Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
1,620
datasets available to search
ShareScore release 0.9.0
Dataset results
1,620 results for “springs”
Baliles Center (Hull Springs) Aimes Creek water depth data from 2021-10-19 to 2019-11-11
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Aimes Creek water depth data from 2021-05-04 to 2021-10-30
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) YSI data from 2021-09-18 to 2021-10-30
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Aimes Creek YSI Data 2019-08-10 to 2019-09-29
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Aimes Creek YSI Data 2017-07-01 to 2017-12-31
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Aimes Creek YSI data 2016-07-01 to 2016-12-31
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Aimes Creek YSI data 2015-06-16 to 2015-07-21
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Aimes Creek YSI Data 2018-01-01 to 2018-12-22
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) YSI data 2021-10-30 to 2021-12-04
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p> </p> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p> </p> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Baliles Center (Hull Springs) Dock depth and temperature data from 2021-12-04 to 2022-02-05
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p> </p> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p> </p> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>NOTE: The YSI sonde failed during this deployment so only the depth and temperature data are available from the pressure transducer.</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Hull Springs Weather Station 2022-02-05 to 2022-03-08
<pre># General Metadata for Hull Springs Farm Atmospheric Sampling Station ## Files Specific metadata for each deployment can be found as text files with the file format of: HSF_weather_YYYY-MM-DD_metadata.txt Where YYYY-MM-DD is the date that the sampling period ended. ## File Created * 2019-10-27 by KF ## File Modified ## Description These data are from a weather station installed at Hull Springs Farm near the "Yellow House" (38.121683, -76.666781) as part of the Longwood Environmental Observatory. All data are CC-BY and should be cited using the DOI available at https://zenodo.org/communities/leo/ ## Station Specifics The specific at each site are: * Barometric Pressure (mmHg) - Campbell Scientific CS100 Barometric Pressure Sensor * Light Flux Density (kW/m^2) - Campbell Scientific Pyranometer CS300 * Light Total Flux (kJ/m^2) - Campbell Scientific Pyranometer CS300 * Rainfall (mm) - Texas Electronics TE525 Tipping Bucket * Temperature (dC) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Relative Humidity (%) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Wind Speed (m/s) - RM Young 05103 Wind Speed and Direction Sensor * Wind Direction (degrees from true N) - RM Young 05103 Wind Speed and Direction Sensor * Data Collection - Campbell Scientific CR200 Data Logger * The sensors are sampled every 15 minutes ## Measurement Parameters, units, and Variable Names * DATE - the date that the record was collected (YYYY-MM-DD) * TIMESTAMP - the date and time that the record was collected (YYYY-MM-DD HH:MM:SS) * RECORD.x - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Avg - The average battery voltage (Volts) * BattV - The battery voltage at the time of the sampling (Volts) * BP_mmHg_Avg - The average barometric pressure over the sampling interval (mmHg) * BP_mmHg_Std - The standard deviation of the average barometric pressure (mmHg) * BP_mmHg - The barometric pressure at the time of the sampling (mmHg) * Rain_mm_Tot - The total rainfall during the sampling interval (mm) NOTE: These data were not collected due to hardware failure. * AirTC_Avg - The average air temperature during the sampling interval (dC) * AirTC_Std - The standard deviation of the average air temperature (dC) * AirTC - the air temperature at the time of the sampling (dC) * RH - the relative humidity at the time of the sampling (%) * RH_Min - the minimum relative humidity recorded (%) * RH_TMn - the time that the minimum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RH_Max - the maximum relative humidity recorded (%) * RH_TMx - the time that the maximum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RECORD.y - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Min - the minimum battery voltage (Volts) * SlrkW_Avg - the average light flux density during the sampling interval (kW/m^2) * SlrkW_Std - the standard deviation of the average light flux density (kW/m^2) * SlrkW - the light flux density at the time of the sampling (kW/m^2) * SlrMJ_Tot - the total light flux (MJ/m^2) * WS_ms_Avg - the average wind speed during the sampling interval (m/s) * WS_ms_Std - the standard deviation of the average wind speed (m/s) * WS_ms - the wind speed at the time of the sampling event (m/s) * WindDir - the wind direction at the time of the sampling event (degrees from true N) * WS_ms_S_WVT - the average wind speed over the previous 15 minutes (m/s) * WindDir_D1_WVT - the average wind direction over the previous 15 minutes (degrees from true N) * WindDir_SD1_WVT - the standard deviation of the average wind direction over the previous 15 minutes (degrees from true N)</pre>
Fig. 1 in Sharp Differences In The Timing Of Male And Female Spring Arrival In The European Stonechat, Saxicola Rubicola, And The Whinchat, S. Rubetra (Passeriformes, Muscicapidae), In North-Eastern Ukraine
Fig. 1. Spring arrival schedules of male and female Common Stonechats (Saxicola rubicola) and male and female Whinchats (S. rubetra) at the study plot in the Murom River flood plain (Kharkiv Region, Ukraine). The dates were standardised by assigning 1 Day value for the arrival of first bird in a certain year (the data for years 1994–1995, 2002–2004 are presented).
