Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
61
datasets available to search
ShareScore release 0.9.0
Dataset results
61 results for “ADCP”
MCR LTER: Coral Reef: Ocean Currents and Biogeochemistry: salinity, temperature and current at CTD and ADCP mooring FOR01 from 2004 ongoing
Moored and bottom-mounted instrumentation (ADCP, CTD, thermistors, wave-tide meters) sampled year-round on the reef of Moorea Island, French Polynesia at LTER 1 fore reef site (FOR01). Sampling began in 2005. All data have been interpolated onto a 20 min grid. ADCP data are organized into 1-meter bins, measured as height from the bottom, to a maximum of 20 bins. All bins may not be filled, and although post-processing attempted to exclude data from bins 'above the surface', users need to exercise caution with the near-surface bins. CTD parameters include Pressure, Temperature, Conductivity, Salinity, and Density. The two moored CTD packages are located approximately 5 and 14 meters above the bottom and there are up to 5 additional temperature thermistors spaced vertically along the mooring line. Note that the upper CTD and temperature thermistor data were terminated in 2020, and the bottom CTD was terminated in February 2022. There are 2 bottom mounted thermistors in the vicinity of the mooring at 10 and 20 meter depth. A bottom-mounted wave-tide meter at 10-meter depth provides a measure of significant wave height and dominant wave period at a 2-hour sampling interval. Tide-related data may be calculated from bottom-mounted pressure sensor data.
MCR LTER: Coral Reef: Ocean Currents and Biogeochemistry: salinity, temperature and current at CTD and ADCP mooring FOR04 from 2004 ongoing
Moored and bottom-mounted instrumentation (ADCP, CTD, thermistors, wave-tide meters) sampled year-round on the reef of Moorea Island, French Polynesia at LTER 4 fore reef site (FOR04). Sampling began in 2005. All data have been interpolated onto a 20 min grid. ADCP data are organized into 1-meter bins, measured as height from the bottom, to a maximum of 20 bins. All bins may not be filled, and although post-processing attempted to exclude data from bins 'above the surface', users need to exercise caution with the near-surface bins. CTD parameters include Pressure, Temperature, Conductivity, Salinity, and Density. The two moored CTD packages are located approximately 5 and 14 meters above the bottom, and there are up to 5 additional temperature thermistors spaced vertically along the mooring line. Note that the upper CTD and temperature thermistor data were terminated in January 2020. Bottom CTD was terminated July 2021. There are 2 bottom mounted thermistors in the vicinity of the mooring at 10 and 20 meter depth. A bottom-mounted wave-tide meter provides a measure of significant wave height and dominant wave period at a 2-hour sampling interval. Tide-related data may be calculated from bottom-mounted pressure sensor data.
MCR LTER: Coral Reef: Ocean Currents and Biogeochemistry: salinity, temperature and current at CTD and ADCP mooring FOR05 from 2005 ongoing
Moored and bottom-mounted instrumentation (ADCP, CTD, thermistors, wave-tide meters) sampled year-round on the reef of Moorea Island, French Polynesia at LTER 5 fore reef site (FOR05). Sampling began in 2005. All data have been interpolated onto a 20-minute grid. ADCP data are organized into 1-meter bins, measured as height from the bottom, to a maximum of 20 bins. All bins may not be filled, and although post-processing attempted to exclude data from bins 'above the surface', users need to exercise caution with the near-surface bins. CTD parameters include Pressure, Temperature, Conductivity, Salinity, and Density. The two moored CTD packages are located approximately 5 and 14 meters above the bottom, and there are up to 5 additional temperature thermistors spaced vertically along the mooring line. Note that the upper CTD was terminated in July 2020, the bottom CTD was terminated in October 2021, and the temperature thermistor data was terminated in January 2020. There are 2 bottom-mounted thermistors in the vicinity of the mooring at 10 and 20 meter depth. A bottom-mounted wave-tide meter provides a measure of significant wave height and dominant wave period at a 2-hour sampling interval. Tide-related data may be calculated from bottom-mounted pressure sensor data.
