar use case, and production parameter sutdied. Both tables are accompanied by a text read me file that describes each variable.</p>
Life cycle inventories for the article: Circular Battery Production in the EU: Insights from integrating Life Cycle Assessment into System Dynamics Modeling on Recycled Content and Environmental Impacts
<p>This repository provides the unregionalized life cycle inventories to the paper "<span>Ginster, R.</span>, <span>Blömeke, S.</span>, <span>Popien, J. L.</span>, <span>Scheller, C.</span>, <span>Cerdas, F.</span>, <span>Herrmann, C.</span>, & <span>Spengler, T. S.</span> (<span>2024</span>). <span>Circular battery production in the EU: Insights from integrating life cycle assessment into system dynamics modeling on recycled content and environmental impacts</span>. <em>Journal of Industrial Ecology</em>, <span>1</span>–<span>18</span>. <a href="https://doi.org/10.1111/jiec.13527">https://doi.org/10.1111/jiec.13527</a>".</p> <h2>Contents</h2> <p>The repository is split into 2 parts and comprises the following files:</p> <p><strong>01_production: </strong>contains the necessary life cycle inventories for battery production.</p> <ul> <li><strong>01_primary</strong>: contains the life cycle inventories for battery production from primary materials.</li> <li><strong>02_secondary</strong>: contains the life cycle inventories for battery production from secondary materials.</li> <li><strong>03_active_material</strong>: contains the life cycle inventories for the active battery materials from primary materials.</li> <li><strong>04_active_material</strong>: contains the life cycle inventories for the active battery materials from secondary materials.</li> </ul> <p> </p> <p><strong>02_recycling: </strong>contains the necessary inventories for battery recycling.</p> <ul> <li><strong>01_process</strong>: contains the life cycle inventories for battery recycling.</li> <li><strong>02_intermediate</strong>: contains the life cycle inventories for the intermediate system for battery recycling.</li> <li><strong>03_output</strong>: contains the life cycle inventories for the resulting substances from battery recycling.</li> </ul> <h2>Summary</h2> <p>These files allow to reproduce the results of our study. Each file contains the life cycle inventory of one distinct battery capacity (20, 45, 68, 85, 95, 100 kWh) with a specific cell chemistry (LFP, NCA, NMC333, NMC532, NMC622, NMC811, NMC955) for battery production (based on Knehr et al. 2022) or for battery recycling (based on Blömeke et al. 2023).</p> <h2>Related publication</h2> <p>More details on the scientific context is provided in the publication itself:</p> <p><span>Ginster, R.</span>, <span>Blömeke, S.</span>, <span>Popien, J. L.</span>, <span>Scheller, C.</span>, <span>Cerdas, F.</span>, <span>Herrmann, C.</span>, & <span>Spengler, T. S.</span> (<span>2024</span>). <span>Circular battery production in the EU: Insights from integrating life cycle assessment into system dynamics modeling on recycled content and environmental impacts</span>. <em>Journal of Industrial Ecology</em>, <span>1</span>–<span>18</span>. <a href="https://doi.org/10.1111/jiec.13527">https://doi.org/10.1111/jiec.13527</a></p> <h2>Funding</h2> <p>This publication (Raphael Ginster and Steffen Blömeke) was created within the Research Training Group CircularLIB, supported by the Ministry of Science and Culture of Lower Saxony with funds from the program zukunft.niedersachsen of the Volkswagen Foundation (MWK | ZN3678).</p> <p>The publication on which this dataset is based were funded by the German Federal Ministry of Education and Research within the Competence Cluster Recycling & Green Battery (greenBatt) under the grant numbers 03XP0302A (Christian Scheller) and 03XP0331A (Jan-Linus Popien). The authors are responsible for the contents of this publication.</p>
Barley as a production platform for oral vaccines in sustainable fish aquaculture
<p>Experimental data for the study "Barley as a production platform for oral vaccines in sustainable fish aquaculture"</p>
X-Shooting ULLYSES: Massive Stars at low metallicity - II. DR1: Advanced optical data products for the Magellanic Clouds
<p>Xshooter optical spectroscopic data of Magellanic Clouds targets observed by the ESO Large Program X-Shooting ULLYSES: Massive Stars at low metallicity (PI: Vink; Porgram ID: 106.2011Z). <br><br>This version is identical to the previous version but includes the LMC and SMC atlases and the static calibration files with the new flux models (all arms) and spline anchor points (only UVB).</p>
Natural Products Atlas (NPAtlas) MetFrag Local CSV
