Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

509

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

509 results for “Version 2”

Learn how ShareScore rates datasets ↗
zenodo32/100

Slipids POPE Simulations (versions 1 and 2) 310 K (NOTE: hexagonal membrane)

<p>Two Slipids&nbsp;POPE bilayer simulations performed using GROMACS 5.0.6 for 200 ns with different starting velocities. Simulations were performed with a 1.0&nbsp;nm cut-off with PME for the Coulombic and a 1.0 nm cut-off for the van der Waals interactions interactions. These simulations were performed at 310 K with a 336 hexagonal lipid bilayer. The full trajectories are provided bar the initial 100 ns. The starting structure of the membrane was made by reverse mapping an equilibrated MARTINI POPE bilayer (constructed with the INSANE script).</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

GROMOS 43A1-S3 POPE Simulations (versions 1 and 2) 313 K (NOTE: anisotropic pressure coupling)

<p>Two&nbsp;GROMOS 43A1-S3 POPE bilayer simulations performed using GROMACS 4.0.7 for 200 ns&nbsp;with different starting velocities. Simulations were performed with the standard 43A1-S3 settings: a 1.0&nbsp;nm cut-off with PME for the Coulombic interactions and a twin-range 1.0/1.6 nm cut-off for the van der Waals interactions. These simulations were performed at 313 K with a 128 lipid bilayer and used anisotropic pressure coupling. The full trajectories are provided bar&nbsp;the initial 100 ns. The starting structure was made through&nbsp;the conversion of an equilibrated GROMOS 43A1-S3 POPC membrane.</p>

opencc-by-4.0Jun 2018View details →
zenodo32/100

Data for: Scalable Flood Level Trend Monitoring with Surveillance Cameras using a Deep Convolutional Neural Network [Version 2]

<p>This package provides material that can be openly published for the paper &quot;Scalable Flood Level Trend Monitoring with Surveillance Cameras using a Deep Convolutional Neural Network&quot;. It consists in the code used to generate results and figures as well as the weights of the deep convolutional neural networks trained to segment water in the surveillance camera images.</p>

opencc-zeroDec 2018View details →
zenodo32/100

Dataset for "Universal Loop assembly (uLoop): open, efficient, and species-agnostic DNA fabrication" Version 2

<p>This data is associated to the project &quot;<strong>Universal Loop assembly (uLoop): open, efficient, and species-agnostic DNA fabrication&quot;.&nbsp;</strong>For more details see:&nbsp;https://osf.io/kw4fh/&nbsp;</p> <p>Data is organized as follows:</p> <p><strong>DNA</strong>: DNA genbank files for&nbsp;uLoop receivers, L0 parts and L1, L2, L3 and L4 assemblies</p> <p><strong>Efficiency-productivity</strong>: scoring representing uLoop&nbsp;assembly efficiency</p> <p><strong>Performance-bac:</strong> flow cytometry and plate fluorometry data describing the stability of uLoop genetic constructs in E coli</p> <p><strong>GFP_to_RFP_ratio_raw_data_3N</strong>: raw data for fig4A (Pollak et al. 2019)</p> <p><strong>Growth_rate_analysis_raw_data_3N:</strong>&nbsp;raw data for fig4C&nbsp;(Pollak et al. 2019)</p> <p>&nbsp;</p> <p>&nbsp;</p>

opencc-by-4.0Oct 2019View details →
zenodo32/100

Data and code underpinning: "The association of smoking status with SARS-CoV-2 infection, hospitalisation and mortality from COVID-19: A living rapid evidence review with Bayesian meta-analyses (version 12)"

<p>No description provided.</p>

openother-openDec 2020View details →
zenodo32/100

Assessment of equilibrium climate sensitivity of the Community Earth System Model version 2 through simulation of the Last Glacial Maximum

