Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
131
datasets available to search
ShareScore release 0.9.0
Dataset results
131 results for “Critical Materials”
From waste to value: Recovering critical raw materials from urban mines in the European Union and the United States
<p><strong>Submitted data was used to write an article: </strong>Jędrusiak, R., Bielowicz, B., Drobniak, A., 2023, From waste to value: Recovering critical raw materials from urban mines in the European Union and the United States, Mineral Resource Management 39 (3), 43-63. <a href="https://doi.org/10.24425/gsm.2023.147557">https://doi.org/10.24425/gsm.2023.147557</a></p> <p> </p> <p><strong>Funding acknowledgments: </strong>Agnieszka Drobniak contribution comes from the support of the Polish National Agency for Academic Exchange within the Polish Returns Programme (BPN/PPO/2021/1/00005/DEC/1), and the National Science Center, Poland (2022/01/1/ST10/00024). This research was funded by the Ministry of Science and Higher Education of Poland (subsidies no. 16.16.140.315).</p> <p> </p> <p><strong>Article Abstract: </strong>Modern human consumption, rapid urbanization and further increases in the world’s population lead to the demand for more goods and materials. However, after utilization, only some of these materials are recovered or recycled, many are discarded due to a lack of implemented recovery technologies and regulations, or due to the content of contaminants. Moreover, many of the potentially recoverable materials are deposited in landfills or shipped to less developed countries for disposal where they can cause environmental contamination. The new approach to waste management follows the hierarchy of waste prevention. First, waste is prepared for reuse and repair without the need for treatment processes, or it is recycled. If this is not possible, the waste is incinerated with energy recovery, or failing that, it is disposed of in landfills. This waste hierarchy has become one of the key factors in the transformation of a linear economy into a circular economy. Particularly noteworthy is waste containing raw materials of significant economic importance, especially those of a high supply risk due to the level of concentration in another country and import dependence. These critical raw materials (CRM) are an inherent part of our modern, technology-driven life. They are essential to national security and the economic development of every country. Their use is drastically increasing, and with it, the need to assure their reliable and unrestricted access along with lowering the environmental impact from their production and extraction. Currently, scientists and industry direct a lot of effort into finding new supplies of these materials, not only from traditional sources in nature but also from new sources like anthropogenic waste. The purpose of this study is to present the raw material potential which remains mostly unused in residues from municipal waste incineration in regions with highly developed economies – the United States and the European Union. These economies have shortages of their own raw material extraction capacity due to high levels of consumption and insufficient amounts of raw-material content in natural resources.</p>
Methodological and practical lessons learned from exploring the material criticality of two hydrogen-related products
<p>As the European Union embarks on the energy transition, several challenges need to be faced to ensure that this shift is conducted from a holistic perspective that avoids burden-shifting across sustainability dimensions. One of the main concerns refers to the future availability of materials that clean technologies require. Critical raw<br>material assessment serves to guide the management of such mineral resources in a new paradigm of increasing demand. This work delves into the methodological fundamentals of several product-level criticality indicators in order to discuss their implications within the context of the ecodesign of two hydrogen-related products. Overall, criticality is advised to be assessed making use of several indicators. In the case study of a proton exchange membrane fuel cell stack, the combined interpretation of criticality indicators leads to identifying platinum as the main hotspot, while yttrium and lanthanum account for the most relevant criticality contributions in the case<br>study of a solid oxide electrolysis cell stack.</p>
Supplementary data to Challenges and Opportunities for the Recovery of Critical Raw Materials from Electronic Waste
<p>Content of the excell file:</p> <p>Table S1: Relationship between UNU-keys and MINCOTUR codes</p> <p>Table S2: UNU-Key composition and alpha and beta values for Weibull distributions</p> <p>Table S3: Metal prices used in this study.</p>
Supplementary Material for 'Leveraging the GIDAS Database for the Criticality Analysis of Automated Driving Systems'
