Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
18
datasets available to search
ShareScore release 0.9.0
Dataset results
18 results for “GNSS receiver”
GNSS troposphere products from a network of low-cost GNSS receivers, Wroclaw, Poland, March-April 2021
<p>This dataset contains multi-GNSS troposphere products, i.e. ECEF coordinates, zenith total delay (ZTD), and horizontal gradients, together with their uncertainties. These products were obtained using 3 processing strategies:</p> <p>1) real-time (for details see https://link.springer.com/article/10.1007/s10291-020-01014-w, under to "advanced strategy" configuration, with the exception that only GPS and Galileo observations were considered);</p> <p>2) near real-time (NRT, for details see http://egvap.dmi.dk/);</p> <p>3) final (using CSRS online service, https://webapp.geod.nrcan.gc.ca/geod/tools-outils/ppp.php).</p> <p>Products are stored as standard Matlab MAT files. Each file contains a set of table arrays (Matlab format). Each table array contains the selected set of estimated parameters for a single station. Table columns are labeled and self-explanatory. A comma-delimited text file can be obtained using the in-build Matlab function "writetable.m".</p> <p>For convenience, the same information is stored in alternative data formats:</p> <p>1) for NRT and Final products: troposphere SINEX v1 (TRO / TRP)</p> <p>2) for real-time products: semicolon-delimited text files, with a self-explanatory header line; each file contains daily products for one station.</p>
RINEX files from low-cost GNSS receivers in Wrocław, Poland; January - March, 2021
<p>Daily RINEX files with multi-GNSS (GPS, GLONASS, Galileo) observations at 30 sec. interval obtained with low-cost GNSS receiver u-blox ZED-F9P and u-blox patch antennas (except BX02 - ArduSimple survey antenna). Time period (depending on stations): 27.02.2021 - 28.03.2021.</p>
RINEX files from low-cost GNSS receivers equipped with few types of low-cost and high-end antennas, Wrocław, Poland; July, 2022
<p>Daily RINEX files with multi-GNSS (GPS, GLONASS, Galileo) observations at 30 sec. interval obtained with low-cost GNSS receiver u-blox ZED-F9P and few types of low-cost and high-end antennas. Time period: 05.07.2022 - 18.07.2022.</p>
Strong-motion seismogeodesy by deeply coupling GNSS receivers and inertial measurement units
<p>Understanding the origin and mechanism of destructive earthquakes is predicated on the faithful recordings of their induced ground displacements near the clearly deformed epicentral regions. Global Navigation Satellite System (GNSS) receivers, such as the GPS sort, have been recognized as the best, if not the only reliable, tool to measure such large displacements. This is achieved within the GNSS receivers by continuously tracking the satellite carrier-phase signals. However, GNSS receivers are likely to lose their fidelity in recording the complete and accurate displacement waveforms in case of fierce ground motions, since their carrier-phase tracking becomes instable when strained by such persistent and high dynamic stress. We hence developed an advanced GNSS receiver architecture where the dynamic stress suffered by the carrier-phase tracking components is compensated for by an embedded inertial measurement unit consisting of one accelerometer and one gyroscope. In this case, the carrier-phase signals can be tracked steadily by GNSS receivers, and the displacement accuracy can be improved from sub-centimeter to millimeter level by about 70% when the ground accelerations reach twice the gravitational acceleration. We believe that this advanced GNSS receiver will be an excellent strong-motion seismometer recording displacements directly at a few millimeter accuracy without missing any earthquake signals, even in case of fierce ground motions.</p>
Performance of 6 Different GNSS Receivers at Low Latitude under Moderate and Strong Scintillation
<p>These data sets contain ionospheric scintillation (GPS L1) observations (S<sub>4</sub> and <span class="math-tex">\(\mathbf{\sigma_\phi}\)</span> indexes) from 5 different GNSS receivers.</p> <p>The data are from two nights, 20/21 February and 27/28 November of 2013, and stored in different files. The files are in the HDF5 format using zlib compression and were generated by a Python script using the Pandas library.</p> <p>Each file contain the following folders:</p> <ul> <li> <p>/csm_maker_calc</p> </li> <li> <p>/csm_own_calc</p> </li> <li> <p>/csm_raw</p> </li> <li> <p>/gpstation6_maker_calc</p> </li> <li> <p>/gpstation6_own_calc</p> </li> <li> <p>/gpstation6_raw</p> </li> <li> <p>/gsv_4004b_lisn_calc</p> </li> <li> <p>/gsv_4004b_maker_calc</p> </li> <li> <p>/septentrio_maker_calc</p> </li> <li> <p>/septentrio_own_calc</p> </li> <li> <p>/septentrio_raw</p> </li> <li> <p>/su_iono_sdr_own_calc</p> </li> <li> <p>/su_iono_sdr_raw</p> </li> </ul> <p>The suffix <strong>maker_calc</strong> means that the indices were calculated in real time or post-processed using receiver manufacturer's tools. The suffix <strong>own_calc</strong> means that the indices were calculated using our own methodology. The suffix <strong>raw</strong> corresponds to the raw data (power and phase cycles). And finally the suffix <strong>lisn_calc</strong> corresponds to the S<sub>4</sub> index obtained from the LISN network website.</p>
