Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
4,276
datasets available to search
ShareScore release 0.9.0
Dataset results
4,276 results for “Estimation”
Genetic monitoring of steelhead in the Klickitat River to estimate productivity, straying, and migration timing
<div> <p>Salmonids with complex life history variation present challenges for conservation management, but genetic approaches alongside fisheries monitoring can address questions regarding viability of natural populations. We genotyped adult (n=3,108) and juvenile (n=2,624) samples of anadromous <em>Oncorhynchus</em> <em>mykiss</em> that were collected in the Klickitat River, WA, USA at traps in the lower drainage to examine tributary level productivity, straying from outside sources and variation in adult migration timing. Genetic assignment of steelhead from this system indicated that the majority were produced within or near tributaries of the middle Klickitat River (juvenile mean = 72.8%; adult mean = 87.3%). Analyses with parentage-based tagging identified that most hatchery-origin adults were assigned to the Skamania Hatchery (80.8%) as expected since this has been the release stock for decades within the Klickitat River drainage. Hatchery-origin adults were also identified from programs operating outside the Klickitat River, which were primarily strays from Snake River hatcheries. Most natural-origin steelhead were assigned to the Klickitat River, but there were also natural-origin fish identified as strays from other regions of the Columbia River (22.3% of natural returns). We also examined genes known to be associated with migration timing in adult steelhead observed at the trap and observed a strong relationship between migration date and alleles for early and late migration, but individual outliers were detected across seasons. Our results indicate that genetic variation of steelhead in the Klickitat River has been influenced by hatchery programs as well as natural-origin straying from other sub-basins, but genetic diversity remains high throughout the sub-basin, and both early and late migration alleles are maintained. The genetic diversity present in Klickitat River steelhead may enable this Endangered Species Act listed (threatened) species to better adapt to stochastic environmental conditions compared to less diverse populations. </p> </div>
Wing images used for testing new methods for estimating the total wing area of birds
<p>Images of extended wing preparations of 112 specimens representing 40 avian families were used for testing new methods for estimating the total wing area of birds.</p>
Paleohydraulic Reconstructions, Geochemical Signals and Intermittency Estimates from the Middle Eocene Escanilla Formation, Spain
<p>The Earth’s surface undergoes changes over time due to various factors such as changes in climatic processes, sea level, and tectonic activity. These changes occur gradually and often go unnoticed to the human eye but are left behind as evidence in the form of sedimentary layers and erosional patterns that can be studied over geological time periods. For instance, ancient fluvial deposits are important archives of past changes and investigating their different aspects has implications for understanding past climate and landscape evolution. This doctoral thesis is focussed on the Middle Eocene (∼40 Ma) aged Escanilla Formation in the south-central Pyrenees, Spain, and is a compilation of 4 different studies. The first study documents how ancient riverbed systematically evolved from lower slopes in coarser-grained high amalgamation (HA) intervals, and higher slopes in finer-grained low amalgamation (LA) intervals. These changes were primarily driven by climate-controlled water discharge variations rather than base level changes. The second study presents a comprehensive geochemical record of the Middle Eocene Climatic Optimum (MECO), a global warming event that occurred at ∼40 Ma, using a suite of sampled paleosols, fluvial stromatolites, and pedogenic nodules. Geochemical proxies include carbon and oxygen stable isotopes, weathering indices, mean annual precipitation, clumped isotope temperature and clay mineralogy. Based on the regional preservation of the MECO and the climate, this study highlights fluvial sedimentary successions as interesting terrestrial archives of past changes in global climate. The third study explores a relationship between water discharge, sediment flux variability, and changing fluvial stratigraphic architecture with results indicating that HA intervals were most likely deposited under more intermittent and short-lived, intense precipitation events, while LA intervals were the result of less intermittent flows throughout the year. These estimates