Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

2,322

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

2,322 results for “precipitations”

Learn how ShareScore rates datasets ↗
nasa28/100

GPM SSMIS on F17 (GPROF) Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFF17SSMIS) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa28/100

Amazon River Basin Precipitation, 1972-1992

The Amazon River Basin precipitation grids were derived from data which was collected daily by the gauging network operated by the Divisao Nacional de Aguas e Energia Eletrica (DNAEE, SGAN 603 Modulo J, Anexo DNC, CEP 70.830-030 Brasilia DF, Brazil). The DNAEE provided the Earth Observing System (EOS) Regional Amazon Model (EOSRAM) project with this data for cooperative analysis. The project includes both empirical and modeling studies of rainfall and runoff from sample hillslopes to the entire Amazon basin. The precipitation data is 0.2 degree gridded monthly precipitation data. The data spans the period from January 1972 to December 1992.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM DPR Ku Precipitation Profile 2A 1.5 hours 5 km V07 (GPM_2AKu) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The 2AKu algorithm is a single-frequency retrieval that relies on Ku-band data only, and provides precipitation estimates from the Ku radar of the Dual-Frequency Precipitation Radar on the core GPM spacecraft. The Ku Level-2A product, 2AKu, ”Ku precipitation,” is written as a 1 swath structure. The swath is NS, normal scans. Since the Ku-band channel of the Dual-Frequency Precipitaiton Radar (DPR) is very similar to the TRMM PR, the principal challenge in the development of the DPR level 2 algorithms is to combine the new Ka-band data with the Ku-band data. It is important to note the difference between the single- and the dual-frequency (DF) algorithms. While this 2AKu dataset is a single-frequency retrieval, the DF algorithm employs both KuPR and KaPR L1B standard products as inputs. The DF algorithm cannot be executed unless both L1B products are available. Pixels observed by DPR can be categorized into three types: pixels in the inner swath of normal scans (observed both by KuPR and KaPR), pixels in the outer swath of normal scans (observed only by KuPR), and pixels in the interleaved scans (observed only by KaPR in the high-sensitivity mode). The KuPR algorithm is executed for pixels in both inner and outer swaths of normal scans. The KaPR algorithm is executed for pixels in the inner swath of normal scans and in the interleaved scans. The DF algorithm is executed for pixels of all the three kinds.

restrictednotspecifiedApr 2025View details →
nasa28/100

Airborne Precipitation Radar 3rd Generation (APR-3) CPEX-AW

The Airborne Precipitation Radar 3rd Generation (APR-3) CPEX-AW dataset consists of radar reflectivity, Doppler velocity for all bands, linear depolarization ratio Ku-band, and normalized radar cross section measurements at Ka- and Ku- bands data collected by the APR-3 onboard the NASA DC-8 aircraft. These data were gathered during the Convective Processes Experiment – Aerosols & Winds (CPEX-AW) field campaign. CPEX-AW was a joint effort between the US National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) with the primary goal of conducting a post-launch calibration and validation activities of the Atmospheric Dynamics Mission-Aeolus (ADM-AEOLUS) Earth observation wind Lidar satellite in St. Croix. These data files are available from August 20, 2021 through September 4, 2021 in a MatLab file, with associated browse files in JPEG format.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM DPR Precipitation Profile 1 Day Ascending 0.25 degree x 0.25 degree V07 (GPM_3DPR_ASC) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.. The Level 3 DPR products present the user with summary information over daily and monthly time periods. These gridded products are in a convenient gridded form and can be used easily in comparisons with other satellite and ground data. The Level 3 DPR algorithm accumulates instantaneous precipitation estimates from the Level 2 retrieval algorithms into grids over a day and month time span. There are two grid resolutions: 5.0 degrees and 25 kms. For each grid box, the core statistics are the number of measurements, mean, and standard deviation. Most variables are also conditioned on surface type and precipitation type with other three-dimensional fields adding the height above the ellipsoid. Unless otherwise specified, the means are conditioned on precipitation being present (rain rate > 0). For the daily product, the mean square statistic is saved rather than the standard deviation. In addition to the daily and monthly products is a simplified joint daily product that contains a subset of the fields from the full daily product.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM SSM/I on F13 (GPROF) Climate-based Radiometer Precipitation Profiling L2 1.5 hours 12 km V07 (GPM_2AGPROFF13SSMI_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F11, F13, F14, F15); SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM DPR and GMI Combined Precipitation L2B 1.5 hours 5 km V07 (GPM_2BCMB) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The same algorithm has been applied to TRMM observations (December 1997 - April 2015) and these data can be found under product name GPM_2BCMB_TRMM.This is a precipitation product created from the combination of the Global Precipitation Measurement (GPM) Microwave Imager (GMI) and Dual-frequency Precipitation Radar (DPR) instruments.The 2BCMB product uses data from the Dual-Frequency Precipitation Radar and GMI, determining the precipitation structure that best fits the combined data from these instruments. It is the Level 2 DPR and GMI Combined precipitation product that contains the data acquired by the GPM instruments in one orbit, or granule. It is written as a two-swath structure. The first swath, NS (normal scan), contains 49 rays per scan that match the KuPR rays. It is calculated from the KuPR and GMI data. The second swath, MS (matched scan), contains 25 rays per scan that match the 25 KaPR rays. It is calculated from the KuPR, KaPR, and GMI data.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM Ground Validation Self-Calibrating Multivariate Precipitation Retrieval (SCaMPR) IPHEx V1