Comparative analysis of positioning accuracy of Garmin Forerunner wearable GNSS receivers in dynamic testing
<p>Required dataset for the manuscript.</p>
GPS 50 Hz data set for the case study entitled "Comparison of TEC calculations based on Trimble, Javad, Leica and Septentrio GNSS receiver data". Part 1
<p>This dataset contains 50 Hz GPS data to explore JAVAD and Leica receivers quality to reconstruct slant TEC.</p> <p>GNSS receiver is to some extent a “black box” when its data is used for ionospheric studies. The results based on Javad, Septentrio, Trimble and Leica GNSS receivers (which is placed in this data set) proved that the accuracy of the slant Total Electron Content (TEC) calculation can differ significantly if data used for its calculation is from different GNSS receiver make/type. This is because TEC measurements depend on the carrier phase tracking technique applied in a receiver. Based on this data it was found that:</p> <p>1) Correlation coefficient between carrier phase noises in L1 and L2 channel outputs may be considered as an indicator showing whether the L1-aided tracking technique or independent tracking is applied.</p> <p>2) The empirical model of TEC noise component was provided to determine TEC noise value in GNSS receivers of different make/type.</p>
Data from: How a GNSS receiver is held may affect static horizontal position accuracy
The static horizontal position accuracy of a mapping-grade GNSS receiver was tested in two forest types over two seasons, and subsequently was tested in one forest type against open sky conditions in the winter season. The main objective was to determine whether the holding position during data collection would result in significantly different static horizontal position accuracy. Additionally, we wanted to determine whether the time of year (season), forest type, or environmental variables had an influence on accuracy. In general, the F4Devices Flint GNSS receiver was found to have mean static horizontal position accuracy levels within the ranges typically expected for this general type of receiver (3 to 5 m) when differential correction was not employed. When used under forest cover, in some cases the GNSS receiver provided a higher level of static horizontal position accuracy when held vertically, as opposed to held at an angle or horizontally (the more natural positions), perhaps due to the orientation of the antenna within the receiver, or in part due to multipath or the inability to use certain satellite signals. Therefore, due to the fact that numerous variables may affect static horizontal position accuracy, we only conclude that there is weak to moderate evidence that the results of holding position are significant. Statistical test results also suggest that the season of data collection had no significant effect on static horizontal position accuracy, and results suggest that atmospheric variables had weak correlation with horizontal position accuracy. Forest type was found to have a significant effect on static horizontal position accuracy in one aspect of one test, yet otherwise there was little evidence that forest type affected horizontal position accuracy. Since the holding position was found in some cases to be significant with regard to the static horizontal position accuracy of positions collected in forests, it may be beneficial to have an understanding of antenna positioning within the receiver to achieve the greatest accuracy during data collection.
RINEX files from low-cost and geodetic-grade GNSS receivers, Wrocław, Poland; Sofia, Bulgaria; March-April, 2024 with Galileo HAS files
<p>Daily RINEX files with multi-GNSS (GPS, GLONASS, Galileo,BeiDou) observations at 30 sec. interval obtained with two low-cost GNSS receiver u-blox ZED-F9P in Wrocław, Poland (PL01), Sofia, Bulgaria (BG01) and two geodetic-grade receivers in Wrocław, Poland (WROC) and Sofia, Bulgaria (SUZF). Time period: 29.03.2024 - 24.04.2024. Galileo HAS files are also shared.</p>
Data from: How a GNSS receiver is held may affect static horizontal position accuracy
Open the record for dataset details and reuse information.
