Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
599
datasets available to search
ShareScore release 0.9.0
Dataset results
599 results for “hulled”
Mentha x villosa Huds. var. alopecuroides (Hull) Briq. (BR0000012336562)
Belgium Herbarium image of <a href="https://www.plantentuinmeise.be">Meise Botanic Garden</a>.
Mentha x villosa Huds. var. alopecuroides (Hull) Briq. (BR0000010226704)
Belgium Herbarium image of <a href="https://www.plantentuinmeise.be">Meise Botanic Garden</a>.
Mentha x villosa Huds. var. alopecuroides (Hull) Briq. (BR0000010226308)
Belgium Herbarium image of <a href="https://www.plantentuinmeise.be">Meise Botanic Garden</a>.
Mentha x villosa Huds. var. alopecuroides (Hull) Briq. (BR0000012512744)
Belgium Herbarium image of <a href="https://www.plantentuinmeise.be">Meise Botanic Garden</a>.
Mentha x villosa Huds. var. alopecuroides (Hull) Briq. (BR0000010226667)
Belgium Herbarium image of <a href="https://www.plantentuinmeise.be">Meise Botanic Garden</a>.
Mentha x villosa Huds. var. alopecuroides (Hull) Briq. (BR0000010226902)
Belgium Herbarium image of <a href="https://www.plantentuinmeise.be">Meise Botanic Garden</a>.
Figure 4 in Investigating the risk of non-indigenous species introduction through ship hulls in Chile
Figure 4. Taxa distribution on ships' hulls of the three studied vessels (Esmeralda, USA and ARG tankers) (a) nMDS showing the taxa assemblages in protected vs. exposed areas of the ships' hulls. (b) Taxa richness in exposed and protected areas of the hulls of the three studied vessels. (c) Relationship between the number of taxa found on the hulls and the number of ports visited by each ship.
Figure 6 in Investigating the risk of non-indigenous species introduction through ship hulls in Chile
Figure 6. Distribution of the COI haplotypes of Ciona robusta per sample, with their number indicated in the barplot. For each sample, the number of specimens is indicated in parentheses. The correspondence between the haplotypes found in this study, and those referenced in GenBank is given in Table S3.
Figure 2 in Investigating the risk of non-indigenous species introduction through ship hulls in Chile
Figure 2. Location of the different areas of the vessel from which the samples were obtained. Protected areas: sea box, rope guard, water discharge holes, top of the rudder and the Kort nozzle. Exposed areas: bilge keel, the helm in general and the rudder. Modified from Sylvester and MacIsaac (2010).
Figure 5 in Investigating the risk of non-indigenous species introduction through ship hulls in Chile
Figure 5. Taxa richness recorded in the Talcahuano port on settlement plates made of different types of materials and maintained at different depths for two months total, considering the two periods of time. Values include averages and ± one standard error.
Figure 1 in Investigating the risk of non-indigenous species introduction through ship hulls in Chile
Figure 1. The black circle corresponds to the locality where the sampling was carried out in each type of sampling (ships, settlement plates in the port of Talcahuano and natural substrates in the El Manzano pier).
Figure 3. Graphical representation using a in Investigating the risk of non-indigenous species introduction through ship hulls in Chile
Figure 3. Graphical representation using a nMDS based on Bray-Curtis distances, of the taxa assemblages in each sampling type (ships, settlement plates in the Talcahuano port, and natural substrates at El Manzano pier). Stress value is 0.17.