The GPM Ground Validation Self-Calibrating Multivariate Precipitation Retrieval (SCaMPR) IPHEx dataset contains rainfall rate measurements derived using the SCaMPR algorithm to combine GOES infrared (IR) data and derived parameters as inputs. The SCaMPR algorithm is calibrated using microwave rainfall estimates from the Special Sensor Microwave/Imager (SSM/I) and Advanced Microwave Sounding Unit (AMSU). This dataset contains the values for the time period of the IPHEx campaign from April 30, 2015 to June 17, 2015. The IPHEx campaign was designed to characterize warm season orographic precipitation regimes and determine the relationship between precipitation regimes and hydrologic processes in regions of complex terrain. These data are available in netCDF-4 format, while browse images are available in GIF format.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM GMI (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFGPMGMI_DAY_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM IMERG Final Precipitation L3 1 day 0.1 degree x 0.1 degree V07 (GPM_3IMERGDF) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The Integrated Multi-satellitE Retrievals for GPM (IMERG) IMERG is a NASA product estimating global surface precipitation rates at a high resolution of 0.1° every half-hour beginning 2000. It is part of the joint NASA-JAXA Global Precipitation Measurement (GPM) mission, using the GPM Core Observatory satellite as the standard to combine precipitation observations from an international constellation of satellites using advanced techniques. IMERG can be used for global-scale applications as well as over regions with sparse or no reliable surface observations. The fine spatial and temporal resolution of IMERG data allows them to be accumulated to the scale of the application for increased skill. IMERG has three Runs with varying latencies in response to a range of application needs: rapid-response applications (Early Run, 4-h latency), same/next-day applications (Late Run, 14-h latency), and post-real-time research (Final Run, 3.5-month latency). While IMERG strives for consistency and accuracy, satellite estimates of precipitation are expected to have lower skill over frozen surfaces, complex terrain, and coastal zones. As well, the changing GPM satellite constellation over time may introduce artifacts that affect studies focusing on multi-year changes.This dataset is the GPM Level 3 IMERG *Final* Daily 10 x 10 km (GPM_3IMERGDF) derived from the half-hourly GPM_3IMERGHH. The derived result represents the Final estimate of the daily mean precipitation rate in mm/day. The dataset is produced by first computing the mean precipitation rate in (mm/hour) in every grid cell, and then multiplying the result by 24. This minimizes the possible dry bias in versions before "07", in the simple daily totals for cells where less than 48 half-hourly observations are valid for the day. The latter under-sampling is very rare in the combined microwave-infrared and rain gauge dataset, variable "precipitation", and appears in higher latitudes. Thus, in most cases users of global "precipitation" data will not notice any difference. This correction, however, is noticeable in the high-quality microwave retrieval, variable "MWprecipitation", where the occurrence of less than 48 valid half-hourly samples per day is very common. The counts of the valid half-hourly samples per day have always been provided as a separate variable, and users of daily data were advised to pay close attention to that variable and use it to calculate the correct precipitation daily rates. Starting with version "07", this is done in production to minimize possible misinterpretations of the data. The counts are still provided in the data, but they are only given to gauge the significance of the daily rates, and reconstruct the simple totals if someone wishes to do so. The latency of the derived *Final* Daily product depends on the delivery of the IMERG *Final* Half-Hourly product GPM_IMERGHH. Since the latter are delivered in a batch, once per month for the entire month, with up to 4 months latency, so will be the latency for the Final Daily, plus about 24 hours. Thus, e.g. the Dailies for January can be expected to appear no earlier than April 2. The daily mean rate (mm/day) is derived by first computing the mean precipitation rate (mm/hour) in a grid cell for the data day, and then multiplying the result by 24. Thus, for every grid cell we have Pdaily_mean = SUM{Pi * 1[Pi valid]} / Pdaily_cnt * 24, i=[1,Nf]Where:Pdaily_cnt = SUM{1[Pi valid]}Pi - half-hourly input, in (mm/hr)Nf - Number of half-hourly files per day, Nf=481[.] - Indicator function; 1 when Pi is valid, 0 otherwisePdaily_cnt - Number of valid retrievals in a grid cell per day.Grid cells for which Pdaily_cnt=0, are set to fill value in the Daily files.Note that Pi=0 is a valid value.Pdaily_cnt are provided in the data files as variables "precipitation_cnt" and "MWprecipitation_cnt", for correspondingly the microwave-IR-gauge and microwave-only retrievals. They are only given to gauge the significance of the daily rates, and reconstruct the simple totals if someone wishes to do so. There are various ways the daily error could be estimated from the source half-hourly random error (variable "randomError"). The daily error provided in the data files is calculated in a fashion similar to the daily mean precipitation rate. First, the mean of the squared half-hourly "randomError" for the day is computed, and the resulting (mm^2/hr) is converted to (mm^2/day). Finally, square root is taken to get the result in (mm/day):Perr_daily = { SUM{ (Perr_i)^2 * 1[Perr_i valid] ) } / Ncnt_err * 24}^0.5, i=[1,Nf]Ncnt_err = SUM( 1[Perr_i valid] )where:Perr_i - half-hourly input, "randomError", (mm/hr)Perr_daily - Magnitude of the daily error, (mm/day)Ncnt_err - Number of valid half-hour error estimatesAga