Baliles Center (Hull Springs) Weather Data from 2021-12-04 to 2022-02-05
<p>General Metadata for Hull Springs Farm Atmospheric Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HSF_weather_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>File Created</p> <ul> <li>2019-10-27 by KF</li> </ul> <p>File Modified</p> <p>Description</p> <p>These data are from a weather station installed at Hull Springs Farm near the "Yellow House" (38.121683, -76.666781) as part of the Longwood Environmental Observatory.</p> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The specific at each site are:</p> <pre><code>* Barometric Pressure (mmHg) - Campbell Scientific CS100 Barometric Pressure Sensor * Light Flux Density (kW/m^2) - Campbell Scientific Pyranometer CS300 * Light Total Flux (kJ/m^2) - Campbell Scientific Pyranometer CS300 * Rainfall (mm) - Texas Electronics TE525 Tipping Bucket * Temperature (dC) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Relative Humidity (%) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Wind Speed (m/s) - RM Young 05103 Wind Speed and Direction Sensor * Wind Direction (degrees from true N) - RM Young 05103 Wind Speed and Direction Sensor * Data Collection - Campbell Scientific CR200 Data Logger * The sensors are sampled every 15 minutes</code></pre> <p>Measurement Parameters, units, and Variable Names</p> <pre><code>* DATE - the date that the record was collected (YYYY-MM-DD) * TIMESTAMP - the date and time that the record was collected (YYYY-MM-DD HH:MM:SS) * RECORD.x - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Avg - The average battery voltage (Volts) * BattV - The battery voltage at the time of the sampling (Volts) * BP_mmHg_Avg - The average barometric pressure over the sampling interval (mmHg) * BP_mmHg_Std - The standard deviation of the average barometric pressure (mmHg) * BP_mmHg - The barometric pressure at the time of the sampling (mmHg) * Rain_mm_Tot - The total rainfall during the sampling interval (mm) * AirTC_Avg - The average air temperature during the sampling interval (dC) * AirTC_Std - The standard deviation of the average air temperature (dC) * AirTC - the air temperature at the time of the sampling (dC) * RH - the relative humidity at the time of the sampling (%) * RH_Min - the minimum relative humidity recorded (%) * RH_TMn - the time that the minimum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RH_Max - the maximum relative humidity recorded (%) * RH_TMx - the time that the maximum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RECORD.y - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Min - the minimum battery voltage (Volts) * SlrkW_Avg - the average light flux density during the sampling interval (kW/m^2) * SlrkW_Std - the standard deviation of the average light flux density (kW/m^2) * SlrkW - the light flux density at the time of the sampling (kW/m^2) * SlrMJ_Tot - the total light flux (MJ/m^2) * WS_ms_Avg - the average wind speed during the sampling interval (m/s) * WS_ms_Std - the standard deviation of the average wind speed (m/s) * WS_ms - the wind speed at the time of the sampling event (m/s) * WindDir - the wind direction at the time of the sampling event (degrees from true N) * WS_ms_S_WVT - the average wind speed over the previous 15 minutes (m/s) * WindDir_D1_WVT - the average wind direction over the previous 15 minutes (degrees from true N) * WindDir_SD1_WVT - the standard deviation of the average wind direction over the previous 15 minutes (degrees from true N)</code></pre>
Baliles Center (Hull Springs) Weather Data from 2022-02-05 to 2022-03-08
<p>General Metadata for Hull Springs Farm Atmospheric Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HSF_weather_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>File Created</p> <ul> <li>2019-10-27 by KF</li> </ul> <p>File Modified</p> <p>Description</p> <p>These data are from a weather station installed at Hull Springs Farm near the "Yellow House" (38.121683, -76.666781) as part of the Longwood Environmental Observatory.</p> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The specific at each site are:</p> <pre><code>* Barometric Pressure (mmHg) - Campbell Scientific CS100 Barometric Pressure Sensor * Light Flux Density (kW/m^2) - Campbell Scientific Pyranometer CS300 * Light Total Flux (kJ/m^2) - Campbell Scientific Pyranometer CS300 * Rainfall (mm) - Texas Electronics TE525 Tipping Bucket * Temperature (dC) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Relative Humidity (%) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor * Wind Speed (m/s) - RM Young 05103 Wind Speed and Direction Sensor * Wind Direction (degrees from true N) - RM Young 05103 Wind Speed and Direction Sensor * Data Collection - Campbell Scientific CR200 Data Logger * The