Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
1,891
datasets available to search
ShareScore release 0.9.0
Dataset results
1,891 results for “Field data”
MMS 2 Electric Double Probe (EDP) Three-Dimensional Electric Field, Level 2 (L2), Burst Mode, 0.1220703125 ms Data
Electric Double Probe, Three-Dimensional Electric Field, Level 2, Burst Mode Data
MMS 2 Electric Double Probe (EDP) Three-Dimensional Electric Field, Level 2 (L2), Slow Mode, 0.125 s Data
Electric Double Probe, Quick-Look Three-Dimensional Electric Field, Level 2, Slow Survey Data
MMS 2 Electric Double Probe (EDP) Three-Dimensional Electric Field, Level 2 (L2), Fast Mode, 31.25 ms Data
Electric Double Probe, Quick-Look Three-Dimensional Electric Field, Level 2, Fast Survey Data
data for Thermodynamics of correlated electrons in a magnetic field
<p>DQMC data and Jupyter/Python analysis scripts</p>
PSP FIELDS Digital Fields Board (DFB) AC-coupled Searchcoil Magnetometer, SCM, Bandpass filtered, Low Frequency, High Gain, u-component, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, SCMulfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC bandpass data consist of peak and average values of the absolute value of bandpassed time series waveform data over a time interval equal to the reporting cadence. The AC bandpass data have the peak response frequency of each bin reported in the metadata. The frequency response curves for these bins are given in [3].The Level 2 data products contained in this data file have been calibrated for:* 1) The ~6.3 dB loss associated with forming the bandpass signal, see reference [3]* 2) DFB in-band gain* 3) The search coil preamplifier response, when applicableCalibrations for the DFB digital filter gains and analog filter gains have not been implemented as it was determined that these could not be applied accurately to single numerical values representing a broadband signal response and because all bins except the highest frequency bin have a flat gain response equal to one due to these filters. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts. Likewise, all magnetic field quantities when present in these Level 2 data products are expressed by using units of nanoTelsas.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements and [u,v,w] for the searchcoil magnetometer.The time resolution of the DFB AC bandpass filtered data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC bandpass filtered data cadence is typically 1/8 of a NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
PSP FIELDS Digital Fields Board (DFB) AC-coupled Differential Voltage, V3-V4 Antennae, Dipole Mode, Bandpass filtered, High Gain, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, dV34 data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC bandpass data consist of peak and average values of the absolute value of bandpassed time series waveform data over a time interval equal to the reporting cadence. The AC bandpass data have the peak response frequency of each bin reported in the metadata. The frequency response curves for these bins are given in [3].The Level 2 data products contained in this data file have been calibrated for:* 1) The ~6.3 dB loss associated with forming the bandpass signal, see reference [3]* 2) DFB in-band gain* 3) The search coil preamplifier response, when applicableCalibrations for the DFB digital filter gains and analog filter gains have not been implemented as it was determined that these could not be applied accurately to single numerical values representing a broadband signal response and because all bins except the highest frequency bin have a flat gain response equal to one due to these filters. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts. Likewise, all magnetic field quantities when present in these Level 2 data products are expressed by using units of nanoTelsas.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements and [u,v,w] for the searchcoil magnetometer.The time resolution of the DFB AC bandpass filtered data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC bandpass filtered data cadence is typically 1/8 of a NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
PSP FIELDS Digital Fields Board (DFB) DC-coupled Searchcoil Magnetometer, SCM, Spectra, Low Frequency, High Gain, u-component, Sensor coordinates, Level 2 (L2), 6.99054 s Data
PSP FIELDS Digital Fields Board, DFB, SCMulfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB DC spectra data consist of power spectral densities as a function of frequency and time. These spectra are averaged over both frequency and time as described in [3]. The spectra have pseudo-logarithmically spaced frequency bins with the bin central frequencies reported in the metadata.The Level 2 data products contained in this data file have been calibrated for:* 1) The Hanning window used in the spectral calculation* 2) DFB in-band gain* 3) DFB analog filter gain response* 4) DFB digital filter gain response* 5) The search coil preamplifier response, when applicable* 6) The bandwidth of each spectral binNote that compensation for the DFB digital filters will introduce a non-physical positively sloped power trend at high frequencies when the non-corrected signal is dominated by noise. This effect should be examined carefully when determining spectral slopes and features at the highest frequencies. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts squared per Hertz. Likewise, all magnetic field quantities when present in these Level 2 data product are expressed by using units of nanoTesla squared per Hertz.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements. For solar orbits 1 and 2, the search coil magnetometer spectral data are rotated into a non-intuitive coordinate system with components [d,e,f]. For solar orbits 3 and beyond, the magnetic field spectral data are in expressed in search coil magnetometer sensor coordinates with components [u,v,w].To rotate from [d,e,f] coordinates into [u,v,w] search coil sensor coordinates, use the following matrix, written in IDL notation, and the following equation: spectra_uvw_vector = R ## spectra_def_vector.R = [[ 0.46834856, -0.81336422 , 0.34509170] [ -0.66921924, -0.071546954, 0.73961249] [ -0.57688408, -0.57733845 , -0.57782790]]The time resolution of the DFB DC spectral data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB DC spectra data cadence is typically 30 NYseconds NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
MMS 1 Electron Drift Instrument (EDI) Electric Field, Level 2 (L2), Survey Mode, 5 s Data
Electron Drift Instrument (EDI) Electric Field Survey, Level 2, 5 s Data. EDI has two scientific data acquisition modes, called electric field mode and ambient mode. In electric field mode, two coded electron beams are emitted such that they return to the detectors after one or more gyrations in the ambient magnetic and electric field. The firing directions and times-of-flight allow the derivation of the drift velocity and electric field. In ambient mode, the electron beams are not used. The detectors with their large geometric factors and their ability to adjust the field of view quickly allow continuous sampling of ambient electrons at a selected pitch angle and fixed but selectable energy. To find the beam directions that will hit the detector, EDI sweeps each beam in the plane perpendicular to B at a fixed angular rate of 0.22 °/ms until a signal has been acquired by the detector. Once signal has been acquired, the beams are swept back and forth to stay on target. Beam detection is not determined from the changes in the count-rates directly, but from the square of the beam counts divided by the background counts from ambient electrons, i.e., from the square of the instantaneous signal-to-noise ratio (SNR). This quantity is computed from data provided by the correlator in the Gun-Detector Electronics that also generates the coding pattern imposed on the outgoing beams. If the squared SNR ratio exceeds a threshold, this is taken as evidence that the beam is returning to the detector. The thresholds for SNR are chosen dependent on background fluxes. They represent a compromise between getting false hits (induced by strong variations in background electron fluxes) and missing true beam hits. The basic software loop that controls EDI operations is executed every 2 ms. As the times when the beams hit their detectors are neither synchronized with the telemetry nor equidistant, EDI data have no fixed time-resolution. Data are reported in telemetry slots. In Survey, using the standard packing mode 0, there are eight telemetry slots per second and Gyn Detector Unit (GDU). The last beam detected during the previous slot will be reported in the current slot. If no beam has been detected, the data quality will be set to zero. In Burst telemetry there are 128 slots per second and GDU. The data in each slot consists of information regarding the beam firing directions (stored in the form of analytic gun deflection voltages), times-of-flight (if successfully measured), quality indicators, time stamps of the beam hits, and some auxiliary correlator-related information. Whenever EDI is not in electron drift mode, it uses its ambient electron mode. The mode has the capability to sample at either 90 degrees pitch angle or at 0/180 degrees (field aligned), or to alternate between 90 degrees and field aligned with selectable dwell times. While all options have been demonstrated during the commissioning phase, only the field aligned mode has been used in the routine operations phase. The choices for energy are 250 eV, 500 eV, and 1 keV. The two detectors, which are facing opposite hemispheres, are looking strictly into opposite directions, so while one detector is looking along B the other is looking antiparallel to B (corresponding to pitch angles of 180 and 0 degrees, respectively). The two detectors switch roles every half spin of the spacecraft as the tip of the magnetic field vector spins outside the field of view of one detector and into the field of view of the other detector. This is the primary data product generated from data collected in electric field mode. The science data generated are drift velocity and electric field data in various coordinate systems. They are derived from triangulation and/or time-of-flight analysis. Where both methods are applicable, their results will be combined using a weighting approach based on their relative errors. The EDI instrument paper can be found at: http://link.springer.com/article/10.1007%2Fs11214-015-0182-7. The EDI instrument data products guide can be found at https://lasp.colorado.edu/mms/sdc/public/datasets/fields/.
