Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
977
datasets available to search
ShareScore release 0.9.0
Dataset results
977 results for “calculations”
Dataset: Assessing MP2 frozen natural orbitals in relativistic correlated electronic structure calculations
<p>This dataset collects the unprocessed (= outputs from calculations) results discussed in the paper titled "Assessing MP2 frozen natural orbitals in relativistic correlated electronic structure calculations", by Xiang Yuan, Luvas Visscher and Andre Severo Pereira Gomes. It also contains the figures used in the manuscript.</p>
Input for Bayesloc calculations for locating the 27 February 2022 Lop Nor earthquake
<p>Steven J Gibbons, NGI<br> 2022-04-04</p> <p>The directories contained within this tar file contain all the files needed to calculate the location estimates<br> of the 2022-02-27 Lop Nor earthquake using the Bayesloc program with various sets of<br> inputs.<br> No output is included, only the input files:</p> <p>bayesloc.cfg<br> arrival.dat<br> station.dat<br> origin_prior.dat<br> and any traveltime tables needed.</p> <p>In each directory, the Bayesloc program is run by typing</p> <p>bayesloc bayesloc.cfg</p> <p>The directories are as follows:</p> <p>(a) USGS_P1only_singleevent<br> The following 5 files needed to locate using only the first P arrivals<br> in the NEIC solution (see Data and resources)</p> <p> ak135_P1.dat arrival.dat bayesloc.cfg origin_prior.dat station.dat</p> <p>(b) superset_singleevent<br> The following 6 files needed to locate using a set of arrivals based upon<br> the USGS arrivals, selected arrivals from the file ISC_info_20220402.txt,<br> and manual picks made from open stations available from IRIS.</p> <p> ak135_P1.dat ak135_S1.dat arrival.dat bayesloc.cfg origin_prior.dat station.dat</p> <p>(c) 11 different directories<br> fisk_900526<br> fisk_900816<br> fisk_920521<br> fisk_920925<br> fisk_931005<br> fisk_940610<br> fisk_941007<br> fisk_950515<br> fisk_950817<br> fisk_960608<br> fisk_960729<br> <br> In each of these directories, there are the files<br> ak135_P1.dat arrival.dat bayesloc.cfg origin_prior.dat station.dat<br> needed to locate one of the 11 nuclear explosions described in Fisk (2002)<br> on an event by event basis.</p> <p>(d) all_events_joint_USGSonly_fixedGT</p> <p> This solves for the location of the 20220227 event simultaneously with the<br> locations of the 11 GT nuclear tests, using only those arrivals chosen from<br> the USGS solution for the 20220227 event<br> (i.e. the arrivals in the directory USGS_P1only_singleevent )</p> <p> This directory contains five files<br> ak135_P1.dat arrival.dat bayesloc.cfg origin_prior.dat station.dat</p> <p>(e) all_events_joint_superset_fixedGT</p> <p> This solves for the location of the 20220227 event simultaneously with the<br> locations of the 11 GT nuclear tests, using the arrivals from the 20220227<br> event "superset" (i.e. the arrivals in the directory superset_singleevent )</p> <p> This directory contains six files<br> ak135_P1.dat ak135_S1.dat arrival.dat bayesloc.cfg origin_prior.dat station.dat</p> <p>The image "locations_panel.png" contains the output from each of the Bayesloc<br> calculations in these directories, plus a few others using the same input files but with<br> changes to the origin_prior.dat files such that the GT events are not fixed to the locations<br> specified by Fisk (2002).</p> <p>Panel (a) displays the bulletin location estimates listed in the file<br> "ISC_info_20220402.txt" together with the GT locations of the nuclear tests provided by<br> Fisk (2002).</p> <p>Panel (b) displays the results from the single event location runs: i.e. the outputs<br> from all of the directories</p> <p>fisk_900526<br> fisk_900816<br> fisk_920521<br> fisk_920925<br> fisk_931005<br> fisk_940610<br> fisk_941007<br> fisk_950515<br> fisk_950817<br> fisk_960608<br> fisk_960729<br> superset_singleevent<br> USGS_P1only_singleevent</p> <p>Panel (c) displays the locations when the files in the directory<br> all_events_joint_superset_fixedGT are run but with modifications<br> to the origin_prior.dat file to remove the 1 km lateral constraint on the GT<br> events. In addition, the brown points on this map are the output from<br> the directory all_events_joint_USGSonly_fixedGT but with the origin_prior.dat<br> modified to remove the constraints of the GT events.