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM AMSR-2 on GCOM-W1 (GPROF) Climate-based Radiometer Precipitation Profiling L3 1 month 0.25 degree x 0.25 degree V07 (GPM_3GPROFGCOMW1AMSR2_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM IMERG Final Precipitation L3 Half Hourly 0.1 degree x 0.1 degree V07 (GPM_3IMERGHH) at GES DISC

Version 07B is the current version of the IMERG data sets. Older versions will no longer be available and have been superseded by Version 07.The Integrated Multi-satellitE Retrievals for GPM (IMERG) is the unified U.S. algorithm that provides the multi-satellite precipitation product for the U.S. GPM team.The precipitation estimates from the various precipitation-relevant satellite passive microwave (PMW) sensors comprising the GPM constellation are computed using the 2021 version of the Goddard Profiling Algorithm (GPROF2021), then gridded, intercalibrated to the GPM Combined Ku Radar-Radiometer Algorithm (CORRA) product, and merged into half-hourly 0.1°x0.1° (roughly 10x10 km) fields. Note that CORRA is adjusted to the monthly Global Precipitation Climatology Project (GPCP) Satellite-Gauge (SG) product over high-latitude ocean to correct known biases.The half-hourly intercalibrated merged PMW estimates are then input to both a Morphing-Kalman Filter (KF) Lagrangian time interpolation scheme based on work by the Climate Prediction Center (CPC) and the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks (PERSIANN) Dynamic Infrared–Rain Rate (PDIR) re-calibration scheme. In parallel, CPC assembles the zenith-angle-corrected, intercalibrated merged geo-IR fields and forwards them to PPS for input to the PERSIANN-CCS algorithm (supported by an asynchronous re-calibration cycle) which are then input to the KF morphing (quasi-Lagrangian time interpolation) scheme.The KF morphing (supported by an asynchronous KF weights updating cycle) uses the PMW and IR estimates to create half-hourly estimates. Motion vectors for the morphing are computed by maximizing the pattern correlation of successive hours within each of the precipitation (PRECTOT), total precipitable liquid water (TQL), and vertically integrated vapor (TQV) data fields provided by the Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2) and Goddard Earth Observing System model Version 5 (GEOS-5) Forward Processing (FP) for the post-real-time (Final) Run and the near-real-time (Early and Late) Runs, respectively. The vectors from PRECTOT are chosen if available, else from TQL, if available, else from TQV. The KF uses the morphed data as the “forecast” and the IR estimates as the “observations”, with weighting that depends on the time interval(s) away from the microwave overpass time. The IR becomes important after about ±90 minutes away from the overpass time. Variable averaging in the KF is accounted for in a routine (Scheme for Histogram Adjustment with Ranked Precipitation Estimates in the Neighborhood, or SHARPEN) that compares the local histogram of KF morphed precipitation to the local histogram of forward- and backward-morphed microwave data and the IR.The IMERG system is run twice in near-real time:"Early" multi-satellite product ~4 hr after observation time using only forward morphing and"Late" multi-satellite product ~14 hr after observation time, using both forward and backward morphingand once after the monthly gauge analysis is received:"Final", satellite-gauge product ~4 months after the observation month, using both forward and backward morphing and including monthly gauge analyses.In V07, the near-real-time Early and Late half-hourly estimates have a monthly climatological concluding calibration based on averaging the concluding calibrations computed in the Final, while in the post-real-time Final Run the multi-satellite half-hourly estimates are adjusted so that they sum to the Final Run monthly satellite-gauge combination. In all cases the output