Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

1,989

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

1,989 results for “Fires”

Learn how ShareScore rates datasets ↗
nasa28/100

Carbon Monitoring System Carbon Flux for Fire L4 V1 (CMSFluxFire) at GES DISC

This dataset provides the Carbon Flux for Fires.The NASA Carbon Monitoring System (CMS) is designed to make significant contributions in characterizing, quantifying, understanding, and predicting the evolution of global carbon sources and sinks through improved monitoring of carbon stocks and fluxes. The System will use the full range of NASA satellite observations and modeling/analysis capabilities to establish the accuracy, quantitative uncertainties, and utility of products for supporting national and international policy, regulatory, and management activities. CMS will maintain a global emphasis while providing finer scale regional information, utilizing space-based and surface-based data and will rapidly initiate generation and distribution of products both for user evaluation and to inform near-term policy development and planning.

restrictednotspecifiedApr 2025View details →
nasa28/100

CARVE: Alaskan Fire Emissions Database (AKFED), 2001-2013

This data set provides estimates of annual carbon emissions (kg carbon per square meter) from boreal fires at 450-m resolution for the state of Alaska between 2001 and 2013. To produce these data, daily burned area for 2001 to 2013 was mapped using imagery from the Moderate Resolution Imaging Spectroradiometer (MODIS) combined with perimeters from the Alaska Large Fire Database. Carbon consumption was calibrated using available field measurements from black spruce forests in Alaska. Above- and below-ground carbon consumption were modeled based on environmental variables including elevation, day of burning within the fire season, pre-fire tree cover and the differenced normalized burn ratio (dNBR). Modeled uncertainties in carbon consumption are included in the data set. The derived burn area and carbon emissions product, referred to as the Alaskan Fire Emissions Database (AKFED), provides a resource for study of the environmental controls on daily fire dynamics, boreal fire emissions in biogeochemical models, and potential feedbacks from changing fire regimes. There are 26 data files in GeoTIFF (.tif) format with this data set. There are 13 *.tifs for carbon consumption, one for each year, and 13 *.tifs for carbon consumption uncertainty, one for each year.

restrictednotspecifiedApr 2025View details →
nasa28/100

VIIRS/JPSS1 Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT - V2

The VIIRS/JPSS1 Thermal Anomalies/Fire 6-Min L2 Swath 750m NRT product, short-name VJ114_NRT is based on the MODIS Fire algorithm. The input to the Active Fires production are Level-1B moderate-resolution reflective band M7, and emissive bands M13 and M15. The fire algorithm first calculates bands M13, M15 brightness temperature (BT) statistics for a group of background pixels adjacent to each potential fire pixel. These statistics are used to set thresholds for several contextual fire detection tests. There is also an absolute fire detection test based on a pre-set M13 BT threshold. If the results of the absolute and relative fire detection tests meet certain criteria, the pixel is labeled as fire. The designation of a pixel as fire from the results of the BT threshold tests may be overridden under sun glint conditions or if too few pixels were used to calculate the background statistics.The VJ114_NRT product contains several pieces of information for each fire pixel: pixel coordinates, latitude and longitude, pixel M7 reflectance, background M7 reflectance, pixel M13 and M15 BT, background M13 and M15 BT, mean background BT difference, background M13, M15, and BT difference mean absolute deviation, fire radiative power, number of adjacent cloud pixels, number of adjacent water pixels, background window size, number of valid background pixels, detection confidence, land pixel flag, background M7 reflectance, and reflectance mean absolute deviation.The product provides day and nighttime active fire detection over land and water (from gas flares). The VJ114 product provides fire data continuity with NASA's EOS MODIS 1 km fire product. For more information visit University of Maryland VIIRS Active Fire Web page at http://viirsfire.geog.umd.edu/

restrictednotspecifiedApr 2025View details →
nasa28/100

MODIS/Terra Thermal Anomalies/Fire 8-Day L3 Global 1km SIN Grid V061

The Terra Moderate Resolution Imaging Spectroradiometer (MODIS) Thermal Anomalies and Fire 8-Day (MOD14A2) Version 6.1 data are generated at 1 kilometer (km) spatial resolution as a Level 3 product. The MOD14A2 gridded composite contains the maximum value of the individual fire pixel classes detected during the eight days of acquisition.The Science Dataset (SDS) layers include the fire mask and pixel quality indicators.Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).