</p> <p>Panel (d) displays the locations when the files in the directory<br> all_events_joint_superset_fixedGT are run as they are.<br> In addition, the brown points on this map are the output from<br> the directory all_events_joint_USGSonly_fixedGT.</p> <p>In panels (c) and (d) the nuclear explosion locations are only displayed<br> for the calculations in the all_events_joint_superset_fixedGT directory.<br> The locations for these events obtained in the all_events_joint_USGSonly_fixedGT<br> directory are very similar.</p> <p>Data and resources<br> ------------------</p> <p>The Bayesloc probabilistic multiple seismic event location software was obtained from<br> <a href="https://www-gs.llnl.gov/nuclear-threat-reduction/nuclear-explosion-monitoring/bayesloc">https://www-gs.llnl.gov/nuclear-threat-reduction/nuclear-explosion-monitoring/bayesloc</a><br> (last accessed April 2022).</p> <p>The file ISC_info_20220402.txt is the output from a search of<br> <a href="http://www.isc.ac.uk/iscbulletin/">http://www.isc.ac.uk/iscbulletin/</a><br> performed on April 2, 2022. (ISC, 2022)</p> <p>The National Earthquake Information Center earthquake report for the 27 February 2022 event is found on<br> <a href="https://earthquake.usgs.gov/earthquakes/eventpage/us6000h0k8/executive">https://earthquake.usgs.gov/earthquakes/eventpage/us6000h0k8/executive</a><br> (last accessed April 2022).</p> <p>References<br> ----------</p> <p>Fisk, M. D. (2002). Accurate Locations of Nuclear Explosions at the Lop Nor Test Site Using Alignment of Seismograms and IKONOS Satellite Imagery. Bull. Seismol. Soc. Am. 92, 29112925. doi:<a href="http://dx.doi.org/10.1785/0120010268">10.1785/0120010268</a>.</p> <p>International Seismological Centre (2022), On-line Bulletin, <a href="https://doi.org/10.31905/D808B830">https://doi.org/10.31905/D808B830</a></p>
IODP Expedition 372A RGB channels (calculated from core photos)
<p>Red, green, and blue pixel data were extracted from Section Half Imaging Logger (SHIL) linescan images, typically binned at 0.5 cm resolution using the central 2 cm of the image.</p>
IODP Expedition 374 RGB channels (calculated from core photos)
<p>Red, green, and blue pixel data were extracted from Section Half Imaging Logger (SHIL) linescan images, typically binned at 0.5 cm resolution using the central 2 cm of the image.</p>
REFLOW Products from Hydrothermal Carbonization of Dairy Waste- Yield Calculations
<p>Dataset involving yield calculations for the hydrochar produced from the hydrothermal carbonization of dairy waste to produce STRUBIAS material. Calculations are performed based on the collected data from the laboratory experiments performed in the University of Limerick.</p>
Gravity waves in Titan's atmosphere: A comparison between linearized wave model calculations and HASI observations
<p>The data for the article "Gravity waves in Titan's atmosphere: A comparison between linearized wave model calculations and HASI observations" (GWTA). </p> <p> </p> <ol> <li>"Titan_CJP_std_chem.dat" is the background atmosphere data of Titan's atmosphere from Strobel's model. It is used in Figure 1 of the article.</li> <li>"HASI_T_p_rho_vsZ_2008.dat" is the data for Cassini-Huygens observations in Titan's atmosphere. It is used in Figure 1 of the article.</li> <li>"Mma-Program-for-GW-on-Titan.txt" is the main Mathematica program to simulate the gravity waves on Titan.</li> <li>"solutions-fun.rar" is the simulation result. This RAR file includes 174 gravity wave samples simulated with different periods and horizontal wavelengths (can be read from the subfile names after uncompressing). These gravity wave solutions are stored as InterpolatingFunction of Mathematica. The solution describes the gravity wave temperature, velocity, and density perturbations profiles from altitude 300km to 2000km. However, they are plain texts and can easily be read by any software. Figures from 2-10 are based on these data.</li> </ol> <p> </p>
