Find research datasets worth reusing

opencc-by-4.0Nov 2005View details →

Figures 3–8. Fig. 3 in The species of Papilionidae and Pieridae (Lepidoptera) described by Cramer and Stoll and their putative type material in the Natural History Museum in London

Figures 3–8. Fig. 3. Papilio amosis Cramer (syntype). Fig. 4. Papilio amphimedon Cramer (syntype). Fig. 5. Papilio anchises Linnaeus (specimen with 'van Lennep' label). Fig. 6. Papilio arbates Stoll (syntype). Fig. 7. Papilio codrus Cramer (possible syntype). Fig. 8. Papilio deiphobus Linnaeus (specimen with 'van Lennep' label).

Pre-service and In-service Teachers' Views on Gamification [Dataset & Supplementary Materials]

Dataset, survey, and demographic information for Pre-service and In-service Teachers’ Views on Gamification.

Supplementary Material for "Enhancing Fluid Animation with Fine Detail"

Results for an upcoming publication. Work is based on the 3 referenced papers.  VideoAppendix1 relates to:   D. Morgenroth, D. Weiskopf, and B. Eberhardt, “Distributed vfx architecture for sph simulation,”Journal of WSCG, vol.21, no.3, pp.163-171, 2013, eprint:http://hdl.handle.net/11025/6986. VIdeoAppendix2 relates to: D. Morgenroth, D. Weiskopf, and B. Eberhardt, “Direct raytracing of a closed-form fluid meniscus,” The Visual Computer, vol.32, no.6-8,pp.791-800, 2016. doi:10.1007/s00371-016-1258-4. VideoAppendix3 relates to: D. Morgenroth, S. Reinhardt, D. Weiskopf, and B. Eberhardt, “Efficient 2d simulation on moving 3d surfaces,”Computer Graphics Forum, vol. 39, no.8, pp.27-38,2020.doi:10.1111/cgf.14098. More detailed description of the visuals can be found in the readme file.

Data Materials for Fortune Telling Studies: Positive Fortune Telling Enhances Men's Financial Risk Taking

We share the data materials for three studies and a meta-analysis on the effects of positive fortune telling on enhancing men's financial risk taking. A paper entitled as "Positive Fortune Telling Enhances Men’s Financial Risk Taking" was written up for publication.

opencc-by-4.0Jun 2021View details →

Revised supplementary material to "Fumarolic pathways were structurally controlled by a strike-slip fault system beneath the Bishop Tuff, Bishop, California"

Revised supplementary material to "Fumarolic pathways were structurally controlled by a strike-slip fault system beneath the Bishop Tuff, Bishop, California": Figure S1 Supplementary Images V.2.kmz Table S1 Fault Measurements V.2.csv Table S2 Joint Measurements.csv Table S3 Optimal Joints Model Solution.csv   Figure S1 Supplementary Images.kmz for use in Google Earth showing field photographs in geographic context. Figure S1 Supplementary Images.kmz contains all supplementary images (S1 to S12), locations and additional images of field photographs of the figures in the main text of the publication (Figures 3,5,7), additional photographs of fault kinematic indicators, sample localities, and some additional photographs. The order of figures in the manuscript changed, so figure numbers differ from the originally published version. Table S1 Fault Measurements.csv contains all measured fault surface orientations (strike and dip), their corresponding slickenline orientations (trend and plunge) and their locations (latitude and longitude in decimal degrees). Fault types were added to the data. Table S2 Joint Measurements.csv contains all measured orientations of joints as measured on a preserved joint wall (strike and dip), their locations (easting and northing in meters), and whether the joint was mineralized or not. No changes were made from the originally published version. Table S3 Optimal Joints Model Solution.csv contains the output to the model presented in the paper. This table was newly added to the revised version of the paper.

opencc-by-4.0Feb 2021View details →

Experimental investigation of composite materials for sliding friction dampers: data, plots, photos and videos of the tests