<p>Simulation data (TS, FSNT, and FLNT) and apap cloud feedback analysis for CESM2 LGM simulation</p> <p><strong>Simulation boundary condition files in 1-degree resolution: boundary_condition_files.zip</strong></p> <p><strong>Please cite:&nbsp;</strong></p> <p>Zhu, J., Otto-Bliesner, B. L., Brady, E. C., Poulsen, C. J., Tierney, J. E., Lofverstrom, M., &amp; DiNezio, P. (2021). Assessment of equilibrium climate sensitivity of the Community Earth System Model version 2 through simulation of the Last Glacial Maximum. <em>Geophysical Research Letters</em>, <em>n/a</em>(n/a), e2020GL091220. https://doi.org/10.1029/2020GL091220</p>

opencc-by-4.0Dec 2020View details →
nasa32/100

CYGNSS Level 2 Science Data Record Version 2.1

This dataset contains the Version 2.1 CYGNSS Level 2 Science Data Record which provides the time-tagged and geolocated average wind speed (m/s) and mean square slope (MSS) with 25x25 kilometer resolution from the Delay Doppler Mapping Instrument aboard the CYGNSS satellite constellation. This version supersedes Version 2.0. The reported sample locations are determined by the specular points corresponding to the Delay Doppler Maps (DDMs). A subset of DDM data used in the direct processing of the average wind speed and MSS is co-located inside of the Level 2 data files. Only one netCDF data file is produced each day (each file containing data from up to 8 unique CYGNSS spacecraft) with a latency of approximately 6 days (or better) from the last recorded measurement time. The Version 2.1 release represents the second science-quality release. Here is a summary of improvements that reflect the quality of the Version 2.1 data release: 1) revised Geophysical Model Functions (GMFs) for both Fully Developed Seas (FDS) and Young Seas with Limited Fetch conditions, to be consistent with the calibration changes made to the v2.1 Level 1 science data products.; 2) Revised covariance matrix between DDMA and LES versions of the FDS wind speed retrieval, used by the minimum variance estimator, resulting from changes made to the v2.1 Level 1 science data products; 3) Revised debiasing algorithm coefficients used by the FDS L2 retrieval algorithm, resulting from changes made to the v2.1 Level 2 science data products; 4) revised quality control (Q/C) flags related to the required level of consistency between DDMA and LES versions of the FDS wind speed retrieval (the errors in the two retrievals are now less correlated so larger discrepancies are allowed; if either retrieval is not available, the sample receives a fatal Q/C flag); 5) new Q/C flag related to the block type of the GPS satellite which provided the transmitted signal. Samples using block II-F signals receive a fatal Q/C flag due to the higher level of uncertainty in their radiated power; 6) revised wind speed uncertainty values as a function of RCG and wind speed, plus a new dependence of the uncertainty on GPS block type to reflect the higher uncertainty in GPS radiated power for block II-F satellites.

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 3 Science Data Record Version 2.1

This dataset contains the Version 2.1 CYGNSS Level 3 Science Data Record which provides the average wind speed and mean square slope (MSS) on a 0.2x0.2 degree latitude by longitude equirectangular grid obtained from the Delay Doppler Mapping Instrument aboard the CYGNSS satellite constellation. The Level 2 Delay Doppler Map (DDM) data are used in the direct processing of the average wind speed and MSS data that are binned on the Level 3 grid. A subset of DDM data used in the direct processing of the average wind speed and MSS is co-located inside of the Level 2 data files. A single netCDF-4 data file is produced for each day of operation with an approximate 6 day latency. This version supersedes Version 2.0. The reported sample locations are determined by the specular points corresponding to the Delay Doppler Maps (DDMs). The Version 2.1 release represents the second science-quality release. Here is a summary of improvements that reflect the quality of the Version 2.1 data release: 1) first time availability of wind speeds using the Geophysical Model Function (GMF) calibrated for Young Seas with Limited Fetch (YSLF) conditions; 2) inherits all other improvements made to the version 2.1 Level 2 data intended to improve the quality of the wind speed retrievals and uncertainty estimates. For a full list of improvements to the version 2.1 Level 2 data, please refer to the following dataset information page: https://podaac.jpl.nasa.gov/dataset/CYGNSS_L2_V2.1

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Science Data Record Version 3.0