restrictednotspecifiedApr 2025View details →
nasa28/100

CMS: Fire Weather Indices for Interior Alaska, 2001-2010

This dataset provides daily fire weather indices for interior Alaska during the active fire seasons from 2001 to 2010. Data are gridded at 60-m resolution. The active fire season is defined as May 24-September 18 (days of the year 144-261) in this dataset. Fire weather is the use of meteorological parameters such as relative humidity, wind speed and direction, cloud cover, mixing heights, and soil moisture to determine whether conditions are favorable for fire growth and smoke dispersion. The six indices provided in this dataset are defined and produced following the methodology of the Canadian Forest Fire Weather Index System: Fine Fuel Moisture Code, Duff Moisture Code, Drought Code, Initial Spread Index, Buildup Index, Fire Weather Index. The dataset was developed following point source data interpolation from weather station observations.

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Cirrus 2 High-Resolution Interferometer Sounder (HIS) Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to seek the basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between ISCCP data, GCM parameterizations, and higher space and time resolution cloud data. To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13 - November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29 - July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13 - December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1 - June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems.The High-resolution Interferometer Sounder (HIS) was flown on board the NASA ER-2 aircraft during FIRE Cirrus Phase II in Coffeyville, Kansas. The HIS measured upwelling calibrated radiances and was positioned to to capture a nadir view along the ER-2 flight tracks.

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Cirrus 2 Volume Imaging Lidar (VIL) Altitude vs. Time (RTI) Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to seek the basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between ISCCP data, GCM parameterizations, and higher space and time resolution cloud data. To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13 - November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29 - July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13 - December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1 - June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems.This data set contains altitude vs. time images (RTIs) of cirrus clouds collected during FIRE Cirrus 2 at Coffeyville, Kansas. The images were sampled at 5 km intervals in the cross wind scans.

restrictednotspecifiedApr 2025View details →
nasa28/100

MiCASA Daily NPP Rh ATMC NEE FIRE FUEL Fluxes 0.1 degree x 0.1 degree

MiCASA is an extensive revision of CASA-GFED3. CASA-GFED3 derives from Potter et al. (1993), diverging in development since Randerson et al. (1996). CASA is a light use efficiency model: NPP is expressed as the product of photosynthetically active solar radiation, a light use efficiency parameter, scalars that capture temperature and moisture limitations, and fractional absorption of photosynthetically active radiation (fPAR) by the vegetation canopy derived from satellite data. Fire parameterization was incorporated into the model by van der Werf et al. (2004) leading to CASA-GFED3 after several revisions (van der Werf et al., 2006, 2010). Development of the GFED module has continued, now at GFED5 (Chen et al., 2023) with less focus on the CASA module. MiCASA diverges from GFED development at version 3, although future reconciliation is possible. Input datasets include air temperature, precipitation, incident solar radiation, a soil classification map, and several satellite derived products. These products are primarily based on Moderate Resolution Imaging Spectroradiometer (MODIS) Terra and Aqua combined datasets including land cover classification (MCD12Q1), burned area (MCD64A1), Nadir BRDF-Adjusted Reflectance (NBAR; MCD43A4), from which fPAR is derived, and tree/herbaceous/bare vegetated fractions from Terra only (MOD44B). Emissions due to fire and burning of coarse woody debris (fuel wood) are estimated separately.

restrictednotspecifiedApr 2025View details →
nasa28/100

ABoVE: Burn Severity, Fire Progression, Landcover and Field Data, NWT, Canada, 2014

This data set provides peatland landcover classification maps, fire progression maps, and vegetation community biophysical data collected from areas that were burned by wildfire in 2014 in the Northwest Territories, Canada. The peatland maps include peatland type (bog, fen, marsh, swamp) and level of biomass (open, forested). The fire progression maps enabled an assessment of wildfire progression rates at a daily time scale. Field data, collected in 2015, include an estimate of burn severity, woody seedling/sprouting data, soil moisture, and tree diameter and height of burned sites and similar vegetation characterization at landcover validation sites.