are consistent with values from modern ephemeral rivers typically found in arid to semi-arid climatic conditions, and highlight the connection between hydroclimate, river morphodynamics, and landscape evolution. Finally, the fourth study, explores a potential relationship between the MECO and a continental arc flare-up as a source of pCO2. An increase in mercury content relative to the MECO likely suggests a link between the two. Collectively, these studies provide new insights into the complex dynamics of past climate and landscape evolution, and have implications for interpreting ancient sedimentary deposits such as changes in fluvial stacking patterns, highlighting the importance of fluvial sedimentary successions as key archives of past global climate evolution and perturbations.</p>
Abundance and population growth estimates for bare-nosed wombats
<p><span>Wildlife managers often rely on population estimates, but estimates can be challenging to obtain for geographically widespread species. Spotlight surveys provide abundance data for many species and, when conducted over wide spatial scales, have the potential to provide population estimates of geographically widespread species. The bare-nosed wombat (<em>Vombatus</em> <em>ursinus</em>) has a broad geographic range and is subject to spotlight surveys. We used 19 years (2002–2020) of annual spotlight surveys to provide the first estimates of population abundance for two of the three extant bare-nosed wombat subspecies: <em>V. u. ursinus</em> on Flinders Island; and <em>V. u. tasmaniensis</em> on the Tasmanian mainland. Using distance sampling methods, we estimated annual rates of change and 2020 population sizes for both sub-species. Tasmanian mainland surveys included habitat data, which allowed us to also look for evidence of habitat associations for <em>V. u. tasmaniensis</em>. The average wombat density estimate was higher on Flinders Island (0.42 ha<sup>-1</sup>, 95% CrI = 0.25 – 0.79) than on the Tasmanian mainland (0.11 ha<sup>-1</sup>, CrI = 0.07 – 0.19) and both wombat subspecies increased over the 19-year survey period with an estimated annual growth rate of 2.90% (CrI = -1.7 – 7.3) on Flinders Island and 1.20% (CrI = -1.1 – 2.9) on mainland Tasmania. Habitat associations for <em>V. u. tasmaniensis</em> were weak, possibly owing to survey design; however, we detected regional variation in density for this subspecies. We estimated the population size of <em>V. u. ursinus </em>to be 71,826 (CrI = 43,913 – 136,761) on Flinders Island, which when combined with a previously published estimate of 2,599 (CI = 2,254 – 2,858) from Maria Island, where the subspecies was introduced, provides a total population estimate. We also estimated 840,665 (CrI = 531,104 – 1,201,547) <em>V. u. tasmaniensis </em>on mainland Tasmania. These estimates may be conservative, owing to individual heterogeneity in when wombats emerge from burrows. Although these two sub-species are not currently threatened, our population estimates provide an important reference when assessing their population status in the future, and demonstrate how spotlight surveys can be valuable to inform management of geographically widespread species.</span></p>
Standard Error Estimates for ARRI Ensemble LM model outputs
<p>Summary</p> <p>Basal area per acre (BAA) standard error estimate (SEE) for all trees, pine trees, and non-pine trees across three diameter at breast height (DBH) size classes, 2- to 10-inch, 10- to 14-inch, and 14+ inch. Models were informed by relative density rasters from 2018 Light Detection and Ranging (lidar) point clouds.</p> <p>Description</p> <p>The LM_SEE_rasters are modelled basal area per acre standard error estimate single band rasters. The units for the rasters’ are square foot per acre. Rasters are divided into three tree species groups: 'All' trees, 'Pine' trees (defined as trees of the genus<em> Pinus)</em>, and 'No-Pine' trees, and three size classes: LT 10 for trees with DBH between 2- and 10-inches, 10-14 for trees with DBH between 10- and 14- inch DBH, and GT 14 for trees with DBH greater than 14-inches.