Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
390
datasets available to search
ShareScore release 0.9.0
Dataset results
390 results for “LiDAR data”
First ISCCP Regional Experiment (FIRE) Cirrus Phase II Raman Lidar Data
The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to seek the basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between ISCCP data, GCM parameterizations, and higher space and time resolution cloud data. To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13 - November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29 - July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13 - December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1 - June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems.The GSFC Raman Lidar water vapor mixing ratio (wvmr) data with altitudes and times were collected for the period from 13 Nov 1991 to07 Dec 1991. Data were collected at night and consists of a series of one minute profiles. Data are summed for one minute in the detectors and saved to a file. For the 10 minute averaged data, the data are summed for 10 minutes before the calculations are performed. Each profile has a 75 meter resolution from 0.4135 to 10.299 kilometers. Zero (0) km means sea level. The site altitude is 0.229 km and thefirst data point is at 0.1845 km above ground level.
Lidar Atmospheric Sensing Experiment (LASE) Data Obtained During the Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX)
The Lidar Atmospheric Sensing Experiment (LASE) Tropospheric Aerosol Radiative Forcing Observational Experiment (TARFOX) data set was collected over the Western Atlantic Ocean in July 1996. The overall goal of TARFOX was to reduce uncertainties in the effects of aerosols on climate by determining the direct radiative impacts, as well as the chemical, physical, and optical properties, of the aerosols carried over the western Atlantic Ocean from the United States. LASE is an airborne autonomous DIAL system which produces measurements of aerosols and water vapor vertical profiles from the aircraft altitude down to the surface. Such profiles show the vertical context in which the TARFOX in situ and radiometric measurements are made, thus supporting the vertical extension of the in situ measurements and detecting any unsampled layers or inhomogeneities, which would impact the airborne and satellite radiative flux measurements. Note that the LASE_TARFOX data set is also available under the TARFOX project as the TARFOX_LASE data set. The data files included in these two data sets are identical.
CMS: LiDAR Data for Forested Areas in Paragominas, Para, Brazil, 2012-2014
This data set provides raw LiDAR point cloud data and derived Digital Terrain Models (DTMs) for five forested areas in the municipality of Paragominas, Para, Brazil, for the years 2012, 2013, and 2014. Data are included for two areas in Paragominas for 2013 and 2014, two areas for the Fazenda Cauaxi for 2012 and 2014, and for the Fazenda Andiroba for 2014. Shapefiles showing the LiDAR/DTM coverage areas are also provided for each of the areas.
First ISCCP Regional Experiment (FIRE) Cirrus 2 High Spectral Resolution Lidar (HSRL) Data
The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to seek the basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between ISCCP data, GCM parameterizations, and higher space and time resolution cloud data. To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13 - November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29 - July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13 - December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1 - June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems.This data set contains images of cirrus clouds advected over the HSRL during FIRE Cirrus 2 in Coffeyville, Kansas. These images consist of both the lidar backscatter and the depolarization ratio of backscatter radiation.
SAFARI 2000 Micro-Pulse Lidar Cloud and Aerosol Data, Dry Season 2000
Two Micro-Pulse Lidar (MPL) systems were deployed to Africa for the SAFARI 2000 experiment. One MPL was setup in Mongu, Zambia and the other was setup in Skukuza, South Africa. The primary focus of MPL work during SAFARI was to study the vertical distribution and optical properties of smoke from biomass burning in the region.
CALIPSO Lidar Level 3 Ice Cloud Data, Standard V1-00
CAL_LID_L3_Ice_Cloud-Standard-V1-00 is the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Lidar Level 3 Ice Cloud Data, Standard Version 1-00 data product. This data product was collected using the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument. The degradation of the laser energies that started in September 2016 had a negative impact on the product, and because of this, generation and distribution ended in December 2016. Updated Lidar Level 2 data products and changes to the Lidar Level 3 Ice Cloud algorithm will need to be completed before a new release of this product is released.This product reports global distributions of ice cloud extinction and ice water content histograms on a uniform spatial grid. All level 3 parameters are derived from the CALIPSO level 2, 5km cloud profile products, with a temporal average of one month. CALIPSO was launched on April 28, 2006, and continues to collect data necessary to study the impact of clouds and aerosols on the Earth's radiation budget and climate. It flies in the international A-Train constellation for coincident Earth observations. The CALIPSO satellite comprises three instruments: CALIOP, Imaging Infrared Radiometer (IIR), and Wide Field Camera (WFC). CALIPSO is a joint satellite mission between NASA and the French Agency CNES.