North Temperate Lakes LTER: High Frequency Meteorological - Trout Lake Buoy2 - ADCP 2005 - 2006
This instrumented buoy on Trout Lake is equipped with a thermistor chain and meteorological sensors that provide fundamental information on lake thermal structure, weather conditions, and lake metabolism. An acoustic Doppler current profiler (ADCP) is associated with this buoy. Data are usually collected every 10 minutes with occasional periods of 2 minute data for short periods to answer specific questions. The thermistors are placed every 0.5-1m from the surface through 13m, and meteorological sensors measure relative humidity, air temperature and wind parameters. In the fall of 2005, the buoy also included 4 Greenspan dissolved oxygen sensors placed at depths from the lake surface to 10m. After correcting for flux to or from the atmosphere and vertical mixing within the water column, high frequency measurements of dissolved gases such as carbon dioxide and oxygen can be used to estimate gross primary productivity, respiration, and net ecosystem productivity, the basic components of whole lake metabolism. Sampling Frequency: varies for instantaneous sample. averaged to hourly and daily values from one minute samples Number of sites: 1
North Temperate Lakes LTER: High Frequency Water Temperature Data - Trout Lake Buoy2 - ADCP 2005 - 2006
This instrumented buoy on Trout Lake is equipped with a thermistor chain that measures water temperature from depths placed every 0.5-1m from the surface through 13m. The Trout Lake buoy is also equipped with meteorological sensors that provide fundamental information on lake thermal structure and weather conditions. An acoustic Doppler current profiler (ADCP) is associated with this buoy. Data are usually collected every 10 minutes with occasional periods of 2 minute data for short periods to answer specific questions. After correcting for flux to or from the atmosphere and vertical mixing within the water column, high frequency measurements of dissolved gases such as carbon dioxide and oxygen can be used to estimate gross primary productivity, respiration, and net ecosystem productivity, the basic components of whole lake metabolism. Sampling Frequency: varies for instantaneous sample. averaged to hourly and daily values from one minute samples Number of sites: 1
North Temperate Lakes LTER: High Frequency Dissolved Oxygen Data - Trout Lake Buoy2 - ADCP 2005
During the fall 2005, this instrumented buoy on Trout Lake was equipped with 4 Greenspan dissolved oxygen sensors placed at depths from the lake surface to 10m. Parameters measured at each depth included dissolved oxygen (DO), DO saturation and water temperature. Currently, this buoy measures air temperature, relative humidity and various wind parameters. It also is equipped with a thermistor chain that measures water temperature from depths placed every 0.5-1m from the surface through 13m. An acoustic Doppler current profiler (ADCP) is associated with this buoy. Data are usually collected every 10 minutes with occasional periods of 2 minute data for short periods to answer specific questions. After correcting for flux to or from the atmosphere and vertical mixing within the water column, high frequency measurements of dissolved gases such as carbon dioxide and oxygen can be used to estimate gross primary productivity, respiration, and net ecosystem productivity, the basic components of whole lake metabolism. Dissolved oxygen (DO) data were collected for period 27 Aug 2005 through 3 Nov 2005. Sampling Frequency: varies for instantaneous sample. averaged to hourly and daily values from one minute samples Number of sites: 1
Processed glider data: 9 months of hydrographic and ADCP observations in the Gulf of Oman.
