Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
41
datasets available to search
ShareScore release 0.9.0
Dataset results
41 results for “Expedition 353”
IODP Expedition 353 Core composite images
A digital composite image (PNG) is made for each core comprising core sections scanned using a line-scan camera. The composite layout is equivalent to traditional core table photos. Top left is top of core; color and meter rule references are included.
IODP Expedition 353 Elemental analysis (CHNS)
Fundamental elemental component (total carbon, hydrogen, nitrogen, and sulfur) fluctuations help define the origin, depositional environment, and diagenetic alteration of source materials. To determine C, H, N, and S, solid samples are reacted with a catalyst, separated by chromatography, and detected by thermal conductivity on a FlashEA 1112 CHNS elemental analyzer. Organic carbon can be directly measured on the elemental analyzer by acidification of the sample to drive off carbonate as carbon dioxide before analyzing. Total organic carbon on this report is measured rather than calculated.
IODP Expedition 353 Core summary
Report includes detailed core data: drilling and coring depths, advancement, recovered core length measured on the catwalk and final curated length, core recovery, and sections cut.
IODP Expedition 353 Photomicrographs
Microscopic images of discrete samples were acquired using stereo and upright light microscopes and captured on digital cameras. Image files were uploaded along with a brief description and a record of the microscopic and lighting conditions when the image was taken.
IODP Expedition 353 Vane shear strength (AVS)
Shear strength was measured on section halves using a GEISA automated vane shear (AVS) frame and device controller. The device is suitable for sediment not affected by cementation (i.e., saturated, clay-rich, soft sediment). Shear strength measurements should be considered only approximate, particularly because the influence of pore pressure changes during the undrained experiment cannot be estimated. Report includes vane shear strength at the sample's failure point, maximum torque angle, penetration direction, and rate of vane rotation.
IODP Expedition 353 Visual core description
Descriptions of samples, generally at the section half and smear slide or thin section scale, were performed by shipboard scientists and recorded in the JRSO description software. Descriptive data for both macroscopic and microscopic examination were collected in a Microscoft Excel workbook by hole. A zip file of the entire expedition's observations is also available.
IODP Expedition 353 Interstitial water composite report
This composite report includes data from numerous interstitial water (IW) analyses (e.g., ICP-LIQUIDS and IONCHROM) in a variable set of columns. Each row combines the data from several tests (groups of measurements made on the same sample at the same time) for a particular IW sample. If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate analysis (ALKALINITY, ICP-LIQUIDS, IONCHROM, SALINITY, SPEC, TITRATOR, and potentially others). Major and minor elements were determined by inductively coupled plasma-atomic emission spectrocsopy (ICP-LIQUIDS). Cations and anions were measured by ion chromatography (IONCHROM). Complex ions were measured by colorimetric measurements using a UV-VIS spectrometer (SPEC). Alkalinity and chloride was measured by titration (ALKALINITY and TITRATOR). Dissolved carbon (DC), dissolved inorganic carbon (DIC), and dissolved organic carbon (DOC) were measured by combustion in a total organic carbon (TOC) analyzer. Salinity was measured by refractometer (SALINITY). pH was measured by ion-selective electrode as part of the alkalinity procedure and is reported in the ALKALINITY analysis.
IODP Expedition 353 Core orientation
Core orientation data were measured downhole during advanced piston corer (APC) coring, either by Minex FlexIT or Icefield MI-5 core orientation tool. These tools measure magnetic strength and orientation, 3-axis accelerometer data, and tool temperature data.
IODP Expedition 353 Laser height profile (section half)
Height profile data were measured on the Section Half Multisensor Logger (SHMSL) by a rangefinding laser and recorded in uncorrected height units in millimeters in CSV files.
IODP Expedition 353 P-wave velocity bayonet (section)
P-wave velocity data were measured on undisturbed section halves using pairs of piezoelectric transducers mounted in bayonets that are inserted into soft sediment along the JRSO-defined y-axis and/or z-axis. Report includes P-wave velocity in y and/or z direction, bayonet separation, traveltime between transducers, and first arrival picks.
IODP Expedition 353 P-wave velocity caliper (section)
P-wave velocity data were measured on undisturbed section halves (JRSO-defined x-axis) and/or discrete cube and cylinder samples (x, y, or z-axis) using pairs of piezoelectric transducers mounted on a caliper system. Report includes P-wave velocity in x, y, and/or z-direction, caliper separation, traveltime between transucers, and first arrival picks.
IODP Expedition 353 P-wave velocity logger (whole round)
P-wave velocity data were measured on whole-round sections on the Whole-Round Multisensor Logger (WRMSL) using pairs of piezoelectric transducers mounted on a caliper system. Measurements may be affected by degassing of pore fluid and microfracturing during core recovery. Report includes P-wave velocity in x-y plane and distance and traveltime between transducers.
IODP Expedition 353 Section-half images
Digital section images were taken of the flat face of split cores on the Section Half Imaging Logger (SHIL) using a linescan camera at a resolution of 20 lines/mm (50 micron pixels). Cores were imaged as soon as possible after splitting to minimize color changes that occur through oxidation and drying. The SHIL produces TIF files as well as reduced-size JPG files. The TIF files are not kept online but users may request them from the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a>.
IODP Expedition 353 RGB channels (calculated from core photos)
Red, green, and blue pixel data were extracted from Section Half Imaging Logger (SHIL) linescan images, typically binned at 0.5 cm resolution using the central 2 cm of the image.
IODP Expedition 353 Color reflectance
Color reflectance data were measured on section halves using an integration sphere and a UV-VIS spectrophotometer mounted on the Section Half Multisensor Logger (SHMSL). Spectral counts are recorded in the range of 380 to 700 nm, covering the visible spectrum, and binned in ~2 nm bins. Spectral data are reduced from spectra and recorded in tristimulus XYZ values, CieLAB L*a*b* values, and other units.
IODP Expedition 353 Sample report
Report includes detailed information about samples taken for testing: location/depth, type/form factor, test, request number, and database identifier.
IODP Expedition 353 Spectrophotometry
Interstitial water constitutents were measured by UV-VIS spectrometry using colorimetric methods (e.g., ammonium, nitrate, nitrite, phosphate, silica, and sulfide) by an Agilent CARY 100 UV-VIS spectrophotometer.
IODP Expedition 353 Magnetic remanence (SRM-discrete)
Raw data files for the magnetic remanence measurements of discrete and section-half samples on the superconducting rock magnetometer (SRM-DISC and SRM-SECT) are stored on by hole and by expedition, and are designated as discrete samples, section halves, or, rarely, whole-round sections.
IODP Expedition 353 Titration
Various chemical constituents (most commonly chloride) were measured by titration using either an autotitrator (chloride) or a manual titrator (other compounds). Chloride was measured by ion-selective electrode and a silver nitrate titration until all chloride is bound as silver chloride.
IODP Expedition 353 X-ray diffraction (XRD)
X-ray diffraction (XRD) is used to identify minerals and their proportions in sediment or hard rock sample powders on a Bruker AXS D4 Endeavor X-ray diffractometer. Results are returned as diffractograms in a viewable format (either PDF or PNG).
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.