<p>This repository contains the supplementary material for the publication 'Leveraging the GIDAS Database for the Criticality Analysis of Automated Driving Systems'.<br> It consists of four files:</p> <ol> <li>Criticality-Phenomena-Catalog.CSV: The catalog of criticality phenomena (CP)</li> <li>Criticality-Phenomena-Phi-Coefficient.CSV: The calculation of the Phi coefficient between all pairs of CP</li> <li>Criticality-Phenomena-Risk-Calculation.CSV: The case-phenomenon relation matrix, including the calculated values for the risk of each CP for all three severity levels</li> <li>Criticality-Phenomena-Sorted-By-Risk.CSV: A list of the CP from the CP catalog sorted by risk for all three severity classes</li> </ol>
Materials for Resource Abundance and the Critical Transition to Cooperation
<p>This repository contains data, configuration files, and analysis scripts related to <em>Resource Abundance and the Critical Transition to Cooperation</em> (doi:10.1111/jeb.13039). To ensure reproducibility, Avida version 2.12.4, which was used for this work, is also included. Protocols used for the microbial experiments are described in the paper.</p> <p>This archive should contain all of the materials related to the published version of the paper.</p>
Supplementary Material for "Aiding the Design of Critical Software Systems by Iterative Exploration of Distinct Requirement Violation Scenarios"
<p>This dataset provides artifacts about an industrial case study of a Steer-by-Wire system. It collects models of the system modeled in the open-source Gamma Statechart Composition Framework. You can find more information about the framework here: <a href="https://github.com/ftsrg/gamma">https://github.com/ftsrg/gamma</a>.</p>
Mining minerals and critical raw materials from bittern: Understanding metal ions fate in saltwork ponds
<p>Seawater represents a potential resource for raw materials extraction. Although NaCl is the most representative mineral<br> extracted other valuable compounds such as Mg, Li, Sr, Rb and B and elements at trace level (Cs, Co, In, Sc, Ga and<br> Ge) are also contained in this “liquid mine”. Most of them are considered as Critical Raw Materials by the European<br> Union. Solar saltworks, providing concentration factors of up-to 20 to 40, offer a perfect platform for the development<br> of minerals and metal recovery schemes taking benefit of the concentration and purification achieved along the evaporation<br> saltwork ponds.<br> However, the geochemistry of these elements in this environment has not been yet thoroughly evaluated. Their knowledge<br> could enable the deployment of technologies capable to achieve the recovery of valuable minerals. The high ionic<br> strengths expected (0.5–7 mol/kg) and the chemical complexity of the solutions imply that only numerical geochemical<br> codes, as PHREEQC, and the use of Pitzer model to estimate the activity coefficients of the different species in solution<br> can be adopted to provide valuable description of the systems.<br> In the present work, for the first time, PHREEQC Pitzer code database was extended to include the target minor and<br> trace elements using Trapani saltworks (Sicily, Italy) as a case study system. The model was able to predict: i) the purity<br> in halite and the major impurities contained, mainly Ca,Mgand sulphate species; ii) the fate of minor components as B,<br> Sr, Cs, Co, Ge and Ga along the evaporation ponds. The results obtained pose a fundamental step in critical raw materials<br> mining from seawater brine, for process intensification and combination with desalination.</p>
Bulk and critical material demand for selected 'Starter Kit' energy system models - dataset
<p>This repository contains the data related to the Data in Brief article titled: <strong>Bulk and critical material demand for selected ‘Starter Kit’ energy system models.</strong></p> <p>The data include the modeled mass of materials and their embodied emissions. A metadata file is also included to clarify the units, materials and scenario names.</p>
Supplementary material from: Aslan CE, Sikes BA, Gedan KB (2015) Research on mutualisms between native and non-native partners can contribute critical ecological insights. NeoBiota 26: 39-54. https://doi.org/10.3897/neobiota.26.8837
Supplementary material from: Aslan CE, Sikes BA, Gedan KB (2015) Research on mutualisms between native and non-native partners can contribute critical ecological insights. NeoBiota 26: 39-54. https://doi.org/10.3897/neobiota.26.8837
Polymeric and inorganic sorbents as a green option to recover critical raw materials at trace levels from sea saltwork bitterns