Phonon calculations and measurements dataset for use with the Euphonic program
<p>A dataset of ab initio phonon calculation input and output files for the CASTEP, VASP and PHONOPY codes, together with inelastic neutron scattering measurements from the MERLIN and MARI spectrometers at the ISIS Neutron and Muon Source.</p> <p>The dataset comprises data on five materials (Aluminium, La2Zr2O7, Niobium, Quartz and Silicon) as shown in the publication "<em>Euphonic</em>: inelastic neutron scattering simulations from force constants and visualisation tools for phonon properties" by R. Fair et al., and is organised into folders for each material. There are also accompanying python and matlab scripts for handling the datafiles.</p> <p>The main zip file, <code> euphonic_data.zip</code>, contains DFT output files (*.castep_bin, and phonopy.yaml) which can be used with the Euphonic python program ( https://euphonic.readthedocs.io/ ) which has been developed to efficiently calculate phonon bandstructures and inelastic neutron spectra. It also contains INS measured powder datafiles for Aluminium and Silicon and scripts using the Mantid program to read and plot these data. Scripts for handling the measured single-crystal INS data on Quartz and the small subset of the data shown in the publication are included in <code>euphonic_data.zip</code> but the full datafiles are in a separate archive, <code>quartz_raw_data.zip</code>.</p>
Conformation and structural features of diuron and irgarol: insights from quantum chemistry calculations.
<p>A set of conformational relevant structures of Diuron and Irgarol (two biocides) obtained from conformational analyses carried out using Density Functional Theory (DFT). The geometries are given in the mol2 format.</p>
(DATASET) Functionalized boron–nitride nanotubes: First-principles calculations.
<p>Boron nitride nanotubes (BNNTs), a type of nanomaterial that was first made in 1995, have gained attention in the last two and a half decades, having been characterized as promising inorganic nanoparticles for the application and development of devices in nanomedicine (such as drug delivery systems), and chemical sensors, among other applications. With the use of density functional theory (DFT) calculations, we study the effect of functionalizing the surface of a BNNT with hydroxyl (-OH) and carboxyl (-COOH) organic groups at the N and B sites. The results indicate that the -OH radical remains adsorbed in the B site whereas it is detached from the surface when added to the N site. Very differently, the -COOH remains attached for both adsorption sites. Both functionalizations induced a magnetic moment, produced spin-polarized electronic bands, created flat impurity-like bands, decreased the band gaps, and modified the electron density of the nanotubes. All these changes can be used to control and modify the interaction of BNNTs with other molecules of interest like drugs, heavy metals, and greenhouse gasses, among other substances.</p>
IODP Expedition 352 RGB channels (calculated from core photos)
<p>Red, green, and blue pixel data were extracted from Section Half Imaging Logger (SHIL) linescan images, typically binned at 0.5 cm resolution using the central 2 cm of the image.</p>
Fully Calculated Samples for Discrete Manufacturing Simulation Environment
<p>This dataset is a MySQL file and contains fully calculated samples for different baseline situations:</p> <p><br> </p> <table> <thead> <tr> <th>Env-Version</th> <th>ammountOfCarriers</th> <th>uncertainty</th> <th>onlyForTraining</th> <th>quantity</th> </tr> </thead> <tbody> <tr> <td>1</td> <td>4</td> <td>1</td> <td>0</td> <td>10000</td> </tr> <tr> <td>1</td> <td>4</td> <td>1</td> <td>1</td> <td>90786</td> </tr> <tr> <td>1</td> <td>4</td> <td>3</td> <td>0</td> <td>10000</td> </tr> <tr> <td>1</td> <td>4</td> <td>3</td> <td>1</td> <td>92254</td> </tr> <tr> <td>1</td> <td>6</td> <td>1</td> <td>0</td> <td>20000</td> </tr> <tr> <td>1</td> <td>6</td> <td>1</td> <td>1</td> <td>210000</td> </tr> <tr> <td>1</td> <td>6</td> <td>3</td> <td>0</td> <td>20000</td> </tr> <tr> <td>1</td> <td>6</td> <td>3</td> <td>1</td> <td>214000</td> </tr> <tr> <td>1</td> <td>7</td> <td>3