</p> <p>Ensemble linear regression models (LM) of estimated tree basal area per DBH class were created from Restore field plots and relative density canopy cover rasters, or RDCC (St. Peter, et al., 2023). This ensemble LM model was created using a custom R script that was based off the work detailed in Hogland, 2021. The ensemble LM script was modified to use the lm() function in place of the GAM modelling functions. The parameters used were 0.75 for the percent of data used to train the model (selected using random sampling with replacement), 50 models, and using gaussian family. The estimated BAA for each of the 50 ensemble LM models for each cell were averaged (mean) to produce the LM estimate, additionally the variability between these estimates was used to create the standard error estimate (SEE) for each cell. </p> <p>The 246 Restore field plots used to train the LM model of basal area include measurements of all trees within four non-overlapping 9m radius circular subplots within a 36m square plot. Tree diameter at breast height (DBH), species, count, and condition measurements were recorded. Measurements were summarized to the plot and DBH (square inches) was converted to basal area per acre (square feet per acre) using the formula 0.005454 * DBH^2. Restore field plots were measured in the Spring of 2018. The RDCC metrics are 5m resolution multiband rasters produced by applying a custom r software function that uses the r software’s ‘lidR’ package to produce forest metrics summarized from Light Imaging Detection and Ranging (LiDAR) point clouds. ARSA LiDAR is a combination of three collections, Block 2 and 3 were collected in early 2018 and has a NPS of 0.7-m using a Riegl VQ-1560i lidar system. Leon county LiDAR data has a nominal pulse spacing (NPS) of 0.35-m and was acquired between February 05, 2018 and April 25, 2018 using the Leica ALS80 HP SN8137 and SN8235 lidar systems. Choctawhatchee data was acquired in early 2017, using the Riegl LMS-Q1560 lidar system and has a NPS of 0.7-m. Rasters were generated in their vendor provided spatial projection before being reprojected to UTM Zone 16.</p> <p>The 5m resolution RDCC bands were summarized to 40x40m to correspond with the area of our plots and used as predictor variables in the models of all trees basal area. Each 5m pixel value represents the estimated standard error of the basal area per acre estimate as if it was the center of a 40x40m (8x8 cells) plot surrounding that pixel. </p> <p>References:</p> <p>Hogland, J. (2021). Ensemble Generalized Additive Models (EGAM). Retrieved from Jupyter Notebook: <a href="https://colab.research.google.com/drive/1GnRagruTUCoPJQZSkZ2vMKS9aAKgnhEw?usp=sharing">https://colab.research.google.com/drive/1GnRagruTUCoPJQZSkZ2vMKS9aAKgnhEw?usp=sharing</a></p> <p>St. Peter, Joseph, Drake, Jason, Medley, Paul, & Ibeanusi, Victor. (2023). Relative Density Canopy Cover Outputs for Leon Lidar data in the Florida Panhandle 2018 [Data set]. In Remote Sensing (Vol. 13, Number 23, p. 4763). Zenodo. <a href="https://doi.org/10.5281/zenodo.8222114">https://doi.org/10.5281/zenodo.8222114</a></p> <p>Credits</p> <p>This dataset was built by Joseph St. Peter of FAMU’s Center for Spatial Ecology and Restoration using 2018 LiDAR data funded by Leon County, Northwest Florida Water Management District, US Geological Survey and the USDA Forest Service and processed using the r package lidR. Restore plots were funded by the Gulf Coast Ecosystem Restoration Council (RESTORE Council) through an interagency agreement with the USDA Forest Service (17-IA-11083150-001) for the Apalachicola Tate’s Hell Strategy 1 project.</p> <p>Use Limitations</p> <p>This spatial data is based on various data collection and processing techniques as well as on modeling or interpretation. While this data uses the most current and complete information available at the time of production, spatial data and derivative products may vary in accuracy. Spatial data are often developed from sources of differing accuracy which may be accurate only at certain scales. This data has been quality checked but may contain spurious errors or be incomplete or inappropriate for certain uses. Spatial data products used for purposes other than those for which they were created, may yield inaccurate or misleading results. The USDA Forest Service, Florida A&M University, and the Center for Spatial Ecology & Restoration (CSER) reserves the right to correct, update, modify, remove or replace GIS products at any time and without notification. This data may not be distributed without written permission from the Center for Spatial Ecology & Restoration (CSER) at Florida A&M University, and/or the USDA Forest Service.</p>
Dataset for: Estimating pregnancy rate from blubber progesterone levels of a blindly biopsied beluga population poses methodological, analytical and statistical challenges