sensors are sampled every 15 minutes</code></pre> <p>Measurement Parameters, units, and Variable Names</p> <pre><code>* DATE - the date that the record was collected (YYYY-MM-DD) * TIMESTAMP - the date and time that the record was collected (YYYY-MM-DD HH:MM:SS) * RECORD.x - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Avg - The average battery voltage (Volts) * BattV - The battery voltage at the time of the sampling (Volts) * BP_mmHg_Avg - The average barometric pressure over the sampling interval (mmHg) * BP_mmHg_Std - The standard deviation of the average barometric pressure (mmHg) * BP_mmHg - The barometric pressure at the time of the sampling (mmHg) * Rain_mm_Tot - The total rainfall during the sampling interval (mm) * AirTC_Avg - The average air temperature during the sampling interval (dC) * AirTC_Std - The standard deviation of the average air temperature (dC) * AirTC - the air temperature at the time of the sampling (dC) * RH - the relative humidity at the time of the sampling (%) * RH_Min - the minimum relative humidity recorded (%) * RH_TMn - the time that the minimum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RH_Max - the maximum relative humidity recorded (%) * RH_TMx - the time that the maximum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) * RECORD.y - a unique identifying number provided from the data logger for table 1 from the original downloaded data. * BattV_Min - the minimum battery voltage (Volts) * SlrkW_Avg - the average light flux density during the sampling interval (kW/m^2) * SlrkW_Std - the standard deviation of the average light flux density (kW/m^2) * SlrkW - the light flux density at the time of the sampling (kW/m^2) * SlrMJ_Tot - the total light flux (MJ/m^2) * WS_ms_Avg - the average wind speed during the sampling interval (m/s) * WS_ms_Std - the standard deviation of the average wind speed (m/s) * WS_ms - the wind speed at the time of the sampling event (m/s) * WindDir - the wind direction at the time of the sampling event (degrees from true N) * WS_ms_S_WVT - the average wind speed over the previous 15 minutes (m/s) * WindDir_D1_WVT - the average wind direction over the previous 15 minutes (degrees from true N) * WindDir_SD1_WVT - the standard deviation of the average wind direction over the previous 15 minutes (degrees from true N)</code></pre>
Baliles Center (Hull Springs) Restored Wetland Data from 2021-12-04 to 2022-02-05
<p>General Metadata for Hull Springs Restored Wetland Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment and sensor can be found as text files with the file format of:</p> <pre><code>HS_wetland_DO_YYYY-MM-DD_metadata.txt HS_wetland_Depth_YYYY-MM-DD_metadata.txt HS_wetland_CT_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning. Details on how the data were cleaned and variables created can be found at in the cleaning scripts on Gitlab <a href="https://gitlab.com/leo147/leo/-/tree/master/lab_notebook/data_processing/cleaning_scripts">https://gitlab.com/leo147/leo/-/tree/master/lab_notebook/data_processing/cleaning_scripts</a>.</p> <p>File Created</p> <ul> <li>2021-06-16 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added general metadata for the pressure transducer and the CT sensor.</li> <li>2021-11-10 by KF - updated to include the depth calculations from the water level logger.</li> </ul> <p>Description</p> <p>These data are from the sampling station in the restored wetland at the Baliles Center for Environmetal Education at Hull Springs. The sensors are in the NE corner of the shallow pond portion of the restored wetland (38.119289, -76.667252).</p> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The specific at each site are:</p> <pre><code>* Water Temperature (dC) and Dissolved Oxygen (mg/l) are collected with a Onset HOBO U26-001 Dissolved Oxygen Logger * Water Temperature (dC) and Water Pressure (mmHg) are collected with an Onset HOBO U20-001-01 Water Level Logger * Water Temperature (dC) and Conductivity are collected with an Onset HOBO U24-001 Conductivity Logger * Air Temperature (dC) and Barometric Pressure (mmHg) are collected with an Onset HOBO U20-001-01 Water Level Logger mounted in the air next to the wetland.</code></pre> <p>The sensors are sampled every 15 minutes</p> <p>Measurement Parameters, units, and Variable Names</p> <pre><code>* date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS) * observation.DO, .CT, .press, or .BP - the incremental number of each observation from the DO, conductivity, water pressure, or barometric pressure sensor. * timestamp.DO, .CT, .press, or .BP - the data and time that the record was collected, as reported by the data logger (MM/DD/YY HH:MM:SS A/PM) from the DO, conductivity, water pressure, or barometric pressure sensor. * DO - the concentration of dissolved oxygen in the water (mg/L) * Temp.DO, .CT, .press, or .BP - the temperature (dC) from the DO, conductivity, water pressure, or barometric pressure sensor. * Pressure.press or .BP - the pressure recorded by the pressure transducer (kPa) on the water pressure or barometric pressure sensor. * Z - the depth of the water (cm). * Low_Range_CT - the conductivity read from 0 - 2500 uS/cm (uS/cm) * Full_Range_CT - the conductivity read from 0 - 15000 uS/cm (mmHg) * press.g.cm2 - the pressure from the water pressure sensor (g/cm^2) * BP.g.cm2 - the barometric pressure from the barometric pressure sensor (g/cm^2)</code></pre>