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Cirrus 1 NASA ER-2 Cloud Lidar System Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to improve basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between the ISCCP data, GCM parameterizations, and higher space and time resolution cloud data.To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13-November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29-July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13-December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1-June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems. This data set contains cloud top height and ground height calculations from the NASA ER-2 Cloud LIDAR System (CLS) during the Wisconsin FIRE experiment in October, 1986.

restrictednotspecifiedApr 2025View details →
nasa28/100

BOREAS TGB-05 Fire History of Manitoba 1980 to 1991 in Vector Format

This vector format data set covers the province of Manitoba and was produced by Forestry Canada from hand-drawn boundaries of fires on photocopies of 1:250,000 scale maps. The locational accuracy of the data is considered fair to poor. When the locations of some fire boundaries were compared to Landsat TM images, they were found to be off by as much as a few kilometers.

restrictednotspecifiedApr 2025View details →
nasa28/100

LBA-ECO LC-35 Landsat ETM+ Derived Active Fire Masks, Brazilian Amazon: 2001-2003

This data set provides active fire detection images and associated summary information derived from Landsat 7 Enhanced Thematic Mapper Plus (ETM+) images for various locations in Brazilian Amazonia during 2001-2003. There are two image types: (1) GeoTiff images (masks) of active fire pixels, and (2) GeoTiff images (masks) of clustered active fire pixels where a distinct cluster identification number has been assigned to each individual group of contiguous active fire pixels. There are 122 GeoTiff format files of each type of fire mask; a total of 244 images. The spatial resolution of the fire mask images is 30 meters. ETM+ images were selected based on data quality, availability, as well as on the occurrence of vegetation fires.In addition to the two image types, there are also two types of fire pixel summary information provided in text files: (1) one file of active fire pixel summary information derived from the active fire pixel images, and (2) 122 files of clustered active fire pixel information derived from individual clustered fire pixel masks, each of which correspond to a clustered image.

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Marine Stratocumulus Microwave Radiometer Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to seek the basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between ISCCP data, GCM parameterizations, and higher space and time resolution cloud data. To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13 - November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29 - July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13 - December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1 - June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems.Microwave radiometer with steerable antenna was used for the measurement of column amounts of liquid water in clouds, and precipitable water vapor in the atmosphere. Antenna was directed to the zenith during FIRE I.Operating frequencies: 20.6, 31.65, 90.0 GHzSpatial resolution: 2.5 deg antenna beamwidth (44m @ 1.0 km range)Temporal resolution: 60 secEstimated accuracies Liquid water: +/- 10 percent or better (absolute) Noise level +/- .025 mm Water vapor: 0.08 cm rms relative to radiosonde (Vapor and liquid data retrievals were from 20.6 and 31.65 GHz data only)Radiometer location: San Nicolas Island, northwestern tip 33.27N, 119.58W

restrictednotspecifiedApr 2025View details →
nasa28/100

MODIS/Terra Thermal Anomalies/Fire 5-Min L2 Swath 1km V061

The Moderate Resolution Imaging Spectroradiometer (MODIS) Thermal Anomalies and Fire MOD14 Version 6.1 product is produced daily in 5-minute temporal satellite increments (swaths) at 1 kilometer (km) spatial resolution. The MOD14 product is used to generate all of the higher level fire products, but can also be used to identify fires and other thermal anomalies, such as volcanoes. Each swath of data is approximately 2,030 kilometers along track (long), and 2,300 kilometers across track (wide). Known Issues* For complete information about known issues please refer to the [MODIS/VIIRS Land Quality Assessment website](https://landweb.modaps.eosdis.nasa.gov/knownissue?sensor=MODIS&sat=Terra&as=61).Improvements/Changes from Previous Versions* The Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 - 2017.* A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Cirrus Phase II Colorado State University (CSU) Wind Profiler Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to improve basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between the ISCCP data, GCM parameterizations, and higher space and time resolution cloud data.To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13-November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29-July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13-December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1-June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems.The Colorado State University (CSU) wind profiler data set was produced by the Department of Atmospheric Sciences of CSU as part of the FIRE Phase II Cirrus Intensive Field Observations (IFO) conducted in Coffeyville, Kansas. The CSU wind profiler data were collected during the period from Nov. 12, 1991 to Dec. 7, 1991 at the Parsons KG&E Power Plant, Parsons, Kansas (37 deg. 18 min. N and 95 deg. 07 min. W).

