Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
5
datasets available to search
ShareScore release 0.9.0
Dataset results
5 results for “Laser-Induced Breakdown Spectroscopy”
Data for: Raman microspectroscopy and laser-induced breakdown spectroscopy for the analysis of polyethylene microplastics in human soft tissues
<p>Data from Raman microspectrometry, LIBS, XRF, and particle sizer analysis supports the findings in the published article named Raman microspectroscopy and laser-induced breakdown spectroscopy to analyze polyethylene microplastics in human soft tissues. The aim of this research is to present the optimized protocol for the detection and analysis of microplastics in biological samples.</p> <p><strong> </strong></p> <p>The tonsil tissue is used for this experiment, and the workflow consists of a few steps: 1. digestion, 2. filtration, 3. analysis. </p> <p>The presented dataset includes the data for verifying the validity of this proposed protocol and the data from clinical experiments done on tonsils where the protocol is applied. We are focusing only on PE microplastics as they are one of the most frequent plastic types in the environment. </p> <p>Firstly, the data from the particle sizer show the size distribution before and after KOH treatment, which is necessary for digestion. We are testing if the particles are not affected by the KOH solution. The data are listed in an Excel sheet where the individual detected PE particle size [µm] and their frequencies [%] are annotated. The data are separated into 2 tables in one sheet - 1st represents data collected before KOH and the 2nd after KOH treatment. </p> <p>To test the limits of our selected systems for microplastic detection, we included the data from Raman and LIBS under the file ‘limitations.’ The different sizes of PE particles, from tens to 1 µm, were analyzed, and the spectra can be retrieved in the folders. The signal intensity can be observed to see the detection limits. For the Raman analysis, the particles were located on the filter. For LIBS, the particles were embedded in epoxy to enable the detection of PE particles in tens of microns. The Raman data are in .txt files and can be opened in any adequate software (Matlab, R, Python, etc.). LIBS data are in specific .libsdata format, which can be opened by LibsAnalyzer software by Lightigo. </p> <p><strong> </strong></p> <p>The clinical experiment was done on tonsil tissue. The tissue was disgusted and filtered. Then, the filters were analyzed. The dataset presents two sample groups: 1. control-native tissue and 2. test-spiked tissue with PE particles. The data from Raman analysis include both, with the aim to confirm the presence of PE particles in the test sample and to exclude the contamination in the control sample. The spectra are again in .txt files. In the case of control, spectra from unclassified particles are presented. For these reasons, the LIBS and XRF were run to exclude the possibility of the presence of polymeric material on the filter of the control sample. The analyzed chemical elements by LIBS for both samples are in the ASC file. Furthermore, individual PE particles were also analyzed on LIBS to obtain reference results for test samples with added PE microplastics. In the case of XRF, data from the empty filter, control, and test samples are included, each in a .txt file. Individual detected chemical elements and their intensities can be retrieved in the tables. </p> <p> </p>
Analysis of heritage stones and model wall paintings by pulsed laser excitation of Raman, laser-induced fluorescence and laser-induced breakdown spectroscopy signals with a hybrid system
<p>Analysis of heritage stone samples, alabaster, gypsum, limestone and marble, and model wall paintings was carried out with a laboratory, hybrid system based on the pulsed laser excitation of Raman, laser-induced fluorescence and laser-induced breakdown spectroscopy signals. The system is based on a nanosecond Q-switched Nd:YAG laser operating at its second (532 nm), third (355 nm) and fourth (266 nm) harmonics and a spectrograph coupled to a time-gated intensified charge coupled device for spectral analysis allowing detection with temporal resolution. For the stone samples, Raman spectra display the characteristic vibration modes of SO<sub>4</sub><sup>2-</sup> of calcium sulfate, in alabaster and gypsum, and of free CO<sub>3</sub><sup>2- </sup>of calcium carbonate, in limestone and marble. Simultaneously acquired laser-induced fluorescence spectra reveal characteristic bands that help to distinguish between heritage stone types. The elemental composition of stone samples is obtained by laser-induced breakdown spectroscopy upon excitation at 355 nm. Spectra of all stone samples reveal their elemental composition that includes Ca, Na, Mn and Sr and the presence of molecular species, such as CN, C<sub>2</sub> and CaO. Additional emission lines, ascribed to Mg, Si, Al and K, appear with different intensities according to the nature of the stone material. Model wall paintings, based on a red pigment, prepared as fresco or mixed with two different binders, were also studied. The complementary information provided by the three spectroscopic modes allows the identification of the pigment as red vermillion and of the different preparations based on the pigment alone or in mixtures with linseed oil and egg yolk binders.</p>
Analysis of heritage stones and model wall paintings by pulsed laser excitation of Raman, laser-induced fluorescence and laser-induced breakdown spectroscopy signals with a hybrid system
<p>Laser based analysis of artworks benefits from the development of hybrid instruments where a single laser source serves to excite fluorescence, Raman and laser induced breakdown spectroscopy (LIBS) signals. Laser induced fluorescence (LIF) and Raman spectra provide information at the molecular level, while LIBS serves for identifying the elemental composition of the substrate under consideration. Studies using several excitation wavelengths on different types of materials and substrates help to develop and establish these hybrid systems for the conservation of artworks.</p>
Multi-elemental Imaging of Lung Tissues With LIBS (Laser-induced Breakdown Spectroscopy)
ClinicalTrials.gov study NCT03901196. IPD Sharing: NO. Countries: 1. Publications: 1.
Chlorine Determination in Cement Paste Samples Using Laser-Induced Breakdown Spectroscopy and Non-Matching Matrix Calibration Samples – JAAS – Dataset
<p>The dataset provided contains measurements for an article in The Journal of Analytical Atomic Spectrometry (JAAS).</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.