<p>This is a local CSV file of the Natural Products Atlas (NPAtlas, <a href="https://www.npatlas.org/joomla/">https://www.npatlas.org/joomla/</a>) for MetFrag (<a href="https://msbi.ipb-halle.de/MetFrag/">https://msbi.ipb-halle.de/MetFrag/</a>).</p> <p>Data was extracted to CSV from the TSV download from the NPAtlas <a href="https://www.npatlas.org/download">website</a>, with column headers for compulsory fields adjusted to fit the MetFrag format. Several entries with charged formulas (one +3, 7 +2, 125 +, 6 negative) had the charges removed from the formula to produce results consistent with other MetFrag files (where neutral formula is required; no adjustment for +/-H was performed so these remained consistent with the mass entries with minimum manipulation). Several overflowing lines were removed (due to new metadata) and NPA023832 was removed as "Ho" is not recognised by MetFrag. </p> <p>This file is for users wanting to integrate the latest NPAtlas into MetFrag CL workflows (offline), this file will be integrated into MetFrag online; please use the file in the dropdown menu rather than uploading this one.</p> <p>Please credit the data source in any use of this file as the licence is CC-BY - details at <a href="https://www.npatlas.org/">https://www.npatlas.org/</a></p>
MOD17A2H version 6 Gross Primary Productivity (GPP) global mosaics at 500 m resolution and difference 2000-2017
<p>MOD17A2H version 6 Gross Primary Productivity (GPP) global mosaics at 500 m resolution and difference in GPP for the period 2000-2017. Changes in GPP could be used to estimate land degradation or similar. Derived using <a href="https://gitlab.com/openlandmap/global-layers/tree/master/input_layers/MOD17A2H">the data.table package and quantile function in R</a>. For more info about the MODIS LST product see: https://lpdaac.usgs.gov/dataset_discovery/modis/modis_products_table/mod17a2h_v006. Antartica is not included.</p> <p>If you discover a bug, artifact or inconsistency in the maps, or if you have a question please use some of the following channels:</p> <ul> <li>Technical issues and questions about the code: <a href="https://gitlab.com/openlandmap/global-layers/issues">https://gitlab.com/openlandmap/global-layers/issues</a> </li> <li>General questions and comments: <a href="https://disqus.com/home/forums/landgis/">https://disqus.com/home/forums/landgis/</a></li> </ul> <p>All files internally compressed using "COMPRESS=DEFLATE" creation option in GDAL. File naming convention:</p> <ul> <li>veg = theme: vegetation,</li> <li>gpp = variable: gross primary productivity in kg C m<sup>2</sup>,</li> <li>mod17a2h.oct = determination method: MOD17A2H product, GPP values for October,</li> <li>d = median value / difference = difference between periods / u.975 = aggregation/statistics method: 97.5% probability upper quantile,</li> <li>500m = spatial resolution / block support: 500 m,</li> <li>s0..0cm = vertical reference: land surface,</li> <li>2000..2017 = time reference: from 2000 to 2017,</li> <li>v1.0 = version number: 1.0,</li> </ul>
Datasets for paper 'Cabello, V., Renner, A., Giampietro, M. 2019. Relational analysis of the resource nexus in arid land crop production. Advances in Water Resources 130:258-629'
<p>Datasets produced for the paper Cabello, V., Renner, A., Giampietro, M. 2019.<em> </em>Relational analysis of the resource nexus in arid land crop production. <em>Advances in Water Resources </em>130:258-269</p>
Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) at 250 m monthly for period 2014-2019 based on COPERNICUS land products
<p>Long-term monthly Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) median value at 250 m based on the time-series of <a href="https://land.copernicus.eu/global/products/fapar">COPERNICUS FAPAR</a>. Derived using the data.table package and quantile function in R. Processing steps are available <a href="https://gitlab.com/openlandmap/global-layers/tree/master/input_layers/Copernicus_vito"><strong>here</strong></a>. Antartica is not included.</p> <p>To access and visualize maps use: <a href="http://www.openlandmap.org/">OpenLandMap.org</a></p> <p>If you discover a bug, artifact or inconsistency in the LandGIS maps, or if you have a question please use some of the following channels:</p> <ul> <li>Technical issues and questions about the code: <a href="https://gitlab.com/openlandmap/global-layers/issues">https://gitlab.com/openlandmap/global-layers/issues</a> </li> <li>General questions and comments: <a href="https://disqus.com/home/forums/landgis/">https://disqus.com/home/forums/landgis/</a></li> </ul> <p>All files internally compressed using "COMPRESS=DEFLATE" creation option in GDAL. File naming convention:</p> <ul> <li>veg = theme: vegetation,</li> <li>fapar = Fraction of Absorbed Photosynthetically Active Radiation,</li> <li>proba.v.oct = determination method: PROBA-V products, month October,</li> <li>d = median value,</li> <li>250m = spatial resolution / block support: 250 m,</li> <li>s0..0cm = vertical reference: land surface,</li> <li>2014..2019 = time reference: from 2014 to 2019,</li> <li>v1.0 = version number: 1.0,</li> </ul>