Weather Data from Hull Springs Farm: 2019-09-29 to 2019-10-15
<p># General Metadata for Hull Springs Farm Atmospheric Sampling Station</p> <p>## Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <p> HSF_weather_YYYY-MM-DD_metadata.txt<br> <br> Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>## File Created</p> <p> * 2019-10-27 by KF<br> <br> ## File Modified</p> <p>## Description</p> <p>These data are from a weather station installed at Hull Springs Farm near the "Yellow House" (38.121683, -76.666781) as part of the Longwood Environmental Observatory.</p> <p>All data are CC-BY and should be cited using the DOI available at https://zenodo.org/communities/leo/</p> <p>## Station Specifics</p> <p> The specific at each site are:</p> <p> * Barometric Pressure (mmHg) - Campbell Scientific CS100 Barometric Pressure Sensor<br> * Light Flux Density (kW/m^2) - Campbell Scientific Pyranometer CS300<br> * Light Total Flux (kJ/m^2) - Campbell Scientific Pyranometer CS300<br> * Rainfall (mm) - Texas Electronics TE525 Tipping Bucket<br> * Temperature (dC) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor<br> * Relative Humidity (%) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor<br> * Wind Speed (m/s) - RM Young 05103 Wind Speed and Direction Sensor<br> * Wind Direction (degrees from true N) - RM Young 05103 Wind Speed and Direction Sensor<br> * Data Collection - Campbell Scientific CR200 Data Logger<br> * The sensors are sampled every 15 minutes<br> <br> ## Measurement Parameters, units, and Variable Names</p> <p> * DATE - the date that the record was collected (YYYY-MM-DD)<br> * TIMESTAMP - the date and time that the record was collected (YYYY-MM-DD HH:MM:SS)<br> * RECORD.x - a unique identifying number provided from the data logger for table 1 from the original downloaded data. <br> * BattV_Avg - The average battery voltage (Volts)<br> * BattV - The battery voltage at the time of the sampling (Volts)<br> * BP_mmHg_Avg - The average barometric pressure over the sampling interval (mmHg)<br> * BP_mmHg_Std - The standard deviation of the average barometric pressure (mmHg)<br> * BP_mmHg - The barometric pressure at the time of the sampling (mmHg)<br> * Rain_mm_Tot - The total rainfall during the sampling interval (mm)<br> * AirTC_Avg - The average air temperature during the sampling interval (dC) <br> * AirTC_Std - The standard deviation of the average air temperature (dC) <br> * AirTC - the air temperature at the time of the sampling (dC)<br> * RH - the relative humidity at the time of the sampling (%)<br> * RH_Min - the minimum relative humidity recorded (%)<br> * RH_TMn - the time that the minimum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) <br> * RH_Max - the maximum relative humidity recorded (%)<br> * RH_TMx - the time that the maximum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS)<br> * RECORD.y - a unique identifying number provided from the data logger for table 1 from the original downloaded data.<br> * BattV_Min - the minimum battery voltage (Volts)<br> * SlrkW_Avg - the average light flux density during the sampling interval (kW/m^2) <br> * SlrkW_Std - the standard deviation of the average light flux density (kW/m^2)<br> * SlrkW - the light flux density at the time of the sampling (kW/m^2)<br> * SlrMJ_Tot - the total light flux (MJ/m^2) <br> * WS_ms_Avg - the average wind speed during the sampling interval (m/s) <br> * WS_ms_Std - the standard deviation of the average wind speed (m/s) <br> * WS_ms - the wind speed at the time of the sampling event (m/s)<br> * WindDir - the wind direction at the time of the sampling event (degrees from true N)<br> * WS_ms_S_WVT - the average wind speed over the previous 15 minutes (m/s)<br> * WindDir_D1_WVT - the average wind direction over the previous 15 minutes (degrees from true N)<br> * WindDir_SD1_WVT - the standard deviation of the average wind direction over the previous 15 minutes (degrees from true N)<br> </p>
Weather Data from Hull Springs Farm: 2019-09-10 to 2019-09-29