Folder DATA This folder contains the data acquired by testing the friction pads M1, M2, M3, M4 and M5 under the following loading protocols: <ul> <li>Linear static loading (M);</li> <li>Cyclic loading with constant amplitude (CA);</li> <li>Cyclic loading with decreasing amplitude at low rate (DA);</li> <li>Cyclic loading with increasing amplitude at low rate (IA);</li> <li>Cyclic loading with increasing amplitude at moderate rate (IA-H);</li> <li>Cyclic loading with increasing amplitude at high rate (IA-HH);</li> <li>Pulse-like loading protocol (PL);</li> <li>Mainshock-aftershock protocol (MS-AS): mainshock (MS), first aftershock (AS1) and second aftershock (AS2).</li> </ul> The data include: <ul> <li>Time: time (unit: second);</li> <li>F: axial force experienced by the sliding friction damper (unit: kN);</li> <li>N_bolt: bolt preload (unit: kN);</li> <li>mu: friction coefficient of the considered pad (unit: dimensionless);</li> <li>delta: axial displacement experienced by the sliding friction damper (unit: mm);</li> <li>Cum. delta: total cumulative displacement experienced by the sliding friction damper (unit: mm);</li> <li>Cum. E: total cumulative energy dissipated by the sliding friction damper (unit: kJ);</li> <li>max Tin: maximum temperature tracked close to the sliding interface (unit: Celsius);</li> <li>Tout: temperature tracked at the surface of the inner slotted plate (unit: Celsius).</li> </ul>  The data are organized as follows: <ul> <li>Folder T100</li> </ul> This folder contains the data acquired under the linear static loading protocol (M) for a tightening torque of 100 Nm. Each EXCEL file T100_M_Y saved in the folder T100 contains the data obtained by testing the friction pad Y (Y = M1, M2, M3, M4, M5) under the loading protocol M. <ul> <li>Folder T200</li> </ul> This folder contains the data acquired under the linear static loading protocol (M) for a tightening torque of 200 Nm. Each EXCEL file T200_M_Y saved in the folder T200 contains the data obtained by testing the friction pad Y (Y = M1, M2, M3, M4, M5) under the loading protocol M. <ul> <li>Folder Fs150</li> </ul> This folder contains the data acquired for an expected slip load of 150 kN. Each subfolder Fs150_X contains the data obtained under the loading protocol X (X = M, CA, DA, IA, IA-H). Each EXCEL file Fs150_X_Y saved in the subfolder Fs150_X contains the data obtained by testing the friction pad Y (Y = M1, M2, M3, M4, M5) under the loading protocol X. <ul> <li>Folder Fs300</li> </ul> This folder contains the data acquired for an expected slip load of 300 kN. Each subfolder Fs300_X contains the data obtained under the loading protocol X (X = M, CA, DA, IA, IA-H, IA-HH, PL, MS, AS1, AS2). Each EXCEL file Fs300_X_Y saved in the subfolder Fs300_X contains the data obtained by testing the friction pad Y (Y = M1, M2, M3, M4, M5) under the loading protocol X. Folder PHOTOS This folder contains the following photos: <ul> <li>Folder 01_FrictionDamper: photos of the sliding friction damper and its components.</li> <li>Folder 02_Instrumentation: photos of the instrumentation used for the data acquisition during the experimental campaign.</li> <li>Folder 03_FrictionPads: <ul> <li>Subfolder BeforeTesting: photos of the friction pads before the experimental campaign.</li> <li>Subfolder AfterTesting: photos of the friction pads at the end of each loading protocol. The photo Fs150vs300_X_Y shows the condition of the pad Y (Y = M1, M2, M3, M4, M5) at the end of the loading protocol X (X = M, CA, DA, IA, IA-H, IA-HH, PL, MS, AS1, AS2) performed for an expected slip load of 150 kN and 300 kN (the pads shown at the top of each photo are those tested for an expected slip load of 150 kN). Similarly, the photo Fs300_X_Y shows the condition of the pad Y at the end of the loading protocol X performed for an expected slip load of 300 kN.</li> </ul> </li> <li>Folder 04_Tests: photos taken from the east and north side of the sliding friction damper during the loading protocols that caused the fracture of the pads <ul> <li>Subfolder Fs150: photos taken during the tests conducted for an expected slip load of 150 kN. Each folder Fs150_X_Y contains the photos taken by testing the pad Y (Y = M1, M2, M4, M5) during the loading protocol X (X = CA, DA, IA, IA-H).