Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
9
datasets available to search
ShareScore release 0.9.0
Dataset results
9 results for “Material fatigue”
Data on the material characterization of cast and additively manufactured IN939 subjected to room-temperature low-cycle fatigue load
<p>The original data to the research paper termed "Room-temperature low-cycle fatigue behaviour of cast and additively manufactured IN939 superalloy" are enclosed. Two specimen orientations of L-PBF IN939 - horizontal and vertical, and two thermodynamical states - without subsequent heat treatment (non-treated) and standard aged according to Delargy et al., 1986, were investigated. The paper concerns the low-cycle fatigue performance of cast and additively manufactured IN939 superalloy. It brings a comprehensive account on the damage and deformation behaviour of the tested alloy, combining the test analyses with high-resolution SEM and TEM observations.</p>
Observations of microscale tensile fatigue damage mechanisms of composite materials for wind turbine blades
<p>A scout and zoom dataset including video-versions of the figures behind the following paper to where the references should be given:</p> <p>Mikkelsen, L.P. Observations of microscale tensile fatigue damage mechanisms of composite materials for wind turbine blades, IOP Conf. Series: Materials Science and Engineering <strong>380</strong> (2018) 012006 , http://iopscience.iop.org/article/10.1088/1757-899X/388/1/012006.</p> <p>The SFoV data-set is saved as both a 3D and a 2D (zipped) tiff stack.</p>
Supplemental Material to Doctoral Thesis "Engineering approach for predicting tunneling crack initiation in trailing-edge adhesive joints of wind turbine blades under mechanical fatigue and thermal residual stresses"
<p>This set supplements the figure data to the doctoral thesis "Engineering approach for predicting tunneling crack initiation in trailing-edge adhesive joints of wind turbine blades under mechanical fatigue and thermal residual stresses", DOI: <a href="https://doi.org/10.14279/depositonce-19144">10.14279/depositonce-19144</a></p>
Supplemental Material to Journal Article "Probabilistic Approach for the Fatigue Strength Prediction of Polymers"
<p>This set supplements the figure and table data to the article "Probabilistic Approach for the Fatigue Strength Prediction of Polymers", DOI: <a href="https://doi.org/10.2514/1.J060444">https://doi.org/10.2514/1.J060444</a></p> <p>The Python code to reproduce the results shown in the article is released as v1.0 of the MAMO toolbox for material models DOI:</p> <p>The latest code development can be cloned at <a href="https://github.com/mrosemeier/mamo">https://github.com/mrosemeier/mamo</a>.</p> <p> </p>
Supplemental Material to Article "Quantification of process-induced effects on fatigue life of short-glass-fiber-filled adhesive used in wind turbine rotor blades"
<p>This set supplements the figure data to the article "Quantification of process-induced effects on fatigue life of short-glass-fiber-filled adhesive used in wind turbine rotor blades", DOI: xxx</p>
Internal large field of view observations with optical microscope of fatigue damage in composite materials during bending loading
<p>Stitched microscope pictures ...</p> <p>References to this data-set should include a reference to one of the following two papers in where the data has been used.</p> <p>Mortensen U., Andersen, T.L., Mikkelsen, L.P., Observation of Edge Effect in Flexural Fatigue Test of Composites using Large Field of View Microscopy, Journal of Composite Materials. https://doi.org/10.1177/0021998320902233, 2020</p> <p>Mortensen, U.A., Mikkelsen, L.P., Andersen, T.L. Observation of the interaction between transverse cracking and fibre breaks in uni-directional non-crimp fabric composites subjected to cyclic bending fatigue damage mechanism, submitted, Feb. 2022.</p> <p>The naming of the pictures are build up by the follwing elements</p> <p>EL_05 is the plate ID,<br> J01-J09 is the sample ID where the following load level are defined:</p> <ul> <li>J01: 1 000 cycles</li> <li>J02: 2 500 cycles</li> <li>J03: 5 000 cycles</li> <li>J04: 10 000 cycles</li> <li>J05: 50 000 cycles</li> <li>J06: 100 000 cycles</li> <li>J07: 250 000 cycles</li> <li>J08: 500 000 cycles</li> <li>J09: 1 000 000 cycles</li> </ul> <p>S01-04: is the 4 surfaces inside the sample as shown in the picture saved in: xxx. The picture show the sample where the red planes indicate the polished surfaces where the microscopy pictures from the internal surfaces are taken.</p> <p>The pictures are oriented with the compression side upward and the tensile side downward similar to the orientation of the actual 4-point fatigue bending test sample.</p>
Effects of hot-wet storage aging, CNT-integration and damping layer interposition on static and fatigue interlaminar shear response of a UD Graphite/Epoxy material system
<p>The present work aims at experimental quantification of the effect of hot-wet storage aging on the static and<br> fatigue interlaminar shear response of three UD Graphite-Epoxy based material systems: a control laminate, a<br> CNT-treated laminate and a lamination including an embedded damping veil. In this context, specimens have<br> been fabricated and tested for determination of the interlaminar shear strength (ILSS) according to the relevant<br> ASTM standard, and the effects of the above mentioned constituents on the response of non-aged (RT) and aged<br> (HW) specimens have been investigated. The experimental data, presented in batch mode, indicated that aging<br> leads to severe degradation of the interlaminar shear strength and relevant fatigue endurance of all material<br> systems, whereas the CNT-treated laminate appeared to be the most sensitive configuration. In the case of nonaged specimens, CNT-treatment led to larger failure strains and a clear bilinear response, while all three material<br> systems exhibited similar values of interlaminar shear strength.</p>
Supplemental Material to Journal Article "Impact of Site-Specific Thermal Residual Stress on the Fatigue of Wind-Turbine Blades"
<p>This set supplements the figure data to the article "Impact of Site-Specific Thermal Residual Stress on the Fatigue of Wind-Turbine Blades", DOI: <a href="https://doi.org/10.2514/1.J059388">10.2514/1.J059388</a>.</p>
Edge based large field of view observations with optical microscope of fatigue damage in composite materials during bending loading
<p>Stitched microscope pictures ...</p> <p>References to this data-set should include a reference to the following paper in where the data has been used.</p> <p>[1] Mortensen U., Andersen, T.L., Mikkelsen, L.P., Observation of Edge Effect in Flexural Fatigue Test of Composites using Large Field of View Microscopy, <em>Journal of Composite Materials.</em> <a href="https://doi.org/10.1177/0021998320902233">https://doi.org/10.1177/0021998320902233</a>, 2020</p> <p>The naming of the files is given in the following structure EI_05_A03_kxxx_stitch.tif where</p> <p>EI_05_A03 is the sample ID<br> kxxx indicate after how many cycles the stitched microscopy picture are taken where e.g.</p> <ul> <li>k000 is the initial picture,</li> <li>k001 is after 1 000 cycles </li> <li>...</li> <li>k220 is after 220 000 cycles </li> </ul>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.