Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
6,410
datasets available to search
ShareScore release 0.9.0
Dataset results
6,410 results for “results”
Host-specificity in Scelionid parasitoids: Arrestment, competition, and egg electrophysiology results
<p>This archive contains the raw data from a series of experiments with Trissolcus basalis and Trissolcus oenone to better understand the chemical basis mediating differences in host-specificity between these parasitoids. First, we compared the searching behaviour of T. basalis and T. oenone in open arena arrestment bioassays contaminated with footprint compounds from Nezara viridula and Cuspicona simplex. Trissolcus basalis spent four times longer searching for N. viridula than C. simplex, while T. oenone spent four times longer searching for C. simplex than N. viridula. We then conducted competition experiments to assess factors important to determining the outcomes of extrinsic and intrinsic contests between these parasitoids when they are simultaneously exposed to C. simplex egg masses. Trissolcus oenone, was the superior competitor in extrinsic and intrinsic contests. Finally, we recorded the antennal responses of T. basalis to egg extracts of N. viridula to tentatively identify potential contact kairomones used by this parasitoid to recognise and accept hosts.</p>
Tensile test results for 3D printed unidirectional composites reinforced with continuous fibres
Open the record for dataset details and reuse information.
Analysis of heme and iron influence on Porphyromonas gingivalis A7436 and ATCC 33277 strains genes expression (microarray results)
<p>The aim of this study was to analyze phenotypic differences between <i>P. gingivalis</i> more virulent A7436 and less virulent ATCC 33277 (33277) strains. The analysis comprised the influence of heme and iron on <i>P. gingivalis</i> gene expression. </p><p><i>P. gingivalis</i> A7436 and 33277 strains were cultured in basal medium (3% trypticase soy broth and 0.5% yeast extract), supplemented with 3.6 mM L-cysteine hydrochloride, and 0.5 mg/l menadione, in anaerobic conditions (80% N2, 10% H2 and 10% CO2). To generate heme and iron-limited conditions, the medium was supplemented with 0.16 mM of the iron chelator 2,2-dipyridyl (DIP conditions). To generate heme and iron-rich conditions, the medium was supplemented with 0.0077mM hemin chloride (Hm conditions). Three sample replicates of A7436 and 33277 strains were grown in Hm or DIP conditions for 20 hours. RNA isolation and microarray analysis were performed in IMGM laboratories (Martinsried, Germany), as described by Śmiga et al. (2023).</p><p>The online tool eArray (http://earray.chem.agilent.com/; Agilent Technologies, Santa Clara, CA, USA) was used to design an Agilent Custom <i>Porphyromonas gingivalis</i> A7436 Gene Expression Microarray (8×15K format). Probes were prepared based on <i>P. gingivalis</i> transcriptome information derived from the NCBI reference sequence NZ_CP011995.1. Total RNA isolation, RNA quantity, and quality were determined as described by Curaszkiewicz et al. 2014. For internal labeling control, the total RNA was spiked with <i>in vitro </i>synthesized polyadenylated transcripts (One-Color RNA Spike-In Mix; Agilent Technologies). Subsequently, samples were reverse transcribed into cDNA and then converted into cyanine-3-labeled complementary RNA (cRNA) with Low Input Quick-Amp Labeling Kit One-Color (Agilent Technologies). For microarray hybridization, a Gene Expression Hybridization Kit (Agilent Technologies) was used. Labeled cRNA was hybridized for 17 hours at 65℃ on Agilent Custom GE 8×15K Microarrays, washed according to the manufacturer's protocol, and dried with acetonitrile (Sigma-Aldrich). The fluorescence of samples was detected with Scan Control A.8.4.1 software (Agilent Technologies) on the Agilent DNA Microarray Scanner (Agilent Technologies) and extracted from the images using Feature Extraction 10.7.3.1 software (Agilent Technologies). For data analysis, Feature Extraction 10.7.3.1 (Agilent Technologies), GeneSpring GX 13.1.1 (Agilent Technologies), and Excel 2010 (Microsoft, Redmond, WA, USA) were used. For statistical analysis, Welch's