This dataset contains the Version 3.0 CYGNSS Level 2 Science Data Record which provides the time-tagged and geolocated average wind speed (m/s) and mean square slope (MSS) with 25x25 kilometer resolution from the Delay Doppler Mapping Instrument aboard the CYGNSS satellite constellation. This version supersedes Version 2.1; https://doi.org/10.5067/CYGNS-L2X21. The reported sample locations are determined by the specular points corresponding to the Delay Doppler Maps (DDMs). A subset of DDM data used in the direct processing of the average wind speed and MSS is co-located inside of the Level 2 data files. Only one netCDF data file is produced each day (each file containing data from up to 8 unique CYGNSS spacecraft) with a latency of approximately 6 days (or better) from the last recorded measurement time. Here is a summary of processing changes reflected in the v3.0 data: 1) the changes to calibration and validation of the Level 1 Normalized Bistatic Radar Cross Section (NBRCS) necessitated updates to the Geophysical Model Functions (GMFs) used to retrieve wind speed; 2) the GMF for fully developed seas (FDS) conditions was generating using matchups between NBRCS measurements and coincident wind speeds produced by NASAs Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) reanalysis model; 3) the GMF for young seas with limited fetch (YSLF) was generated using matchups between NBRCS and coincident wind speeds produced by NOAAs Hurricane Weather Research and Forecast (HWRF) System; 4) YSLF wind speed is a tapered linear combination of wind speeds derived from the FDS and YSLF GMFs, where the taper gives more weight to FDS at low wind speeds and more to YSLF at high wind speeds and accounts for the transition from FDS to YSLF sea state conditions near cyclonic storms; 5) re-introduces measurements using transmissions from previously discarded GPS satellite block types; in prior versions, Block II-F was completely discarded due to large variations in GPS transmit power. The real time transmit power monitoring and correction implemented in Level 1 v3.0 data now allows Block II-F signals to be used.

restrictednotspecifiedApr 2025View details →
nasa32/100

GEDI L4A Footprint Level Aboveground Biomass Density, Version 2

This dataset contains Global Ecosystem Dynamics Investigation (GEDI) Level 4A (L4A) Version 2 predictions of the aboveground biomass density (AGBD; in Mg/ha) and estimates of the prediction standard error within each sampled geolocated laser footprint. In this version, the granules are in sub-orbits. The algorithm setting group selection used for GEDI02_A Version 2 has been modified for Evergreen Broadleaf Trees in South America to reduce false positive errors resulting from the selection of waveform modes above ground elevation as the lowest mode. The footprints are located within the global latitude band observed by the International Space Station (ISS), nominally 51.6 degrees N and S and reported for the period 2019-04-18 to 2021-08-05. The GEDI instrument consists of three lasers producing a total of eight beam ground transects, which instantaneously sample eight ~25 m footprints spaced approximately every 60 m along-track. The GEDI beam transects are spaced approximately 600 m apart on the Earth's surface in the cross-track direction, for an across-track width of ~4.2 km. Footprint AGBD was derived from parametric models that relate simulated GEDI Level 2A (L2A) waveform relative height (RH) metrics to field plot estimates of AGBD. Height metrics from simulated waveforms associated with field estimates of AGBD from multiple regions and plant functional types (PFTs) were compiled to generate a calibration dataset for models representing the combinations of world regions and PFTs (i.e., deciduous broadleaf trees, evergreen broadleaf trees, evergreen needleleaf trees, deciduous needleleaf trees, and the combination of grasslands, shrubs, and woodlands). For each of the eight beams, additional data are reported with the AGBD estimates, including the associated uncertainty metrics, quality flags, model inputs, and other information about the GEDI L2A waveform for this selected algorithm setting group. Model inputs include the scaled and transformed GEDI L2A RH metrics, footprint geolocation variables and land cover input data including PFTs and the world region identifiers. Additional model outputs include the AGBD predictions for each of the six GEDI L2A algorithm setting groups with AGBD in natural and transformed units and associated prediction uncertainty for each GEDI L2A algorithm setting group. Providing these ancillary data products will allow users to evaluate and select alternative algorithm setting groups. Also provided are outputs of parameters and variables from the L4A models used to generate AGBD predictions that are required as input to the GEDI04_B algorithm to generate 1-km gridded products. Note that there are 351 granules in this release affected by duplicate GEDI shots for selected days (2020-297 to 2020-300, 2020-365, and 2021-106).