<p>Seawater mining is certainly a green alternative source for obtaining minerals as seawater is a natural renewable and unlimited available resource. Based on the lack of ways to obtain certain raw materials, the European Union has created the Critical Raw Materials (CRM) list. Seawater contains almost all elements, including some of those present in the CRM list, but only a few are economically feasible to be extracted as most of them are considered Trace Elements (TEs) (μg L−1). Therefore, an improvement in TEs extraction must be carried out. Saltwork brines can be considered as they are naturally concentrated (20–40 times) compared to seawater, which makes the extraction and recovery of TEs easier. Selective polymeric and inorganic sorbents were evaluated for TEs recovery (Li, B, Co, Ga, Ge, Rb, Sr, and Cs) from synthetic brines mimicking sea saltwork bitterns. Distribution coefficients were determined to characterize selectivity patterns toward TEs. Although amine and sulphonic sorbents showed low sorption of TEs, carboxylic sorbents presented good sorption and recovery for Co and Ga. Among phosphonic/phosphinic sorbents, MTX8010 achieved >98% sorption and desorption of Ga. Aminophosphonic and iminodiacetic are the best sorbents for Sr, but its desorption was incomplete. B was only sorbed by N-Methylglucamine (>98%) and N-Methylpyridine sorbents (75%), and its desorption was 37–64% and 66−>99%, respectively. SbTreat presented good performance targeting Ga and Ge, and CsTreat demonstrated high Cs uptake, but its desorption was unachieved. The most highly selective sorbents could provide the possibility of building a green option to recover critical elements for societal development in the next decade.</p>
A critical perspective on uncertainty appraisal and sensitivity analysis in life cycle assessment - supporting material
<p>Publication dataset - A critical perspective on uncertainty appraisal and sensitivity analysis in life cycle assessment (<em>accepted for publication in the Journal of Industrial Ecology</em>).</p>
Applicability of new sustainable and efficient alginate-based composites for critical raw materials recovery: General composites fabrication optimization and adsorption performance evaluation
<p>This dataset contains the raw data for the publication "Applicability of new sustainable and efficient alginate-based composites for critical raw materials recovery: General composites fabrication optimization and adsorption performance evaluation" by Fila et al, published in Chemical Engineering Journal. The upload includes raw data of physicochemical characterizations of calcium alginate and its composites, i.e. alginate-biochar and alginate-clinoptilolite, including BET, SEM, TG, XPS and XRD analyses. </p>
Sorption strategies for recovering critical raw materials: Extracting trace elements from saltworks brines
<p><span>Rising population, industrialisation, and resource demand intensify resource limitations, particularly critical for European Union (EU) industries dependent on raw materials. Based on economic importance and supply risk, 32 Critical Raw Materials (CRMs) and two strategic raw materials were identified in 2023. With most CRMs sourced outside the EU, sea mining emerges as a promising secondary resource for CRMs extraction from seawater, although the harvest of Trace Elements (TEs) will require energy-intensive processes. Several EU-funded projects explore circular economy and resource recovery, considering sorption methods’ potential to extract TEs from brines. Commercial polymeric (IRC747, S940, MTX8010) and inorganic (SbTreat, SrTreat) sorbents, plus another synthesised inorganic one (CuHCF), were assessed for recovering TEs (cobalt, gallium, germanium, rubidium, strontium, caesium) from saltworks brines (bitterns). Polymeric sorbents, containing chelating functional groups, effectively targeted cobalt, gallium, and strontium, commercial inorganic sorbents favoured cobalt, gallium, germanium and strontium, and CuHCF targeted rubidium and caesium. Kinetic batch experiments demonstrated rapid element retention (≤30 min) by most sorbents. In dynamic column experiments, high sorption capacities were observed for cobalt and gallium with the polymeric sorbents, particularly for aminophosphonic sorbents (IRC747 and S940) (≥2.1 mg/g). SrTreat exhibited also a high sorption capacity of 7 mg/g for strontium, SbTreat achieved 20 mg/g for gallium and germanium and CuHCF retained rubidium (10 mg/g) and caesium (70 mg/g). Acidic desorption effectively recovered (>70 %) most of the elements from the sorbents, achieving concentration factors up to 708 for cobalt with IRC747 and S940, highlighting the potential valorisation of saltworks bitterns.</span></p>
Supplementary material 1 from: Guedes GHS, Salgado FLK, Uehara W, de Pavia Ferreira DL, Araújo FG (2020) The recapture of Leptopanchax opalescens (Aplocheiloidei: Rivulidae), a critically endangered seasonal killifish: habitat and aspects of population structure. Zoologia 37: 1-8. https://doi.org/10.3897/zoologia.37.e54982
Figure S1. Photographic records of Leptopanchax opalescens in an aquarium after three hours of capture (Photos 1–3), and record of a male specimen with more exuberant color immediately after capture in its natural habitat (Photos 4–5). Date: March 19th, 2020; Coordinates: 22°42.35'S, 43°41.59'W.