approximate <i>t</i>-test was used. Differences in gene expression are shown as fold change values (FC). The average was calculated from the normalized signal values and they were transformed from the log2 to the linear scale. Increases and decreases in gene expression are shown as positive and negative numbers, respectively. The fold change in gene expression was considered significant for FC ≥ 2 or FC ≤ -2 and <i>P</i>-value ≤ 0.05</p><ul><li>Ciuraszkiewicz J, Śmiga M, Mackiewicz P, Gmiterek A, Bielecki M, Olczak M, Olczak T. 2014. Fur homolog regulates <i>Porphyromonas gingivalis </i>virulence under low-iron/heme conditions through a complex regulatory network. Mol Oral Microbiol 29:333-353. doi: 10.1111/omi.12077.</li><li>Śmiga M, Ślęzak P, Olczak T. 2023. Comparative analysis of <i>Porphyromonas gingivalis</i> A7436 and ATCC 33277 strains reveals differences in the expression of heme acquisition systems. Microbiol Spectr (revised manuscript under revision).</li></ul>
Simulated results from an agent-based model examining inequality and innovation in social networks
<p>Theories of innovation often balance contrasting views that either smart people create smart things or smartly constructed institutions create smart things. While population models have shown factors including population size, connectivity, and agent behavior as crucial for innovation, few have taken the individual-central approach seriously by examining the role individuals play within their groups. To explore how network structures influence not only population-level innovation but also performance among individuals, we studied an agent-based model of the Potions Task, a paradigm developed to test how structure affects a group's ability to solve a difficult exploration task. We explore how size, connectivity, and rates of information sharing in a network influence innovation and how these have an impact on the emergence of inequality in terms of agent contributions. We find, in line with prior work, population size has a positive effect on innovation, but that large and small populations perform similarly per capita; that many small groups outperform fewer large groups; that random changes to structure have few effects on innovation; and that the highest performing agents tend to occupy more central network positions. Moreover, we show that every network factor which facilitates innovation leads to a proportional increase in inequality of performance, creating "genius effects" among otherwise "dumb" agents in both idealized and real-world networks.</p>
Sentiment study of the digitalization - survey results
<p>Survey results on sentiment conducted in Poland.</p>
Dataset for plots and results in manuscript: "Reliance on fossil fuels increases during extreme temperature events in the continental United States"
<p>These are the dataset for plots and results in the manuscript titled "Reliance on fossil fuels increases during extreme temperature events in the continental United States".</p><p>Figure 1,2,3,4,5 are the dataset used for analysis and plotting the figures in the manuscript.</p><p>Other dataset are the 34 years' air temperature and population-weighted air temperature thresholds for detecting extreme temperature events in each U.S. states. For example, Ta_threshold(1990-2023)_99th_percentiles.csv is the 99th percentiles for each U.S. states.</p><p>Any questions and further assitance or collaborations are welcome to contact through: wz2481@columbia.edu, happystillwaterzhao@gmail.com</p><p> </p><p> </p>
Results of long-slit spectral observations of Arp263
<p>Long-slit spectral data of Arp263 along 3 position angles (PA=256, 289, 318) taken with BTA SAO RAS. The folders names correspond to the position angle of the spectral cut. Each folder contains reduced spectra (sum_abs.fts), error files (err_sum_abs.fts) and the map which corresponds to the slit situated vertically in the image in the pixel given as 'SLITPOS' in the header of the firs-file. </p>
Sampling results for InterDiff and other baseline methods
<p>Sampling results for evaluating the Interactions recovering accuracy of InterDiff and baseline methods</p>
