Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
47
datasets available to search
ShareScore release 0.9.0
Dataset results
47 results for “Expedition 379”
IODP Expedition 379 Core composite images
A digital composite image (PNG) is made for each core comprising core sections scanned using a line-scan camera. The composite layout is equivalent to traditional core table photos. Top left is top of core; color and meter rule references are included.
IODP Expedition 379 Elemental analysis (CHNS)
Fundamental elemental component (total carbon, hydrogen, nitrogen, and sulfur) fluctuations help define the origin, depositional environment, and diagenetic alteration of source materials. To determine C, H, N, and S, solid samples are reacted with a catalyst, separated by chromatography, and detected by thermal conductivity on a FlashEA 1112 CHNS elemental analyzer. Organic carbon can be directly measured on the elemental analyzer by acidification of the sample to drive off carbonate as carbon dioxide before analyzing. Total organic carbon on this report is measured rather than calculated.
IODP Expedition 379 Carbonates composite report
This composite report includes data from two analyses (total carbon from Elemental analysis [CHNS], and inorganic carbon from [Coulometer]). Each row combines the CHNS and Coulometer data from measurements made on the same sample at the same time for a particular section and section offset (depth). If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate data type (Elemental analysis and Coulometer). If the same sample was measured multiple times by any of the methods, results in the report will be combined on one line where possible. Each additional replicate result will be shown in subsequent rows and will be combined where possible. Report includes results for carbon forms: total, inorganic, calcium carbonate, and organic by difference, along with total hydrogen, nitrogen, and sulfur.
IODP Expedition 379 Magnetic susceptibility (point or contact system)
Magnetic susceptibility was measured on section halves on the Section Half Multisensor Logger (SHMSL) using a Bartington MS2 meter and either a MS2E or MS2K probe. Because all JRSO cores meet minimum size requirements for these two probes, MSPOINT data are corrected for volume and recorded in SI susceptibility units (x10<sup>-5</sup>).
IODP Expedition 379 Natural gamma radiation
Natural gamma radiation (NGR) data in the ~0.1 to 3.0 MeV range were measured using eight custom-designed sodium iodide (thallium) [NaI(Tl)] detectors arranged along the core measurement axis at 20 cm intervals. The NGR system uses layers of passive shielding (lead) and active shielding (plastic scintillators and coincidence electronics) to reduce the cosmic-ray signal for low-count analysis of sediment core sections and to obtain the maximum signal-to-noise ratio. Data are reported on a total counts per second basis and the raw spectral files are available as compressed files for later analysis.
IODP Expedition 379 Ion chromatography
Cation and anion concentration in interstitial water samples was measured by ion chromatography using a conductivity detector. Cation analytes include calcium, magnesium, potassium, and sodium. Anion analytes include chloride, sulfate, and bromide.
IODP Expedition 379 Photomicrographs
Microscopic images of discrete samples were acquired using stereo and upright light microscopes and captured on digital cameras. Image files were uploaded along with a brief description and a record of the microscopic and lighting conditions when the image was taken.
IODP Expedition 379 Magnetic susceptibility (whole round)
Magnetic susceptibility was measured on whole-round sections (and rarely section halves) on the Whole-Round Multisensor Logger (WRMSL) and/or Special Task Multisensor Logger (STMSL) using a Bartington MS2 meter and a 90 mm or 80 mm MS2C loop. As volume of the sample is not controlled for this experiment, susceptibility units are recorded in instrument units and are not volume-corrected.
IODP Expedition 379 Core orientation
Core orientation data were measured downhole during advanced piston corer (APC) coring, either by Minex FlexIT or Icefield MI-5 core orientation tool. These tools measure magnetic strength and orientation, 3-axis accelerometer data, and tool temperature data.
IODP Expedition 379 Magnetic susceptibility (Kappabridge)
Bulk magnetic susceptibility and anisotropy of magnetic susceptibility (AMS) were measured on discrete samples using an Agico KLY-4 Kappabridge susceptibility meter. Report includes individual and average principal susceptibilities, inclination and declination of principal susceptibilities, and volume-corrected bulk susceptibility.
IODP Expedition 379 Section-half images
Digital section images were taken of the flat face of split cores on the Section Half Imaging Logger (SHIL) using a linescan camera at a resolution of 20 lines/mm (50 micron pixels). Cores were imaged as soon as possible after splitting to minimize color changes that occur through oxidation and drying. The SHIL produces TIF files as well as reduced-size JPG files. The TIF files are not kept online but users may request them from the <a href="mailto:database@iodp.tamu.edu">IODP-JRSO Data Librarian</a>.
