Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
1,491
datasets available to search
ShareScore release 0.9.0
Dataset results
1,491 results for “Ione”
Carbon-ion radiotherapy of human lung cancer
GEO Series GSE45403. Homo sapiens. 16 samples. Type: Expression profiling by array.
Next Generation Sequencing Facilitates Quantitative Analysis of Acinetobacter baylyi ADP1 Transcriptomes under heavy metal-based NPs and ions exposure
GEO Series GSE139295. Acinetobacter baylyi ADP1. 21 samples. Type: Expression profiling by high throughput sequencing.
mRNA microarray analysis of murine CTL EVs separated by ion exchange method [mRNA]
GEO Series GSE146815. Mus musculus. 2 samples. Type: Expression profiling by array.
Static Magnetic Fields Regulate T-Type Calcium Ion Channels and Mediate Mesenchymal Stem Cells Proliferation
GEO Series GSE210518. Mus musculus. 2 samples. Type: Expression profiling by high throughput sequencing.
Effect of copper ion on recovery process from freeze-thaw injury in Saccharomyces cerevisiae
GEO Series GSE14942. Schizosaccharomyces pombe; Saccharomyces cerevisiae. 6 samples. Type: Expression profiling by array.
Transcriptome-based screening of ion channels and transporters in a migratory chondroprogenitor cell line isolated from late-stage osteoarthritic cartilage
GEO Series GSE160886. Homo sapiens. 6 samples. Type: Expression profiling by array.
Optimal sizing and lifetime investigation of second life lithium-ion battery for grid-scale stationary application
Open the record for dataset details and reuse information.
Data for Development of a lifetime model for large format nickel-manganese-cobalt oxide-based lithium-ion cell validated using a real-life profile
Open the record for dataset details and reuse information.
Data for "Electro-aging model development of nickel-manganese-cobalt lithium-ion technology validated with light and heavy-duty real-life profiles"
Open the record for dataset details and reuse information.
Simulating the impact of charge exchange on beam ions in MAST-U
<p>Dataset used in paper "Simulating the impact of charge exchange on beam ions in MAST-U" to be submitted to PPCF</p>
Structurally induced tuning of the relative sensitivity of LaScO3:Cr3+ luminescent thermometers by co-doping lanthanide ions
<p>Ratiometric luminescence thermometry for remote temperature sensing has been constantly gaining an increasing popularity due to its simplicity with yet high precision. Transition metal ions still have an underestimated potential in that area as their luminescence properties can be tuned by targeted modification of the host compound. In this work, we demonstrate that concept in the phosphor LaScO<sub>3</sub>:Cr<sup>3+</sup> by co-doping with various lanthanide ions that partially substitute the La<sup>3+</sup> ions of the host. It is demonstrated that the incorporated lanthanide ions affect the bond lengths of the [CrO<sub>6</sub>]<sup>9-</sup> octahedra in the structure and thus, have a subtle impact on the local crystal field around the Cr<sup>3+</sup> ions. The changes in the crystal field strength lead to a variation in the energy gap between the thermally coupled <sup>2</sup>E<sub>(</sub><em><sub>g</sub></em><sub>)</sub> and <sup>4</sup>T<sub>2(</sub><em><sub>g</sub></em><sub>)</sub> states of Cr<sup>3+</sup>, which affects the thermal quenching behavior of the related 3d<sup>3</sup>-3d<sup>3</sup> luminescence. This has an immediate consequence for the potential future use of Cr<sup>3+</sup> together with lanthanide ions in a ratiometric luminescence thermometry and allows to selectively tune the performance of this structurally sensitive ion.</p>
Met4DX: A mass spectrum-oriented computational framework for ion mobility-resolved untargeted metabolomics
<p>Supplementary data</p>
LANL/GEO datafiles for "Kozyra et al, (2024), Multi-Species Energy-Banded Ions in the Ionosphere During the 21 January 2005 Magnetic Storm: Low-Altitude Edge of the Warm Plasma Cloak, JGR-Space Physics"
<p>Full resolution MPA data files covering the time period Jan 21-22, 2005. </p>
Experimental dataset: TEMPERATURE DEPENDENCE ON STOCHATIC DYNAMIC DIFFUSION COEFFICIENTS OF HEATED ELECTROSPRAY IONIZATION AND ATMOSPHERIC PRESSURE CHEMICAL IONIZATION MASS SPECTROMETRIC INTENSITIES OF ANALYTE IONS OF CONFIGURATIONALLY LOCKED POLYENES – THEORY AND EXPERIMENT
