Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

1,564

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

1,564 results for “Skull”

Learn how ShareScore rates datasets ↗
zenodo28/100

FIG. 4 in A skull of Machairodus Kaup, 1833 (Felidae, Mammalia) from the late Miocene of Hadjidimovo (Bulgaria), and its place in the evolution of the genus

FIG. 4. — Scatterplot of upper canine length vs width in Machairodus Kaup, 1833 and Homotherium Fabrini, 1890 (blue and purple dots), in mm. In all scatterplots, the line joins the minimum, mean, and maximum values of Batallones-1 (Antón et al. 2004). Additional data from: Ballésio 1963; Beaumont 1975, 1988; Bonis 1976, 1994; Chang 1957; Collings 1972; Ficcarelli 1979; Geraads et al. 2004; Ginsburg et al. 1981; Hendey 1974; Kurtén 1978; Madurell-Malapeira et al. 2014; Melentis 1967; Monescillo et al. 2014; Morlo & Semenov 2004; Pei 1934; Qiu et al. 2004, 2008; Roussiakis & Theodorou 2003; Sardella & Iurino 2012; Scharapov 1996; Schmidt-Kittler 1976; Senyürek 1957; Sotnikova 1992; Spassov et al. 2018; Teilhard 1939; Vekua 1972; Zdansky 1924, and personal measurements.

opencc-zeroApr 2020View details →
zenodo28/100

FIG. 11 in A skull of Machairodus Kaup, 1833 (Felidae, Mammalia) from the late Miocene of Hadjidimovo (Bulgaria), and its place in the evolution of the genus

FIG. 11. — Scatterplot of p4 length vs m1 length. Data as for Figures 4 to 9, plus: Werdelin & Lewis 2013; Monguillon-Douillet 2000.

opencc-zeroApr 2020View details →
zenodo28/100

FIG. 2 in A skull of Machairodus Kaup, 1833 (Felidae, Mammalia) from the late Miocene of Hadjidimovo (Bulgaria), and its place in the evolution of the genus

FIG. 2. — Orientation of the orbits in HD-9196 and LCTF. The values (in degrees) are those of the dihedral angle between the planes of the left and right orbits, defined by plotting the lowermost, uppermost, and anteriormost points of each orbit in space (this slightly differs from twice the convergence angle of Casares- Hidalgo et al. 2019, who used the most posterior point of orbit instead of the lowermost one). Although the accuracy is only moderate because these points are not very precisely defined, the general picture clearly shows less frontally oriented orbits in Machairodus Kaup, 1833 than in most LCTF. Dinofelis Zdansky, 1924 is an estimate for a cast of D. cristata (Falconer & Cautley, 1836), NHMUK M32148.

opencc-zeroApr 2020View details →
zenodo28/100

FIG. 5 in Description of a new species of Cynodictis Bravard & Pomel, 1850 (Carnivora, Mammalia) from the Quercy Phosphorites with comments on the use of skull morphology for phylogenetics

FIG. 5. — Cranium of Cynodictis exilis Teilhard de Chardin, 1915 (MNHN.F.Qu unnumbered) in dorsal view (A), lateral view (B) and ventral view (C). Abbreviations: bo, basioccipital; bs, basisphenoid; ce, carnassial embrasure pit; csm, crista supramastoideus; enp, entopterygoid process; eo, exoccipital; fm, foramen magnum; fr, frontal; gf, glenoid fossa; lac, lacrimal; lacf, lacrimal foramen; M1, upper first molar; mp, mastoid process; mx, maxillary; nc, nuchal crest; oc, occipital condyle; P3, upper third premolar; P4, upper ultimate premolar; pa, parietal; pal, palatine; pgp, postglenoid process; pop, postorbital process of frontal; pp, paroccipital process; pr, promontorium of petrosal; pt, pterygoid; ptp, posttympanic process of squamosal; rt, foramen for ramus temporalis; sc, sagittal crest; sq, squamosal; tc, temporal crest; zpmx, zygomatic process of maxillary; zpsq, zygomatic process of squamosal. Scale bar: 10 mm.

opencc-zeroJun 2020View details →
zenodo28/100

FIG. 3 in Description of a new species of Cynodictis Bravard & Pomel, 1850 (Carnivora, Mammalia) from the Quercy Phosphorites with comments on the use of skull morphology for phylogenetics