</li> <li>Subfolder Fs300: photos taken during the tests conducted for an expected slip load of 300 kN. Each folder Fs300_X_Y contains the photos taken by testing the pad Y (Y = M1, M2, M4, M5) during the loading protocol X (X = CA, IA, IA-H). A video was recorded live during the loading protocols IA-HH, PL, MS, AS1 and AS2 (see folder VIDEOS).</li> </ul> </li> </ul> Folder PLOTS This folder contains the following MATLAB plots: <ul> <li>Force-Disp: axial force – axial displacement response of the sliding friction damper;</li> <li>Preload-CumDisp: bolt preload as a function of the total cumulative displacement experienced by the sliding friction damper;</li> <li>FrictionCoeff-CumDisp: friction coefficient of the considered pad as a function of the total cumulative displacement experienced by the sliding friction damper;</li> <li>Temp-CumDisp: rise in temperature as a function of the total cumulative displacement experienced by the sliding friction damper (the temperature values reported for the expected slip load of 150 kN correspond to “max Tin”, whereas those reported for the expected slip load of 300 kN correspond to “Tout”);</li> <li>FrictionCoeff-LoadingHistoryEffect: friction coefficient of the considered pad as a function of the total cumulative displacement experienced by the sliding friction damper under different loading protocols;</li> <li>FrictionCoeff-RateEffect: friction coefficient of the considered pad as a function of sliding velocity experienced by the sliding friction damper under different loading protocols;</li> <li>FrictionCoeff-TempEffect: friction coefficient of the considered pad as a function of the rise in temperature tracked during different loading protocols;</li> <li>FrictionCoeff-PressureDependency: mean and standard deviation of the friction coefficient of the considered pad obtained for different expected slip loads and loading protocols;</li> <li>FrictionCoeffStaticDynamic-PressureDependency: mean of the static and dynamic friction coefficient of the considered pad obtained for different expected slip loads and loading protocols.</li> </ul> The MATLAB plots are organized as follows: <ul> <li>Folder T200</li> </ul> The MATLAB plots saved in this folder illustrate the data obtained by testing the friction pads M1, M2, M3, M4 and M5 under the linear static loading protocol (M) for a tightening torque of 200 Nm. <ul> <li>Folder Fs150 and Fs300</li> </ul> The MATLAB plots saved in this folder illustrate the data obtained by testing the friction pads M1, M2, M3, M4 and M5 under the considered loading protocol (M, CA, DA, IA, IA-H, IA-HH, PL, MS-AS) for an expected slip load of 150 kN and 300 kN. Folder VIDEOS This folder contains the following videos: <ul> <li>Folder T100: videos created from the photos taken during the tests conducted for a tightening torque of 100 Nm under the linear static loading protocol (M). The videos T100_M_Y_East and T100_M_Y_North show the test conducted on the pad Y (Y = M1, M2, M3, M4, M5) from the east and north side of the sliding friction damper respectively.</li> <li>Folder T200: videos created from the photos taken during the tests conducted for a tightening torque of 200 Nm under the linear static loading protocol (M). The videos T200_M_Y_East and T200_M_Y_North show the test conducted on the pad Y (Y = M1, M2, M3, M4, M5) from the east and north side of the sliding friction damper respectively.</li> <li>Folder Fs150: videos created from the photos taken during the tests conducted for an expected slip load of 150 kN. The videos Fs150_X_Y_East and Fs150_X_Y_North show the loading protocol X (X = M, CA, DA, IA, IA-H) applied to the pad Y (Y = M1, M2, M3, M4, M5) from the east and north side of the sliding friction damper respectively.</li> <li>Folder Fs300: videos created from the photos taken during the tests conducted for an expected slip load of 300 kN. The videos Fs300_X_Y_East and Fs300_X_Y_North show the loading protocol X (X = M, CA, DA, IA, IA-H) applied to the pad Y (Y = M1, M2, M3, M4, M5) from the east and north side of the sliding friction damper respectively. The videos obtained for the loading protocols IA-HH, PL, MS, AS1 and AS2 were recorded live during each test.</li> </ul>