Data sets for "Magnetic helicity dissipation and production in an ideal MHD code"
<pre>The tar archive Helicity_in_IdealMHDCode.tar contains an index.html file with links to a directory with "Add-ons" to the FLASH code and the flash.par file. We also list the IDL directory with secondary data and plot routines for each figure used in the paper "Magnetic helicity dissipation and production in an ideal MHD code" by Axel Brandenburg (Nordita) and Evan Scannapiecoo (Arizona State University) with the URL https://arxiv.org/abs/1910.06074.</pre>
S59 | NPINESCT | Natural Product Insecticides
<p>This is the collection associated with list S59 NPINSECT on the NORMAN Suspect List Exchange.</p> <p><a href="https://www.norman-network.com/nds/SLE/">https://www.norman-network.com/nds/SLE/</a></p> <p>A list of 83 naturally occurring insecticides curated and provided by Reza Aalizadeh (University of Athens).</p> <p>Update 19 Nov 2019: modified CAS numbers for methyl salicylate, replaced "Benzaldehyde" with IUPAC name and changed Evonine to "Euonymine" based on feedback via Twitter.</p> <p> </p>
High-level Data Products for NEID Solar Observations (January 1, 2021 - June 30, 2024)
<p>High-level data products derived from Sun-as-a-star observations by the NEID Solar Telescope at WIYN Observatory, spanning January 1, 2021 through June 30, 2024. We identify 117,060 observations which are unlikely to be significantly affected by weather, hardware or major calibration issues. This repository provides several high-level data products to the community to aid in the interpretation and inter comparisons of NEID solar observations. These include individual radial velocities (RV) measurements from the Penn State Research Pipeline, RVs binned over solar oscillation timescales, and daily-binned RVs, activity indicators, and cross correlation functions, as well as estimated corrections for differential extinction and the apparent solar rotation velocity. For additional information, see the manscript, "Earths within Reach: Evaluation of Strategies for Mitigating Solar Variability using 3.5 years of NEID Sun-as-a-Star Observations". </p>
Production data at HS6 level from Solleder, Silvy, and Olarreaga (2024)
<p><strong>Description</strong></p> <p>This dataset contains the data from the paper "Protection for sale without aggregation bias" (Solleder, Silvy, and Olarreaga, 2024).</p> <p>Production data indicated by "Estimates" in the source field of the dataset were estimated using the Regression-Enhanced Random Forest (RERF) algorithm developed by Zhang et al. (2017). It allows us to predict production data trained and tested on the Prodcom dataset, containing mainly European countries, for which production data is available at a high level of disaggregation with a correspondence to the HS six-digit classification. For more information on the procedure, please take a look at Solleder, Silvy, and Olarreaga (2024).</p> <p>Production data indicated by "FAO" in the source field of the dataset is sourced from FAO and has been converted by the authors to 6-digit HS codes.</p> <p>The <em>dta </em>file has been created with STATA 17. The <em>csv</em> file is a comma-separated value file. The separator is ',', and the first row is variable names. The content is the same in both files. Variables are:</p> <ul> <li><em>country</em>: ISO 3166 3-character country codes, string; </li> <li><em>year</em>: years (1999-2015), numeric;</li> <li><em>commoditycode</em>: product 6-digit HS codes in HS revision 1992 (H0), numeric;</li> <li><em>production</em>: production in country - year in 1000 USD, numeric;</li> <li><em>source</em>: "Estimates" / "FAO" (see above) </li> </ul> <p><strong>References</strong></p> <p>Solleder, J, F Silvy and M Olarreaga, 2024. Protection for sale without aggregation bias, CEPR Discussion Paper No. 19418. CEPR Press, Paris & London. <a href="https://cepr.org/publications/dp19418">https://cepr.org/publications/dp19418</a></p> <p>Zhang, Haozhe, Dan Nettleton and Zhengyuan Zhu, 2017. Regression-Enhanced Random Forests. JSM Proceedings, Section on Statistical Learning and Data Science, Alexandria, 636-647. <a href="https://doi.org/10.48550/arXiv.1904.10416" target="_blank" rel="noopener">https://doi.org/10.48550/arXiv.1904.10416</a></p>
sOCEL 2.0: A Sustainability-Enriched OCEL of a Hinge Production Process
