Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
2,170
datasets available to search
ShareScore release 0.9.0
Dataset results
2,170 results for “clouds”
SEAC4RS ER-2 Aircraft In-Situ Cloud Data
SEAC4RS_Cloud_AircraftInSitu_ER2_Data are in-situ trace gas data collected onboard the ER-2 aircraft during the Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEA4CRS) airborne field study. Data collection for this product is complete.Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS) airborne field study was conducted in August and September of 2013. The field operation was based in Houston, Texas. The primary SEAC4RS science objectives are: to determine how pollutant emissions are redistributed via deep convection throughout the troposphere; to determine the evolution of gases and aerosols in deep convective outflow and the implications for UT/LS chemistry; to identify the influences and feedbacks of aerosol particles from anthropogenic pollution and biomass burning on meteorology and climate through changes in the atmospheric heat budget (i.e., semi-direct effect) or through microphysical changes in clouds (i.e., indirect effects); and lastly, to serve as a calibration and validation test bed for future satellite instruments and missions.The airborne observational data were collected from three aircraft platforms: the NASA DC-8, ER-2, and SPEC LearJet. Both the NASA DC-8 and ER-2 aircraft were instrumented for comprehensive in-situ and remote sensing measurements of the trace gas, aerosol properties, and cloud properties. In addition, radiative fluxes and meteorological parameters were also recorded. The NASA DC-8 was mostly responsible for tropospheric sampling, while the NASA ER-2 was operating in the lower stratospheric regime. The SPEC LearJet was dedicated to in-situ cloud characterizations. To accomplish the science objectives, the flight plans were designed to investigate the influence of biomass burning and pollution, their temporal evolution, and ultimately, impacts on meteorological processes which can, in turn, feedback on regional air quality. With respect to meteorological feedbacks, the opportunity to examine the impact of polluting aerosols on cloud properties and dynamics was of particular interest.
Sentinel-5P TROPOMI SNPP VIIRS cloud product band 6 (NIR detector) 1-Orbit L2 7km x 3.5km V1 (S5P_L2__NP_BD6) at GES DISC
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented. For data after August 6th of 2019, please check S5P_L2__NP_BD6 data collection. The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions. Copernicus Sentinel-5P is flying in a loose formation with U.S. Suomi National Polar-orbiting Partnership (SNPP) so that S5P is able to utilize the high spatial resolution capability of the Visible Infrared Imager Radiometer Suite (VIIRS) instrument. S5P_L2_NP_BDx product contains VIIRS cloud information for each S5P across-track observation in a given band (i.e. band 3, band 6 and band 7). In addition to the nominal filed-of-view (FOV), the S5P_NPPC products are also generated for three scaled FOVs both in along and across-track directions to account for the presence of cloud covering a more extended area than the nominal FOV. The main output of S5P_L2_NP_BDx are the number of VIIRS pixels classified as confidently cloudy, probably cloudy, probably clear, and confidently clear; and the VIIRS sun-normalized radiance information in band M7, M9, and M11 such as mean, standard deviation, as well as number of valid radiance contributions.
NAAMES C-130 Aerosol and Cloud Remote Sensing Data, Version 1
NAAMES_AerosolCloud_AircraftRemoteSensing_Data are remotely sensed cloud, aerosol and ocean optical measurements collected onboard the C-130 aircraft during the North Atlantic Aerosols and Marine Ecosystems Study (NAAMES). NAAMES was a NASA funded Earth-Venture Suborbital (EVS) mission with 4 deployments occurring from 2015-2018.The NASA North Atlantic Aerosols and Marine Ecosystems Study (NAAMES) project was the first NASA Earth Venture – Suborbital mission focused on studying the coupled ocean ecosystem and atmosphere. NAAMES utilizes a combination of ship-based, airborne, autonomous sensor, and remote sensing measurements that directly link ocean ecosystem processes, emissions of ocean-generated aerosols and precursor gases, and subsequent atmospheric evolution and processing. Four deployments coincide with the seasonal cycle of phytoplankton in the North Atlantic Ocean: the Winter Transition (November 5 – December 2, 2015), the Bloom Climax (May 11 – June 5, 2016), the Deceleration Phase (August 30 – September 24, 2017), and the Acceleration Phase (March 20 – April 13, 2018). Ship-based measurements were conducted from the Woods Hole Oceanographic Institution Research Vessel Atlantis in the middle of the North Atlantic Ocean, while airborne measurements were conducted on a NASA Wallops Flight Facility C-130 Hercules that was based at St. John's International Airport, Newfoundland, Canada. Data products in the ASDC archive focus on the NAAMES atmospheric aerosol, cloud, and trace gas data from the ship and aircraft, as well as related satellite and model data subsets. While a few ocean-remote sensing data products (e.g., from the high-spectral resolution lidar) are also included in the ASDC archive, most ocean data products reside in a companion archive at SeaBass.