IODP Expedition 379 Moisture and Density
Moisture and density (MAD) data were acquired on ~10 mL sediment or rock samples by measuring three out of four material parameters: wet (saturated) mass, wet volume, dry mass, and/or dry volume after 24 h drying in a convection oven at 105 degrees C. From the moisture and volume measurements, the following phase relationships are calculated: wet and dry water content, wet bulk density, dry bulk density, grain density, porosity, and void ratio. The combination of measurements is defined by the submethod chosen: A, B, C, or D. Wet (A, B, or C) and dry (A, B, C, or D) mass is determined using motion-compensated balances. Wet volume is determined either by helium pycnometry (A) or by the sample's geometric dimensions using calipers (A or D). Dry volume (C or D) is measured by helium pycnometry. Submethods A and B are not recommended by IODP. Submethod C is suitable for saturated materials such as fine-grained sediments. Submethod D is suitable for unsaturated porous material such as certain limestones and basalts.
IODP Expedition 379 ICP-AES elemental analysis (interstitial water)
Elemental concentration in interstitial water samples was measured by inductively coupled plasma - atomic emission spectroscopy (ICP-AES). Data are presented by element-wavelength pair (e.g., more than one calcium line may be reported). Elemental lines for which data do not exist for a particular expedition will not appear.
IODP Expedition 379 Core summary
Report includes detailed core data: drilling and coring depths, advancement, recovered core length measured on the catwalk and final curated length, core recovery, and sections cut.
IODP Expedition 379 Formation temperature
Formation temperature was measured by the advanced piston corer temperature tool (APCT-3), Sediment Temperature Tool (SET), or sediment temperature pressure tool (SETP) and reduced to in situ temperature and (for SETP) pressure estimates. These data are compiled per instrument run and assigned to a core (the core cut with the APCT-3 cutting shoe or the core following the SET deployment).
IODP Expedition 379 Inorganic carbon (coulometer)
Inorganic carbon (carbonate) is determined by coulometry, which uses a photodetection cell to measure carbon dioxide evolved during sample acidification. Report includes percent inorganic carbon and calcium carbonate.
IODP Expedition 379 Interstitial water composite report
This composite report includes data from numerous interstitial water (IW) analyses (e.g., ICP-LIQUIDS and IONCHROM) in a variable set of columns. Each row combines the data from several tests (groups of measurements made on the same sample at the same time) for a particular IW sample. If data do not exist for a particular expedition, the column does not appear. To identify individual samples and tests, see each separate analysis (ALKALINITY, ICP-LIQUIDS, IONCHROM, SALINITY, SPEC, TITRATOR, and potentially others). Major and minor elements were determined by inductively coupled plasma-atomic emission spectrocsopy (ICP-LIQUIDS). Cations and anions were measured by ion chromatography (IONCHROM). Complex ions were measured by colorimetric measurements using a UV-VIS spectrometer (SPEC). Alkalinity and chloride was measured by titration (ALKALINITY and TITRATOR). Dissolved carbon (DC), dissolved inorganic carbon (DIC), and dissolved organic carbon (DOC) were measured by combustion in a total organic carbon (TOC) analyzer. Salinity was measured by refractometer (SALINITY). pH was measured by ion-selective electrode as part of the alkalinity procedure and is reported in the ALKALINITY analysis.
IODP Expedition 379 Closeup images
Close-up images taken by digital cameras as requested by the science party, typically when the section-half image is not sufficient. Close-up photographs of the areas of interest may be taken from whole-round sections, pieces, or section halves in sediments and rock.
IODP Expedition 379 Alkalinity and pH
Alkalinity was determined by Gran titration with an autotitrator (Metrohm 794 basic Titrino) using 0.1 M HCl at 20 degrees C. Report includes alkalinity, correction factor (if applicable), and pH.
IODP Expedition 379 Visual core description
Descriptions of samples, generally at the section half and smear slide or thin section scale, were performed by shipboard scientists and recorded in the JRSO description software. Descriptive data for both macroscopic and microscopic examination were collected in a Microscoft Excel workbook by hole. A zip file of the entire expedition's observations is also available.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.