<h2><strong>General Description</strong></h2> <p>The simulated process describes the production of hinges. It begins with a steel coil which is split into steel sheets which are heated, formed and coated before being split into the male and female parts. Subsequently, both components are assembled with a steel pin and packed. The process is describes using events and objects</p> <p>This is an artificial event log according to the <a href="https://www.ocel-standard.org/">OCEL 2.0 Standard</a> defined in Berti et al. simulated using an extended version of CPN-Tools with a connector to climatiq API. The extension to CPN-Tools and the event log simulation are results of the Bachelor Thesis project of Marco Heinisch at the Chair for Process and Data Science at RWTH Aachen University. </p> <h2><strong>Process Overview</strong></h2> <p>In this example scenario, hinges are produced in a German facility. The production process is divided into three workstations, all supervised by a single worker. The production line is started by this employee workstations for workstations every morning at 7:30. The employee pauses work for a lunch break at 12:00 pm and then continues working from 1:00 pm until 3:00 pm. The production process starts with two primary inputs: steel coils and steel pins. The steel pins, also known as steel rods, are each 3.0 cm long and are used to hold the leaves together. The steel coils hold a rolled steel strip that is approximately 0.3 centimeters thick and 3.0 centimeters wide. This steel strip is then processed into hinge leaves through the following steps.</p> <p>In the first operation of our model, one steel coil at a time is processed at the first workstation. Each coil is continuously cut into steel sheets that are 3 cm in length. As these strips are cut, we assign each resulting steel sheet an identification number. This process continues until there is only an unusable steel remainder of the steel coil, which we do not track further in this process. This remainder needs to be classified as waste in preprocessing. The amount of waste created during the production of rolled steel strips varies depending on the initial length and could be optimized. The cut steel sheets are handled in a line and heat-treated in a gas oven. A different oven technology could reduce impacts. Then, each 3.0 cm steel sheet is rolled on one side to form a barrel for the insertion of hinge pins. This operation is performed using a hydraulic press powered by electricity. In our model, we refer to these produced parts as FormedParts. Finally, in a very energy intense step, plasma coating is conducted using a specialized machine. The FormedParts are automatically collected in a transport carriage. If the carriage reaches full capacity, an alert signals the operator to manually move the batch of FormedParts to the second workstation.</p> <p>At the second workstation, <em>FormedParts </em>are shaped into alternating male and female hinge leaves (MalePart and FemalePart) using a laser cutting machine. This is achieved<br>by cutting out specific sections from each part. Notably, the method generates more waste compared to an alternative process where the male and female parts are directly cut out from the coil and then shaped further. The metal waste containing the coat is hypothetically not recyclable, which is reflected in a separate impact indicator. The waste created during this operation is not recorded, however, the weight of the workpiece object before and after the material removal is recorded. </p> <p>In the next step, the worker manually checks both FemalePart and MalePart for quality criteria, which is mass, representing various possible measurable attributes, including geometrics and material properties. If everything is within tolerance, the parts are placed on a moving band to the third workstation. If not, the part represents waste, which again is to be quantified in a preprocessing step. At the next station, an assembling machine uses one MalePart, one FemalePart, and one SteelPin to create a Hinge. The material origin of a hinge or its parts could potentially be discovered. A set of 10 hinges is automatically buffered and placed into a cardboard box by a packaging machine.