</td> <td>1</td> <td>30000</td> </tr> <tr> <td>1</td> <td>8</td> <td>3</td> <td>1</td> <td>34188</td> </tr> <tr> <td>1</td> <td>9</td> <td>3</td> <td>1</td> <td>30000</td> </tr> <tr> <td>1</td> <td>10</td> <td>3</td> <td>1</td> <td>34000</td> </tr> <tr> <td>1</td> <td>12</td> <td>3</td> <td>1</td> <td>3272</td> </tr> <tr> <td>2</td> <td>4</td> <td>1</td> <td>0</td> <td>10000</td> </tr> <tr> <td>2</td> <td>4</td> <td>1</td> <td>1</td> <td>94791</td> </tr> <tr> <td>2</td> <td>4</td> <td>3</td> <td>0</td> <td>10000</td> </tr> <tr> <td>2</td> <td>4</td> <td>3</td> <td>1</td> <td>100000</td> </tr> <tr> <td>2</td> <td>6</td> <td>1</td> <td>0</td> <td>10000</td> </tr> <tr> <td>2</td> <td>6</td> <td>1</td> <td>1</td> <td>90423</td> </tr> <tr> <td>2</td> <td>6</td> <td>3</td> <td>0</td> <td>10000</td> </tr> <tr> <td>2</td> <td>6</td> <td>3</td> <td>1</td> <td>249154</td> </tr> </tbody> </table> <p> </p> <p>How do you use the files?<br> You need a MySQL instance on your computer (e.g. via XAMPP). If you do not already have one, create a database there with the name: "rlskipping". The command for this is: </p> <blockquote> <p>CREATE DATABASE IF NOT EXISTS rlskipping;</p> </blockquote> <p>On Windows:</p> <p> 1) Open a new CMD-Shell.<br> 2) Navigate to the path where the sql file is located.<br> (e.g.: cd C:\Users\MrScience\Desktop\Work\myProject\Paper\SQL)<br> 3) Import the Files.<br> (e.g.: mysql -u root -p rlskipping < evaluierung.sql)<br> (e.g.: mysql -u root -p rlskipping < calculatedsamples.sql)</p>
IODP Expedition 351 RGB channels (calculated from core photos)
<p>Red, green, and blue pixel data were extracted from Section Half Imaging Logger (SHIL) linescan images, typically binned at 0.5 cm resolution using the central 2 cm of the image.</p>
Iron Nitride Nanoparticles for Rapid Dechlorination of Mixed Chlorinated Ethene Contamination: DFT Calculations
<p>This dataset contains input and output files of density functional theory calculations on which the computational part of the peer-reviewed article "Iron nitride nanoparticles for rapid dechlorination of mixed chlorinated ethene contamination" by M. Brumovský et al., doi 10.1016/j.jhazmat.2022.129988, is based. Please cite this article when using the dataset.</p> <p>The dataset includes:<br> * Structures and energies of adsorbed cis-DCE and PCE molecules on the Fe(110), Fe4N(001), and FeS(001) surfaces in the folder "Adsorption_calculations", including structures and energies of adsorbed TCE on the FeS(001) surface<br> * cis-DCE and PCE homolytic bond dissociation energies calculated using VASP and TURBOMOLE in the folder "BDE_calculations"<br> * Relaxed structures of dechlorinated intermediates on the Fe(110), Fe4N(001), and FeS(001) surfaces in the folder "Intermediates"<br> * Transition state calculations of chloroethene dechlorination reactions, including frequency calculations of transitions states, in the folder "NEB_calculations"<br> * Energies of reactants, products, and transitions states calculated with the inclusion of the solvent effect in the folder "VASPsol_calculations"</p> <p>The final geometries and energies calculated using VASP are reported in the CONTCAR and OUTCAR files, respectively. Note that the POTCAR files are not allowed to be made publicly accessible. However, their description is given in the OUTCAR files. Please consult VASP/TURBOMOLE manual for more information regarding input and output files.</p> <p>The fully relaxed unit cells of Fe, Fe4N, and FeS, as well as adsorption calculations of TCE, and transition state calculations of TCE chemisorption and its first dechlorination step on the Fe4N(001) surface are accessible in a previously published dataset, doi 10.5281/zenodo.6338412.</p> <p>Funding: This work was supported by the Austrian Science Fund (FWF) project M 2892-N. The Vienna Scientific Cluster (Project No. 70544) is gratefully acknowledged for providing computational resources.</p> <p>Terms of use: These data are provided "as is", without any warranty. The data are provided under the Creative Commons Attribution 4.0 International license.</p>
Thermodynamic database and calculator of free energies and potentials for redox reactions involving iron minerals in aqueous media (IMTD)