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Cirrus Phase II University of North Dakota Citation Aircraft Particle Measuring System Probe Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to improve basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between the ISCCP data, GCM parameterizations, and higher space and time resolution cloud data.To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13-November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29-July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13-December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1-June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems. The University of North Dakota owns and operates a Cessna Citation II aircraft (N77ND) for the purpose of atmospheric research. This aircraft type has a number of design and performance characteristics which make it an ideal platform for a wide range of atmospheric studies. A series of structural modifications have been made to the basic airplane. These include the following: pylons under the wing tips for a variety of probes in the undisturbed air flow away from the fuselage; a nose boom for wind measurement; a heated radome to prevent ice accumulation on the nose area; special mounts for upward and downward looking radiometers; side-facing camera mounts for time-lapse cameras; optically-flat glass windows for photography; and an air inlet port for air sampling inside the pressurized cabin. The research instrumentation available on the Citation for the second Cirrus IFO is described below.The basic instrumentation package measured temperature, dew point temperature, pressure, wind and cloud microphysical characteristic along with aircraft position, altitude and performance parameters. The three-dimensional wind field is derived from measurements of acceleration, pitch, roll and yaw combined with angles of attack and sideslip and indicated airspeed. The aircraft parameters were supplied by an LTN-76 inertial navigation system and a Global Positioning System (GPS). Turbulence intensity can be derived from differential pressure transducers and INS accelerometer outputs. Cloud microphysical measurements were made with an array of Particle Measuring Systems probes (FSSP, 1D-C,2D-C,1D-P) mounted on the wing-tip pylons. These probes measure concentrations and sizes of particles from one micrometer to several millimeters in diameter. In addition there were probes to measure both liquid water content and icing rate. Several gas and aerosol sampling instruments were available. These include fast response O3 and NO2 monitors, and a condensation nuclei counter. A forward or side-looking video camera was also used to provide a visual record of flight conditions. The data were sampled at various rate from 1 to 24 sec-1. The sampling is controlled by the on-board computer system which also displayed the data in real time in graphic and alphanumeric formats while recording them on magnetic tape.

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Cirrus Phase II NCAR Sabreliner Aircraft Microphysical Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to seek the basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between ISCCP data, GCM parameterizations, and higher space and time resolution cloud data. To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13 - November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29 - July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13 - December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1 - June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems. The microphysical parameters in the data set were derived from 2D probe data collected by the NCAR aircraft during FIRE II. The 2D-C data are converted to size spectra according to the guidelines given in Heymsfield and Baumgardner (1985, Bull. Amer. Meteoro. Soc.), where one element is added to the size of a particle along the the flight direction to account for the probe's intrinsic start-up time. Size is determined as the maximum dimension ($D_{max}$) along the flight direction or optical array axis. The nominal size resolution for the Sabreliner 2D probe is 50 microns/per shadowed optical array element, for the King Air is 25 microns/bin. Sample area (SA) is derived using the depth of field estimates reported by Knollenberg (1970). Particles are binned into 32 size categories, nonuniformly spaced with higher resolution in the smaller classes. Particles within each size bin are subdivided into 10 ``area ratio (AR)'' bins, where AR represents the ratio of particle area to the area of discs of diameter $D_{max} The microphysical parameters in the data set were derived from 2D probe data collected by the NCAR Sabreliner during FIRE II. The derivation of the microphysical parameters is outlined in the later reference to Heymsfield (1977). The vertical velocity is the steady-state velocity in cm s-1 to keep the relative humidity at it's currently measured value. Differential growth rate represents the growth rate of the particle population of different sizes at the current relative humidity. The Total differential growth rate is thesum of the growth rate in all channels. The assumptions used for the IWC calculations are reported in Heymsfield; also, generic size to mass equations are used. Precipitation rate is calculated from particle size and terminal velocity data, integrated over the size spectrum. Concentration data are as derived above. Number of crystal-crystal collisions are derived from the data reported by Hindman and the crystal terminal velocities. Water vapor density andsupersaturation information in this data set should not be used--it is unreliable. Curve fits to the data using least squares methods are provided. VARIABLE DESCRIPTION UNITS ------------------------------------------------------------------------------- IT1,IT2 MEASUREMENT TIME INTERVAL HH/MM/SS PS STATIC PRESSURE mb TEMP AMBIENT TEMPERATURE degreesC ALT PRESSURE ALTITUDE m USTAR VERTICAL VELOCITY NEEDED TO KEEP THE cm/s RELATIVE HUMIDITY CONSTANT DBARM MEDIAN PARTICLE MASS WEIGHTED DIAMETER cm DMAX MAXIMUM PARTICLE DIAMETER cm W1 DIFFUSIONAL GROWTH RATE IN CHANNEL 1 g/sec W2 DIFFUSIONAL GROWTH RATE IN CHANNEL 2 g/sec W3 DIFFUSIONAL GROWTH RATE IN CHANNEL 3 g/sec W4 DIFFUSIONAL GROWTH RATE IN CHANNEL 4 g/sec WTOT TOTAL DIFFUSTIONAL GROWTH RATE g/sec DT8 DEPLETION TIME (8 micron droplets) sec DT12 DEPLETION TIME (12 micron droplets) sec TMASS1 IWC IN CHANNEL 1 g/m^3 TMASS2 IWC IN CHANNEL 2 g/m^3 DPTC DEW POINT TEMPERATURE (EG&G) degreesC RH RELATIVE HUMIDITY (EG&G) % RIWC ICE WATER CONTENT g/m^3 XM1 ICE WATER CONTENT BASED ON SNOW HABIT g/m^3 XM2 ICE WATER CONTENT BASED ON SMALL SNOW g/m^3 HABIT XM3 ICE WATER CONTENT BASED ON LARGE SNOW g/m^3 HABIT R PRECIPITATION RATE mm/hr DBZ RADAR REFLECTIVITY FACTOR decibels VBAR MEAN REFLECTIVITY WEIGHTED WITH THE cm/s TERMINAL VELOCITY TTCONC TOTAL PARTICLE CONCENTRATION #/L CBIN1 PARTICLE CONCENTRATION WITHIN THE RANGE 200#/L LE CBIN2 PARTICLE CONCENTRATION WITHIN THE RANGE #/L 200-500 CBIN3 PARTICLE CONCENTRATION WITHIN THE RANGE 500-800 #/L CBIN4 PARTICLE CONCENTRATION WITHIN THE RANGE 800 #/L GT CE8 COLLECTION EFFICIENCY (8 micron none droplets) CE12 COLLECTION EFFICIENCY (12 micron none droplets) TMASS3 IWC IN CHANNEL 3 g/m^3 TMASS4 IWC IN CHANNEL 4 g/m^3 TIMP # OF CRYSTAL-CRYSTAL COLUMNS sec^(1-) RHORH WATER VAPOR DENSITY g/cm^3 SI SUPERSATURATION WITH RESPECT TO ICE % SW SUP