Model version, input data, results, and processing scripts for the Speizer et al. zero emissions transport paper
<p>Includes the files needed to run the GCAM scenarios, analyze the outputs, and produce the figures for the Speizer et al. zero emissions transport paper.</p>
Orthophotos and 2D hydraulic modelling results used for habitat suitability modelling of the River Inn section (river km 35.3-48) in SE Germany
<p>The aerial RGB picture acquisition was performed on October 7 (bypass channel) and 11 (side channel) 2022 using a DJI-Matrice 210 V2 RTK drone. For the image acquisition, the drone mounted the DJI Zenmuse X5S RGB camera. The flight was realized at an altitude of about 120 m, ensuring a lateral and longitudinal overlap of the images of about 80%. Gound Control Points (GCPs) have been disposed along the study site, and their position georeferenced using a Emlid Reach RS2 RTK GPS system. After data collection, an RGB orthomosaic with a spatial resolution of 25 cm was generated, using PIX4Dmapper v4.7.5 (www.pix4d.com).</p><p>The hydrodynamic simulations were performed with the freeware software BASEMENT v3.2 (https://basement.ethz.ch), which solves the 2D shallow-water equations using a finite volume approach over two-dimensional unstructured meshes. Computational meshes were created using the QGIS plugin BASEmesh 2, with spatially varying element sizes, which were set to be finer in areas expected to be suitable for spawning and as nursery grounds, or when needed to more accurately represent the local morphological complexity.</p>
CAIRT/IASI-NG/CAIRT+IASI-NG FL2S results of Case Study Scenario 3 for limb-nadir application
<p>Results of the fast level-2 simulator (FL2S) for Case Study Scenarios 3 (only CO and PAN files) for limb-nadir application. The files contain altitude-time cross-sections of atmospheric parameters along simulated CAIRT-orbits. The variable extensions denote the original field ('_ori'), the application of the averaging kernel ('_ak') and additional application of noise ('_aknoi') for CAIRT alone, IASI-NG alone, and the combined product CAIRT+IASI-NG. </p>
Smoother: a unified and modular framework for incorporating structural dependency in spatial omics data: intermediate results
<p>This directory contains all intermediate results generated in the "Smoother: a unified and modular framework for incorporating structural dependency in spatial omics data" for reproducibility purpose. Associated scripts are available at https://github.com/JiayuSuPKU/Smoother_paper. Raw and processed data can be downloaded at https://zenodo.org/records/10223862.</p><p>Note that some intermediate results and figures in the notebooks may not be exactly the same as those in the paper due to the randomness in some analysis steps, but should be very close.</p>
Molecular dynamics results of the complex 3CLpro allosteric groove with compound 5
<p>Molecular dynamics results of the complex 3CLpro allosteric groove with compound <strong>5</strong>. The protein structure is shown in gray and the compound <strong>5</strong> is shown in magenta.</p>
Photoactivation of the Orange Carotenoid Protein Requires Two Light-Driven Reactions Mediated by a Metastable Monomeric Intermediate – Absorption Spectra and Global Analysis Results, Molecular Dynamics Simulations
<p>Time-resolved absorption and molecular dynamics trajectory datasets associated with: Rose, J. B.; Gascón, J. A.; Sutter, M.; Sheppard, D. I.; Kerfeld, C. A.; Beck, W. F. Photoactivation of the Orange Carotenoid Protein Requires Two Light-Driven Reactions Mediated by a Metastable Monomeric Intermediate. <i>Phys. Chem. Chem. Phys.</i> <strong>2023</strong>, DOI: 10.1039/d3cp04484j.</p>
PATTERN Survey Results on the perception of existing learning opportunities for reseachers on Open RRI
<p>From March to April 2023 PATTERN launched a Survey to explore the perception of and existing learning opportunities for reseachers on Open RRI.</p>
Model America - Arizona extract from ORNL's AutoBEM - (Archetypes with simulation results)