Supplementary material for: RSAT variation-tools: An accessible and flexible framework to predict the impact of regulatory variants on transcription factor binding

Supplementary Material for the Article Santana-Garcia, W., Rocha-Acevedo, M., Ramirez-Navarro, L., Mbouamboua, Y., Thieffry, D., Thomas-Chollier, M., Contreras-Moreira, B., van Helden, J., Medina-Rivera, A., 2019. RSAT variation-tools: An accessible and flexible framework to predict the impact of regulatory variants on transcription factor binding. Comput. Struct. Biotechnol. J. 17, 1415–1428.

opencc-by-4.0Oct 2021View details →

Supplementary Material: Assessment of Environmental Pollution and Human Exposure to Pesticides by Wastewater Analysis in a Seven-Year Study in Athens, Greece

Supplementary Material

opencc-by-4.0Oct 2021View details →

Supplemental material for "Computational study of the dissolution of cellulose into single chains: the role of the solvent and agitation"

Input-scripts and data-files from the Cellulose article "Computational study of the dissolution of cellulose into single chains: the role of the solvent and agitation" by Bering, E., Torstensen, J., Lervik, A., Wijn, A. S. # Content The folder "glycamstructures" contains the output from GLYCAM carbohydrate builder with force-field parameters, coordinates and topology of a single chain of cellulose composed of 4 cellobiose units. The folder "intermol" contains the output from the software Intermol were the content of "glycamstructures" is translated into the lingo of LAMMPS. The folder "packmol" contains input files for the software Packmol, which was used for creating coordinate-files for solvated systems of cellulose with water and cellulose with the solvent mixture. (The bash-script clean.sh fixes the formatting of the .xyz-files such that LAMMPS can read it.) The folder "36bundle" contains input files for creating the initial configuration of the bundle with 36 chains in a maze configuration, namely 36bundle.sh reads 1chain.xyz to make the coordinate file 36bundle.xyz. Further, nvt00.in is the initial LAMMPS script for slowly starting up this system with the NVT-ensemble, which reads system information from the LAMMPS-datafile chain.36bundle, cellulose parameters from the LAMMPS-datafile data.cellulose_nohybrid and coordinates from 36bundle.xyz. nvt01.in and nvt02.in continues sequentially, resulting in the configuration stored in the LAMMPS data-file chain.nvt02. The folder "36bundle_mix" continues from 36bundle by first adding the solvent mixture with coordinates from Packmol in the file 36bm.xyz and slowly starting up in the NVT-ensemble with nvt00.in, with force-field parameters in data.cellulose.in, data.water_spce.in, data.naoh.in and data.urea.in, with charges and connectivity of the solvent molecules in the files water_spce.txt, naoh.txt and urea.txt. The LAMMPS script npt00.in continues with the NPT-ensemble, which is continued with npt01.in etc., resulting in the configuration stored in the LAMMPS data-file chain.npt06. These systems can be continued with length- or force-controlled oscillatory stretching/compression with osc_length.in and osc_force.in respectively, which was used to make the configurations stored in the LAMMPS data-files chain.osc_length4 and chain.osc_force4. Similarly, the folder "36bundle_water" continues from 36bundle by first adding the water with coordinates from Packmol in the file 36bw.xyz and slowly starting up in the NVT-ensemble with nvt00.in, with force-field parameters in data.cellulose.in and data.water_spce.in, with charges and connectivity of the water molecules in the file water_spce.txt. Again, these systems can be continued with length- or force-controlled oscillatory stretching/compression with osc_length.in and osc_force.in respectively, which was used to make the configurations stored in the LAMMPS data-files chain.osc_length4 and chain.osc_force4.

opencc-by-4.0Dec 1977View details →

In diesem Zusammenhang möchte ich auf einen — in Europa wohl bisher nicht beachteten — Beitrag zur Lycopersicon-Taxonomie aus Südamerika selbst hinweisen. Es handelt sich um den ersten Botaniker Argentiniens, Gaspar Xuarez. Er beschäftigte sich im Jahr 1780 auch mit Tomaten. Hierbei verglich er Landsorten der Eingeborenen, u. a. die in der Guarani-Sprache "Caä camamab" genannten, mit den damals von Tournefort oder Linne klassifizierten Arten und stellte fest, daß deren Typus sich von seinem Material beträchtlich unterschied. Wegen der birnenförmigen Frucht nannte Xuarez seine Formen "pyriforme" und beschrieb sie später zusammen mit Gillie als Solanum (= Lycopersicon) pyriforme. (F. Gillie und Gaspar Xuarez, 1789:,Osservacioni fisologiche spora alcune piante esotiche introdotte in Roma4). Die Publikation ist deswegen in Italien erschienen, weil die Autoren dort nach Vertreibung der Jesuiten aus Südamerika zeitweilige Zuflucht gefunden hatten. Es scheint, daß sie auch Samen nach Italien mitgebracht und dort vermehrt haben. Dieser wenig beachtete Text ist meiner Meinung nach der erste Hinweis auf den Ursprung der "San Marzano = pomo d'oro" Italiens. Diese bimenförmige, auch heute noch im Mittelmeerraum viel kultivierte Tomatenvarietät wäre demnach von argentinischer Herkunft, und möglicherweise schon vor 200 Jahren durch Xuarez in Italien eingeführt worden. Von dort hat sich die birnenförmige (var. pyriforme) Sorte "San Marzano" schließlich als geschätzte Konserventomate über die ganze Welt verbreitet. in IV. Tropisches Obst und Gemüse