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Climate Data Record Version 1.2

This dataset contains the Version 1.2 CYGNSS Level 2 Climate Data Record which provides the time-tagged and geolocated average wind speed (m/s) and mean square slope (MSS) with 25x25 kilometer resolution from the Delay Doppler Mapping Instrument aboard the CYGNSS satellite constellation. The reported sample locations are determined by the specular points corresponding to the Delay Doppler Maps (DDMs). A subset of DDM data used in the direct processing of the average wind speed and MSS is co-located inside of the Level 2 data files. Only one netCDF data file is produced each day (each file containing data from up to 8 unique CYGNSS spacecraft) with a latency of approximately 1 to 2 months from the last recorded measurement time. The Version 1.2 CDR represents is a collection of reanalysis products derived from the SDR v3.1 Level 1 data (https://doi.org/10.5067/CYGNS-L1X31 ). Calibration accuracy and long term stability are improved relative to SDR v3.1 (https://doi.org/10.5067/CYGNS-L2X31 ) using the same trackwise correction algorithm as was used by CDR v1.1 (https://doi.org/10.5067/CYGNS-L2C11 ), which was derived from SDR v2.1 Level 1 data (https://doi.org/10.5067/CYGNS-L1X21 ). Details of the algorithm are provided in the Trackwise Corrected CDR Algorithm Theoretical Basis Document. CDR Level 2 and 3 products (ocean surface wind speed, mean square slope, and latent and sensible heat flux) are generated from the CDR L1 data using the v3.1 SDR data processing algorithms. These products also exhibit improved calibration accuracy and stability over SDR v3.0. Trackwise correction is applied to the two primary CYGNSS L1 science data products, the normalized bistatic radar cross section (NBRCS) and the leading edge slope of the Doppler-integrated delay waveform (LES). The correction compensates for small errors in the Level 1 calibration, due e.g. to uncertainties in the GPS transmitting antenna gain patterns and the CYGNSS receiving antenna gain patterns. It should be noted that the trackwise correction algorithm cannot be successfully applied to all SDR v3.1 L1 data so there is also some loss of samples that were present in SDR v3.1.

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Ocean Surface Heat Flux Climate Data Record Version 1.1

This dataset contains the first release, Version 1.1, of the CYGNSS Level 2 Ocean Surface Heat Flux Climate Data Record (CDR), which provides the time-tagged and geolocated ocean surface heat flux parameters with 25x25 kilometer footprint resolution with 1-2 month latency from the Delay Doppler Mapping Instrument (DDMI) aboard the CYGNSS satellite constellation. The Cyclone Global Navigation Satellite System (CYGNSS) is a NASA Earth System Science Pathfinder Mission designed to collect the first frequent space-based measurements of surface wind speeds in the inner core of tropical cyclones. The Coupled Ocean-Atmosphere Response Experiment (COARE) version 3.5 algorithm combines CYGNSS L2 CDR v1.1 ocean surface wind speed estimates with the auxiliary parameters provided by the NASA Modern-Era Retrospective Analysis for Research and Applications Version 2 (MERRA-2) to produce latent and sensible heat fluxes and their respective transfer coefficients. More information on how the data is produced and validated can be found in the dataset user guide (see Documentation tab). More information on the CYGNSS mission, spacecraft, instrumentation and related datasets is available here: https://podaac.jpl.nasa.gov/CYGNSS. Additional information on the CYGNSS L2 CDR v1.1 wind speed dataset is available here: https://doi.org/10.5067/CYGNS-L2C11.