contains multiple fields that provide information on the input data, selected intermediate fields, and estimation quality. In general, the complete calibrated precipitation, precipitation, is the data field of choice for most users.Briefly describing the Final Run, the input precipitation estimates computed from the various satellite passive microwave sensors are intercalibrated to the CORRA product (because it is presumed to be the best snapshot TRMM/GPM estimate after adjustment to the monthly GPCP SG), then "forward/backward morphed" and combined with microwave precipitation-calibrated geo-IR fields, and adjusted with seasonal GPCP SG surface precipitation data to provide half-hourly and monthly precipitation estimates on a 0.1°x0.1° (roughly 10x10 km) grid over the globe. Precipitation phase is a diagnostic variable computed using analyses of surface temperature, humidity, and pressure. The current period of record is June 2000 to the present (delayed by about 4 months).

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM SSMIS on F17 (GPROF) Climate-based Radiometer Precipitation Profiling 1.5 hours 12 km V07 (GPM_2AGPROFF17SSMIS_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors:+ TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F15), SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided.The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an apriori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.

restrictednotspecifiedApr 2025View details →
nasa28/100

NASA MEASURES Precipitation Ensemble based on SSMIS DMSP F17 NASA PPS L1C V05 Tbs 1-orbit L2 Swath 12x12km V1 (PRECIP_SSMIS_F17) at GES DISC

The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Special Sensor Microwave Imager Sounder (SSMIS) flown on the US Defense Meteorological Satellite Program (DMSP) F17 mission. Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 2008 to 2020 with one file per orbit.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM Ground Validation TRMM 2A25 NRT Precipitation Radar IPHEx V7

The GPM Ground Validation TRMM 2A25 NRT Precipitation Radar IPHEx data are estimates of instantaneous three-dimensional distribution of rain from the Tropical Rainfall Measuring Mission (TRMM) Precipitation Radar (PR). The TRMM 2A25 (NRT) orbital precipitation radar data from NASA GES DISC have been extracted for the southeast US region for May 1 to June 16, 2014 during the GPM Ground Validation Integrated Precipitation and Hydrology Experiment (IPHEx) field campaign. This data product contains the average rainfall rate between two predefined altitudes derived from each radar beam position. Other output data include parameters of Z-R relationships (R=aZb), integrated rain rate of each beam, range bin numbers of rain layer boundaries, and many intermediate parameters. Data files are available in HDF-4 format, while corresponding browse images are also available in PNG format.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM GMI (GPROF) Climate-based Radiometer Precipitation Profiling L2A 1.5 hours 4 km x 4 km V07 (GPM_2AGPROFGPMGMI_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions will no longer be available and have been superseded by Version 07.The 'CLIM' products differ from their 'regular' counterparts (without the 'CLIM' in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the 'CLIM' output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.The 2AGPROF (also known as, GPM GPROF (Level 2)) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors: + TMI (TRMM)+ GMI, (GPM)+ SSMI (DMSP F15), SSMIS (DMSP F16, F17, F18, F19)+ AMSR2 (GCOM-W1)+ MHS (NOAA 18,19) + MHS (METOP A,B)+ ATMS (NPP)+ SAPHIR (MT1)This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are near-realtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided. The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an a-priori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.