<p>Oak Ridge National Laboratory (ORNL) has developed the Automatic Building Energy Modeling (AutoBEM) software suite to process multiple types of data, extract building-specific descriptors, generate building energy models, and simulate them on High Performance Computing (HPC) resources. For more information, see AutoBEM-related publications (<a href="https://bit.ly/AutoBEM">bit.ly/AutoBEM</a>).</p> <p>Two sets of data are provided for 2,555,153 buildings located within the boundary of Arizona in the United States:</p> <ol> <li><strong>Data (420KB *.csv) - Arizona 527 building archetypes based on different Climate Zones (2B-136, 3B-133, 4B-128, 5B-130) with simulation results.</strong></li> <li><strong>Models (38.8MB *.zip by Climate Zone) – OpenStudio and EnergyPlus building energy models named according to ID.</strong></li> </ol> <p> </p> <p>This data is made free and openly available in hopes of stimulating any simulation-informed use case. Data is provided as-is with no warranties, express or implied, regarding fitness for a particular purpose. We wish to thank our sponsors which include Oak Ridge National Laboratory (ORNL), U.S. Dept. of Energy’s (DOE) Building Technologies Office (BTO), Office of Electricity (OE), and Biological and Environmental Research (BER).</p>
Test results from quasi-static impact tests over SMC materials reinforced with glass fibre (ramdom and textile)
<p>Test results from quasi-static impact tests over SMC materials with structural properties conceived for automotive applications, reinforced with glass fibre (samples with ramdom distribution of fibres and samples reinforced with GF textile)</p>
Results from DSC analysis over glass fibre reinforced SMC (50009092 grade by Menzolit supplier)
<p>Results from DSC analysis over glass fibre reinforced SMC automotive grade (50009092 grade provided by Menzolit supplier)</p>
Results from DSC analysis over glass fibre reinforced SMC (50007150 grade by Menzolit supplier)
<p>Results from DSC analysis over glass fibre reinforced SMC for automotive applications (50007150 grade provided by Menzolit supplier)</p>
Model America - Summer 2020 Arizona Building Energy Simulation Results from ORNL's AutoBEM
<p>Oak Ridge National Laboratory (ORNL) has developed the Automatic Building Energy Modeling (AutoBEM) software suite to process multiple types of data, extract building-specific descriptors, generate building energy models, and simulate them on High Performance Computing (HPC) resources. For more information, see AutoBEM-related publications (<a href="https://bit.ly/AutoBEM">bit.ly/AutoBEM</a>).</p> <p>Data is provided for 2,555,152 buildings located within the boundary of Arizona in the United States:</p> <p><strong>Data (1.48GB *.csv) - Arizona 2,555,152 building information data with simulation results separated by county. (Simulation results are for June 1st-August 31st, 2020)<br></strong></p> <p><strong>Building Information Data Fields:</strong></p> <ul> <li>ID</li> <li>CZ</li> <li>Centroid</li> <li>State_Abbr</li> <li>Footprint2D</li> <li>Height,Area2D</li> <li>BuildingType</li> <li>NumFloors</li> <li>Area</li> <li>Standard</li> <li>NumWalls</li> <li>WWR_surfaces</li> </ul> <p><strong>Energy Simulation Data Fields:</strong></p> <ul> <li>Electricity_Facility[kBTU]</li> <li>NaturalGas_Facility[kBTU]</li> <li>Heating_Electricity[kBTU]</li> <li>Cooling_Electricity[kBTU]</li> <li>Heating_NaturalGas[kBTU]</li> <li>Heating_Total[kBTU]</li> <li>WaterSystems_Electricity[kBTU]</li> <li>Lighting_Electricity[kBTU]</li> <li>Equipment_Electricity[kBTU]</li> <li>Fans_Electricity[kBTU]</li> <li>Pumps_Electricity[kBTU]</li> <li>HeatRejection_Electricity[kBTU]</li> <li>HeatRecovery_Electricity[kBTU]</li> <li>Surface_Outside_Face_Heat_Emission[GJ]</li> <li>Zone_Exfiltration_Heat_Loss[GJ]</li> <li>Zone_Exhaust_Air_Heat_Loss[GJ]</li> <li>Heat_Rejection_Energy[GJ]</li> <li>Anthropogenic_Emissions[GJ]</li> </ul> <p>This data is made free and openly available in hopes of stimulating any simulation-informed use case. Data is provided as-is with no warranties, express or implied, regarding fitness for a particular purpose. We wish to thank our sponsors which include Oak Ridge National Laboratory (ORNL), U.S. Dept. of Energy’s (DOE) Building Technologies Office (BTO), Office of Electricity (OE), and Biological and Environmental Research (BER).</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.