SWOT Level 2 Water Mask Pixel Cloud Data Product, Version 2.0
Point cloud of water mask pixels (“pixel cloud”) with geolocated heights, backscatter, geophysical fields, and flags. Point cloud over tile (approx 64x64 km2); half swath (left or right side of full swath). Available in netCDF-4 file format.
MODIS/Aqua Clouds 1km and 5km 5-Min L2 Wide Swath Subset along CloudSat V002 (MAC06S1) at GES DISC
This is the wide-swath MODIS/Aqua subset along CloudSat field of view track. The goal of the wide-swath subset is to select and return MODIS data that are within +-100 km across the CloudSat track. I.e. the resultant MODIS subset swath is sought to be about 200 km cross-track. However, the original MYD06_L2 has data of 5- and 1-km pixels. Thus, MAC06S1 cross-track width is 41- and 201-pixels, depending on the parameter.Along-track, all MODIS pixels from the original product are preserved. In the standard product, the level-2 MODIS cloud product consists of cloud optical and physical parameters. These parameters are derived using remotely sensed infrared, visible and near infrared solar reflected radiances. MODIS infrared channel radiances are used to derive cloud top temperature, cloud top height, effective emissivity, cloud phase (ice vs. water, opaque vs. non-opaque), and cloud fraction under both daytime and nighttime conditions. MODIS visible radiances are used to derive cloud optical thickness and effective particle radius and cloud shadow effects. Near infrared solar reflected radiance provides additional information in the retrieval of cloud particle phase (ice vs. water, clouds vs. snow). (The shortname for this product is MAC06S1).
Cloud Physics LiDAR (CPL) IMPACTS
The Cloud Physics LiDAR (CPL) IMPACTS dataset consists of backscatter coefficient, lidar depolarization ratio, layer top/base height, layer type, particulate extinction coefficient, ice water content, and layer/cumulative optical depth data collected from the Cloud Physics LiDAR (CPL) onboard the NASA ER-2 high-altitude research aircraft in support of the Investigation of Microphysics and Precipitation for Atlantic Coast-Threatening Snowstorms (IMPACTS) field campaign. IMPACTS was a three-year sequence of winter season deployments conducted to study snowstorms over the U.S. Atlantic Coast (2020-2023). The campaign aimed to (1) Provide observations critical to understanding the mechanisms of snowband formation, organization, and evolution; (2) Examine how the microphysical characteristics and likely growth mechanisms of snow particles vary across snowbands; and (3) Improve snowfall remote sensing interpretation and modeling to significantly advance prediction capabilities. The dataset files are available in HDF-5 format from January 15, 2020, through March 2, 2023.
VIIRS/NOAA-20 Cloud Mask L2 6-Min Swath 750m (NRT)
The NOAA-20 Visible Infrared Imaging Radiometer Suite (VIIRS) NASA Level-2 (L2) Cloud Mask is one of two continuity products designed to sustain the long-term records of both Moderate Resolution Imaging Spectroradiometer (MODIS) and VIIRS heritages. CLDMSK_L2_VIIRS_NOAA20_NRT is the shortname for the NOAA-20 VIIRS Near Real-time incarnation of the Cloud Mask continuity product derived from the MODIS-VIIRS cloud mask (MVCM) algorithm, which itself is based on the MODIS (MOD35) algorithm. MVCM describes a continuity algorithm that is central to both MODIS data (from Terra and Aqua missions) and VIIRS data (from SNPP and Joint Polar Satellite System missions). Please bear in mind that the term MVCM does not appear as an attribute within the product’s metadata. Implemented to consistently handle MODIS and VIIRS inputs, the NOAA-20 VIIRS collection-1 products use calibration-adjusted NASA VIIRS L1B as inputs. The nominal spatial resolution of the NOAA-20 VIIRS L2 Cloud mask is 750 meters.