<p>Database of free energies of formation for iron minerals and associated aqueous species, which are used in a tableu style spreadsheet to calculate free energies of redox reactions involving iron minerals, which in turn are used to calculate free energies and formal potentials for these reactions, under specified environmental conditions.</p> <p>The database and calculators were assembled by students and postdocs (Jeff Hudson, Ania Pavitt, Ying Lan, and Miranda Bradley) working under direction of Professor Paul G. Tratnyek at the Oregon Health & Science University, Portland, Oregon, USA. Drew Latta, Thomas Robinson, and Michelle Scherer contributed to the database and extended the calculations.</p> <p>Early versions of this tool were used in several publications, including (i) Fan, D., Y. Lan, P. G. Tratnyek, R. L. Johnson, J. Filip, D. M. O'Carroll, A. N. Garcia, and A. Agrawal. 2017. <em>Environ. Sci. Technol.</em> 51(22): 13070–13085. [DOI: 10.1021/acs.est.7b04177] and (ii) Bradley, M. J., and P. G. Tratnyek. 2019. <em>ACS Earth & Space Chemistry</em> 3(3): 688-699. [DOI: 10.1021/acsearthspacechem.8b00200].</p> <p>This tool is provided as a spreadsheet in .xlsx format. The file includes six sheets. The first contains background, constants, and calculations that apply throughout the remaining tabs. The second contains free energies of formation from various authoritative sources, and a mechanism for designating “recommend values”. The third contains a tableu that calculates free energies of redox reactions using the recommended free energy of formation and user-specified stoichiometries. The fourth calculates free energies and formal potentials of the redox reactions using the standard potentials, and specific solution conditions. The last tab summarizes previous published formal potentials from a variety of sources. </p> <p>While the database was checked thoroughly, it still is unlikely to be completely accurate. For critical applications, we recommend that you track-down the primary sources (listed on the first tab of the spreadsheet) and use them for data, conditions, and other caveats. Obviously, we do not accept any responsibility for what anyone does with information obtained from this document.</p> <p>In the future, if significantly corrections or additions are made to this document, we may publish it here as new versions. If the contributions of others result in major improvements, we are open to adding new authors to those versions. Feel free to contact us with corrections, suggests, or offers to help.</p> <p>The development of this version of the tool was funded through grants from the Strategic Environmental Research and Development Program (SERDP) and the U.S. Department of Energy.</p>
Quantum calculation results for "Butyl Acetate Pyrolysis and Combustion Chemistry: Mechanism Generation and Shock Tube Experiments"
<p>This repository contains the quantum calculation results associated with the paper "Butyl Acetate Pyrolysis and Combustion Chemistry: Mechanism Generation and Shock Tube Experiments" by Xiaorui Dong, Gianmaria Pio, Farhan Arafin, Andrew Laich, Jessica Baker, Erik Ninnemann, Subith S. Vasu, and William H. Green.</p> <p>In the BA_QM.zip, there are five subfolders:</p> <ul> <li>The "BA_Habs" folder has 18 entries related to the calculations of butyl acetate H abstraction reactions</li> <li>The "BA_Retroene" folder has 6 entries related to the calculations of butyl acetate retro-ene reactions</li> <li>The "Species" folder has 606 entries related to the calculations of non-TS species included in the kinetic mechanisms.</li> <li>The "TS_XYZ" and "XYZ" folders contain the XYZ files of the calculated TS and non-TS geometries, respectively.</li> </ul> <p>For each species and TS calculation, the CBS-QB3 optimization/single point energy calculation is stored in the "composite" folder, the frequency calculation is stored in the 'freq' folder, and scan jobs for torsional modes (if available) are stored in the 'scan_XXXX' folders. For reaction and TS entries, folders are named in a user-readable way. For species, folders are named according to their SMILES representation.</p>