CMS: LiDAR Data for Forested Sites on Borneo Island, Kalimantan, Indonesia, 2014
This dataset provides airborne LiDAR data collected over 90 sites totaling approximately 100,000 hectares of forested land in Kalimantan, Indonesia on the island of Borneo in late 2014. The data were collected as part of an effort to establish a national forest monitoring system for Indonesia that uses a combination of remote sensing and ground-based forest carbon inventory approaches.
CALIPSO Lidar Level 3 Cloud Occurrence Data, Standard V1-00
CAL_LID_L3_Cloud_Occurrence-Standard-V1-00 is the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Lidar Level 3 Cloud Occurrence Data, Standard Version 1-00 data product. This data product was collected using the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument. The degradation of the laser energies that started in September 2016 had a negative impact on the product, and because of this, generation and distribution ended in December 2016. Updated Lidar Level 2 data products and changes to the Lidar Level 3 Cloud Occurrence algorithm will need to be completed before a new release of this product is released.This product reports global distributions of clouds on a uniform spatial grid. All level 3 parameters are derived from the CALIPSO level 2 data, with a temporal average of one month. CALIPSO was launched on April 28, 2006, and continues to collect data necessary to study the impact of clouds and aerosols on the Earth's radiation budget and climate. It flies in the international A-Train constellation for coincident Earth observations. The CALIPSO satellite comprises three instruments: CALIOP, Imaging Infrared Radiometer (IIR), and Wide Field Camera (WFC). CALIPSO is a joint satellite mission between NASA and the French Agency CNES.
AfriSAR: Rainforest Canopy Height Derived from PolInSAR and Lidar Data, Gabon
This dataset provides estimates of forest canopy height and canopy height uncertainty for study areas in the Pongara National Park and the Lope National Park, Gabon. Two canopy height products are included: 1) Canopy height was derived from multi-baseline Polarimetric Interferometric Synthetic Aperture Radar (PolInSAR) data using an inversion of the random volume over ground (RVoG) model and Kapok, an open source Python library. 2) Canopy height was derived from a fusion of PolInSAR and Land, Vegetation, and Ice Sensor (LVIS) Lidar data. This dataset also includes various intermediate parameters of the PolInSAR data (including radar backscatter, coherence, and viewing and terrain geometry) which provide additional insight into the input data used to invert the RVoG model and accuracy of the canopy height estimates. The AfriSAR campaign was flown from 2016-02-27 to 2016-03-08. AfriSAR data were collected by NASA, in collaboration with the European Space Agency (ESA) and the Gabonese Space Agency.
CALIPSO Lidar Level 3 Tropospheric Aerosol Profiles, Cloudy Sky Transparent Data, Standard V4-20
CAL_LID_L3_Tropospheric_APro_CloudySkyTransparent-Standard-V4-20 is the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Lidar Level 3 Tropospheric Aerosol Profiles, Cloudy Sky Transparent Data, Standard Version 4-20 data product. Data is collected using the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument. Data generation and distribution of this V4.20 product ended on July 1, 2020, to support a change in the operating system of the CALIPSO production clusters. The V4.21 data product covers July 1, 2020, to current. The CALIPSO lidar level 3 aerosol data product reports monthly mean profiles of aerosol optical properties on a uniform spatial grid. It is intended to be a tropospheric product, so data are only reported below altitudes of 12 km. All level 3 parameters are derived from the version 4.20 CALIOP level 2 aerosol profile product and have been quality screened before averaging. The primary quantities reported are vertical profiles of the aerosol extinction coefficient at 532 nm and its vertical integral, the aerosol optical depth (AOD). Aerosol type and spatial distribution information are also included. Averaged profile data is reported for all aerosols, regardless of type, and for mineral dust aerosols only. Classification of dust is based on the aerosol-type flags in the level 2 profile product. To keep level 3 file sizes manageable, there are four different types of level 3 files produced, depending on the sky condition and the temporal coverage of the data before averaging: Description of the Four Sky Conditions (Day, Night)1) All Sky: All level 2 columns are averaged, regardless of cloud occurrence,2) Cloud-Free: Only cloud-free level 2 columns are averaged,3) Cloudy-Sky, Transparent: Only level 2 columns containing transparent clouds are averaged, and4) Cloud-Sky, Opaque: Only level 2 columns containing opaque clouds are averagedCALIPSO was launched on April 28, 2006, to study the impact of clouds and aerosols on the Earth's radiation budget and climate. It flies in formation with five other satellites in the international "A-Train" (PDF) constellation for coincident Earth observations. The CALIPSO satellite comprises three instruments: the CALIOP, the Imaging Infrared Radiometer (IIR), and the Wide Field Camera (WFC). CALIPSO is a joint satellite mission between NASA and the French Agency CNES (Centre National D'Etudes Spatiales).