Baliles Center (Hull Springs) Aimes Creek Depth and Temperature Data from 2022-02-05 to 2022-03-08
<p>General Metadata for Hull Springs Dock-YSI Sampling Station</p> <p>Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <pre><code>HS_YSI_YYYY-MM-DD_metadata.txt HS_dock_pressure_trans_YYYY-MM-DD_metadata.txt</code></pre> <p>Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning.</p> <p>File Created</p> <ul> <li>2021-07-14 by KF</li> </ul> <p>File Modified</p> <ul> <li>2021-07-22 by KF - added metadata for pressure transducer</li> </ul> <p>Description</p> <p>These data are from the sampling station in Aimes Creek on the Camp House dock (38.125367, -76.659537).</p> <pre><code>* Physical and chemical water data are collected with a YSI EXO2 sonde. * Temperature (dC) and Pressure (KPa) are collected with an Onset HOBO U20-001-01-Ti Water Level Logger</code></pre> <p>All data are CC-BY and should be cited using the DOI available at <a href="https://zenodo.org/communities/leo/">https://zenodo.org/communities/leo/</a></p> <p>Station Specifics</p> <p>The sensors are sampled every 15 minutes</p> <p>Measurements Parameters, units, and Variable Names</p> <ul> <li>date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS)</li> <li>date.time.adj - the date and time that the pressure was measured adjusted to match the time that barometric pressure was collected. (YYYY-MM-DD HH:MM:SS)</li> <li>observation - the number of the observation.</li> <li>timestamp - the date and time as reported by the data logger (MM/DD/YY HH:MM:SS AM/PM)</li> <li>date - the date that the record was collected (MM/DD/YYYY)</li> <li>time - the time that the record was collected (HH:MM:SS)</li> <li>site_name - the ID name provided by the KOR software.</li> <li>unit_ID - the sonde identification number.</li> <li>user_ID - the user that created the sampling template.</li> <li>Temp_dC - the water temperature in degrees C.</li> <li>DO_perc - the dissolved oxygen percent saturation (%).</li> <li>DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%).</li> <li>DO_mg-L - the concentration of dissolved oxygen (mg/L).</li> <li>SPC_uS-cm - the specific conductance (uS/cm).</li> <li>C_uS-cm - the conductivity (uS/cm).</li> <li>nLFC_uS-cm</li> <li>TDS_mg-L - the total dissolved solids (mg/L).</li> <li>SAL_PSU - the salinity of the water (PSU).</li> <li>pH - the pH of the water.</li> <li>pH_mV - the millivolt measurement of the pH meter (mV).</li> <li>FNU - the turbidity of the water (FNU).</li> <li>TSS_mg-L - the total suspended solids (mg/L).</li> <li>BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU).</li> <li>BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L).</li> <li>Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU).</li> <li>Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L).</li> <li>fDOM_RFU - the fluorescent DOM fluorescence level (RFU).</li> <li>fDOM_QSU - the standardized fluorescent DOM concentration (QSU).</li> <li>Wiper_V - the voltage output of the wiper (V).</li> <li>Cabel_V - the voltage output of the cable (V).</li> <li>Batt_V - the voltage output of the internal batteries (V).</li> <li>Pressure - the pressure of the water above the pressure transducer (KPa)</li> <li>Temp - the water temperature reported by the pressure transducer (dC)</li> <li>press_mmHg - the pressure of the water above the pressure transducer (mm Hg)</li> <li>BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg)</li> <li>Z_press_trans - the depth of the water above the pressure transducer (cm)</li> <li>Z - the depth of the water above the sediments (cm)</li> </ul>
Earlier spring snowmelt drives arrowleaf balsamroot phenology in montane meadows