<p class="MsoBodyText"><span>Beluga (<em>Delphinapterus leucas</em>) from the St. Lawrence Estuary, Canada, have been declining since the early 2000s, suggesting recruitment issues as a result of low fecundity, abnormal abortion rates or poor calf or juvenile survival. Pregnancy is difficult to observe in cetaceans, making the ground-truthing of pregnancy estimates in wild individuals challenging. Blubber progesterone concentrations were contrasted among 62 SLE beluga with a known reproductive state (i.e., pregnant, resting, parturient, and lactating females), that were found dead in 1997–2019. The suitability of a threshold obtained from decaying carcasses to assess reproductive state and pregnancy rate of freshly-dead or free-ranging and blindly-sampled beluga was examined using three statistical approaches and two datasets (135 freshly-harvested carcasses in Nunavik, and 65 biopsy-sampled SLE beluga). Progesterone concentrations in decaying carcasses were considerably higher in known-pregnant (mean </span><span>±</span><span> sd: </span><span>365 </span><span>±</span><span> 244 ng g<sup>-1</sup> of tissue) </span><span>than resting (</span><span>3.1 </span><span>±</span><span> 4.5 ng g<sup>-1</sup> of tissue</span><span>) or lactating (</span><span>38.4 </span><span>±</span><span> 100 ng g<sup>-1</sup> of tissue</span><span>) females. An approach based on statistical mixtures of distributions and a logistic regression was compared to the commonly-used, fixed threshold approach (here, 100 ng g<sup>-1</sup>) for discriminating pregnant from non-pregnant females. The error rate for classifying individuals of known reproductive status was the lowest for the fixed threshold and logistic regression approaches, but the mixture approach required limited <em>a priori</em> knowledge for clustering individuals of unknown pregnancy status. Mismatches in assignations occurred at lipid content <10% of sample weight. Our results emphasize the importance of reporting lipid contents and progesterone concentrations in both units (ng g<sup>-1 </sup>of tissue and ng g<sup>-1</sup> of lipid) when sample mass is low. By highlighting ways to circumvent potential biases in field sampling associated with capturability of different segments of a population, this study also enhances the usefulness of the technique for estimating pregnancy rate of free-ranging population. </span></p>
Dataset associated with "Effect of sampling bias on global estimates of ocean carbon export"
<p>Dataset and Matlab code for plotting the figures in the manuscript "Effect of sampling bias on global estimates of ocean carbon export", submitted to Geophysical Research Letters.</p>
Validation data for macromolecular occupancy estimation
<p>Macromolecular densities used to validate OccuPy v0.1:</p> <ol> <li>Synthetic densities of pdb 1UXI with altered: <ul> <li>Occupancy of chain A</li> <li>Occupancy of NAD cofactors </li> <li>Bfactor of chain A at occupancy 0.5 of chain A</li> </ul> </li> <li>Reconstructions of rotavirus spike protein: <ul> <li>No selection for spike, subsets of various particle numbers </li> <li>Positive selection (enriched) for spike, subsets of various particle numbers</li> </ul> </li> </ol>
Data from: Evaluating predator control using two non-invasive population metrics: a camera trap activity index and density estimation from scat genotyping
<p>Includes datasets from the Wimmera and Mallee, Victoria, Australia:</p> <p>- Fox camera trap data used to model activity</p> <p>- Fox scat SECR capture and trap files used to model density</p>
Mark-recapture dataset to estimate age-specific reproductive rates of Steller sea lions in Southeast Alaska
<p>Age, region, and year-specific estimates of reproduction are needed for monitoring wildlife populations during periods of ecosystem change. Population dynamics of Steller sea lions (<em>Eumetopias jubatus</em>) in Southeast Alaska varied regionally (with high population growth and survival in the north versus the south) and annually (with reduced adult female survival observed following a severe marine heatwave event), but reproductive performance is currently unknown. We used mark-resighting data from 1,006 SSL females marked as pups at age ~3 weeks of age from 1994–1995 and 2001–2005 and resighted from 2002–2019 (to a maximum age of 25) to examine age-, region-, and year-specific reproduction. In the north versus the south, age of first reproduction was earlier (beginning at age 4 versus age 5, respectively) but annual birth probabilities of parous females were reduced by 0.05. In an average year pre-heatwave, the proportion of females with pup at the end of the pupping season peaked at ages 12–13 with ~0.60/0.65 (north/south) with pup, ~0.30/0.25 with juvenile, and ~0.10 (both regions) without a dependent. In both regions, reproductive senescence was gradual after age 12: ~0.40, 0.40, and 0.20 of females were in these reproductive states, respectively, by age 20. Correcting for neonatal mortality, true birth probabilities at peak ages were 0.66/0.72 (north/south). No cost of reproduction on female survival was detected, but pup production remained lower (-0.06) after the heatwave event, which if sustained would result in population decline in the south. Reduced pup production and greater retention of juveniles during periods of poor prey conditions may be an important strategy for Steller sea lions in Southeast Alaska, where fine-tuning reproduction based on nutritional status may improve the lifetime probability of producing pups under good conditions in a variable and less productive environment. </p>