ICESat-2 Pre-Launch Simulated Multiple Altimeter Beam Experimental Lidar Advanced Topographic Laser Altimeter System (MATLAS) Data, Version 2
Multiple Altimeter Beam Experimental Lidar (MABEL) Advanced Topographic Laser Altimeter System (MATLAS) simulates the expected performance of the ICESat-2 ATLAS instrument. The data are produced from MABEL data by adjusting the detected number of signal and noise photons to that predicted using ATLAS instrument model design cases. Each data file consists of approximately 1 minute of HDF5-derived MABEL data.
STAQS NASA G-III High Altitude Lidar Observatory (HALO) Data
STAQS_AircraftRemoteSensing_NASA-G3_HALO_Data is the remotely sensed trace gas data for the NASA Gulfstream III aircraft taken by the High Altitude Lidar Observatory (HALO) instrument as part of the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete.Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, and assessing the benefit of assimilating TEMPO data into chemical transport models.
BOREAS Scanning Lidar Imager of Canopies by Echo Recovery (SLICER): Level-3 Data
Scanning Lidar Imager of Canopies by Echo Recovery (SLICER) data were acquired in support of BOReal Ecosystem-Atmosphere Study (BOREAS) at all of the Tower Flux (TF) sites in the Southern and Northern Study Areas (SSA and NSA, respectively) and along transects between the study areas. Data were acquired on 5 days between 18 and 30 July 1996. Each coverage of a tower site is typically 40 km in length, with a minimum of 3 and a maximum of 10 lines across each tower oriented in a variety of azimuths. The SLICER data were acquired simultaneously with Advanced Solid-State Array Spectroradiometer (ASAS) hyperspectral, multiview angle images. The SLICER Level 3 products consist of binary files for each flight line with a data record for each laser shot composed of 13 parameters and a 600-byte waveform that is the raw record of the back scatter laser energy reflected from Earth's surface.
STAQS JSC GV High Spectral Resolution Lidar-2 Data
STAQS_AircraftRemoteSensing_JSC-GV_HSRL2_Data is the remotely sensed trace gas data for the JSC Gulfstream V aircraft taken by the High Spectral Resolution Lidar-2 (HSRL-2) as part of the Synergistic TEMPO Air Quality Science (STAQS) mission. Data collection for this product is complete.Launched in April 2023, NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) satellite monitors major air pollutants across North America every daylight hour at high spatial resolution at a geostationary orbit (GEO). With these measurements, NASA’s STAQS mission seeks to integrate TEMPO satellite observations with traditional air quality monitoring to improve understanding of air quality science. STAQS is being conducted during summer 2023, targeting urban areas, including Los Angeles, New York City, and Chicago. As part of the mission two aircraft will be outfitted with various remote sensing payloads. The Johnson Space Center (JSC) Gulfstream-V (G-V) aircraft will feature the GeoCAPE Airborne Simulator (GCAS) and combined High Spectral Resolution Lidar-2 (HSRL-2) and Ozone Differential Absorption Lidar (DIAL). This payload provides repeated high-resolution mapping of NO2, HCHO, ozone, and aerosols up to 3x per day over targeted cities. NASA Langley Research Center’s (LaRC’s) Gulfstream-III will measure city-scale emissions 2x per day over the targeted cities with the High-Altitude Lidar Observatory (HALO) and Airborne Visible InfraRed Imaging Spectrometer – Next Generation (AVIRS-NG). STAQS will also incorporate ground-based tropospheric ozone profiles from the NASA Tropospheric Ozone Lidar Network (TOLNet), NO2, HCHO, and ozone measurements from Pandora spectrometers, and will leverage existing networks operated by the EPA and state air quality agencies. The primary goal of STAQS is to improve our current understanding of air quality science under the TEMPO field of regard. Further goals include evaluating TEMPO level 2 data products, interpreting the temporal and spatial evolution of air quality events tracked by TEMPO, improving temporal estimates of anthropogenic, biogenic, and greenhouse gas emissions, and assessing the benefit of assimilating TEMPO data into chemical transport models.