Quasi-two-dimensional ferromagnetism in the triangular magnet EuAl12O19: Monte Carlo Calculations
<p>This repository contains all classical Monte Carlo calculations relevant for EuAl12O19 material. All calculations were conducted using the UppASD code.</p> <p>Contents:</p> <ul> <li>in the root directory - all plots published in the Calculations section of the paper, together with underlying data</li> <li><code>ab_plane_nodip</code> - a directory containing calculations for <em>M || H || [100]</em> and <em>M || H || [210]</em>, showing that the orientation of spins within the ab-plane does not have an effect on the magnetization curves. Calculated without dipolar interaction</li> <li><code>dm_effect</code> - a directory containing magnetization curve calculations for a) no Dzyaloshinskii-Moriya interaction (<code>dm_effect/0</code>), b) strong Dzyaloshinskii-Moriya interaction of <em>D = J/2</em> (<code>dm_effect/0.00125</code>)</li> <li><code>fit_nodip</code> - a directory with calculations related to J (exchange interaction energy), K (single-ion anisotropy energy) fitting -- <strong>without</strong> dipolar interaction</li> <li><code>fit_dip</code> - a directory with calculations related to J, K fitting -- <strong>with</strong> dipolar interaction, <strong>source of data for plots in the paper</strong></li> </ul> <p><strong>Note</strong>: all directories were archived to .tar.gz files to comply with the file number limit.</p> <h3>MvsB curves</h3> <p>Each directory contains a set of magnetization calculations for various parameters and follows the same strict directory structure: UppASD calculations necessary for the MvsB magnetization curves are found in subdirectory <code>Hsweep/$J/$K/$axis/$T/$H</code> where:</p> <ul> <li><code>$J</code> is the value of exchange interaction energy (in mRy)</li> <li><code>$K</code> is the value of single-ion anisotropy energy (in mRy)</li> <li><code>$axis</code> is the direction of both the external field and the magnetization measurement (either <code>100</code>, <code>210</code> or <code>001</code>)</li> <li><code>$T</code> is the temperature (in Kelvins)</li> <li><code>$H</code> is the strength of the external field (in Teslas)</li> </ul> <p>Each UppASD calculation contains a set of input files (<code>inpsd.dat</code>, <code>posfile</code>, <code>momfile</code>, <code>jfile</code>, <code>kfile</code>) and output files (<code>*.out</code>).</p> <p>Furthermore, files <code>Hsweep/$J/$K/$axis/$T/MvsB.dat</code> contain the data for specific MvsB magnetization curve. Files <code>Hsweep/$J/$K/MvsB-[$axis].png</code> contain plots of MvsB magnetization curves for a specific axis and all available temperatures.</p> <h3>MvsT curves</h3> <p>A similar directory structure exists for calculations necessary for the MvsT curves - <code>Tsweep/$J/$K/$axis/$T</code> where the parameters have the same meaning as in the Hsweep directory.</p> <p>Files <code>Tsweep/$J/$K/$axis/MvsT.dat</code> contain the data for a specific MvsT magnetization curve. Files <code>Tsweep/$J/$K/MvsT.png</code> contain plots of MvsT curves for all available axes.</p> <p><strong>H = 0.1 T for all MvsT measurements</strong>.</p>
OPTIMADE compliant results database + Detailed input/outputs of VASP calculations as BSON mongodump and JSON formats
<p>This dataset that contains the results presented in the journal article entitled "SurfFlow: High-throughput surface energy calculations for arbitrary crystals" that was published in Volume 234 of the Elsevier journal Computational Materials Science.</p> <p>The dataset consists of a dump of a MongoDB database with two collections; an OPTIMADE compliant results collection, and a supplementary collection that contains detailed data on the VASP calculations performed. Each entry in the OPTIMADE-compliant results collection contains an id, and every VASP calculation that was involved in the calculation of surface energies of that entry can be found by filtering for the same id matching the "optimade_id" in the VASP data collection.</p> <p>The data is served in two different formats; a BSON mongodump folder that can be restored to a MongoDB instance using the mongorestore tool, and additionally as simple .json files. The contents are identical and the users are encouraged to choose the format that is convenient to them.</p> <p>Here's a simple tree-view of the uncompressed attachment:</p> <p>./surfflow-bson/surfflow:<br>2.2M optimade.bson.gz<br> 153 optimade.metadata.json.gz<br> 40M vasp_data.bson.gz<br> 154 vasp_data.metadata.json.gz</p> <p>./surfflow-json:<br> 27M optimade.json<br>346M vasp_data.json</p>