<p># General Metadata for Hull Springs Farm Atmospheric Sampling Station</p> <p>## Files</p> <p>Specific metadata for each deployment can be found as text files with the file format of:</p> <p> HSF_weather_YYYY-MM-DD_metadata.txt<br> <br> Where YYYY-MM-DD is the date that the sampling period ended.</p> <p>## File Created</p> <p> * 2019-10-27 by KF<br> <br> ## File Modified</p> <p>## Description</p> <p>These data are from a weather station installed at Hull Springs Farm near the "Yellow House" (38.121683, -76.666781) as part of the Longwood Environmental Observatory.</p> <p>All data are CC-BY and should be cited using the DOI available at https://zenodo.org/communities/leo/</p> <p>## Station Specifics</p> <p> The specific at each site are:</p> <p> * Barometric Pressure (mmHg) - Campbell Scientific CS100 Barometric Pressure Sensor<br> * Light Flux Density (kW/m^2) - Campbell Scientific Pyranometer CS300<br> * Light Total Flux (kJ/m^2) - Campbell Scientific Pyranometer CS300<br> * Rainfall (mm) - Texas Electronics TE525 Tipping Bucket<br> * Temperature (dC) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor<br> * Relative Humidity (%) - Campbell Scientific CS215 Temperature and Relative Humidity Sensor<br> * Wind Speed (m/s) - RM Young 05103 Wind Speed and Direction Sensor<br> * Wind Direction (degrees from true N) - RM Young 05103 Wind Speed and Direction Sensor<br> * Data Collection - Campbell Scientific CR200 Data Logger<br> * The sensors are sampled every 15 minutes<br> <br> ## Measurement Parameters, units, and Variable Names</p> <p> * DATE - the date that the record was collected (YYYY-MM-DD)<br> * TIMESTAMP - the date and time that the datalogger assigned to the record that was collected (YYYY-MM-DD HH:MM:SS)</p> <p> * TIMESTAMP.corr - the date and time that the record was collected (YYYY-MM-DD HH:MM:SS). The date and time on the data logger was set incorrectly when the data collection began so the time stamps from the logger are incorrect. We used the file download time to identify the last actual time that data logger collected a sample and then offset the TIMESTAMP values by the difference between the recorded and actual time of the last sample collection. <br> * RECORD.x - a unique identifying number provided from the data logger for table 1 from the original downloaded data. <br> * BattV_Avg - The average battery voltage (Volts)<br> * BattV - The battery voltage at the time of the sampling (Volts)<br> * BP_mmHg_Avg - The average barometric pressure over the sampling interval (mmHg)<br> * BP_mmHg_Std - The standard deviation of the average barometric pressure (mmHg)<br> * BP_mmHg - The barometric pressure at the time of the sampling (mmHg)<br> * Rain_mm_Tot - The total rainfall during the sampling interval (mm)<br> * AirTC_Avg - The average air temperature during the sampling interval (dC) <br> * AirTC_Std - The standard deviation of the average air temperature (dC) <br> * AirTC - the air temperature at the time of the sampling (dC)<br> * RH - the relative humidity at the time of the sampling (%)<br> * RH_Min - the minimum relative humidity recorded (%)<br> * RH_TMn - the time that the minimum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS) <br> * RH_Max - the maximum relative humidity recorded (%)<br> * RH_TMx - the time that the maximum relative humidity measurement occurred (YYYY-MM-DD HH:MM:SS)<br> * RECORD.y - a unique identifying number provided from the data logger for table 1 from the original downloaded data.<br> * BattV_Min - the minimum battery voltage (Volts)<br> * SlrkW_Avg - the average light flux density during the sampling interval (kW/m^2) <br> * SlrkW_Std - the standard deviation of the average light flux density (kW/m^2)<br> * SlrkW - the light flux density at the time of the sampling (kW/m^2)<br> * SlrMJ_Tot - the total light flux (MJ/m^2) <br> * WS_ms_Avg - the average wind speed during the sampling interval (m/s) <br> * WS_ms_Std - the standard deviation of the average wind speed (m/s) <br> * WS_ms - the wind speed at the time of the sampling event (m/s)<br> * WindDir - the wind direction at the time of the sampling event (degrees from true N)<br> * WS_ms_S_WVT - the average wind speed over the previous 15 minutes (m/s)<br> * WindDir_D1_WVT - the average wind direction over the previous 15 minutes (degrees from true N)<br> * WindDir_SD1_WVT - the standard deviation of the average wind direction over the previous 15 minutes (degrees from true N)<br> </p>
FIGURE 5. Panthera atrox reconstruction showing differences between simple convex hulls and more complex reconstructions. 1 in Reconstruction of the musculoskeletal system in an extinct lion
FIGURE 5. Panthera atrox reconstruction showing differences between simple convex hulls and more complex reconstructions. 1, Reconstructed muscles overlaid on the convex hull of just the bones. Any muscles that are visible extend beyond the range of the convex hull, thereby demonstrating the underestimation of size by convex hulls based solely on bones. 2, Reconstructions showing the posteroventral movement of the centre of mass (COM) between the bone convex hull and the muscled convex hull models of Panthera atrox. Scale bar is 50 cm.