CALIPSO Lidar Level 3 Tropospheric Aerosol Profiles, All Sky Data, Standard V4-20
CAL_LID_L3_Tropospheric_APro_AllSky-Standard-V4-20 is the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Lidar Level 3 Tropospheric Aerosol Profiles, All Sky Data, Standard Version 4-20 data product. This data product was collected using the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument. Data generation and distribution of this V4.20 product ended on July 1, 2020, to support a change in the operating system of the CALIPSO production clusters. The V4.21 data product covers July 1, 2020, to current. The CALIPSO lidar level 3 aerosol data product reports monthly mean profiles of aerosol optical properties on a uniform spatial grid. It is intended to be a tropospheric product, so data are only reported below altitudes of 12 km. All level 3 parameters are derived from the version 4.20 CALIOP level 2 aerosol profile product and have been quality screened before averaging. The primary quantities reported are vertical profiles of the aerosol extinction coefficient at 532 nm and its vertical integral, the aerosol optical depth (AOD). Aerosol type and spatial distribution information are also included. Averaged profile data is reported for all aerosols, regardless of type, and for mineral dust aerosols only. Classification of dust is based on the aerosol-type flags in the level 2 profile product. To keep level 3 file sizes manageable, four different types of level 3 files are produced, depending on the sky condition and the temporal coverage of the data prior to averaging.Description of the Four Sky Conditions (Day, Night):1) All Sky: All level 2 columns are averaged, regardless of cloud occurrence,2) Cloud-Free: Only cloud-free level 2 columns are averaged,3) Cloudy-Sky, Transparent: Only level 2 columns containing transparent clouds are averaged, and4) Cloud-Sky, Opaque: Only level 2 columns containing opaque clouds are averagedCALIPSO was launched on April 28, 2006, and continues to collect data necessary to study the impact of clouds and aerosols on the Earth's radiation budget and climate. It flies in the international A-Train constellation for coincident Earth observations. The CALIPSO satellite comprises three instruments: CALIOP, Imaging Infrared Radiometer (IIR), and Wide Field Camera (WFC). CALIPSO is a joint satellite mission between NASA and the French Agency CNES (Centre national d'études spatiales).
Lidar Atmospheric Sensing Experiment (LASE) Data Obtained During the Convection And Moisture Experiment (CAMEX-3)
LASE_CAMEX3 data are Lidar Atmospheric Sensing Experiment water vapor and aerosol data measurements taken during the 3rd Convection and Moisture Experiment (CAMEX3).LASE (Lidar Atmospheric Sensing Experiment) is an airborne autonomous DIAL system developed to measure water vapor and aerosol profiles. The Convection And Moisture EXperiment (CAMEX-3) campaign was based at Patrick Air Force Base, Florida from 6 August - 23 September, 1998. CAMEX-3 successfully studied Hurricanes Bonnie, Danielle, Earl and Georges. CAMEX-3 collected data for research in tropical cyclone development, tracking, intensification, and landfalling impacts using NASA-funded aircraft and surface remote sensing instrumentation.The CAMEX-3 study yields high spatial and temporal information of hurricane structure, dynamics, and motion. The LASE instrument's purpose in this experiment is to characterize the hurricane environment using water vapor and aerosol measurements for use as input to models and assimilation schemes and to fill in sonde data voids.
Aerosol Research Branch (ARB) 48 inch Lidar Data
The ARB_48_IN_LIDAR data set contains data collected from a 48-inch lidar system located at NASA Langley Research Center. Each granule consists of one year of data. The days of data are different in each granule. Each measurement consists of four parameters: stratospheric integrated backscatter over altitude, altitude levels, scattering ratio at each altitude level, and aerosol backscattering coefficient at each altitude level. An image was produced to represent the data collected for each granule.The Aerosol Research Branch (ARB) Light Detection and Ranging (LIDAR) project has been taking ground based LIDAR measurements from Langley Research Center in Hampton, Virginia since May 1974. These LIDAR measurements provide high resolution vertical profiles of the upper tropospheric and stratospheric aerosols. The LIDAR system has evolved over the years and provides a valuable long-term history of the middle-latitude stratospheric aerosol.The measurements for ARB were made using a LIDAR system. This system uses a ruby laser that emits one joule per pulse with a repeat rate of 0.15 hertz (Hz) at a wavelength of 0.6943 micrometers. This system also uses a 48-inch cassegrainian configured telescope mounted on a movable platform. The transmitter laser beam has a divergence of about 1.0 mrad, and the maximum receiver field of view is 4.0 mrad. The LIDAR has a signal bandwidth of 1 MHz, and this is equal to a 150 meter vertical resolution. Three photomultiplier tubes are used to enhance the dynamic range. These tubes are electronically switched on at specific times after the laser has been fired. The photomultiplier tube output signals are processed by 12-bit Computer Automated Measurement and Control (CAMAC) based digitizers and acquired by a personal computer. The data are archived on optical discs.