restrictednotspecifiedApr 2025View details →
nasa32/100

NOAA CYGNSS Level 2 Science Wind Speed 25-km Product Version 1.2

This dataset contains the Version 1.2 NOAA CYGNSS Level 2 Science Wind Speed Product Version 1.2 which provides the time-tagged and geolocated average wind speed (m/s) in 25x25 kilometer grid cells along the measurement tracks from the Delay Doppler Mapping Instrument (DDMI) aboard the CYGNSS satellite constellation. This version corresponds to the second science-quality released through the PO.DAAC, as produced by NOAA/NESDIS using a specific geophysical model function (GMF version 1.0) and a track-wise debiasing algorithm as part of the wind speed retrieval process. The reported retrieval locations are determined by averaging the specular point locations falling within each 25 km grid cell. Version 1.2 includes four major updates compared to Version 1.1 ( https://doi.org/10.5067/CYGNN-22511 ), namely: 1) the inclusion of data associated to a spacecraft roll angle exceeding +/- 5 degrees; 2) an improved wind speed performance in the higher wind speed regime; 3) a full revision of the quality flags; 4) the inclusion of a wind speed retrieval error variable. Only one netCDF-4 data file is produced for each day (each file containing data from up to 8 unique CYGNSS spacecraft) with a latency of approximately 6 days (or better) from the last recorded measurement time. Formatting of the data variables and metadata designed to be consistent with the netCDF-4 formatting provided by the legacy CYGNSS mission Level 2 wind speed science data record (SDR).

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Climate Data Record Version 1.0

This dataset contains the Version 1.0 CYGNSS Level 2 Climate Data Record which provides the time-tagged and geolocated average wind speed (m/s) and mean square slope (MSS) with 25x25 kilometer resolution from the Delay Doppler Mapping Instrument aboard the CYGNSS satellite constellation. The reported sample locations are determined by the specular points corresponding to the Delay Doppler Maps (DDMs). A subset of DDM data used in the direct processing of the average wind speed and MSS is co-located inside of the Level 2 data files. Only one netCDF data file is produced each day (each file containing data from up to 8 unique CYGNSS spacecraft) with a latency of approximately 2 months (or better) from the last recorded measurement time. The Version 1.0 CDR represents the first climate-quality release and is a collection of reanalysis products derived from the SDR v2.1 Level 1 data. Calibration accuracy and long term stability are improved relative to the SDR v2.1 using a new trackwise correction algorithm which constrains the average value of the L1 data using MERRA-2 reanalysis wind speeds. Details of the algorithm are provided in the Trackwise Corrected CDR Algorithm Theoretical Basis Document. CDR Level 2 and 3 products (ocean surface wind speed, mean square slope, and latent and sensible heat flux) are generated from the CDR L1 data using the v2.1 SDR data processing algorithms. These products also exhibit improved calibration accuracy and stability over SDR v2.1. Trackwise correction is applied to the two primary CYGNSS L1 science data products the normalized bistatic radar cross section (NBRCS) and the leading edge slope of the Doppler-integrated delay waveform (LES). The correction compensates for variations in the transmit power level of the GPS signals measured by the CYGNSS bistatic radar receivers. The SDR v2.1 L1 algorithm assumes a constant GPS transmit power and variations in it can be misinterpreted as variations in the L1 data and in subsequent L2 science data products derived from them. The GPS constellation consists of several different satellite models (a.k.a. block types) and the level of transmit power variation differs between them. The more recent Block IIF models (which account for ~37% of the GPS constellation) have significantly larger variations than the older models and, for this reason, they have been screened out and not used to produce SDR v2.1 L2 or L3 science data products. Trackwise correction eliminates the need for this screening so CDR L2 and L3 data products now include Block IIF samples. It should be noted that the trackwise correction algorithm cannot be successfully applied to all SDR v2.1 L1 data so there is also some loss of samples that were present in SDR v2.1. Overall, there is a significant increase in sampling and improvement in spatial coverage with the CDR products.