Testing GNSS receiver accuracy in Samsung Galaxy series mobile phones at a sports stadium
<p>Required dataset for the open acces manuscript. </p>
Database of ionospheric rate of TEC change index (ROTI) map derived from Indonesian GNSS receiver network
<blockquote> <p><strong>USERS CAN ALSO ACCESS THE ROTI MAPS IN THIS DATABASE LINK:</strong></p> <p><strong>https://gatotkaca.brin.go.id/petaionosfer/</strong></p> </blockquote> <p> </p> <p><strong>Introduction</strong></p> <p>Indonesia, located near the magnetic equator in Southeast and East Asia, is essential for studying ionospheric phenomena, particularly equatorial plasma bubbles (EPBs). The Indonesian Geospatial Information Agency (BIG) has deployed a network of Global Navigation Satellite System (GNSS) receivers as part of the Indonesia Continuously Operating Reference Stations (Ina-CORS) across this country. This network has enabled the creation of detailed ionospheric irregularities maps based on the Rate of Total Electron Content (TEC) Change Index (ROTI). These maps are crucial for understanding EPBs in Southeast and East Asia.</p> <p><strong>GNSS network and ROTI map generation</strong></p> <p>The Ina-CORS consists of over 300 GNSS receivers strategically placed across Indonesia (see attached figure "geographic map_receivers.jpg"), spanning from 95°E to 140°E and from 5°N to 10°S. These receivers continuously gather GNSS observable data with a time resolution of 30 seconds in a Receiver Independent Exchange (RINEX) file. This data is then processed to generate the ROTI maps from the magnetic equator to the southern low-latitude region in Southeast/East Asia.</p> <p>The GNSS data in the RINEX file is processed to calculate the Total Electron Content (TEC) using the open software developed by Seemala (2023). The software can be found at https://seemala.blogspot.com/2020/12/gps-tec-program-version-3-for-rinex-3.html. ROTI is derived by measuring the standard deviation of the rate of change of TEC over a 5-minute interval (Pi et al., 1997). This index is a critical indicator of ionospheric irregularities with kilometers of spatial scales inside the EPBs.<br>Using ROTI data plotted at the Ionospheric Pierce Point (IPP) altitude of 350 km, 2-dimensional (2D) latitude-longitude ROTI maps are generated. The grid size of the ROTI map is 0.25° × 0.25°. The ROTI map is smoothed by a boxcar average of 5 × 5 grid data regarding geographic latitude and longitude. In the map, sunset and sunrise terminators at altitudes of 110 km (red curve), 350 km (green curve), and 650 km (black curve) are plotted. The ROTI map is generated at each interval of 10 minutes from 9:00 to 23:50 UT. The name file of the zipped map in one day indicates the year and day of the year. For example, s_2024122_map.rar indicates the maps on day 122 in 2024.</p> <p><strong>Purpose</strong></p> <p>Sharing GNSS data in RINEX files from the CORS could be strictly limited. Sharing the ROTI map derived from the CORS of Southeast Asian countries can be an alternative solution. This database aims to store the ROTI maps over Indonesia derived from GNSS data of the Ina-CORS network. The ROTI map database is also freely accessible and can be used for educational and scientific purposes. It is an academic/scientific resource and promotes a deeper understanding of EPB phenomena and their impact on navigation and communication systems. This database enables continuous monitoring and analysis of ionospheric conditions, particularly EPB occurrence. The database supports scientific research, enhances GNSS applications, and contributes to space weather forecasting by providing a high-resolution ROTI map. This ROTI map database has been developed to encourage research collaboration between researchers globally and in Indonesia.</p> <p><strong>Attribution</strong></p> <p>Users must appropriately credit the data source in this database in any publications, presentations, or products derived from it. When using the ROTI maps in this database, please cite the database. The users acknowledge the Indonesian Geospatial Information Agency (Badan Informasi Geospasial, BIG) for providing the GNSS data to make the ROTI map. Users are also encouraged to collaborate with ionospheric researchers in Indonesia.</p> <p><strong>References</strong></p> <p>Gopi K. Seemala (2023), Chapter 4 - Estimation of ionospheric total electron content (TEC) from GNSS observations, Editor(s): A.K. Singh, S. Tiwari, In Earth Observation, Atmospheric Remote Sensing, Elsevier, 2023, Pages 63 - 84, doi.org/10.1016/B978-0-323-99262-6.00022-5.</p> <p>Pi, X., Mannucci, A. J., Lindqwister, U. J., and Ho, C. M. (1997), Monitoring of global ionospheric irregularities using the worldwide GPS network, Geophys. Res. Lett., 24, 2283–2286.</p> <p> </p> <p><strong>More Information</strong><br>Feel free to reach out via email for more information. Your feedback is invaluable to us, and we encourage users to share their experiences and suggestions for research ideas and further improvements.<br>Correspondence: P. Abadi, Dr.; Researcher at Research Center for Climate and Atmosphere, BRIN; email: pray001[at]brin.go.id (replace "[at]" with "@").</p> <p> </p> <p> </p>