PSP FIELDS Digital Fields Board (DFB) AC-coupled Searchcoil Magnetometer, SCM, Bandpass filtered, Medium Frequency, High Gain, u-component, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, SCMumfhg data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC bandpass data consist of peak and average values of the absolute value of bandpassed time series waveform data over a time interval equal to the reporting cadence. The AC bandpass data have the peak response frequency of each bin reported in the metadata. The frequency response curves for these bins are given in [3].The Level 2 data products contained in this data file have been calibrated for:* 1) The ~6.3 dB loss associated with forming the bandpass signal, see reference [3]* 2) DFB in-band gain* 3) The search coil preamplifier response, when applicableCalibrations for the DFB digital filter gains and analog filter gains have not been implemented as it was determined that these could not be applied accurately to single numerical values representing a broadband signal response and because all bins except the highest frequency bin have a flat gain response equal to one due to these filters. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts. Likewise, all magnetic field quantities when present in these Level 2 data products are expressed by using units of nanoTelsas.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements and [u,v,w] for the searchcoil magnetometer.The time resolution of the DFB AC bandpass filtered data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC bandpass filtered data cadence is typically 1/8 of a NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
PSP FIELDS Digital Fields Board (DFB) AC-coupled Differential Voltage, V1-V2 Antennae, Dipole Mode, Bandpass filtered, High Gain, Sensor coordinates, Level 2 (L2), 0.873813 s Data
PSP FIELDS Digital Fields Board, DFB, dV12 data:The DFB is the low frequency, less than 75 kHz, component of the FIELDS experiment on the Parker Solar Probe spacecraft, see reference [1] below. For a full description of the FIELDS experiment, see reference [2]. For a description of the DFB, see reference [3].DFB AC bandpass data consist of peak and average values of the absolute value of bandpassed time series waveform data over a time interval equal to the reporting cadence. The AC bandpass data have the peak response frequency of each bin reported in the metadata. The frequency response curves for these bins are given in [3].The Level 2 data products contained in this data file have been calibrated for:* 1) The ~6.3 dB loss associated with forming the bandpass signal, see reference [3]* 2) DFB in-band gain* 3) The search coil preamplifier response, when applicableCalibrations for the DFB digital filter gains and analog filter gains have not been implemented as it was determined that these could not be applied accurately to single numerical values representing a broadband signal response and because all bins except the highest frequency bin have a flat gain response equal to one due to these filters. Calibrations for the FIELDS preamplifiers have not been implemented as the preamplifier response is flat and equal to one through the DFB frequency range. Corrections for plasma sheath impedance gain and antenna effective length have not been applied to voltage sensor signals. These corrections will be applied in the Level 3 DFB data products. Therefore, all voltage sensor quantities when present in these Level 2 data products are expressed by using units of Volts. Likewise, all magnetic field quantities when present in these Level 2 data products are expressed by using units of nanoTelsas.The Level 2 data products contained in this data file are expressed in sensor coordinates: e.g. dV12, dV34 for voltage measurements and [u,v,w] for the searchcoil magnetometer.The time resolution of the DFB AC bandpass filtered data can vary by multiples of 2^N. During encounter when PSP is within 0.25 AU of the Sun, the DFB AC bandpass filtered data cadence is typically 1/8 of a NYsecond [2]. Timestamps correspond to the center time of each window.References:* 1) Fox, N.J., Velli, M.C., Bale, S.D. et al., Space Sci Rev (2016) 204:7. https://doi.org/10.1007/s1121401502116* 2) Bale, S.D., Goetz, K., Harvey, P.R. et al., Space Sci Rev (2016) 204:49. https://doi.org/10.1007/s1121401602445* 3) Malaspina, D.M., Ergun, R.E., Bolton, M. et al., JGR Space Physics (2016), 121, 5088-5096. https://doi.org/10.1002/2016JA022344
SWOT Post-launch Field Campaign Data from L3 Mooring
The SWOT Postlaunch Oceanography Field Campaign L3 Moorings collection provides the surface air pressure, GPS, current velocity, and conductivity, temperature and depth (CTD) measurements from moorings at the L3 processing level. The SWOT satellite mission launched in late 2022 and underwent a calibration and validation (cal/val) phase in 2023. As part of cal/val, an array of oceanographic instruments was deployed at a site 300 km offshore of California, including moorings at 11 distinct sites. The S2 mooring site had additional re-deployments from an otherwise independent project to study internal waves, the National Oceanographic Partnership Program – Global Internal Waves (NOPP-GIW), beyond the cal/val phase from September 2023 to October 2024. Data from NOPP-GIW are included in this collection, and described here, because they are closely related to the SWOT cal/val efforts. <br><br>L3 data are gridded data on a consistent depth-time grid, whereby “depth” is given as pressure. Multiple versions, or layouts, of L3 data are disseminated for slightly different use cases as described in the user guide. L3 data are meant as the primary end-user datasets, and users should determine which version is most suitable for them. A user should consider what time resolution is needed, whether constantly spaced time steps are needed, and if data from more than one mooring at a time are needed.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.