FIG. 3. — Right basicranium of Cynodictis peignei n. sp., MNHN.F.Qu9008, in ventral view. Abbreviations: acf, aperture of cochlear fossula; acrf, facet for anterior crus of ectotympanic; ats, sulcus for auditory tube; bo, basioccipital; bs, basisphenoid; cef, facet for caudal entotympanic; ci, crista interfenestralis; dpn, foramen for deep petrosal nerve; eam, roof of external acoustic meatus; eo, exoccipital; er, epitympanic recess; fv, fenestra vestibuli; hf, hypoglossal foramen; jf, jugular foramen; mhf, facet for mallear hook of rostral process; mp, mastoid process; ms, mastoid shelf; oc, occipital condyle; pcrf, facet for posterior crus of ectotympanic; pf, piriform fenestra; pgf, postglenoid foramen; pgp, postglenoid process; pp, paroccipital process; pr, promontorium; ptp, posttympanic process of squamosal; rtpp, rostral tympanic process of petrosal; sf, stapedius fossa; sq, squamosal; tpbs, tympanic process of basisphenoid; ttf, tensor tympani fossa. Scale bar: 10 mm.

opencc-zeroJun 2020View details →
zenodo28/100

FIG. 1 in Description of a new species of Cynodictis Bravard & Pomel, 1850 (Carnivora, Mammalia) from the Quercy Phosphorites with comments on the use of skull morphology for phylogenetics

FIG. 1. — Schematic representation of cranial measurements on the dog cranium (Canis lupus, modified from Evans 1993) in lateral (top) and ventral (bottom) views. These measurements were taken on the cranium of each specimen of Cynodictis Bravard & Pomel, 1850 studied here. The length of the snout is measured from the anterior edge of the orbit to the anterior of the canine. The width is measured from the anterior edge of one P4 to the other. The height is measured from the frontal-nasal junction on the midline to the palatine. The length of the neurocranium is measured from the inner-most edge of the temporal fossa to the maximum posterior point in strict lateral view. The width is measured between the supramastoid crista processes. The height is measured from the dorsal-most point to the ventral-most point. The total length of the cranium, as well as the length from the occiput to the orbit are also measured. Abbreviations: H, height; L, length; N, neurocranium; OoL, occiput to orbit length; S, snout; SKL, skull length; W, width.

opencc-zeroJun 2020View details →
zenodo28/100

FIG. 6 in Description of a new species of Cynodictis Bravard & Pomel, 1850 (Carnivora, Mammalia) from the Quercy Phosphorites with comments on the use of skull morphology for phylogenetics

FIG. 6. — Cranium of Cynodictis lacustris Gervais, 1852 (MNHN.F.Qu17502) in dorsal view (A), lateral view (B) and ventral view (C). Abbreviations: bo, basioccipital; bs, basisphenoid; ce, carnassial embrasure pit; csm, crista supramastoideus; enp, entopterygoid process; eo, exoccipital; fm, foramen magnum; fr, frontal; iof, infraorbital foramen; ju, jugal; lac, lacrimal; lacf, lacrimal foramen; mpfr, maxillary process of frontal; mp, mastoid process; mx, maxillary; na, nasal; nc, nuchal crest; oc, occipital condyle; P1, upper first premolar; P2, upper second premolar; P3, upper third premolar; P4, upper ultimate premolar; pa, parietal; pal, palatine; pgp, postglenoid process; pop, postorbital process of frontal; pp, paroccipital process; pr, promontorium of petrosal; ps, presphenoid; pt, pterygoid; ptp, posttympanic process of squamosal; rt, foramen for ramus temporalis; sc, sagittal crest; sq, squamosal; tc, temporal crest; zpmx, zygomatic process of maxillary; zpsq, zygomatic process of squamosal. Scale bar: 10 mm.

opencc-zeroJun 2020View details →
zenodo28/100

FIG. 4 in Description of a new species of Cynodictis Bravard & Pomel, 1850 (Carnivora, Mammalia) from the Quercy Phosphorites with comments on the use of skull morphology for phylogenetics

FIG. 4. — Upper left dentition of Cynodictis peignei n. sp. (MNHN.F.Qu9007): A, I3-M1 in labial view; B, I1-M1 in occlusal view. Abbreviations: C, canine; I1, first incisor; I2, second incisor; I3, third incisor; M1, first molar; P1, upper first premolar; P2, upper second premolar; P3, upper third premolar; P4, upper ultimate premolar. Scale bar: 10 mm.