Global Navigation Satellite System (GNSS) IGS Final Combined Satellite and Receiver Clock Product (30 second resolution, daily files, generated weekly) from NASA CDDIS
This derived product set consists of Global Navigation Satellite System Final Satellite and Receiver Clock Product (30-second granularity, daily files, generated weekly) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS final combined satellite and receiver clock products. The final products are considered the most consistent and highest quality IGS solutions; they consist of daily orbit files, generated on a weekly basis with a delay up to 13 (for the last day of the week) to 20 (for the first day of the week) days. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
Ground-Based Meteorological Data (daily, 24 hour files) from Co-Located Global Navigation Satellite System (GNSS) Receivers from NASA CDDIS
This dataset consists of ground-based Meteorological Data (daily, 24 hour files) from instruments co-located with Global Navigation Satellite System (GNSS) receivers from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The daily meteorological data files contain one day of meteorological data (temperature, pressure, humidity, etc.) in RINEX format from a global permanent network of ground-based receivers, one file per site. More information about these data is available on the CDDIS website at https://cddis.nasa.gov/Data_and_Derived_Products/GNSS/daily_30second_data.html.
Ground-Based Global Navigation Satellite System (GNSS) Meteorological Data (30-second sampling, hourly files) from Co-Located Receivers from NASA CDDIS
This dataset consists of ground-based Meteorological Data (hourly, 24 hour files) from instruments co-located with Global Navigation Satellite System (GNSS) receivers from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The hourly meteorological data files contain one day of meteorological data (temperature, pressure, humidity, etc.) in RINEX format from a global permanent network of ground-based receivers, one file per site. More information about these data is available on the CDDIS website at https://cddis.nasa.gov/Data_and_Derived_Products/GNSS/hourly_30second_data.html.
Global Navigation Satellite System (GNSS) IGS Final Combined Satellite and Receiver Clock Solution (5 minute resolution, daily files, generated weekly) product from NASA CDDIS
This derived product set consists of Global Navigation Satellite System Final Satellite and Receiver Clock Product (5-minute granularity, daily files, generated weekly) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS final combined satellite and receiver clock products. The final products are considered the most consistent and highest quality IGS solutions; they consist of daily orbit files, generated on a weekly basis with a delay up to 13 (for the last day of the week) to 20 (for the first day of the week) days. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.
Global Navigation Satellite System (GNSS) IGS Rapid Combined Satellite and Receiver 5-Minute Clock Solution (30-second resolution, daily files, generated daily) Product from NASA CDDIS
This derived product set consists of Global Navigation Satellite System Rapid Satellite and Receiver Clock Product (30-second granularity, daily files, generated daily) from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. Analysis Centers (ACs) of the International GNSS Service (IGS) retrieve GNSS data on regular schedules to produce GNSS satellite and ground receiver clock values. The IGS Analysis Center Coordinator (ACC) uses these individual AC solutions to generate the official IGS rapid combined satellite and receiver clock products. The rapid combination is a daily solution available approximately 17 hours after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC. For most applications the user of IGS products will not notice any significant differences between results obtained using the IGS Final and the IGS Rapid products.
Ground-Based Global Navigation Satellite System (GNSS) High-Rate Meteorological Data (sub-hourly files) from Co-Located Receivers from NASA CDDIS
This dataset consists of ground-based Meteorological Data (sub-hourly files) from instruments co-located with Global Navigation Satellite System (GNSS) receivers from the NASA Crustal Dynamics Data Information System (CDDIS). GNSS provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The sub-hourly meteorological data files contain 15 minutes of meteorological data (temperature, pressure, humidity, etc.) in RINEX format from a global permanent network of ground-based receivers, one file per 15 minutes per site. More information about these data is available on the CDDIS website at https://cddis.nasa.gov/Data_and_Derived_Products/GNSS/high-rate_data.html.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.