TC25/Chicago_COMPASS: Present-day heat-related estimates for Chicago community areas [COMPASS-GLM]
<p>Chicago_COMPASS</p> <p>Community area summaries for Chicago and related scripts. Specifics below:</p> <p>Data</p> <p>Each CSV file provides summaries for 77 community areas in Chicago from WRF simulations, satellites, and socioeconomic surveys.</p> <p>The spatial polygons for the community areas and the socioeconomic data were accessed through the Chicago Data Portal: <a href="https://data.cityofchicago.org/">https://data.cityofchicago.org/</a></p> <p>The WRF code is open source and can be found at: <a href="https://github.com/wrf-model/WRF">https://github.com/wrf-model/WRF</a></p> <p>Chicago_control, Chicago_no_urb, and Chicago_no_lake have the maximum and minimum average variables of interest for the control, no urban, and no lake simulations. These are for the BEM/BEP runs with the YSU boundary layer scheme and are used for the main results of the paper.</p> <p>The WRF_BEM_MYJ files are for the BEM/BEP control runs with the MYJ boundary layer scheme. The WRF_Noah files are the control runs using just the Unified Noah land surface model (no urban canopy). The WRF_nested file is for a control run using 3-way nested domains, with the inner domain over Chicago at 1.333 km using BEM/BEP and the YSU boundary layer scheme.</p> <p>Chicago_perc_control, Chicago_perc_no_urb, and Chicago_perc_no_lake have the 95th and 98th percentiles of hourly variables of interest for the control, no urban, and no lake simulations.</p> <p>Chicago_MODIStime_control has the daytime and nighttime variables of interest (corresponding to MODIS Aqua overpass) for the control simulations.</p> <p>en01, en02, en03, and so on represent the ensembles for each model configuration.</p> <p>Chicago_geo_socioeconomic includes the socioeconomic variables (median income per capita and Hardship Index), spatial metrics (area and distance from the coast), and satellite-derived estimates (daytime and nighttime land surface temperature (LST), and normalized different vegetation index (NDVI).</p> <p>Scripts</p> <p>WRF_to_tabular.R converts the WRF simulations into tabular data to be injested into Google Earth Engine.<br> Rasterize.js converts the tabular WRF results into a raster with separate bands for each variable on Google Earth Engine.<br> Summarize.js processeses satellite observations and summarizes the satellite and WRF outputs into regions of interest on Google Earth Engine.</p>
A Novel Algorithm for Estimating Web Page Ranking in Search Engine Results Pages
<p><em><strong>Abstract:</strong> </em>Search engine optimization (SEO) can make a big improvement in the traffic to a web page. Because search engines keep their main rules of ranking undeclared, it’s important to develop models that can estimate the ranking of a web page in the search engine to be able to optimize web pages to rank higher in the search engine. The available research methodologies used machine learning algorithms to provide solutions for this target with the help of generated datasets by scraping the search engine results pages (SERP) and crawling web pages. Their proposed models suffered from the inability to be updated dynamically if the search engine updated its ranking algorithm, and their input data did not include the diversity of web pages and languages. This research will propose a novel original rank estimation algorithm that’s able to overcome other research challenges, with a set of comparative experiments and complexity analysis. Results will show that the proposed algorithm could achieve higher values of accuracy, precision, and recall.</p> <p><strong><em>Dataset: </em></strong></p> <p>For research purpose, the dataset will play two roles, first, it will act the role of search engine result pages (SERP), and second, it will be used to test algorithms and calculate performance measurements. Dataset is consisting of 9930 web pages, aimed to identify search results pages, focusing on the top 3 pages of SERP, with 31 extracted attributes that's related to search engine optimization (SEO). The distribution of examples between class labels was balanced, with changes due to scraping operation issues, but not significantly different, with fractions of 39.9%, 34.6%, and 25.5% for the class labels page1, page2, and page 3. Feature names are: 'Title 1 Length', 'Title 2 Length', 'Meta Description 1 Length', 'Meta Description 2 Length', 'Meta Keywords 1 Length', 'H1-1 Length', 'H1-2 Length', 'H2-1 Length', 'H2-2 Length', 'Size (bytes)', 'Word Count', 'Text Ratio', 'Inlinks', 'Unique Inlinks', 'Unique JS Inlinks', '% of Total', 'Outlinks', 'Unique Outlinks', 'Unique JS Outlinks', 'External Outlinks', 'Unique External Outlinks', 'Unique External JS Outlinks', 'Response Time', 'Status Code', 'Keyword in MetaDescription1', 'Keyword in Title1', 'Keyword in MetaKeywords1', 'Keyword in URL', 'Has LastModified', 'Keyword in Headers', and 'Keyword in Emphasized Text'.