restrictednotspecifiedApr 2025View details →
nasa28/100

First ISCCP Regional Experiment (FIRE) Cirrus Phase II National Weather Service(NWS) Inner-Network Rawinsonde Data

The First ISCCP Regional Experiments have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to seek the basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between ISCCP data, GCM parameterizations, and higher space and time resolution cloud data. To-date, four intensive field-observation periods were planned and executed: a cirrus IFO (October 13 - November 2, 1986); a marine stratocumulus IFO off the southwestern coast of California (June 29 - July 20, 1987); a second cirrus IFO in southeastern Kansas (November 13 - December 7, 1991); and a second marine stratocumulus IFO in the eastern North Atlantic Ocean (June 1 - June 28, 1992). Each mission combined coordinated satellite, airborne, and surface observations with modeling studies to investigate the cloud properties and physical processes of the cloud systems.The FIRE_CI2_NWS_IN_SND data set was collected for the period Nov. 13, 1991 to Dec. 7, 1991. Each granule has multiple ASCII data files. Data were collected from 17 different National Weather Service (NWS) sites. These sites are: (ABQ) Albuquerque, NM; (AMA) Amarillo, TX; (DDC) Dodge City, KS; (DEN) Denver, CO; (DRT) Del Rio, TX; (ELP) El Paso, TX; (GGG) Longview, TX; (LBF) North Platte, NE; (LIT) North Little Rock, AR; (MAF) Midland, TX; (OMA) Omaha, NE; (OUN) Norman, OK; (PAH) Paducah, KY; (PIA) Peoria, IL; (SEP) Stephenville, TX; (TOP)Topeka, KS; and (UMN) Monett, MO.

restrictednotspecifiedApr 2025View details →
geo24/100

KMT2C/KMT2D-dependent H3K4me1 mediates DNA replication timing and origin firing

GEO Series GSE277790. Mus musculus. 12 samples. Type: Other.

openGEO-OpenFeb 2025View details →
geo24/100

Rif1 is a global regulator of timing of replication origin firing in fission yeast

GEO Series GSE34369. Schizosaccharomyces pombe. 7 samples. Type: Genome binding/occupancy profiling by genome tiling array.

openGEO-OpenDec 2011View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.