<p>68 repeat transects and 2 virtual moorings covering a spring/neap cycle collected by a SeaExplorer glider with T, S, O2, Chl, Optical backscatter, PAR and ADCP data in the Gulf of Oman. Dataset collected as part of the ONR Global project "Shelf slope dyanmics in the Sea of Oman: How submesoscale processes control food and water security". The glider was deployed from the north shore of Oman into the Gulf of Oman, sampling down to 1000m in the oxygen minimum zone.</p> <p> </p> <p>File and variable metadata included in the netCDF files.</p> <p> </p> <p>sea057_M##.ad2cp.#####.nc : Raw ADCP data provided in Nortek .nc format. (version 1.0)</p> <p>SEA057_glider.nc : SeaExplorer data timeseries QC'd and processed into a 1Hz timeseries. (version 1.0)</p> <p>SEA057_ADCP_v2.nc : ADCP data fully processed, binned (2 dbar) and referenced, and then reprojected back onto a timeseries. ADCP data processed as per https://github.com/bastienqueste/gliderad2cp . (version v3)</p> <p> </p>
SBC LTER: Ocean: Ocean Currents and Biogeochemistry: Moored CTD and ADCP data from Arroyo Quemado, Site AQM
ADCP (Currents), CTD (Hydrography) and Optics (Fluorescence, Beam Attenuation, and Volume Scattering Function) data were collected year-round on the reef at Arroyo Quemado in the Santa Barbara Channel. The data contained here is for sampling site AQM, occupied for ~3 years, until kelp cover increased and obstucted flow to the reef. The mooring was moved about 200m to the SE in November 2004 to a new site named ARQ (data in package id knb-lter-sbc.2005). Data have been interpolated to a 20 min interval. ADCP data are orgainized into 1-meter bins, measured as height from the bottom, to a maximum of 16 bins. All bins may not be filled,and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two.
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Naples Reef Mooring (NAP), ongoing since 2001
ADCP (Currents), CTD (Hydrography) and Optics data (Fluorescence, Beam Attenuation and Volume Scattering Function) were collected at Naples Reef in the Santa Barbara Channel (site ID: NAP). Data have been interpolated to a 20 minute interval. ADCP data are binned at a 1.0 meter interval, measured as height from the bottom to a maximum of 16 bins. All bins may not be filled, and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two.
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Arroyo Burro Reef Mooring (ARB)
ADCP (Currents), CTD (Hydrography) and Optics data (Fluorescence, Beam Attenuation, and Volume Scattering Function) were collected at Arroyo Burro Reef Mooring in the Santa Barbara Channel. The data contained here are for sampling site ARB. Data have been interpolated to a 20 min interval. ADCP data are orgainized into 1.0 meter bins (measured as height from the bottom) to a maximum of 16 bins. All bins may not be filled, and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two.
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Carpinteria Reef Mooring (CAR, ongoing since 2001
ADCP (Currents), CTD (Hydrography) and Optics data (Fluorescence, Beam Attenuation and Volume Scattering Function) were collected at Carpinteria Reef in the Santa Barbara Channel (site ID: CAR). Data have been interpolated to a 20 minute interval. ADCP data are binned at a 0.5 meter interval, measured as height from the bottom to a maximum of 16 bins. All bins may not be filled, and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two.
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Arroyo Quemado Reef Mooring (ARQ), ongoing since 2004
ADCP (Currents), CTD (Hydrography) and Optics data (Fluorescence, Beam Attenuation and Volume Scattering Function) were collected at Arroyo Quemado Reef in the Santa Barbara Channel (site ID: ARQ). Data have been interpolated to a 20 minute interval. ADCP data are binned at a 1.0 meter interval, measured as height from the bottom to a maximum of 16 bins. All bins may not be filled, and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two.
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Mohawk Outside Spar (MKO), ongoing since 2005
ADCP (Currents), CTD (Hydrography) and Optics data (Fluorescence, Beam Attenuation and Volume Scattering Function) were collected at Mohawk Reef in the Santa Barbara Channel (site ID: MKO). Data have been interpolated to a 20 minute interval. ADCP data are binned at a 0.5 meter interval, measured as height from the bottom to a maximum of 16 bins. All bins may not be filled, and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two.