</p> <p>The process of dataset generation involved scraping the search engine, extracting URLs for selected keywords, focusing on feature extraction, cleaning and preprocessing, and generating new attributes related to keywords in web pages. It involved also removing missing values, duplicates, and data type conversions to obtain a comprehensive dataset.<br> Keyword selection involves selecting keywords from various categories and considering diversity, including high and low traffic, long-term and short-term keywords, and generic and branded keywords. Apify online tool was used for search engine scraping with default language and US country, resulting in 388 selected keywords with 30 results per keyword. Dataset included extracted SEO features from 9991 web pages using screamingFrog desktop software and Rapidminer desktop software, determining page SEO-friendliness and comparing it to SERP rankings. Dataset cleaning involved removing redundant attributes, removing paid SERP results, replacing missing values, and converting data types. Rapidminer was used for data cleaning and preprocessing, generating new attributes related to keyword usage in web pages.<br> </p>
Global sea-surface DMS concentrations estimated through data-driven approaches
<p>DMS_ML_average.nc and DMS_SAT-OPT_average.nc represent the 10-year (2011-2020) average monthly seawater DMS concentrations (1°x1°) calculated using two different methods, ML and SAT-OPT, respectively.</p>
Datasets used in "Evidential Deep Learning: Enhancing Predictive Uncertainty Estimation for Earth System Science Applications"
<p>The precipitation type (p-type) dataset (ptype.parquet) comprises observational weather reports sourced from the Meteorological Phenomena Identification Near the Ground (mPING) project, combined with corresponding numerical weather prediction data from the NOAA Rapid Refresh (RAP) model. These crowd-sourced mPING reports offer precipitation type labels (rain, snow, sleet, and freezing rain) across North America, while the RAP model provides atmospheric data, including temperature, humidity, and wind profiles, on pressure levels.</p> <p> </p> <p>The RAP data covers the contiguous United States (CONUS) from 2015 to 2022 on an hourly 13km grid. The mPING observations are matched to the nearest RAP grid cell and hour, allowing the two data sources to be merged into a labeled dataset suitable for classification tasks. </p> <p> </p> <p>The surface layer flux dataset (surface_layer.csv) contains high-frequency meteorological observations spanning from 2013 to 2015, collected at the Cabauw Experimental Site in the Netherlands. It includes measurements of various variables such as temperature, humidity, wind, radiation, and soil moisture, recorded every 10 minutes. The target output encompasses friction velocity, sensible heat, and latent heat.</p> <p><br> The code used for processing the datasets and training neural network models is available in the Miles-Guess repository (<a href="https://github.com/ai2es/miles-guess">https://github.com/ai2es/miles-guess</a>).</p>
Data from: In situ correlation between microplastic and suspended particulate matter concentrations in river-estuary systems support proxies for satellite-derived estimates of microplastic flux
<p>Data from Sullivan et al., (in press) In situ correlation between microplastic and suspended particulate matter concentrations in river-estuary systems support proxies for satellite-derived estimates of microplastic flux, <em>Marine Pollution Bulletin. </em></p> <p>It contains the summary of the in situ measurements of TSM and microplastic counts and concentrations for each site. For more detail on the methods, users are directed to the methods section 2.2 of the open access paper. </p>
Data from: Plant-derived environmental DNA complements diversity estimates from traditional arthropod monitoring methods but outperforms them detecting plant-arthropod interactions