<p>Climate change is causing global shifts in phenology, altering when and how species respond to environmental cues such as temperature and the timing of snowmelt. These shifts may result in phenological mismatches among interacting species, creating cascading effects on community and ecosystem dynamics. Using passive warming structures and snow removal, we examined how experimentally increased temperatures, earlier spring snowmelt, and the poorly understood interaction between warming and earlier spring snowmelt affected flower onset, flowering duration, and maximum floral display of the spring flowering montane species, Arrowleaf Balsamroot (<em>Balsamorhiza sagittata</em>), over a seven-year period. Additionally, potential cumulative effects of treatments were evaluated over the study duration. The combination of heating with snow removal led to earlier flower onset, extended flowering duration, and increased maximum floral display. While there was year-to-year variation in floral phenology, the effect of heating with snow removal on earlier onset and maximum floral display strengthened over time. This suggests that short-term studies likely underestimate the potential for climate change to influence phenological plant traits. Overall, this research indicates that<em> Balsamorhiza sagittata</em>'s flowering onset responded more strongly to snow removal than to heating, but the combination of heating with snow removal allowed plants to bloom earlier, longer, and more profusely, providing more pollinator resources in spring. If warming and early snowmelt cause similar responses in other plant species besides<em> Balsamorhiza sagittata</em>, these patterns could mitigate phenological mismatches with pollinators by providing a wider window of time for interaction and resiliency in the face of change. This example demonstrates that a detailed understanding of how spring-flowering plants respond to specific aspects of predicted climatic scenarios will improve our understanding of the effects of climate change on native plant-pollinator interactions in montane ecosystems. Studies like this help elucidate long-term physiological effects of climate-induced stressors on plant phenology in long-lived forbs.</p>
Dual spring force couples yield multifunctionality and ultrafast, precision rotation in tiny biomechanical systems
<p>Small organisms use propulsive springs rather than muscles to repeatedly actuate high acceleration movements, even when constrained to tiny displacements and limited by inertial forces. Through integration of a large kinematic dataset, measurements of elastic recoil, energetic math modeling, and dynamic math modeling, we tested how trap-jaw ants (Odontomachus brunneus) utilize multiple elastic structures to develop ultrafast and precise mandible rotations at small scales. We found that O. brunneus develops torque on each mandible using an intriguing configuration of two springs: their elastic head capsule recoils to push and the recoiling muscle-apodeme unit tugs on each mandible. Mandibles achieved precise, planar, circular trajectories up to 49,100 radians/sec (470,000 rpm) when powered by spring propulsion. Once spring propulsion ended, the mandibles moved with unconstrained and oscillatory rotation. We term this mechanism "dual spring force couple" meaning that two springs deliver energy at two locations to develop torque. Dynamic modeling revealed that dual spring force couples reduce the need for joint constraints and thereby reduce dissipative joint losses, which is essential to the repeated use of ultrafast, small systems. Dual spring force couples enable multifunctionality: trap-jaw ants use the same mechanical system to produce ultrafast, planar strikes driven by propulsive springs and for generating slow, multi-degree of freedom mandible manipulations using muscles, rather than springs, to directly actuate the movement. Dual spring force couples are found in other systems and are likely widespread in biology. These principles can be incorporated into microrobotics to improve multifunctionality, precision, and longevity of ultrafast systems.</p>
Figs. 6 in PLATYLOMIA OPERCULATA DISTANT, 1913, A CICADA THAT TAKES WATER FROM HOT SPRINGS AND BECOMES VICTIM OF THE PEOPLE (RHYNCHOTA: CICADOMORPHA: CICADIDAE)
Figs. 6 to 9: Platylomia operculata Distant. Close-up of the "cicadas taking the waters". 6, "birds' eye" view of two males which have fallen on the rocky bed of the springs. 7, subfrontal view of one of the males drinking between damp stones. 8, frontal view of a male, its rostrum perpendicularly planted between wet stones; 9 (from VDO), in spite of the postclypeus being crushed by a supposed collision with a rock "during a badly calculated landing" this male drinks, the rostrum is kept on the lateral fringe of the spring near which the cicada alighted.
Fig. 5 in PLATYLOMIA OPERCULATA DISTANT, 1913, A CICADA THAT TAKES WATER FROM HOT SPRINGS AND BECOMES VICTIM OF THE PEOPLE (RHYNCHOTA: CICADOMORPHA: CICADIDAE)
Fig. 5: "Allegro ma non troppo"... Score common to all Platylomia operculata performers (= C.I.A., species Acoustic ID card: a, temporal oscillogram; b, average spectrum; c, spectrogram).
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.