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Ocean Surface Heat Flux Science Data Record Version 3.2

The CYGNSS level 2 ocean surface heat flux science data record version 3.2 dataset is provided as a service to the oceanographic and meteorological research communities on behalf of the CYGNSS Science Team in direct collaboration with the Cyclone Global Navigation Satellite System (CYGNSS) Mission. CYGNSS was launched on 15 December 2016, it is a NASA Earth System Science Pathfinder Mission that was launched with the purpose of collecting the first frequent space‐based measurements of surface wind speeds in the inner core of tropical cyclones. Originally made up of a constellation of eight micro-satellites, the observatories provide nearly gap-free Earth coverage using an orbital inclination of approximately 35° from the equator, with a mean (i.e., average) revisit time of seven hours and a median revisit time of three hours. <br><br>This dataset provides time-tagged and geolocated ocean surface heat flux parameters with 25x25 kilometer footprint resolution from the Delay Doppler Mapping Instrument (DDMI) aboard the CYGNSS satellite constellation. The reported sample locations are determined by the specular points corresponding to the Delay Doppler Maps (DDMs). Version 3.2 uses CYGNSS Level 2 (L2) Science Data Record (SDR) Version 3.2 surface wind speeds and ECMWF Reanalysis, Version 5 (ERA5). The Coupled Ocean-Atmosphere Response Experiment (COARE) algorithm is what is used in this dataset to estimate the latent and sensible heat fluxes and their respective transfer coefficients. While COARE's initial intentions were for low to moderate wind speeds, the version used for this product, COARE 3.5, has been verified with direct in situ flux measurements for wind speeds up to 25 m/s. As CYGNSS does not provide air/sea temperature, humidity, surface pressure or density, the producer of this dataset obtains these values from this dataset obtains these values from ERA5. This dataset is made available from 1 August 2018 to present with an approximate 1 week latency in the netCDF-4 formatted data files, where each file contains data within a 24-hour UTC period from a combination of up to 8 unique CYGNSS spacecraft. More information on CYGNSS can be found on the CYGNSS mission page.

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 1 Science Data Record Version 2.1

This Level 1 (L1) dataset contains the Version 2.1 geo-located Delay Doppler Maps (DDMs) calibrated into Power Received (Watts) and Bistatic Radar Cross Section (BRCS) expressed in units of meters squared from the Delay Doppler Mapping Instrument aboard the CYGNSS satellite constellation. This version supersedes Version 2.0. Other useful scientific and engineering measurement parameters include the DDM of Normalized Bistatic Radar Cross Section (NBRCS), the Delay Doppler Map Average (DDMA) of the NBRCS near the specular reflection point, and the Leading Edge Slope (LES) of the integrated delay waveform. The L1 dataset contains a number of other engineering and science measurement parameters, including sets of quality flags/indicators, error estimates, and bias estimates as well as a variety of orbital, spacecraft/sensor health, timekeeping, and geolocation parameters. At most, 8 netCDF data files (each file corresponding to a unique spacecraft in the CYGNSS constellation) are provided each day; under nominal conditions, there are typically 6-8 spacecraft retrieving data each day, but this can be maximized to 8 spacecraft under special circumstances in which higher than normal retrieval frequency is needed (i.e., during tropical storms and or hurricanes). Latency is approximately 6 days (or better) from the last recorded measurement time. The Version 2.1 release represents the second science-quality release. Here is a summary of improvements that reflect the quality of the Version 2.1 data release: 1) data is now available when the CYGNSS satellites are rolled away from nadir during orbital high beta-angle periods, resulting in a significant amount of additional data; 2) correction to coordinate frames result in more accurate estimates of receiver antenna gain at the specular point; 3) improved calibration for analog-to-digital conversion results in better consistency between CYGNSS satellites measurements at nearly the same location and time; 4) improved GPS EIRP and transmit antenna pattern calibration results in significantly reduced PRN-dependence in the observables; 5) improved estimation of the location of the specular point within the DDM; 6) an altitude-dependent scattering area is used to normalize the scattering cross section (v2.0 used a simpler scattering area model that varied with incidence and azimuth angles but not altitude); 7) corrections added for noise floor-dependent biases in scattering cross section and leading edge slope of delay waveform observed in the v2.0 data. Users should also note that the receiver antenna pattern calibration is not applied per-DDM-bin in this v2.1 release.