Infrared Radiative Transfer Calculations Dataset
<p>This dataset presents the results of a series of experiments conducted varying combinations of two versions of the HITRAN database (2016 and 2020) and two versions of the MT_CKD water vapor continuum model (3.2 and 4.1.1). Five atmospheric models representing different climatic conditions (Tropical, Mid Latitude Winter, Mid Latitude Summer, Sub Arctic Winter, and Sub Arctic Summer) are employed. Key atmospheric gases, including CO2, O3, CH4, CO, N2O, and O2, are prescribed at each atmospheric model. The dataset includes calculations with all gases present as well as experiments removing individual gases (specifically CO2, O3, and water vapor). Outputs consist of upwelling and downwelling infrared radiation and cooling rate profiles at 44 atmospheric heights from the surface to 95 km. Data are provided at 0.1 cm^-1 resolution across the spectral range from 10 to 3000 cm^-1. For each experiment, a file in “.txt” format is available at each atmospheric height containing the flux each wavenumber. This dataset offers valuable insights into the impact of different atmospheric compositions and models on radiative transfer processes and cooling rates, contributing to a better understanding of Earth's climate system.</p> <p>Similar experiments are compacted in .tar files:</p> <p>var_profile_HITRAN<em>_lev_</em>lllll_mtckd{<em>_wo</em>flag}<em>.tar</em></p> <table> <tbody> <tr> <td>var (3 digits)</td> <td>profile (3 digits)</td> <td>HITRAN (4 digits)</td> <td>lllll (5 digits)</td> <td>mtckd (3 digits)</td> <td>flag (3 digits)</td> </tr> <tr> <td>"olr": upward radiation flux</td> <td>"tro": Tropical</td> <td>2016</td> <td>Output height in meters. 5 digits. Ranging from the surface (i.e. "00000") to 95 km (i.e. "95000")</td> <td>"3.2": v3.2</td> <td>"H2O": experiment removing water vapor.</td> </tr> <tr> <td>"dlr": downward radiation flux</td> <td>"mls": Mid Latitude Summer</td> <td>2020</td> <td> </td> <td>"4.1": v4.1.1</td> <td>"CO2": experiment removing carbon dioxide.</td> </tr> <tr> <td>"coo": cooling rates</td> <td>"mlw": Mid Latitude Winter</td> <td> </td> <td> </td> <td> </td> <td>"O3": experiment removing ozone.</td> </tr> <tr> <td> </td> <td>"sas": Sub Artic Summer</td> <td> </td> <td> </td> <td> </td> <td>"BFX": experiment without the "B linear to tau" aproximation.</td> </tr> <tr> <td> </td> <td>"saw": Sub Artic Winter</td> <td> </td> <td> </td> <td> </td> <td> </td> </tr> </tbody> </table> <p>To untar the file:</p> <pre><code>tar -xzf var_profile_HITRAN_lev_lllll_mtckd_woflag.tar</code></pre> <p>Each tar file consists of 880 text files.</p>
Spring-Summer cumulated water presence of "Marais Breton nord" calculated with the WIW
<p>The WIW was calculated for all SENTINEL 2 cloudless images available within the period from May to September from 2017 to 2022. All WIW rasters were then added to provide the cumulated water presence ranging from 1 to 39 corresponding to the number of dates related to available cloudless images at that period in the Marais Breton Nord. The table provides the dates of the images used. EPSG 3857</p>
Winter cumulated water presence of "Loire-Atlantique et abord" calculated with the WIW
<p>4 rasters cover the "Loire-Atlantique et abord" study area. The WIW was calculated for all SENTINEL 2 cloudless images available within the period from January to April from 2017 to 2023. All WIW rasters were then added to provide the cumulated water presence ranging from 1 to 15 corresponding to the number of dates related to available cloudless images at that period. The table provides the dates of the images used. EPSG 3857.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.