<p>Experimental dataset of heated electrospray ionization and atmospheric pressure chemical ionization mass spectra of configurationally locked polyenes. The dataset is empirical proof of the validity of our new model equation connecting among the stochatic dynamic diffusion parameter, the temperature and the mass spectrometric measurable variable 'intensity' of an observable peak of analyte ion.</p>
Transition metal ions as a new therapeutic target for cardiac light chain amyloidosis
<p>This dataset comprises raw data related to the study “Transition metal ions as a new therapeutic target for cardiac light chain amyloidosis”, aimed at investigating the <em>in vitro </em>and <em>in vivo</em> role of transition metal ions in the redox process underlying LC cardiotoxicity. This research was funded by Italian Ministry of Health (Ricerca Finalizzata RF-2016-02361756 to Prof. Giovanni Palladini).</p>
Dense ion clouds attracted by supercharged supramolecular polymers boost development of neurons
GEO Series GSE253178. Mus musculus. 9 samples. Type: Expression profiling by high throughput sequencing.
ACE Electron Proton Alpha Monitor (EPAM) CA60 PHA Sectored Ion SEP Event Accumulated Count Rates, 17 min Averages
Synchronously accumulated rates for the Composition Aperture channels used in the Pulse Height Analyzer matrix data.
DE 1 Retarding Ion Mass Spectrometer (RIMS) Low Channel, H+ and He++, and High Channel, He+, O+, and O++, Density, Temperature, and Electric Potential, 1 min Data
The Data were provided by Dennis Gallagher, MSFC. The Retarding Ion Mass Spectrometer, RIMS, consisted of a Retarding Potential Analyzer for Energy Analysis in Series with a Magnetic Ion-Mass Spectrometer for Mass Analysis. Multiple Sensor Heads permitted the Determination of the Thermal Plasma Flow Characteristics. This Instrument was designed to operate in two basic Commandable Modes: a High-Altitude mode in which the Density, Temperature, and Bulk Flow Characteristics of principally H+, He+, and O+ Ions were measured, and a Low-Altitude Mode that concentrated on the Composition in the 1-u to 32-u Range. This Investigation provided Information on: (1) The Densities of H+, He+, and O+ Ions in the Ionosphere, Plasmasphere, Plasma Trough, and Polar Cap including the Density Distribution along the Magnetic Vector in the Vicinity of the Satellite Apogee (2) The Temperature of H+, He+, and O+ Ions in the Ionosphere, Plasmasphere, Plasma Trough, and Polar Cap in the Energy Range from 0 eV to 45 eV (3) The Bulk Flow Velocities of H+, He+, and O+ in the Plasmapause, Plasma Trough and Polar Cap (4) The changing Character of the Cold Plasma Density, Temperature, and Bulk Flow in Regions of Interaction with Hot Plasma such as at the Boundary between the Plasmasphere and the Ring Current (5) The detailed Composition of Ionospheric Plasma in the Range from 1-u to 32-u He++ and O++ were also measured. The Instrument consisted of three Detector Heads. One looked out in the Radial Direction, and the other two looked out along the Plus and Minus Spin Axis Directions. Each Detector had a 55° half-cone Acceptance Angle. The Detector Heads had a gridded, weakly collimating Aperture where the Retarding Analysis was performed, followed by a Parallel Plate Ceramic Magnetic Mass Analyzer with two separate Exit Slits corresponding to Ion Masses in the Ratio 1:4. Ions exiting from these Slits were detected with Electron Multipliers. In the Apogee Mode, the Thermal Particle Fluxes were measured while the Potential on a Set of Retarding Grids was stepped through a Sequence of Settings. In the Perigee Mode, the Retarding Grids were grounded and the Detector utilized a Continuous Acceleration Potential Sweep that focused the Mass Ranges from 1 to 8, and 4-u to 32-u. The Time Resolution was 16 ms. Additional Details can be found in C.R. Chappell et al., Space Sci. Instrum., 5(4), 477, 1981. The Criterion for selecting Data Points to be appropriate for fitting include that the Aperature Bias equal to zero must have at least ten or more Non-Zero Points in the RPA Curve. If the Spacecraft Altitude was less that 1.3 Re, the High Voltage Monitor must