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Alegria Reef Mooring (ALE), 1999-2021
ADCP (Currents), CTD (Hydrography) and Optics data (Fluorescence, Beam Attenuation and Volume Scattering Function) were collected at Alegria in the Santa Barbara Channel (site ID: ALE). Data have been interpolated to a 20 minute interval. ADCP data are binned at a 1.0 meter interval, measured as height from the bottom to a maximum of 16 bins. All bins may not be filled, and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two. The mooring data collection was terminated in 2021.
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Santa Barbara Harbor Mooring (SBH), ongoing since 1999
CTD (Hydrography) data were collected at Santa Barbara Harbor (site ID: SBH). Data have been interpolated to a 20 minute interval. The CTD data for this site are harvested from SCCOOS (http://sccoos.org/) and processed in Matlab.
ADCP wave and current data at Hog Island and Chimney Pole Marsh, VA 2009
Two acoustic doppler profilers were deployed in on Hog Island and Chimney Pole Marsh in 2009. all quantites (velocity, waves, water elevation, attenuation) are described in the file *.hdr (header file)
Temperature and ADCP data collected on Lake Geneva between 2015 and 2017
<p>Data collected between 2015 and 2017 on Lake Geneva by Acoustic Doppler Current Profiler (ADCP) and CTDs. One file includes all the temperature profiles, the two others are the ADCP data (up- and down-looking) at the SHL2 station (centre of the main basin). Coordinates of the SHL2 station are 534700 and 144950 in the Swiss CH1903 coordinate system. The file with the CTD data contains the coordinates of the sample location (lat, lon), times (in MATLAB time), depths (in meters) and temperatures (in °C).</p> <p>All files are in MATLAB .mat format.</p>
Shipborne ADCP data in the Thwaites Gyre region, 2019
<p>This dataset contains the velocity profiles in the Thwaites Gyre region collected by the shipborne Acoustic Doppler Current Profiler (ADCP) onboard RV Nathaniel B Palmer in 2019 under the project Thwaites-Amundsen Regional Survey and Network Integrating Atmosphere-Ice-Ocean Processes (TARSAN). Ocean current velocities over the upper 980 m of the water column were obtained using a 75 kHz Ocean Surveyor (OS75) and a 38 kHz Ocean Surveyor (OS38) shipboard Acoustic Doppler Current Profiler (sADCP). Common Ocean Data Access System (CODAS) processing has been run to generate the NetCDF files. The authors made additional quality control including, 1. removing data with velocity values higher than 0.6 m/s and other obvious outliners, and 2. removing data below 400 m for OS75 and data below 760 m for OS38 as the last several levels in the velocity profiles are believed to be potentially affected by the water turbidity and bubbles passing below the sADCP etc. The data are stored in .txt format and .mat MATLAB format.</p>
ADCP Data from the Chukchi Sea, Arctic Ocean, acquired during the R/V Marcus G. Langseth expedition MGL1112
<p>This is a processed acoustic Doppler current profiler (ADCP) dataset, provided by Andrew Frambach and Jules Hummon, acquired in September 2011 during the MGL1112 cruise at Chukchi Borderland, Arctic Ocean.</p>
SBC LTER: Ocean: Currents and Biogeochemistry: Moored CTD and ADCP data from Purisima Mooring (PUR), 1999-2016
ADCP (Currents), CTD (Hydrography) and Optics data (Fluorescence, Beam Attenuation and Volume Scattering Function) were collected at La Purisima (site ID: PUR), north of Point Conception. Data have been interpolated to a 20 minute interval. ADCP data are binned at a 1.0 meter interval, measured as height from the bottom to a maximum of 16 bins. All bins may not be filled, and in some cases, data from bins technically above the surface are included. VSF data are available at angles, 100, 125 and 150 degrees. CTD parameters include Pressure, Temperature, Conductivity, Salinity, Density and Fluorescence. The CTD array is located approximately 4.5 meters from the surface, and there are additional temperature thermistors near the CTD array, at the bottom, and mid way between these two.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.