Linked collectors and determiners for: Afrotropical Asilidae (Diptera) 20. The genus Pycnomerinx Hull, 1962 (Stenopogoninae).
Natural history specimen data linked to collectors and determiners held within, "Afrotropical Asilidae (Diptera) 20. The genus Pycnomerinx Hull, 1962 (Stenopogoninae)". Claims or attributions were made on Bionomia by volunteer Scribes, <a href="https://bionomia.net/dataset/1c3b06ab-c016-416b-b334-f08d4fb4160b">https://bionomia.net/dataset/1c3b06ab-c016-416b-b334-f08d4fb4160b</a> using specimen data from the dataset aggregated by the Global Biodiversity Information Facility, <a href="https://gbif.org/dataset/1c3b06ab-c016-416b-b334-f08d4fb4160b">https://gbif.org/dataset/1c3b06ab-c016-416b-b334-f08d4fb4160b</a>. Formatted as a Frictionless Data package.
Linked collectors and determiners for: Description of the female of Syrittosyrphus opacea Hull, 1944 (Diptera, Syrphidae, Eristalinae) with additional notes on the genus.
Natural history specimen data linked to collectors and determiners held within, "Description of the female of Syrittosyrphus opacea Hull, 1944 (Diptera, Syrphidae, Eristalinae) with additional notes on the genus". Claims or attributions were made on Bionomia by volunteer Scribes, <a href="https://bionomia.net/dataset/c96d8c18-56f6-4f64-817a-2e90cc58a8e3">https://bionomia.net/dataset/c96d8c18-56f6-4f64-817a-2e90cc58a8e3</a> using specimen data from the dataset aggregated by the Global Biodiversity Information Facility, <a href="https://gbif.org/dataset/c96d8c18-56f6-4f64-817a-2e90cc58a8e3">https://gbif.org/dataset/c96d8c18-56f6-4f64-817a-2e90cc58a8e3</a>. Formatted as a Frictionless Data package.
Linked collectors and determiners for: Current condition of Bathypogon types (Diptera: Asilidae) described by Frank M Hull and housed in the South Australian Museum of Natural History with notes on other Bathypogon types.
Natural history specimen data linked to collectors and determiners held within, "Current condition of Bathypogon types (Diptera: Asilidae) described by Frank M Hull and housed in the South Australian Museum of Natural History with notes on other Bathypogon types". Claims or attributions were made on Bionomia by volunteer Scribes, <a href="https://bionomia.net/dataset/4f3d0560-a128-404c-a543-c2e6044af21e">https://bionomia.net/dataset/4f3d0560-a128-404c-a543-c2e6044af21e</a> using specimen data from the dataset aggregated by the Global Biodiversity Information Facility, <a href="https://gbif.org/dataset/4f3d0560-a128-404c-a543-c2e6044af21e">https://gbif.org/dataset/4f3d0560-a128-404c-a543-c2e6044af21e</a>. Formatted as a Frictionless Data package.