<p>Our limited knowledge about the ecological drivers of global arthropod decline highlights the urgent need for more effective biodiversity monitoring approaches. Monitoring of arthropods is commonly performed using passive trapping devices, which reliably recover diverse communities, but provide little ecological information on the sampled taxa. Especially the manifold interactions of arthropods with plants are barely understood. A promising strategy to overcome this shortfall is environmental DNA (eDNA) metabarcoding from plant material on which arthropods have left DNA traces through direct or indirect interactions. However, the accuracy of this approach has not been sufficiently tested. In four experiments, we exhaustively test the comparative performance of plant-derived eDNA from surface washes of plants and homogenized plant material against traditional monitoring approaches. We show that the recovered communities of plant-derived eDNA and traditional approaches only partly overlap, with eDNA recovering various additional taxa. This suggests eDNA as a useful complementary tool to traditional monitoring. Despite the differences in recovered taxa, estimates of community α- and β-diversity between both approaches are well correlated, highlighting the utility of eDNA as a broad scale tool for community monitoring. Last, eDNA outperforms traditional approaches in the recovery of plant-specific arthropod communities. Unlike traditional monitoring, eDNA revealed fine-scaled community differentiation between individual plants and even within plant compartments. Especially specialized herbivores are better recovered with eDNA. Our results highlight the value of plant derived eDNA analysis for large-scale biodiversity assessments that include information about community level interactions.</p>
Tables of results for lower mantle viscosity estimates
<p>Data on diffusivity, grain size, and viscosity calculations are presented in Figs. 7-9 and Figs. S4-S5 of Okamoto and Hiraga's "A Common Diffusional Mechanism for Creep and Grain Growth in Polycrystalline Rocks: Application to Lower Mantle Viscosity Estimates."</p>
Automatic Featurization Aided Data-Driven Method for Estimating the Presence of Intermetallic Phase in Multi-Principal Element Alloys
<p><strong>Description:</strong></p> <p>There are two folders in the dataset:</p> <p><strong>(A. ) AutomaticFeaturizerMPEA.zip</strong> : </p> <p>AutomaticFeaturizerMPEA.pynb is an interactive computational environment developed in python programming language to compute the properties of Multi Principal-component Element Alloy (MPEA) system .</p> <p>The code present in the .ipynb file is capable of firstly extracting composition feature from the name of MPEA and then compute thermodynamic/physical and chemical properties using these composition features. The properties that can be automatically calculated and featurized by the code are: <br> 1. Valence Electron Concentration<br> 2. Average Melting Temperature<br> 3. Enthalpy of Mixing<br> 4. Entropy of Mixing<br> 5. Electronegativity<br> 6. Atomic size difference<br> 7. Omega parameter <br> 8. 41 elemental composition</p> <p>The primary source used for the calculation of these alloy properties are taken from two python libraries: "pymatgen" and "matminer". </p> <p>The AutomaticFeaturizerMPEA.pynb is not only capable of calculating an alloy's properties but also featurizes them along with the composition and export it as a .csv file for further machine learning training process. The AutomaticFeaturizerMPEA.pynb file consists of two parts:</p> <p>1. "Part 1": A sample set of 25 MPEAs is used to demonstarte how to calculate & featurize the porperties and composition of alloy, save the calculated values in a .csv file.<br> 2. "Part 2": The alloy property of a single MPEA "Ti0.8CoCrFeNiCu" is calculated using the same code, if one needs to calculate them for a single MPEA at a time (as in our GUI application IMCATHEA https://github.com/subediupadesh/IMCATHEA) </p> <p>The repository also consists two "CSV" files:</p> <p>1. "MPEA_data.csv" file is the sample set of 25 collected MEPA observations with their source and phase information in one hot encoding method for which we want to calculate their properties and featurize them.<br> 2. "Featurized_MPEA.csv" file is the processed ready to train file which consists of MPEA, their properties and composition featurized in special order. It is the final file generated by the AutomaticFeaturizerMPEA.pynb python file.</p> <p> </p> <p><strong>(B.) IMCATHEA.zip:</strong> </p> <p>IMCATHEA is a python based Graphical User Interface application capable of detecting the IM phase in a High Entropy Alloy or Multi Principal Element Alloy system using a Neural Network Algorithm.</p> <p>## For Linux User:<br> Python with following libraries are needed to run the GUI application: pymatgen (v2022.0.16), matminer (v0.7.4), tensorflow (v2.2.0), pandas (v1.3.4), numpy (v1.21.2), tkinter (v8.6), sklearn (v1.0.1).