restrictednotspecifiedApr 2025View details →
nasa32/100

RapidScat Level 2B Climate Ocean Wind Vectors in 12.5km Footprints Version 2.0

This dataset contains the RapidScat Level 2B 12.5km Version 2.0 Climate quality ocean surface wind vectors. The Level 2B wind vectors are binned on a 12.5 km Wind Vector Cell (WVC) grid and processed using the using the "full aperture" normalized radar cross-section (NRCS, a.k.a. Sigma-0) from the L1B dataset. RapidScat is a Ku-band dual beam circular rotating scatterometer retaining much of the same hardware and functionality of QuikSCAT, with exception of the antenna sub-system and digital interface to the International Space Station (ISS) Columbus module, which is where RapidScat is mounted. The NASA mission is officially referred to as ISS-RapidScat. Unlike QuikSCAT, ISS-RapidScat is not in sun-synchronous orbit, and flies at roughly half the altitude with a low inclination angle that restricts data coverage to the tropics and mid-latitude regions; the extent of latitudinal coverage stretches from approximately 61 degrees North to 61 degrees South. Furthermore, there is no consistent local time of day retrieval. The new version has two important improvements over the previous version 1.0. First, an SST-dependent GMF developed by Lucrezia Ricciardulli of Remote Sensing Systems is used in wind retrieval in order to fix persistent speed biases in Ku-band data over cold ocean. Second, flagging is simplified and extra flags are provided. All the previously existing flags are still there and still reflect the same meaning and purpose. A new single bit wind_retrieval_likely_corrupted_flag specifies the approximately 3% of the data which is known to have suboptimal performance due to rain, ice, or a few other rare anomalous cases. Another bit wind_retrieval_possibly_corrupted_flag specifies the approximately 15% of the data near rain, near ice, or near the coast, that is thought to be high quality but may not match up well with numerical wind models due to either remaining rain/ice/land contamination or variability in the winds near ice, rain, and coasts that are not reflected in the NWPs. In addition to these two new bits, copious quality information is provided in the data to allow users to tailor flags to meet their own needs. There is also an added a global attribute called rev_status that specifies whether the RapidScat Instrument was in the original (highest data quality) high SNR mode, or one of the four low SNR time periods, the latter of which indicates the accuracy of winds below 5 m/s is degraded. This attribute also serves to identify MARGINAL orbits in which there are large gaps in the data record due to suboptimal spacecraft attitude. Other than gaps in the data, the accuracy of the winds in the MARGINAL orbits are similar to other orbits. This dataset is provided in netCDF-4 format and made available via FTP and OPeNDAP. For data access, please click on the "Data Access" tab above.

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Ocean Surface Heat Flux Climate Data Record Version 1.0

This dataset contains the first release, Version 1.0, of the CYGNSS Level 2 Ocean Surface Heat Flux Climate Data Record (CDR), which provides the time-tagged and geolocated ocean surface heat flux parameters with 25x25 kilometer footprint resolution with 1-2 month latency from the Delay Doppler Mapping Instrument (DDMI) aboard the CYGNSS satellite constellation. The Cyclone Global Navigation Satellite System (CYGNSS) is a NASA Earth System Science Pathfinder Mission designed to collect the first frequent space-based measurements of surface wind speeds in the inner core of tropical cyclones. The Coupled Ocean-Atmosphere Response Experiment (COARE) version 3.5 algorithm combines CYGNSS L2 CDR v1.0 ocean surface wind speed estimates with the auxiliary parameters provided by the NASA Modern-Era Retrospective Analysis for Research and Applications Version 2 (MERRA-2) to produce latent and sensible heat fluxes and their respective transfer coefficients. More information on how the data is produced and validated can be found in the dataset user guide (see Documentation tab). More information on the CYGNSS mission, spacecraft, instrumentation and related datasets is available here: https://podaac.jpl.nasa.gov/CYGNSS. Additional information on the CYGNSS L2 CDR v1.0 wind speed dataset is available here: https://doi.org/10.5067/CYGNS-L2C10.