opencc-zeroJun 2020View details →
zenodo28/100

Supplementary data for "The craniomandibular anatomy of the early archosauriform Euparkeria capensis and the dawn of the archosaur skull"

<p>Supplementary material for &quot;The craniomandibular anatomy of the early archosauriform<br> Euparkeria capensis and the dawn of the archosaur skull&quot;</p> <p>Contains:</p> <p>-3D surface model of skull of SAM-PK-5867</p> <p>-3D surface renderings of CT scans of SAM-PK-5867, SAM-PK-6047A, UMZC T.692a</p> <p>-CT data for UMZC T.692a</p> <p>-Photograph bank</p>

opencc-by-4.0Jun 2020View details →
zenodo28/100

Dependence of Skull Surface Wave Propagation on Coupling Methods under Bone Conduction: Support material

<p><strong>Objectives:</strong> This study is aimed at the quantitative investigation of skull bone surface wave propagation dependence on different coupling methods of the bone conduction hearing aid (BCHA).&nbsp;<strong>Design:</strong> Experiments were conducted on five&nbsp;Thiel&nbsp;embalmed whole head cadaver specimens. The electromagnetic actuators from a commercial BCHA (Baha&reg; Cordelle and Power) were used to provide stepped sine stimulus in the range of 0.1-10 kHz. Osseous pathways were sequentially activated by a BCHA mounted on a 5-Newton steel headband on Mastoid, on a percutaneously implanted screw (Baha&reg; Connect), and transcutaneously with a Baha&reg; Attract at bone anchored hearing aid (BAHA) location.&nbsp; Surface motion was quantified by sequentially measuring ~200 points on the skull surface via a three-dimensional laser Doppler vibrometer (3D LDV) system. <strong>Results:</strong> The stimulation area undergoes deformations at a lower frequency range than the whole head does (less than 500Hz versus more than 1 kHz). Stiffer coupling (Connect versus Headband) appears to lead to earlier onset and faster transition, with frequency, to local deformations and wave motion. <strong>Conclusion:</strong> For stimulation with the headband at the mastoid, the sound wave travelling across the head does not exactly origin from the site of&nbsp; stimulation. Potentially, because the skull vibration is influenced by the dynamic mechanical properties of skull plates.</p>

opencc-by-4.0Oct 2020View details →
zenodo28/100

FIG. 10 in The skull on the hill. Anthropological and osteological investigation of contemporary horse skull ritual practices in central Mongolia (Arkhangai province)

FIG. 10. — Structure and repositories associated with the great "foal" ovoo: A, central ovoo and small stone cairns stretching out towards the south; B, old male horse skull; C, 10 to 11-year-old male horse skull; D, 15 to 18-year-old male horse skull; E, old male horse skull wrapped in a khadag; F, central ovoo with its altar.

opencc-by-4.0Dec 2017View details →
zenodo28/100

FIG. 7. — A in The skull on the hill. Anthropological and osteological investigation of contemporary horse skull ritual practices in central Mongolia (Arkhangai province)

FIG. 7. — A, Small ovoo with horse skulls at the top of a hill; B, bigger ovoo including wooden sticks.

opencc-by-4.0Dec 2017View details →
dryad28/100

Data from: Pervasive genetic integration directs the evolution of human skull shape

It has long been unclear whether the different derived cranial traits of modern humans evolved independently in response to separate selection pressures or whether they resulted from the inherent morphological integration throughout the skull. In a novel approach to this issue, we combine evolutionary quantitative genetics and geometric morphometrics to analyze genetic and phenotypic integration in human skull shape. We measured human skulls in the ossuary of Hallstatt (Austria), which offer a unique opportunity because they are associated with genealogical data. Our results indicate pronounced covariation of traits throughout the skull. Separate simulations of selection for localized shape changes corresponding to some of the principal derived characters of modern human skulls produced outcomes that were similar to each other and involved a joint response in all of these traits. The data for both genetic and phenotypic shape variation were not consistent with the hypothesis that the face, cranial base and cranial vault are completely independent modules but relatively strongly integrated structures. These results indicate pervasive integration in the human skull and suggest a reinterpretation of the selective scenario for human evolution where the origin of any one of the derived characters may have facilitated the evolution of the others.

opencc-zeroDec 2010View details →
dryad28/100

Data from: Conserved but flexible modularity in the zebrafish skull: implications for craniofacial evolvability