MISR Level 3 Cloud Fraction by Altitude Product covering a month V001
MIL3MCFA_1 is the Multi-angle Imaging SpectroRadiometer (MISR) Level 3 Cloud Fraction by Altitude Product covering a month version 1. It provides the frequency of cloud occurrence partitioned into different cloud top height bins at a global and monthly scale with a latitude/longitude resolution of 0.5 degrees by 0.5 degrees and a vertical resolution of 500m. For each height bin, the frequency of a region's cloud occurrence over time is represented by the temporal mean of the spatial coverage of cloud tops. The spatial coverage of clouds is called cloud fraction, which is defined as the ratio of the number of cloudy pixels to the total number of cloudy and cloud-free pixels observed by the instrument. Clouds are assigned to height bins based on their top height, as the MISR stereoscopic technique retrieved. Data collection for this product is complete.The MISR instrument consists of nine push-broom cameras that measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four forward, and four aftward. It takes seven minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally Gaussian, centered at 443, 555, 670, and 865 nm.MISR is designed to view Earth with cameras pointed in 9 different directions. As the instrument flies overhead, each piece of Earth's surface below is successively imaged by all nine cameras in 4 wavelengths (blue, green, red, and near-infrared). The goal of MISR is to improve our understanding of the effects of sunlight on Earth and distinguish different types of clouds, particles, and surfaces. Specifically, MISR monitors the monthly, seasonal, and long-term trends in three areas: 1) amount and type of atmospheric particles (aerosols), including those formed by natural sources and by human activities; 2) amounts, types, and heights of clouds, and 3) distribution of land surface cover, including vegetation canopy structure.
Sulfates, Clouds and Radiation Brazil (SCAR-B) AERONET (AErosol RObotic NETwork) Data
SCAR_B_AERONET data are Smoke, Clouds and Radiation Brazil (SCARB) Aerosol Robotic Network (AERONET) data for aerosol characterization.Smoke/Sulfates, Clouds and Radiation - Brazil (SCAR-B) data include physical and chemical components of the Earth's surface, the atmosphere and the radiation field collected in Brazil with an emphasis in biomass burning.The objectives for the SCAR mission are: to advance our knowledge of how the physical, chemical and radiative processes in our atmosphere are affected by sulfate aerosol and smoke from biomass burning; to improve our expertise at remotely sensing smoke, water vapor, clouds, vegetation and fires; and to assess the effects of deforestation and biomass burning on tropical landscapes.AERONET (AErosol RObotic NETwork) is an optical ground based aerosol monitoring network and data archive supported by NASA's Earth Observing System and expanded by federation with many non-NASA institutions. The network hardware consists of identical automatic sun-sky scanning spectral radiometers owned by national agencies and universities. Data from this collaboration provides globally distributed near real time observations of aerosol spectral optical depths, aerosol size distributions, and precipitable water in diverse aerosol regimes. The data undergo preliminary processing (real time data), reprocessing (final calibration ~6 mo. after data collection), quality assurance, archiving and distribution from NASA's Goddard Space Flight Center master archive and several identical data bases maintained globally. The data provide algorithm validation of satellite aerosol retrievals and as well as characterization of aerosol properties that are unavailable from satellite sensors.
MISR Level 3 Global Cloud public Product in netCDF format covering a quarter V002
This file contains the MISR Level 3 Global Cloud public Product in netCDF format covering a quarter (seasonal).MI3QCLDN_002 is the Multi-angle Imaging SpectroRadiometer (MISR) Level 3 Global Cloud public Product in netCDF format covering a quarter version 2 data product. It is a global summary of the Level 1 and Level 2 cloud parameters of interest averaged over a quarter (seasonal) and reported on a geographic grid; it has multiple data layers with varying temporal resolutions of 0.5 degrees by 0.5 degrees and 2.5 degrees by 2.5 degrees resolution. The seasons are winter (December from the previous year, January and February), spring (March, April, and May), summer (June, July, and August), and fall (September, October, and November). Data collection for this product is ongoing.The MISR instrument consists of nine push-broom cameras that measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four forward, and four aftward. It takes seven minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally Gaussian, centered at 443, 555, 670, and 865 nm.MISR is designed to view Earth with cameras pointed in 9 different directions. As the instrument flies overhead, each piece of Earth's surface below is successively imaged by all nine cameras in 4 wavelengths (blue, green, red, and near-infrared). The goal of MISR is to improve our understanding of the effects of sunlight on Earth and distinguish different types of clouds, particles, and surfaces. Specifically, MISR monitors the monthly, seasonal, and long-term trends in three areas: 1) amount and type of atmospheric particles (aerosols), including those formed by natural sources and by human activities; 2) amounts, types, and heights of clouds, and 3) distribution of land surface cover, including vegetation canopy structure.