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Ocean Surface Heat Flux Science Data Record Version 1.0

This dataset contains the Version 1.0 CYGNSS Level 2 Ocean Surface Heat Flux Science Data Record, which provides the time-tagged and geolocated ocean surface heat flux parameters with 25x25 kilometer footprint resolution from the Delay Doppler Mapping Instrument (DDMI) aboard the CYGNSS satellite constellation. The reported sample locations are determined by the specular points corresponding to the Delay Doppler Maps (DDMs). Only one netCDF-4 data file is produced each day (each file containing data from a combination of up to 8 unique CYGNSS spacecraft) with a latency of approximately 1 to 2 months from the last recorded measurement time. Version 1.0 represents the first release. The Cyclone Global Navigation Satellite System (CYGNSS), launched on 15 December 2016, is a NASA Earth System Science Pathfinder Mission that was launched with the purpose to collect the first frequent space-based measurements of surface wind speeds in the inner core of tropical cyclones. Made up of a constellation of eight micro-satellites, the CYGNSS observatories provide nearly gap-free Earth coverage with a mean (i.e., average) revisit time of seven hours and a median revisit time of three hours. The 35 degree orbital inclination allows CYGNSS to measure ocean surface winds between approximately 38 degrees North and 38 degrees South latitude using an innovative combination of all-weather performance Global Positioning System (GPS) L-band ocean surface reflectometry to penetrate the clouds and heavy precipitation. The Coupled Ocean-Atmosphere Response Experiment (COARE) algorithm is what is used in this dataset to estimate the latent and sensible heat fluxes and their respective transfer coefficients. While COARE's initial intentions were for low to moderate wind speeds, the version used for this product, COARE 3.5, has been verified with direct in situ flux measurements for wind speeds up to 25 m/s. As CYGNSS does not provide air/sea temperature, humidity, surface pressure or density, the producer of this dataset obtains these values from the NASA Modern-Era Retrospective Analysis for Research and Applications Version 2 (MERRA-2), which uses data assimilation to combine all available in situ and satellite observation data with an initial estimate of the atmospheric state, provided by a global atmospheric model. Since the MERRA-2 data is only updated on monthly intervals, this corresponding heat flux dataset is likewise updated on a monthly interval to reflect the latest data available from MERRA-2, thus accounting for measurement latency, with respect to CYGNSS observables, ranging from 1 to 2 months. The data from this release compares well with in situ buoy data, including: Kuroshio Extension Observatory (KEO), National Data Buoy Center (NDBC), Ocean Sustained Interdisciplinary Time-series Environment observation System (OceanSITES), Prediction and Research Moored Array in the Tropical Atlantic (PIRATA), Research Moored Array for African-Asian-Australian Monsoon Analysis and Prediction (RAMA), and the Tropical Atmosphere Ocean (TAO) array. As this marks only the first data release, future work is expected to provide comparisons and validation with various field campaigns (e.g., PISTON, CAMP2Ex) as well as more buoy data, especially at higher flux estimates.

restrictednotspecifiedApr 2025View details →
nasa32/100

CYGNSS Level 2 Ocean Surface Heat Flux Climate Data Record Version 1.2

This dataset contains the third release, Version 1.2, of the CYGNSS Level 2 Ocean Surface Heat Flux Climate Data Record (CDR), which provides the time-tagged and geolocated ocean surface heat flux parameters with 25x25 kilometer footprint resolution with 6-7 day latency from the Delay Doppler Mapping Instrument (DDMI) aboard the Cyclone Global Navigation Satellite System (CYGNSS) constellation. CYGNSS is a NASA Earth System Science Pathfinder Mission designed to collect the first frequent space-based measurements of surface wind speeds in the inner core of tropical cyclones. The Coupled Ocean-Atmosphere Response Experiment (COARE) version 3.5 algorithm combines CYGNSS L2 CDR v1.2 ocean surface wind speed estimates with the auxiliary parameters provided by the European Centre for Medium-Range Weather Forecasts Reanalysis Version 5 (ERA5) to produce latent and sensible heat fluxes and their respective transfer coefficients. More information on how the data is produced and validated can be found in the dataset user guide (see Documentation tab). More information on the CYGNSS mission, spacecraft, instrumentation and related datasets is available here: https://podaac.jpl.nasa.gov/CYGNSS . Additional information on the CYGNSS L2 CDR v1.2 wind speed dataset is available here: https://doi.org/10.5067/CYGNS-L2C12 .

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.