CALIPSO Lidar Level 0 data
CAL_LID_L0-Standard-V1-00 is the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Lidar Level 0, Version 1-00 data product. These data product were collected using the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). This data product translates a matched set of three 90-minute raw Lidar Level 0 binary files into a single file containing the lidar measurements and health and status data from all three channels; 532 nm parallel, 532 nm perpendicular, and 1064 nm. CALIPSO was a partnership between NASA and the French Space Agency, CNES. CALIPSO was launched on April 28, 2006 to study the many roles played by clouds and aerosols in Earth’s climate and weather. It flew in the international A-Train constellation for coincident Earth observations from launch until September 13, 2018, when CALIPSO began lowering its orbit from 705 km to 688 km (428 miles) above the Earth to resume formation flying with CloudSat as part of the “C-Train”. The CALIPSO satellite carried three remote sensing instruments: the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP), the Imaging Infrared Radiometer (IIR), and the Wide Field-of-View Camera (WFC). By mutual agreement between NASA and CNES, the CALIPSO science mission concluded on August 1, 2023.
ECHIDNA LIDAR Campaigns: Forest Canopy Imagery and Field Data, U.S.A., 2007-2009
This data set contains forest canopy scan data from the Echidna® Validation Instrument (EVI) and field measurements data from three campaigns conducted in the United States: 2007 New England Campaign; 2008 Sierra National Forest Campaign; and 2009 New England Campaign. The New England field sites were located in Harvard Forest (Massachusetts), Howland Research Forest (Maine), and the Bartlett Experimental Forest (New Hampshire).The objective of the research was to evaluate the ability of the EVI ground-based, scanning near-infrared lidar to retrieve stem diameter, stem count density, stand height, leaf area index, foliage profile, foliage area volume density, and other useful forest structural parameters rapidly and accurately.The EVI scan data are Andrieu Transpose (AT) Projection images in ENVI *.img and *.hdr file pairs. There are 28 images from the 2007 New England Campaign, 30 images from the 2008 Sierra National Forest Campaign, and 54 images from the 2009 New England Campaign. There are range-weighted mean preview image files (.jpg format) for each AT Projection image.Manual measurements of tree structural properties were made during each campaign at EVI scan locations. The field measurements are provided in one file for each campaign (.csv format). Parameters include species identification, DBH, tree height, crown base, etc. organized by field plot. There is also a data file (.csv format) which compares EVI derived measurements to the field measured data (DBH, stem density, basal area, biomass, and LAI) from the 2007 New England Campaign.
CALIPSO Lidar Level 3 Tropospheric Aerosol Profiles, All Sky Data, Standard V4-21
CAL_LID_L3_Tropospheric_APro_AllSky-Standard-V4-21 is the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) Lidar Level 3 Tropospheric Aerosol Profiles, All Sky Data, Standard Version 4-21 data product. This data product was collected using the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument. Data collection for this product is complete.The CALIPSO lidar level 3 aerosol data product reports monthly mean profiles of aerosol optical properties on a uniform spatial grid. It is intended to be a tropospheric product, so data are only reported below altitudes of 12 km. All level 3 parameters are derived from the version 4.21 CALIOP level 2 aerosol profile product and have been quality screened before averaging. The primary quantities reported are vertical profiles of the aerosol extinction coefficient at 532 nm and its vertical integral, the aerosol optical depth (AOD). Aerosol type and spatial distribution information are also included. Averaged profile data is reported for all aerosols, regardless of type, and for mineral dust aerosols only. Classification of dust is based on the aerosol-type flags in the level 2 profile product. To keep level 3 file sizes manageable, four different types of level 3 files are produced, depending on the sky condition and the temporal coverage of the data prior to averaging.Description of the Four Sky Conditions (Day, Night):1) All Sky: All level 2 columns are averaged, regardless of cloud occurrence,2) Cloud-Free: Only cloud-free level 2 columns are averaged,3) Cloudy-Sky, Transparent: Only level 2 columns containing transparent clouds are averaged, and4) Cloud-Sky, Opaque: Only level 2 columns containing opaque clouds are averagedCALIPSO was launched on April 28, 2006, and continues to collect data necessary to study the impact of clouds and aerosols on the Earth's radiation budget and climate. It flies in the international A-Train constellation for coincident Earth observations. The CALIPSO satellite comprises three instruments: CALIOP, Imaging Infrared Radiometer (IIR), and Wide Field Camera (WFC). CALIPSO is a joint satellite mission between NASA and the French Agency CNES (Centre national d'études spatiales).
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.