Hull Springs Dock YSI Station 2021-06-09 to 2021-07-15
<pre># General Metadata for Hull Springs Dock-YSI Sampling Station ## Files Specific metadata for each deployment can be found as text files with the file format of: HS_YSI_YYYY-MM-DD_metadata.txt Where YYYY-MM-DD is the date that the sampling period ended. NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning. ## File Created * 2021-07-14 by KF ## File Modified ## Description These data are from the YSI EXO3 sampling station in Aimes Creek near the lab dock (38.125367, -76.659537). All data are CC-BY and should be cited using the DOI available at https://zenodo.org/communities/leo/ ## Station Specifics The sensors are sampled every 15 minutes ### Measurements Parameters, units, and Variable Names * date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS) * date - the date that the record was collected ( * time - the time that the record was collected ( * site_name - the ID name provided by the KOR software. * unit_ID - the sonde identification number. * user_ID - the user that created the sampling template. * Temp_dC - the water temperature in degrees C. * DO_perc - the dissolved oxygen percent saturation (%). * DO_percL - the "local" dissolved oxygen percent saturation where the calibration is locally always 100% saturated independent of the barometric pressure (%). * DO_mg-L - the concentration of dissolved oxygen (mg/L). * SPC_uS-cm - the specific conductance (uS/cm). * C_uS-cm - the conductivity (uS/cm). * nLFC_uS-cm * TDS_mg-L - the total dissolved solids (mg/L). * SAL_PSU - the salinity of the water (PSU). * pH - the pH of the water. * pH_mV - the millivolt measurement of the pH meter (mV). * FNU - the turbidity of the water (FNU). * TSS_mg-L - the total suspended solids (mg/L). * BGA_PC_RFU - the phycocyanin fluorescence level which is an indicator of blue-green algae (RFU). * BGC_PC_ug-L - the concentration of phycocyanin in the water, which is an indicator of blue-green algae (ug/L). * Chl_RFU - the chlorophyll fluorescence level, which is an indicator of phytoplankton biomass (RFU). * Chl_ug-L - the concentration of chlorophyll in the water, which is an indicator of phytoplankton biomass (ug/L). * fDOM_RFU - the fluorescent DOM fluorescence level (RFU). * fDOM_QSU - the standardized fluorescent DOM concentration (QSU). * Wiper_V - the voltage output of the wiper (V). * Cabel_V - the voltage output of the cable (V). * Batt_V - the voltage output of the internal batteries (V).</pre>
Hull Springs Wetland Water Depth and Temperature Data from 2021-06-11 to 2021-07-16
<pre># General Metadata for Hull Springs Restored Wetland Sampling Station ## Files Specific metadata for each deployment and sensor can be found as text files with the file format of: HS_wetland_DO_YYYY-MM-DD_metadata.txt HS_wetland_pressure_trans_YYYY-MM-DD_metadata.txt HS_wetland_CT_YYYY-MM-DD_metadata.txt Where YYYY-MM-DD is the date that the sampling period ended. NOTE: The metadata in the above file is collected from the data logger and does not have all of fields present in the final data set, because some were created during data cleaning. Details on how the data were cleaned and variables created can be found at in the cleaning scripts on Gitlab [https://gitlab.com/leo147/leo/-/tree/master/lab_notebook/data_processing/cleaning_scripts](https://gitlab.com/leo147/leo/-/tree/master/lab_notebook/data_processing/cleaning_scripts). ## File Created * 2021-06-16 by KF ## File Modified * 2021-07-22 by KF - added general metadata for the pressure transducer and the CT sensor. ## Description These data are from the sampling station in the restored wetland at Hull Springs. The sensors are in the NE corner of the shallow pond portion of the restored wetland (38.119289, -76.667252). All data are CC-BY and should be cited using the DOI available at https://zenodo.org/communities/leo/ ## Station Specifics The specific at each site are: * Temperature (dC) and Dissolved Oxygen (mg/l) are collected with a Onset HOBO U26-001 Dissolved Oxygen Logger * Temperature (dC) and Pressure (mmHg) are collected with an Onset HOBO U20-001-01 Water Level Logger * Temperature (dC) and Conductivity are collected with an Onset HOBO U24-001 Conductivity Logger The sensors are sampled every 15 minutes ## Measurement Parameters, units, and Variable Names * date.time - the date and time that the record was collected, reported in POSIX standard time (YYYY-MM-DD HH:MM:SS) * date.time.adj - the date and time of the pressure measurement that was adjusted to match the barometric pressure measurement from the weather station. * observation - the incremental number of each observation * timestamp - the data and time that the record was collected, as reported by the data logger (MM/DD/YY HH:MM:SS A/PM) * DO - the concentration of dissolved oxygen in the water (mg/L) * Temp - the temperature of the water (dC) * Pressure - the pressure recorded by the underwater pressure transducer (kPa) * press_mmHg - the pressure recorded by the underwater pressure transducer (mm Hg) * BP_mmHg - the barometric pressure recorded by the weather station at the Yellow House (mm Hg) * Z - the depth of the water at the wetland sampling station (cm) * Low_Range_CT - the conductivity read from 0 - 2500 uS/cm (uS/cm) * Full_Range_CT - the conductivity read from 0 - 15000 uS/cm (mmHg) </pre>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.