MISR Level 3 FIRSTLOOK Component Global Cloud Product covering a month V002
This file contains the public MISR Level 3 FIRSTLOOK Component Global Cloud Product covering a month.MI3MCDF_002 is the Multi-angle Imaging SpectroRadiometer (MISR) Level 3 FIRSTLOOK Component Global Cloud Product covering a month version 2 data product. It is a global summary of the Level 1 and Level 2 cloud parameters of interest averaged over a month and reported on a geographic grid; it has multiple data layers with varying temporal resolutions of 0.5 degrees by 0.5 degrees and 2.5 degrees by 2.5 degrees resolution. Data collection for this product is ongoing. FIRSTLOOK processing uses the new time dependence of the Atmospheric and Surface Climatology (TASC) from the same month/previous year. The TASC data set now contains snow-ice and ocean surface wind speed values that are updated monthly. Therefore, these data sets cannot be generated until the end of the month. Products generated are distinguished by the presence of FIRSTLOOK in the file names. The MISR instrument consists of nine push-broom cameras that measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four forward, and four aftward. It takes seven minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally Gaussian, centered at 443, 555, 670, and 865 nm.MISR is designed to view Earth with cameras in 9 different directions. As the instrument flies overhead, each piece of Earth's surface below is successively imaged by all nine cameras in 4 wavelengths (blue, green, red, and near-infrared). The goal of MISR is to improve our understanding of the effects of sunlight on Earth and distinguish different types of clouds, particles, and surfaces. Specifically, MISR monitors the monthly, seasonal, and long-term trends in three areas: 1) amount and type of atmospheric particles (aerosols), including those formed by natural sources and by human activities; 2) amounts, types, and heights of clouds, and 3) distribution of land surface cover, including vegetation canopy structure.
MODIS/Aqua Cloud Properties Level 3 monthly, 1x1 degree grid
The Cloud Properties Level-3 gridded product is designed to facilitate continuity in cloud property statistics between the MODIS on the Aqua and Terra platforms and the common continuity products generated for the VIIRS (Visible Infrared Imaging Radiometer Suite) and the MODIS Aqua instruments. CLDPROP Level-3 statistical routines include scalar and histograms (1-D and 2-D) that are calculated identically to statistical datasets in the MODIS standard Level-3 product (MOD08 and MYD08 for MODIS Terra and Aqua, respectively). In addition, the same dataset names are used for all common datasets provided in both the continuity and standard Level-3 files.
MISR Level 3 Cloud Fraction by Altitude Product covering a year V001
MIL3YCFA_001 is the Multi-angle Imaging SpectroRadiometer (MISR) Level 3 Cloud Fraction by Altitude Product covering a year version 1. It provides the frequency of cloud occurrence partitioned into different cloud top height bins at a global and monthly scale. It has multiple data layers, with a latitude/longitude resolution of 0.5 degrees by 0.5 degrees and a vertical resolution of 500m. For each height bin, the frequency of cloud occurrence of a region over a time period is represented by the temporal mean of the spatial coverage of cloud tops. The spatial coverage of clouds is called cloud fraction, which is defined as the ratio of the number of cloudy pixels to the total number of cloudy and cloud-free pixels observed by the instrument. Clouds are assigned to height bins based on their top height, as the MISR stereoscopic technique retrieved. Data collection for this product is complete.The MISR instrument consists of nine push-broom cameras that measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four forward, and four aftward. It takes seven minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally Gaussian, centered at 443, 555, 670, and 865 nm.MISR is designed to view Earth with cameras pointed in 9 different directions. As the instrument flies overhead, each piece of Earth's surface below is successfully imaged by all nine cameras in 4 wavelengths (blue, green, red, and near-infrared). The goal of MISR is to improve our understanding of the effects of sunlight on Earth and distinguish different types of clouds, particles, and surfaces. Specifically, MISR monitors the monthly, seasonal, and long-term trends in three areas: 1) amount and type of atmospheric particles (aerosols), including those formed by natural sources and by human activities; 2) amounts, types, and heights of clouds, and 3) distribution of land surface cover, including vegetation canopy structure.