restrictednotspecifiedApr 2025View details →
nasa28/100

GPM MHS on METOP-A (GPROF) Radiometer Precipitation Profiling L3 1 day 0.25 degree x 0.25 degree V07 (GPM_3GPROFMETOPAMHS_DAY_CLIM) at GES DISC

Version 07 is the current version of the data set. Older versions are no longer available and have been superseded by Version 07.The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals.3GPROF products provide global gridded monthly/daily precipitation averages from multiple satellites that can be used for climate studies. The 3GPROF products are based on retrievals from high-quality microwave sensors, which are sensitive to liquid and ice-phase precipitation hydrometeors in the atmosphere.The purpose of the 3GPROF algorithm is to provide monthly and daily mean precipitation and related retrieved parameters from the Level 2 GPROF precipitation profiling algorithm for the GPM core and constellation satellites. Each 3GPROF product contains global 0.25 degree x 0.25 degree gridded monthly/daily means. Because this product is an accumulation of the Level 2 retrieval products, much more information is available via the GPROF Level 2 documentation.

restrictednotspecifiedApr 2025View details →
nasa28/100

ABoVE: Bias-Corrected IMERG Monthly Precipitation for Alaska and Canada, 2000-2020

This dataset is a modification to the Integrated Multi-satellitE Retrievals for GPM (IMERG) Final Run microwave-only, daily precipitation Version 06 data. It provides bias-corrected IMERG monthly precipitation data for Alaska and Canada from June 2000 through December 2020 in Cloud-Optimized GeoTIFF (*.tif) format. Data are provided in the units of mm/day. NASA's IMERG data product is one of the most advanced satellite precipitation products with a 0.1-degree spatial resolution and near global coverage. This dataset bias-corrected IMERG's HQprecipitation precipitation estimates, which are based on passive microwave (PMW)-only retrievals, using a linear regression method. This method utilizes empirical measurements from rain gauge stations from the Global Historical Climatology Network (GHCN) and a digital elevation model. This bias correction approach improves estimates at elevations above 500 m a.s.l., which are typically underestimated.

restrictednotspecifiedApr 2025View details →
nasa28/100

AIRS/Aqua L2G Precipitation Estimate (AIRS-only) V006 (AIRG2SSD_IRonly) at GES DISC

The Atmospheric Infrared Sounder (AIRS) is a grating spectrometer (R = 1200) aboard the second Earth Observing System (EOS) polar-orbiting platform, EOS Aqua. This precipitation estimate from AIRS IR only is using a TOVS-like algorithm, and is intended for merging into the precipitation product of the Global Precipitation Climatology Project (GPCP). The precipitation estimate from AIRS Level 2 Support product, which are 6-min swath granules (240 per day) are combined here into one daily "Level 2G" global grid with dimensions (24x1440x720). Thus every hour is a "layer", and the resulting grid cell size is 0.25 degree (~25 km). Thus the grid size is made to fit TRMM products. Since AIRS precipitation is retrieved at AMSU footprint resolution, which is about 45 km at nadir, many grid cells in this 0.25-deg grid are "empty". The data are stored such that the first line is the South Pole. The geolocation information for every hour-layer is also provided in the file.

restrictednotspecifiedApr 2025View details →
nasa28/100

NASA MEASURES Precipitation Ensemble based on AMSR2 GCOMW1 NASA PPS L1C V05 TBs 1-orbit L2 Swath 10x10km V1 (PRECIP_AMSR2_GCOMW1) at GES DISC

The data presented in this level 2 orbital product are rain rate estimates expressed as mm/hour determined from brightness temperatures (Tbs) obtained from the Advanced Microwave Scanning Radiometer-2 (AMSR-2) flown on the Global Climate Observing Mission-Water 1 (GCOM-W1). Most of the products generated in this data set are based upon the algorithms developed for the 3rd Algorithm Intercomparison Project (AIP-3) of the Global Precipitation Climatology Project (GPCP). Details of these 15 algorithms and development of a quality score which is a measure of confidence in the estimate, along with processing and algorithmic flags, can be found in the Algorithm Theoretical Basis Document (ATBD). The data in this product cover the period from 2012 to 2020 with one file per orbit.

restrictednotspecifiedApr 2025View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.