Morphological variation is the outward manifestation of development and provides fodder for adaptive evolution. Because of this contingency, evolution is often thought to be biased by developmental processes and functional interactions among structures, which are statistically detectable through forms of covariance among traits. This can take the form of substructures of integrated traits, termed modules, which together comprise patterns of variational modularity. While modularity is essential to an understanding of evolutionary potential, biologists currently have little understanding of its genetic basis, nor its temporal dynamics over generations. To address these open questions we compared patterns of craniofacial modularity among laboratory strains, defined mutant lines and a wild population of zebrafish (Danio rerio). Our findings suggest that relatively simple genetic changes can have profound effects on covariance, without greatly affecting craniofacial shape. Moreover, we show that instead of completely deconstructing the covariance structure among sets of traits, mutations cause shifts among seemingly latent patterns of modularity suggesting that the skull may be predisposed toward a limited number of phenotypes. This new insight may serve to greatly increase the evolvability of a population by providing a range of 'preset' patterns of modularity that can appear readily and allow for rapid evolution.

opencc-zeroDec 2017View details →
dryad28/100

Data from: The good, the bad, and the ugly: the influence of skull reconstructions and intraspecific variability in studies of cranial morphometrics in theropods and basal saurischians

Several studies investigating macroevolutionary skull shape variation in fossil reptiles were published recently, often using skull reconstructions taken from the scientific literature. However, this approach could be potentially problematic, because skull reconstructions might differ notably due to incompleteness and/or deformation of the material. Furthermore, the influence of intraspecific variation has usually not been explored in these studies. Both points could influence the results of morphometric analyses by affecting the relative position of species to each other within the morphospace. The aim of the current study is to investigate the variation in morphometric data between skull reconstructions based on the same specimen, and to compare the results to shape variation occurring in skull reconstructions based on different specimens of the same species (intraspecific variation) and skulls of closely related species (intraspecific variation). Based on the current results, shape variation of different skull reconstructions based on the same specimen seems to have generally little influence on the results of a geometric morphometric analysis, although it cannot be excluded that some erroneous reconstructions of poorly preserved specimens might cause problems occasionally. In contrast, for different specimens of the same species the variation is generally higher than between different reconstructions based on the same specimen. For closely related species, at least with similar ecological preferences in respect to the dietary spectrum, the degree of interspecific variation can overlap with that of intraspecific variation, most probably due to similar biomechanical constraints.

opencc-zeroDec 2012View details →
dryad28/100

Data from: Cranial ontogeny of Thamnophis radix (Serpentes: Colubroidea) with a re-evaluation of current paradigms of snake skull evolution

Accurate knowledge of skeletal ontogeny in extant organisms is crucial in understanding important morpho-functional systems and in enabling inferences of the ontogenetic stage of fossil specimens. However, detailed knowledge of skeletal ontogeny is lacking for most squamates, including snakes. Very few studies have discussed postnatal development in snakes, with none incorporating data from all three major ontogenetic stages – embryonic, juvenile, and adult. Here, we provide the first analysis encompassing these three ontogenetic stages for any squamate, using the first complete micro-computed tomography (micro-CT)-based segmentations of any non-adult snake, based on fresh specimens of Thamnophis radix. The most significant changes involve the feeding apparatus, with major elongation of the tooth-bearing elements and jaw suspensorium causing a posterior shift in the jaw articulation. This shift enables macrostomy (large-gaped feeding in snakes) and occurs in T. radix via a different developmental trajectory than in most other macrostomatans, indicating that the evolution of macrostomy is more complex than previously thought. The braincase of T. radix is also evolutionarily unique among derived snakes in lacking a crista circumfenestralis, a phenomenon considered herein to represent paedomorphic retention of the embryonic condition. We thus present a number of important challenges to current paradigms regarding snake cranial evolution.

opencc-zeroJul 2019View details →
dryad28/100

Data from: Dietary hardness, loading behavior, and the evolution of skull form in bats

The morphology and biomechanics of the vertebrate skull reflect the physical properties of diet and behaviors used in food acquisition and processing. We use phyllostomid bats, the most diverse mammalian dietary radiation, to investigate if and how changes in dietary hardness and loading behaviors during feeding shaped the evolution of skull morphology and biomechanics. When selective regimes of food hardness are modeled, we found that species consuming harder foods have evolved skull shapes that allow for more efficient bite force production. These species have shorter skulls and a greater reliance on the temporalis muscle, both of which contribute to a higher mechanical advantage at an intermediate gape angle. The evolution of cranial morphology and biomechanics also appears to be related to loading behaviors. Evolutionary changes in skull shape and the relative role of the temporalis and masseter in generating bite force are correlated with changes in the use of torsional and bending loading behaviors. Functional equivalence appears to have evolved independently among three lineages of species that feed on liquids and are not obviously morphologically similar. These trends in cranial morphology and biomechanics provide insights into behavioral and ecological factors shaping the skull of a trophically diverse clade of mammals.