MODIS/Aqua Aerosol, Cloud and Water Vapor Subset 5-Min L2 Swath 5km and 10km
The MODIS/Aqua Aerosol, Cloud and Water Vapor Subset 5-Min L2 Swath 5km and 10km (MYDATML2) product contains a combination of key high interest science parameters. The ATML2 product provides a subset of datasets from the suite of atmosphere team products on both a 10 km scale (aerosols) and 5km scale (native 5 km cloud properties and a 5x5 pixel sample of the 1km cloud datasets). The ATML2 product employs the same 5x5 pixel sampling scheme for the 1km native resolution Level 2 products as is used in the MOD08 Level 3 global aggregated product, an approach that has been shown to retain statistical integrity for multi-day aggregations. The C6 significantly increases the number of datasets included in the ATML2 product, including the full suite of QA datasets. Since the ATML2 data granule file size is significantly smaller than the combined size of the individual L2 products, and because the 1 km pixel sampling is consistent with the L3 algorithm, the ATML2 product is a more practical means for the user community to develop research L3 algorithms for their own specific purposes.For more information, visit the MODIS Atmosphere website at: https://modis-atmos.gsfc.nasa.gov/products/joint-atm
First ISCCP Regional Experiment - Arctic Cloud Experiment Utrecht University Tower
The First ISCCP Regional Experiments (FIRE) have been designed to improve data products and cloud/radiation parameterizations used in general circulation models (GCMs). Specifically, the goals of FIRE are (1) to improve basic understanding of the interaction of physical processes in determining life cycles of cirrus and marine stratocumulus systems and the radiative properties of these clouds during their life cycles and (2) to investigate the interrelationships between the International Satellite Cloud Climatology Project (ISCCP) data, GCM parameterizations, and higher space and time resolution cloud data.
ORACLES Cloud Aircraft InSitu Data
ORACLES_Cloud_AircraftInSitu_Data are in situ cloud measurements collected onboard the P-3 Orion or ER-2 aircraft during the ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) campaign. These measurements were collected from August 19, 2016 – October 27, 2016, August 1, 2017 – September 4, 2017 and September 21, 2018 – October 27, 2018. ORACLES provides multi-year airborne observations over the complete vertical column of key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments on the planet. The P-3 Orion aircraft was utilized as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds and was supplemented by ER-2 remote sensing during the 2016 campaign. Data collection for this product is complete.Southern Africa produces almost one-third of the Earth’s biomass burning aerosol particles. The ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) experiment was a five year investigation with three intensive observation periods (August 19, 2016 – October 27, 2016; August 1, 2017 – September 4, 2017; September 21, 2018 – October 27, 2018) and was designed to study key processes that determine the climate impacts of African biomass burning aerosols. ORACLES provided multi-year airborne observations over the complete vertical column of the key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments. These inter-model differences in aerosol and cloud distributions, as well as their combined climatic effects in the SE Atlantic are partly due to the persistence of aerosols above clouds. The varying separation of cloud and aerosol layers sampled during ORACLES allow for a process-oriented understanding of how variations in radiative heating profiles impact cloud properties, which is expected to improve model simulations for other remote regions experience long-range aerosol transport above clouds. ORACLES utilized two NASA aircraft, the P-3 and ER-2. The P-3 was used as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds in all three campaigns, supplemented by ER-2 remote sensing in 2016. ER-2 observations will be used to enhance satellite-based remote sensing by resolving variability within a particular scene, and by guiding the development of new and improved remote sensing techniques.
CAMEX-4 CVI CLOUD CONDENSED WATER CONTENT V1
The CAMEX-4 DC-8 Forward and NADIR Video dataset consists of DVDs which capture the forward and nadir views from the NASA DC-8 aircraft during CAMEX-4 flights. These videos contain timestamps and the recorded voice channels of the scientists and mission managers aboard the aircraft during flights studying storm conditions.