</p> <h3><strong>Sustainability Data</strong></h3> <p>The event log is enhanced with sustainability-related attributes for objects and events. These attributes can be identified by their naming structure as they begin with either i, p or s and include a unit in square brackets at the end of the attribute name structure, i.e., "i_electricity[kWh]". These additional attribute are classifies into three different categories of data:</p> <ul> <li><strong>Impact Indicators</strong> ("i_"): contain information on all different impacts caused by an event, object, or process. Impact Indicators should be based on some sort of sustainability framework, such as <a href="https://link.springer.com/article/10.1007/s11367-016-1246-y">ReCiPe2016 standard</a>. In this event log, all relevant impact indicators considered in reviewed literature on manufacturing assessments are included according to the Climatiq-API specification to show the potential of automated assessment. Indicators further represent LCI-Items according to the LCA standard. However, to both indicate their relevance and a possible inability to get this data from the process directly some of the values read "??" as they have to be estimated using given impact paqrameters.</li> <li><strong>Impact Parameters </strong>("p_"): As data availability issues may lead to an inavailability to determine impact indicators directly, impact parameters can be included into the event log to support the estimation of impact indicators. These process-specific parameters include, e.g., material, mass, volume, geometric properties, and operation duration.</li> <li><strong>Impact Scores</strong> ("s_"): Impact scores describe the overall effect of a system or event on the environment in a standardised manner. Multiple impact scores for different impact categories, such as climate change or toxicity, can be calculated and represented as impact scores. This process involves aggregating and weighting individual impact indicators according to a standardized methodology, such as ReCiPe2016. Climatic API (used for the simulation of the event log) uses values for impact indicators to return impact scores. </li> </ul> <h2><strong>General Properties </strong></h2> <p>An overview of log properties is given below.</p> <table> <tbody> <tr> <th>Property</th> <th>Value</th> </tr> </tbody> <tbody> <tr> <td>Event Types</td> <td>11</td> </tr> <tr> <td>Object Types</td> <td>12</td> </tr> <tr> <td>Events</td> <td>~3850</td> </tr> <tr> <td>Objects</td> <td>~23700</td> </tr> </tbody> </table> <h2><strong>Process Simulation Design Process</strong></h2> <p>Our result is a simplified hinge production line, modeled as a Colored Petri Net (CPN) in <a href="https://cpntools.org/">CPN Tools</a>, a tool for editing and creating colored Petri nets. This model is an idealized representation of an exemplary manufacturing process. It is designed to examine and present the use case of SD in OCPM and does not realistically represent a specific manufacturing process in detail.</p> <p>The model’s design process was structured into four steps. First, the workpiece flow was outlined, identifying the sub-products used in hinge production.<br>Next, control flow elements were incorporated, adding batching and queuing behaviors as well as quality control procedures. Sustainability data relevant to this example were integrated into events and objects following the sOCEL specification. Finally, the simulation of values such as waiting times and weights now includes randomness and deviations.</p> <h2><strong><br>Simulation Model </strong></h2> <p>The repository with the CPN-Tools model as well as the CPN-Tools extension including the connector to Climatiq API can be found in the following Repositiry: <a href="https://github.com/rwth-pads/sOCEL">https://github.com/rwth-pads/sOCEL</a></p> <p>Further information on the simulated process, the simulation model and the CPN-Tools extension can be found in <a href="https://www.pads.rwth-aachen.de/go/id/bhsfqz" target="_blank" rel="noopener">Marco's thesis</a> entitled "Integrating Sustainability Data into Event Logs for Object-Centric Process Mining".</p> <h2><strong>Acknowledgements</strong></h2> <p>Funded under the Excellence Strategy of the Federal Government and the Länder<em>. </em>Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy - EXC-2023 Internet of Production - 390621612. We also thank the Alexander von Humboldt (AvH) Stiftung for supporting our research.</p> <p>Special thanks are also dedicated to Marco's Family and friends Lennart, Franziska, and Maxim for their support and valuable feedback.</p>
ForestAge-Constrained Eddy-Covariance Gridded NEP Product