</p> <p>"IMCATHEA_GUI.py" also needs 4 extra supporitng files (icon, standardizations, and model) to operate, which will be made available from the author upon reasonable request. </p> <p><br> ## For Windows User:<br> Executable (.exe) file: </p> <p>User can run "IMCATHEA_GUI.exe" wihout any softwares to be installed.</p> <p><br> ## Procedure for using "IMCATHEA" GUI Application:</p> <p>Step 0. Open / Run "IMCATHEA_GUI.py" (for Linux users) & "IMCATHEA_GUI.exe" (for Windows users) file to open the GUI application</p> <p>Step 1. User need to select the No. of Elements/Components in the HEA where IM phase is to be detected, from the dropdown menu at the top left corner.<br> After selection of element size/number (from 2 to 10),<br> <br> Step 2. User can select each element of HEA, one at a time from the drop down menu generated just below "No. of Component" tab</p> <p>Step 3. After selection of each element a blank space is provided just at the right side of selected element tab where user need to enter the corresponding composition/elemental fraction of the element.</p> <p>Step 4. Repeat Step 2-3 until the last element of the HEA and it's composition/elemental fraction is entered.</p> <p>Step 5. Press "Detect IMC" tab to get the prediction if IM is present in the provided HEA or not along with the physical properties of the entered HEA displayed in the right side of the GUI application.</p> <p>Step 6. If user wants to detect the presence or absence of IM phase for another HEA, user can click on "Restart" tab at the right top side of GUI application to restart the application instantly.</p> <p><br> If the user makes errors while selecting any options from dropdown menu as suggested in Step 1,2,3,4 user can click on "Restart" tab at the right top side of GUI application to restart the application instantly and start the process for prediction again from Step 1.</p> <p>## Video (YouTube) Tutorial for using IMCATHEA:<br> The stepwise process to predict the phase for an example case of "CrNbTiZr" MPEA is shown in the YouTube video tutorial at: https://youtu.be/G3aHE1Wsmgk</p>
Estimation of non-health Gross Domestic Product (NHGDP) loss due to COVID-19 deaths in West Bengal, India
<p>This study estimates the economic losses (GDP), particularly the impact of COVID-19 deaths on non-health components of GDP in West Bengal state. The NHGDP losses were evaluated using cost-of-illness approach. Future NHGDP losses were discounted at 3%. Excess death estimates by the World Health Organisation (WHO) and Global Burden of Disease (GBD) were used. Sensitivity analysis was carried out by varying discount rates and Average Age of Death (AAD).</p> <p>21,532 deaths in West Bengal since 17th March 2020 till 31st December 2022 decreased the future NHGDP by $0.92 billion. Nearly 90% of loss was due to deaths occurring in above 30 years age-group. The majority of the loss was borne among the 46–60 years age-group. The NHGDP loss/death was $42,646, however, the average loss/death declined with a rise in age. The loss increased to $9.38 billion and $9.42 billion respectively based on GBD and WHO excess death estimates. The loss increased to $1.3 billion by considering the lower age of the interval as AAD. At 5% and 10% discount rates, the losses reduced to $0.769 billion and $0.549 billion respectively.</p> <p>Results from the study suggest that COVID-19 contributed to major economic loss in West Bengal. The mortality and morbidity caused by COVID-19, the substantial economic costs at individual and population levels in West Bengal, and probably across India and other countries, is another argument for better infection control strategies across the globe to end the impact of this epidemic.</p>
Simulation data for paper "Estimation of in-situ stresses and friction properties of rock masses based on natural fractures conductivity: a case study from C0002 well at Nankai Trough zone, offshore Shikoku Island, Japan"
<p>Supplementary files for Dubinya, Tikhotskiy paper entitled "Estimation of in-situ stresses and friction properties of rock masses based on natural fractures conductivity: a case study from C0002 well at Nankai Trough zone, offshore Shikoku Island, Japan" prepared for submission to Journal of Geophysical Research: Solid Earth.</p> <p> </p> <p>File "Initial data on fractures.csv" contains initial data on conductivity of natural fractures, their deoths and spatial orientations</p> <p>Files "Unit N, (un)limited friction" contain results of Monte-Carlo simulations completed based on data from fractures from N-th interval. Friction coefficient is varied either between 0 and 1 (unlimited friction), or 0.4 and 0.6 (limited friction).</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.