Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
98
datasets available to search
ShareScore release 0.9.0
Dataset results
98 results for “OCEL”
sOCEL 2.0: A Sustainability-Enriched OCEL of a Hinge Production Process
<h2><strong>General Description</strong></h2> <p>The simulated process describes the production of hinges. It begins with a steel coil which is split into steel sheets which are heated, formed and coated before being split into the male and female parts. Subsequently, both components are assembled with a steel pin and packed. The process is describes using events and objects</p> <p>This is an artificial event log according to the <a href="https://www.ocel-standard.org/">OCEL 2.0 Standard</a> defined in Berti et al. simulated using an extended version of CPN-Tools with a connector to climatiq API. The extension to CPN-Tools and the event log simulation are results of the Bachelor Thesis project of Marco Heinisch at the Chair for Process and Data Science at RWTH Aachen University. </p> <h2><strong>Process Overview</strong></h2> <p>In this example scenario, hinges are produced in a German facility. The production process is divided into three workstations, all supervised by a single worker. The production line is started by this employee workstations for workstations every morning at 7:30. The employee pauses work for a lunch break at 12:00 pm and then continues working from 1:00 pm until 3:00 pm. The production process starts with two primary inputs: steel coils and steel pins. The steel pins, also known as steel rods, are each 3.0 cm long and are used to hold the leaves together. The steel coils hold a rolled steel strip that is approximately 0.3 centimeters thick and 3.0 centimeters wide. This steel strip is then processed into hinge leaves through the following steps.</p> <p>In the first operation of our model, one steel coil at a time is processed at the first workstation. Each coil is continuously cut into steel sheets that are 3 cm in length. As these strips are cut, we assign each resulting steel sheet an identification number. This process continues until there is only an unusable steel remainder of the steel coil, which we do not track further in this process. This remainder needs to be classified as waste in preprocessing. The amount of waste created during the production of rolled steel strips varies depending on the initial length and could be optimized. The cut steel sheets are handled in a line and heat-treated in a gas oven. A different oven technology could reduce impacts. Then, each 3.0 cm steel sheet is rolled on one side to form a barrel for the insertion of hinge pins. This operation is performed using a hydraulic press powered by electricity. In our model, we refer to these produced parts as FormedParts. Finally, in a very energy intense step, plasma coating is conducted using a specialized machine. The FormedParts are automatically collected in a transport carriage. If the carriage reaches full capacity, an alert signals the operator to manually move the batch of FormedParts to the second workstation.</p> <p>At the second workstation, <em>FormedParts </em>are shaped into alternating male and female hinge leaves (MalePart and FemalePart) using a laser cutting machine. This is achieved<br>by cutting out specific sections from each part. Notably, the method generates more waste compared to an alternative process where the male and female parts are directly cut out from the coil and then shaped further. The metal waste containing the coat is hypothetically not recyclable, which is reflected in a separate impact indicator. The waste created during this operation is not recorded, however, the weight of the workpiece object before and after the material removal is recorded. </p> <p>In the next step, the worker manually checks both FemalePart and MalePart for quality criteria, which is mass, representing various possible measurable attributes, including geometrics and material properties. If everything is within tolerance, the parts are placed on a moving band to the third workstation. If not, the part represents waste, which again is to be quantified in a preprocessing step. At the next station, an assembling machine uses one MalePart, one FemalePart, and one SteelPin to create a Hinge. The material origin of a hinge or its parts could potentially be discovered. A set of 10 hinges is automatically buffered and placed into a cardboard box by a packaging machine.</p> <h3><strong>Sustainability Data</strong></h3> <p>The event log is enhanced with sustainability-related attributes for objects and events. These attributes can be identified by their naming structure as they begin with either i, p or s and include a unit in square brackets at the end of the attribute name structure, i.e., "i_electricity[kWh]". These additional attribute are classifies into three different categories of data:</p> <ul> <li><strong>Impact Indicators</strong> ("i_"): contain information on all different impacts caused by an event, object, or process. Impact Indicators should be based on some sort of sustainability framework, such as <a href="https://link.springer.com/article/10.1007/s11367-016-1246-y">ReCiPe2016 standard</a>. In this event log, all relevant impact indicators considered in reviewed literature on manufacturing assessments are included according to the Climatiq-API specification to show the potential of automated assessment. Indicators further represent LCI-Items according to the LCA standard. However, to both indicate their relevance and a possible inability to get this data from the process directly some of the values read "??" as they have to be estimated using given impact paqrameters.