In diesem Zusammenhang möchte ich auf einen — in Europa wohl bisher nicht beachteten — Beitrag zur Lycopersicon-Taxonomie aus Südamerika selbst hinweisen. Es handelt sich um den ersten Botaniker Argentiniens, Gaspar Xuarez. Er beschäftigte sich im Jahr 1780 auch mit Tomaten. Hierbei verglich er Landsorten der Eingeborenen, u. a. die in der Guarani-Sprache "Caä camamab" genannten, mit den damals von Tournefort oder Linne klassifizierten Arten und stellte fest, daß deren Typus sich von seinem Material beträchtlich unterschied. Wegen der birnenförmigen Frucht nannte Xuarez seine Formen "pyriforme" und beschrieb sie später zusammen mit Gillie als Solanum (= Lycopersicon) pyriforme. (F. Gillie und Gaspar Xuarez, 1789:,Osservacioni fisologiche spora alcune piante esotiche introdotte in Roma4). Die Publikation ist deswegen in Italien erschienen, weil die Autoren dort nach Vertreibung der Jesuiten aus Südamerika zeitweilige Zuflucht gefunden hatten. Es scheint, daß sie auch Samen nach Italien mitgebracht und dort vermehrt haben. Dieser wenig beachtete Text ist meiner Meinung nach der erste Hinweis auf den Ursprung der "San Marzano = pomo d'oro" Italiens. Diese bimenförmige, auch heute noch im Mittelmeerraum viel kultivierte Tomatenvarietät wäre demnach von argentinischer Herkunft, und möglicherweise schon vor 200 Jahren durch Xuarez in Italien eingeführt worden. Von dort hat sich die birnenförmige (var. pyriforme) Sorte "San Marzano" schließlich als geschätzte Konserventomate über die ganze Welt verbreitet.

openmit-licenseDec 2018View details →

BLE RSS measurements database and supporting materials

BLE RSS measurements database and supporting materials The database contains over 4,700 fingerprints of measurement from Bluettoth Low Energy (BLE) beacons. The beacons were Accent System's IBKS105, and the RSS were measured in two zone from the Universitat Jaume I, in Spain. One zone is an area among bookshelves that belong to the university library, for which beacons were configured to advertise at the -12 dBm power and the collection was performed using three smartphones: aBQ Aquaris X5 plus, a Samsung Galaxy S6 (SM-G920F) and a Samsung Galaxy A5 2017 (SM-A520F). The other zone is an office space area, for which beacons were configured at -4dBm, -12 dBm, and -20dBm and the collection was performed using the only Samsung Galaxy A5 smartphone. The supporting material includes Matlab® scripts to load and filter the desired data, and provides examples that depict common challenges for BLE RSS-based indoor positioning. The supporting material also includes the beacon deployment and the obstacles local coordinates. Citation request: Mendoza-Silva, G.M.; Matey-Sanz, M.; Torres-Sospedra, J.; Huerta, J. BLE RSS Measurements Dataset for Research on Accurate Indoor Positioning. Data 2019, 4, 12 Mendoza-Silva, G.M.; Matey-Sanz, M.; Torres-Sospedra, J.; Huerta, J. "BLE RSS meaurements database and supporting materials". Zenodo repository, DOI 10.5281/zenodo.1618692

opencc-by-4.0Dec 2018View details →

Use and sharing of raw data in the Journal Citation Reports' Emergency Medicine Category: Metrics and Journals including supplementary material classification sorted by quartile of the JCR emergency medicine category.