MISR radiometric camera-by-camera Cloud Mask subset for the UAE region V003
UAEMIRCM_003 is the Multi-angle Imaging SpectroRadiometer (MISR) radiometric camera-by-camera Cloud Mask subset for the UAE region version 3. It contains the Radiometric camera-by-camera Cloud Mask dataset. It is used to determine whether a scene is classified as clear or cloudy. The MISR instrument consists of nine push-broom cameras that measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four forward, and four aftward. It takes seven minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally Gaussian, centered at 443, 555, 670, and 865 nm.MISR is designed to view Earth with cameras in 9 different directions. As the instrument flies overhead, all nine cameras successfully imaged each piece of Earth's surface below in 4 wavelengths (blue, green, red, and near-infrared). MISR aims to improve our understanding of the effects of sunlight on Earth and distinguish different types of clouds, particles, and surfaces. Specifically, MISR monitors the monthly, seasonal, and long-term trends in three areas: 1) amount and type of atmospheric particles (aerosols), including those formed by natural sources and by human activities; 2) amounts, types, and heights of clouds, and 3) distribution of land surface cover, including vegetation canopy structure.
MISR Level 3 Cloud Motion Vector quarterly Product in netCDF format V002
MI3QCMVN_002 is the Multi-angle Imaging SpectroRadiometer (MISR) Level 3 Cloud Motion Vector quarterly Product in netCDF format version 2 data product. It contains retrievals of cloud motion determined by geometrically triangulating the position and motion of cloud features observed by MISR from multiple perspectives and times during the overpass of the Terra platform over each cloud scene. Estimates of cloud motion are a valuable proxy observation of the horizontal atmospheric wind field at the retrieved altitude of the cloud. The seasons are winter (December from the previous year, January, and February), spring (March, April, and May), summer (June, July, and August), and fall (September, October, and November). Data collection for this product is ongoing.MISR is designed to view Earth with cameras in 9 different directions. As the instrument flies overhead, all nine cameras successfully imaged each piece of Earth's surface below in 4 wavelengths (blue, green, red, and near-infrared). MISR aims to improve our understanding of the effects of sunlight on Earth and distinguish different types of clouds, particles, and surfaces. Specifically, MISR monitors the monthly, seasonal, and long-term trends in three areas: 1) amount and type of atmospheric particles (aerosols), including those formed by natural sources and by human activities; 2) amounts, types, and heights of clouds, and 3) distribution of land surface cover, including vegetation canopy structure.
MISR Level 3 Global Cloud public Product in netCDF format covering a year V002
This file contains the MISR Level 3 Global Cloud public Product in netCDF format covering a year.MI3YCLDN_002 is the Multi-angle Imaging SpectroRadiometer (MISR) Level 3 Global Cloud Public Product in netCDF format covering a year version 2 data product. It is a global summary of the Level 1 and Level 2 cloud parameters of interest averaged over a year and reported on a geographic grid; it has multiple data layers with varying temporal resolutions of 0.5 degrees by 0.5 degrees and 2.5 degrees by 2.5-degree resolution. Data collection for this product is ongoing.The MISR instrument consists of nine push-broom cameras that measure radiance in four spectral bands. Global coverage is achieved in nine days. The cameras are arranged with one camera pointing toward the nadir, four forward, and four aftward. It takes seven minutes for all nine cameras to view the same surface location. The view angles relative to the surface reference ellipsoid are 0, 26.1, 45.6, 60.0, and 70.5 degrees. The spectral band shapes are nominally Gaussian, centered at 443, 555, 670, and 865 nm.MISR isdesigned to view Earth with cameras pointed in 9 different directions. As the instrument flies overhead, each piece of Earth's surface below is successfully imaged by all nine cameras in 4 wavelengths (blue, green, red, and near-infrared). The goal of MISR is to improve our understanding of the effects of sunlight on Earth and distinguish different types of clouds, particles, and surfaces. Specifically, MISR monitors the monthly, seasonal, and long-term trends in three areas: 1) amount and type of atmospheric particles (aerosols), including those formed by natural sources and by human activities; 2) amounts, types, and heights of clouds, and 3) distribution of land surface cover, including vegetation canopy structure.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.