FIGURE 340 in Critical analysis of the type material of Mutillidae described from the Australasian Region (Hymenoptera)
FIGURE 340. Type localities (see Appendix A) for species of Sphaeropthalminae described from Australasia, by genus (note that Ephutomorpha is differentiated into sensu stricto and sensu lato, as in the checklist, Appendix B). Wallacea is delimited by Wallace's Line (1) and Lydekker's Line (2).
FIGURES 337–338 in Critical analysis of the type material of Mutillidae described from the Australasian Region (Hymenoptera)
FIGURES 337–338. Type specimens of Australasian Mutillidae described erroneously as Palaearctic. 337. Mutilla caucasica Radoszkowski, 1865, ♂, holotype: habitus dorsal view, labels. 338. Mutilla kuschakewitzi Radoszkowski, 1888, ♂, holotype: habitus dorsal view, habitus dorso-lateral view, dissected genitalia on card, habitus lateral view, labels. (Photos Katarzyna Vončina)
FIGURES 325–330 in Critical analysis of the type material of Mutillidae described from the Australasian Region (Hymenoptera)
FIGURES 325–330. Type specimens of Australasian Mutillidae. 325. Mutilla viridatis Smith, 1855, ♂, holotype: habitus dorsal view, labels. 326. Ephutomorpha viridiaenea André, 1903, ♀, holotype: habitus dorsal view, head dorsal view, habitus lateral view, labels. 327. Mutilla viridiaurea André, 1895, ♂, holotype: habitus dorsal view, habitus lateral view, labels. 328. Mutilla viridiceps André, 1895, ♂, holotype: habitus dorsal view, habitus lateral view, labels. 329. Ephutomorpha virulenta Turner, 1914, ♀, lectotype: habitus dorsal view, labels. 330. Ephutomorpha vittigera André, 1905, ♀, holotype: habitus dorsal view, labels.
FIGURES 319–324 in Critical analysis of the type material of Mutillidae described from the Australasian Region (Hymenoptera)
FIGURES 319–324. Type specimens of Australasian Mutillidae. 319. Ephutomorpha unilineata Turner, 1917, ♀, holotype: habitus dorsal view, metasoma dorsal view, labels. 320. Ephutomorpha exigua var. vagepunctata André, 1903, ♂, holotype: habitus dorsal view, habitus lateral view, labels. 321. Mutilla variabilis André, 1898, ♀, lectotype: habitus dorsal view, labels. 322. Mutilla varipes André, 1895, ♀, holotype: habitus dorsal view, labels. 323. Mutilla venusta Smith, 1855, ♀, lectotype: habi- tus dorsal view, labels. 324. Mutilla vicina Sichel & Radoszkowski, 1869, ♀, lectotype: habitus dorsal view, metasoma dorsal view (photos DJB), labels (photo Michael Ohl).
FIGURES 312–315 in Critical analysis of the type material of Mutillidae described from the Australasian Region (Hymenoptera)
FIGURES 312–315. Type specimens of Australasian Mutillidae. 312. Mutilla turneri André, 1895, ♀, holotype: habitus dorsal view, habitus lateral view, labels. 313. Eurymutilla turneri Lelej, 1983: 313a, ♀, holotype, habitus dorsal view, habitus lateral view, labels; 313b, ♂, paratype, habitus dorsal view, habitus lateral view, labels (photos ANIC). 314. Ephutomorpha tyla Hearn et al., 2019: 314a, ♀, holotype, habitus dorsal view, habitus lateral view; 314b, ♂, paratype, habitus dorsal view, habitus lateral view (photos University of Adelaide). 315. Mutilla umbrosa André, 1898, ♂, lectotype: habitus dorsal view, habitus lateral view, wings dorsal view, labels.
FIGURES 308–311 in Critical analysis of the type material of Mutillidae described from the Australasian Region (Hymenoptera)
FIGURES 308–311. Type specimens of Australasian Mutillidae. 308. Ephutomorpha sanguineiceps var. tristifica André, 1903, ♀, holotype: habitus dorsal view, labels. 309. Timulla orestes trobriandensis Krombein, 1971: 309a, ♂, holotype, habitus lateral view, labels; 309b, ♀, paratype, habitus dorsal view, habitus lateral view, labels. 310. Timulla oceanica tulagiensis Mickel, 1935: 310a, ♀, holotype, habitus dorsal view, habitus lateral view, labels; 310b, ♂, paratype, habitus dorsal view, labels. 311. Ephutomorpha tulagiensis Mickel, 1937, ♀, holotype: habitus dorsal view, metasoma dorsal view, labels.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.