be turned on, the Maximum Counter Rate Value must at least 5.0, and there must be at least four Points starting from the End of RPA Curve. Find three consecutive Points of increasing Value, reset the End of the RPA Curve to here and make certain that the last Point is one Sigma above the Noise Level (the Points excluded in previous Step). if not, then drop a Point and check the new last Point, continue until the Criteria is met. One must have at least three Points left starting at new End of the selected RPA Curve Stop first Point greater that 80% of the Maximum of Spin Curve. If not found, stop at the last Point that is less than the Maximum. There must be at least three Points left. Change the Curve from the Count Rate Curve to the l**2 Curve. If Number of Points are five or less, then do a Linear Least Squares Fit (LINFIT) to the Data. If the Linear Correlation Coefficient (LCC) greater than 0.8 then the Points will be used, if not, the data set is discarded. If the Number of Points are greater then five, then do a LINFIT to the bottom five and a LINFIT to the top five Points. If there are six or more Points, then apply LINFIT to the middle Set of five Points, saving the LCC and Slope for each Case. If all three LCCs are less than 0.800, then discard the Data Set. Through a Series of Tests, find the Set of five Points with the best LCC Slope Combination. Once the Set of five Points has been selected, add the Rest of the Points one at a time and recompute the LLC with LINFIT, if the LCC gets worse discard the added Point otherwise keep it, do this until all Points are checked. Once this Procedure is completed, the final Set of Points have been determined.
THEMIS-A: On Board moments: ESA and SST Electron/Ion moments, density, flux, velocity, pressure and temperature.
THEMIS-A On Board moments. On board data outputs include number density, particle flux, energy flux, and a six component symetric momentum flux tensor. Other moments are calculated from these partial moments on the ground adding total pressure, velocity, plasma temperature (measured as a three dimensional energy vector), and a six component symetric pressure tensor to the list of data products. Number density and total pressure are scalar outputs. Velocity is calculated in DSL, GSE, GSM, and MFA coordinates (coordinate descriptions are listed below in Table 1). Magnetic Field Aligned pressure tensor and temperature are calculated as well. All quantities are calculated for both ions and electrons from a combination of ESA and SST data. Moments data are taken at spin resolution in all ESA survey modes except burst. The spacecraft potential, as measure by the EFI, is used to correct for spacecraft charging by shifting the particle energies for calculation; this eliminates contamination from photo-electrons. Also, weighting factors are used to account for instrument specific energy and angle efficiency variations. Table 1: Coordinate Descriptions. Despun Sun - L-vector (DSL): Z-axis points towards the spin axis, the Y-axis is obtained from the cross product of Z and the Spacecraft-Sun direction as viewed from the probe. The X-axis sits in the Z-axis-Sun plane and completes a right handed system. Geocentric Solar Ecliptic (GSE): Z-axis is normal to the solar ecliptic, the X-axis points from earth towards the Sun, and Y complets a right handed system. Geocentric solar Magnetosphereic (GSM): X-axis points from Earth to the Sun, the Y-axis is orthogonal to the Earth's magnetic dipole and points towards the dusk side, and the X-Z plane contains the dipole axis. Magnetic Field Aligned (MFA): Z-axis points along magnetic field lines, the Y-axis is the orthonormal cross product of the Z-axis and a vector pointing towards the Sun, and the X-axis completes the right handed system.
ULYSSES JUPITER HISCALE LEMS 30 ION COUNTS
This data set consists of HISCALE Low-Energy Magnetic Spectrometer (LEFS) ion counts at 30 degrees from the spacecraft spin axis. These measurements were taken during the Ulysses Jupiter encounter 1991-12-31 to 1992-02-16, and include 1 hour averaged inbound cruise data (1991-12-31 to 1992-02-01), and 15 minute averaged encounter data (1992-02-02 to 1992-02-16).
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.