Raw data belonged to the study of use and sharing of raw research data in the Journal Citation Reports' Emergency Medicine Category.

opencc-by-4.0Oct 2022View details →

Supplementary material for "Phase Retrieval from overexposed PSF" article

Supplementary material for  "Phase Retrieval from overexposed PSF" article, submitted to Optics Communications (http://dx.doi.org/10.2139/ssrn.4267855). The pdf files present the results of the phase retrieval task as described in Sections 5 and 6 of the article and provide an easy-to-navigate tool for browsing through the parameter space of the simulation and of the algorithm. Click on the parameter values in the right-hand side of the browser page to navigate to the corresponding result.

opencc-by-4.0Sep 2022View details →

Data, code and supplementary material for "A data integration framework for spatial interpolation of temperature observations using climate model data"

Each zipped file contains code and data to reproduce the results in the paper and supplementary material. The Cyprus folder contains also the files to run the model, as well as the associated results. The Morocco folder only contains the results and the code used to manipulate it.

Supplementary material to "Habitat detection, habitat choice copying, or mating benefits: what drives conspecific attraction in a nomadic songbird?"

Abstract <ol> <li>Conspecific attraction during habitat selection is common among animals, but the ultimate (i.e., fitness-related) reasons for this behavior often remain enigmatic.</li> <li>We aimed to evaluate the following three hypotheses for conspecific attraction during the breeding season in male Wood Warblers (Phylloscopus sibilatrix): the habitat detection hypothesis, the habitat choice copying hypothesis, and the female preference hypothesis. These hypotheses make different predictions with respect to the relative importance of social and non-social information during habitat assessment, and whether benefits accrue as a consequence of aggregation.</li> <li>We tested the above hypotheses using a combination of a two-year playback experiment, spatial statistics and mate choice models.</li> <li>The habitat detection hypothesis was the most likely explanation for conspecific attraction and aggregation in male Wood Warblers, based on the following results: 1) males were attracted to conspecific song playbacks, but fine-scale habitat heterogeneity was the better predictor of spatial patterns in the density of settling males; 2) male pairing success did not increase, but instead slightly decreased, as connectivity with other males (i.e., the number and proximity of neighboring males) increased.</li> <li>Our study highlights how consideration of the process by which animals detect and assess habitat, together with the potential fitness consequences of resulting aggregations, are important for understanding conspecific attraction and spatially clustered distributions.</li> </ol>

Simulated industrial CT dataset for deep learning with dual-energy tomograms and ground truth material maps for copper and iron

We use this dataset for training and evaluation of a deep learning model to discriminate multi-material systems with X-ray CT. The dataset consists of: <ul> <li>inputs: dual-energy tomograms as binary files without a header (tensor shape for numpy: 2x128x128 @float32) <ul> <li>simulated spectra are 250kVp and 450kVp both prefiltered using 2mmCuSn</li> </ul> </li> <li>outputs: the material maps a.k.a. ground truths for the training (same shape as inputs) <ul> <li>sampled with a delaunay algorithm and randomly filled with iron and copper fractions</li> </ul> </li> </ul> The dataset is normalized to [0, 1], so you have to multiply by the mass densities of copper and iron to obtain effective fractions in g/cm^3.

Reconciling the onshore/offshore stratigraphy of the Canning Basin and implications for petroleum prospectivity supplementary material

In this paper, figures 4 and 6 were made to a smaller scaler for improved visuals; however, this resulted in the extent of some units being left out of the figure. The supplementary material here includes the full extent of figures 4 and 6 so readers can identify where each unit was mapped in this study.

Supplementary materials (processed data) for paper "Electrical signal transfer characteristics of mycelium-bound composites and fungal fruiting bodies."

Processed data for paper "Electrical signal transfer characteristics of mycelium-bound composites and fungal fruiting bodies."

Supplementary materials (raw data) for paper "Electrical signal transfer characteristics of mycelium-bound composites and fungal fruiting bodies"

Raw data (B&K 891, C60 and VNA instruments) for the paper "Electrical signal transfer characteristics of mycelium-bound composites and fungal fruiting bodies"

Meta multiverse replication material

Archived version (zip-file) of data, code and supplemental material for the publication "Meta-Analyzing the Multiverse: A Peek Under the Hood of Selective Reporting", published by Psychological Methods. A preprint is available at https://psyarxiv.com/43yae/ and the original (non-archived) material repository is available at https://osf.io/j8yg2/.