opencc-zeroDec 2011View details →
dryad28/100

Data from: The evolution of morphological integration in the ruminant skull

Patterns of morphological integration have the potential to influence evolutionary trajectories. However, this influence depends on the stability of the integration pattern relative to the rate of evolutionary change. Studying the evolution of integration over large phylogenetic scales is complicated by its multivariate nature and the need to have both large sample sizes and a comprehensive taxon coverage. As a result, the question of how integration evolves over long time scales is still poorly understood. In this study I examined the evolution of integration across the phylogeny of extant ruminants, as reflected in their within-population covariation structure. I analyzed interlandmark distances from 2,054 skulls, representing 47 out of the 200 extant species of ruminants, including all major subfamilies of bovids and cervids. I estimated the within-population covariance matrix for each species, and compared them using multidimensional scaling and phylogenetic comparative methods. Results show that closely-related taxa differ substantially from each other in their integration pattern. However, the differences among higher-level clades still reflect their history of common descent. Differences between bovids and cervids involve mainly the oral and nasal regions, in accord with their different feeding and locomotion adaptations. Thus, the effect of both natural selection and phylogenetic history can be detected in the ruminant skull even though integration varies considerably among closely-related species.

opencc-zeroDec 2013View details →
dryad28/100

Data from: Convergence analysis of a finite element skull model of Herpestes javanicus (Carnivora, Mammalia): implications for robust comparative inferences of biomechanical function

Predictions of skull biomechanical capability based on virtual models constitute a valuable data source for testing hypotheses about craniodental form and feeding behavior. Such comparative analyses also inform dietary reconstruction in extinct species. 3D modeling using Finite Element (FE) methods is a common technique applied to the comparative analysis of craniodental function in extinct and extant vertebrates. However, taxonomically diverse skull models in the literature often are not directly comparable to each other, in part because of distinctions in how boundary conditions are defined, but also because of substantial differences in the number of FEs composing the models. In this study, we test whether a conventional convergence test is adequate in identifying the minimum number of FEs needed to achieve internally stable results for a single species. We constructed a series of skull models of Herpestes javanicus, and simulated unilateral biting across the dentition; the models differed in the number of FEs, degrees of freedom at the joint and bite point constraints, and type of tetrahedral FEs used. We found that convergence patterns differed across constraint types, FE quantities, and bite position simulated. Four-noded tetrahedral (tet-4) FE models with relaxed constraints produced the most stable measurements compared to over-constrained tet-4 models and to relaxed tet-10 models. In absence of an optimal FE quantity from convergence testing, we propose a broadly applicable sub-sampling protocol, whereby average measurement values across multiple models per specimen are used for among-species comparisons. A regime of sampling three low FE quantity models produced the closest estimates of mean measurement values relative to larger model sets, being within the 95% bootstrap estimated confidence intervals. Future studies should focus on identifying sources of variation associated with other FE modeling protocols, so that they can be accounted for before biomechanical attributes from these simulations are used to infer form–function linkage.

opencc-zeroDec 2013View details →
dryad28/100

Data from: Biting disrupts integration to spur skull evolution in eels

The demand that anatomical structures work together to perform biological functions is thought to impose strong limits on morphological evolution. Breakthroughs in diversification can occur, however, when functional integration among structures is relaxed. Although such transitions are expected to generate variation in morphological diversification across the tree of life, empirical tests of this hypothesis are rare. Here we show that transitions between suction-based and biting modes of prey capture, which require different degrees of coordination among skull components, are associated with shifts in the pattern of skull diversification in eels (Anguilliformes). Biting eels have experienced greater independence of the jaws, hyoid and operculum during evolution and exhibit more varied morphologies than closely related suction feeders, and this pattern reflects the weakened functional integration among skull components required for biting. Our results suggest that behavioural transitions can change the evolutionary potential of the vertebrate skeleton by altering functional relationships among structures.

opencc-zeroDec 2013View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.