<p><strong>Description</strong></p> <p>This repository holds global spatial estimates of the Net Ecosystem Productivity of forests (NEP), circa 2010, for a grid spacing of 0.5° by 0.5º pixel size. Three different approaches were used to create the maps.</p> <ol> <li> <p><strong>Model M1 (Regional Age–NEP Relationships Per Biome)</strong>: This model scales site-level NEP observations to a global gridded field using biome-specific NEP-age curves and site-level anomalies. The random forest model (RF1) is trained on forest age, GPP, temperature, and nitrogen deposition, producing NEP anomalies that reflect site-specific deviations from biome-wide trends. Gridded predictor fields of forest age, GPP, temperature (MAT), and nitrogen deposition are used to create 0.5° by 0.5° NEP grids, with uncertainties estimated using an ensemble of 180 members. The data from Model M1 can be investigated from the ForestAge_EC_NEP_M1_v1.0.nc file.</p> </li> <li> <p><strong>Model M2 (Global Age–NEP Relationship)</strong>: This model uses a random forest algorithm (RF2) to upscale NEP observations but applies a global NEP-age relationship across all sites. It uses the same gridded predictor fields as M1—forest age, GPP, MAT, and nitrogen deposition—but the age–NEP relationship is determined globally. Uncertainty is calculated similarly to M1, using ensembles of model parameters and predictor fields. The data from Model M2 can be investigated from the ForestAge_EC_NEP_M2_v1.0.nc file.</p> </li> <li> <p><strong>Model M3 (Without Age Consideration)</strong>: This model predicts NEP solely based on GPP, MAT, and nitrogen deposition without accounting for forest age. It follows a similar approach to RF3 models from previous work and uses the same gridded predictors and uncertainty estimation methods as M1 and M2. The data from Model M3 can be investigated from the ForestAge_EC_NEP_M3_v1.0.nc file.</p> </li> </ol> <p>The variation across each model's members can assess the uncertainty in each model, which represents uncertainty caused by input variables and the k-fold cross-validation approach. </p> <p>More details about the methodologies behind the three approaches can be found in Ciais, P., Yao, Y. Besnard, S. et al. (2024) (see reference below).</p> <p><strong>Data structure</strong></p> <p>The datasets are stored in <strong>NetCDF format</strong> with a structure consistent across the different models (M1, M2, M3). Each file contains multiple variables representing components of the Net Ecosystem Production (NEP) estimates, such as the mean NEP and its quantiles. The primary variables are:</p> <ul> <li><strong>NEP_MX_mean</strong>: The mean estimate of NEP for each model (M1, M2, M3), with units of grams of carbon per square meter per year (gC m⁻² year⁻¹).</li> <li><strong>NEP_MX_quantiles</strong>: Estimates of NEP at different quantiles, providing uncertainty ranges. The quantiles represented in the data are: [0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75]<br> <div> </div> </li> <li><strong>Members dimension</strong>: Each model includes a <strong>members</strong> dimension, representing several NEP estimates generated using different ensemble members. These members capture uncertainty from input variables such as GPP, temperature, nitrogen deposition, and forest age. The members dimension provides users with multiple realizations of NEP estimates, reflecting the variability these factors introduce.</li> </ul> <p>Coordinates include latitude and longitude with CRS information (EPSG:4326). Missing data values are represented by <strong>-9999</strong>.</p> <p><strong>Citation</strong></p> <p>When using the maps, please cite the dataset, including the version number and the following paper: Ciais, P., Yao, Y. Besnard, S. et al. (2024) The global carbon balance of forests based on flux towers and forest age data, <em>submitted</em>. </p> <p><strong>Version History</strong></p> <ul> <li>1.0 - Initial version, covering 2010</li> </ul>
Kingdom of Saudi Arabia. al-Ḥasāʾ, Jabal al-Qāra (جَبَل ٱلْقَارَة). Pottery production, kiln in operation, 1970.
<p>[KSA QAR 1970.13] Kingdom of Saudi Arabia. al-Ḥasāʾ, Jabal al-Qāra. Pottery production, kiln in operation, 1970.</p>
Portuguese Live Fuel Moisture Content product
<p>This product contains a 2500m LFMC 8-day LFMC between 2017 and 2024 over the continental Portugal.<br><br>Metadata:</p> <p>Number of rows: 180<br>Number of columns: 240<br>Cell size: 0.025<br>File Format: netCDF4<br>Coordinate Reference System: GCS_WGS_1984 - EPSG 4326</p> <p>Files:</p> <ul> <li>LFMC_count - number of valid images for the entire period.</li> <li>LFMC_value - LFMC values product </li> </ul> <p>Fundings:</p> <p>Filippe Santos was supported by the Portuguese Foundation for Science and Technology, I.P (Grant 2022.11960.BD).<br>This research was funded by national funds through FCT-Foundation for Science and Technology, I.P. under the PyroC.pt project (Refs. PCIF/MPG/0175/2019), ICT project (Refs. UIDB/04683/2020 and UIDP/04683/2020). This research was co-funded by the European Union through the European Regional Development Fund (FEDER) in the framework of the Interreg VI-A España-Portugal (POCTEP) 2021-2027, FIREPOCTEP+ (0139_FIREPOCTEP_MAS_6_E).</p> <p> </p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.