</li> <li><strong>Impact Parameters </strong>("p_"): As data availability issues may lead to an inavailability to determine impact indicators directly, impact parameters can be included into the event log to support the estimation of impact indicators. These process-specific parameters include, e.g., material, mass, volume, geometric properties, and operation duration.</li> <li><strong>Impact Scores</strong> ("s_"): Impact scores describe the overall effect of a system or event on the environment in a standardised manner. Multiple impact scores for different impact categories, such as climate change or toxicity, can be calculated and represented as impact scores. This process involves aggregating and weighting individual impact indicators according to a standardized methodology, such as ReCiPe2016. Climatic API (used for the simulation of the event log) uses values for impact indicators to return impact scores. </li> </ul> <h2><strong>General Properties </strong></h2> <p>An overview of log properties is given below.</p> <table> <tbody> <tr> <th>Property</th> <th>Value</th> </tr> </tbody> <tbody> <tr> <td>Event Types</td> <td>11</td> </tr> <tr> <td>Object Types</td> <td>12</td> </tr> <tr> <td>Events</td> <td>~3850</td> </tr> <tr> <td>Objects</td> <td>~23700</td> </tr> </tbody> </table> <h2><strong>Process Simulation Design Process</strong></h2> <p>Our result is a simplified hinge production line, modeled as a Colored Petri Net (CPN) in <a href="https://cpntools.org/">CPN Tools</a>, a tool for editing and creating colored Petri nets. This model is an idealized representation of an exemplary manufacturing process. It is designed to examine and present the use case of SD in OCPM and does not realistically represent a specific manufacturing process in detail.</p> <p>The model’s design process was structured into four steps. First, the workpiece flow was outlined, identifying the sub-products used in hinge production.<br>Next, control flow elements were incorporated, adding batching and queuing behaviors as well as quality control procedures. Sustainability data relevant to this example were integrated into events and objects following the sOCEL specification. Finally, the simulation of values such as waiting times and weights now includes randomness and deviations.</p> <h2><strong><br>Simulation Model </strong></h2> <p>The repository with the CPN-Tools model as well as the CPN-Tools extension including the connector to Climatiq API can be found in the following Repositiry: <a href="https://github.com/rwth-pads/sOCEL">https://github.com/rwth-pads/sOCEL</a></p> <p>Further information on the simulated process, the simulation model and the CPN-Tools extension can be found in <a href="https://www.pads.rwth-aachen.de/go/id/bhsfqz" target="_blank" rel="noopener">Marco's thesis</a> entitled "Integrating Sustainability Data into Event Logs for Object-Centric Process Mining".</p> <h2><strong>Acknowledgements</strong></h2> <p>Funded under the Excellence Strategy of the Federal Government and the Länder<em>. </em>Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy - EXC-2023 Internet of Production - 390621612. We also thank the Alexander von Humboldt (AvH) Stiftung for supporting our research.</p> <p>Special thanks are also dedicated to Marco's Family and friends Lennart, Franziska, and Maxim for their support and valuable feedback.</p>
OCEL Chess Pieces Production
<p>This dataset has been created by transforming the dataset </p> <p><a href="https://doi.org/10.5281/zenodo.7419655">https://doi.org/10.5281/zenodo.7419655</a></p> <p>to an object-centric setting, i.e., the recorded event data is stored in the OCEL event log format (see https://ocel-standard.org/). </p> <p> </p>
Procure-To-Payment (P2P) Object-centric Event Log in OCEL 2.0 Standard
<p><strong>Short Description</strong></p> <p>This process describes the Procure-To-Pay (P2P) procedure within an organization, starting from the initiation of a purchase requirement up to the execution of payment. This simulation extensively uses genuine SAP transactions and object types to offer a realistic representation of the P2P process.</p> <p><strong>Overview</strong></p> <p>Within our simulated organization:</p> <ul> <li> <p>Procurement Initiatives: The procurement journey begins when a department or individual recognizes a need and creates a Purchase Requisition using transaction ME51N.</p> </li> <li> <p>Approval Process: Before the purchase can proceed, the requisition must be approved. This is carried out using transaction ME54N. Given the nature of our simulation, there may be instances where the approval process takes an unusually long time, exemplifying the Lengthy Approval Process behavior.</p> </li> <li> <p>Vendor Interactions:</p> <ul> <li>Upon approval, a Request for Quotation is sent out to potential vendors using transaction ME41.</li> <li>Vendors then submit their quotations, which are maintained in the system using transaction ME47.</li> </ul> </li> <li> <p>Purchase Order Creation: Once a vendor's quotation is selected, a Purchase Order is created using transaction ME21N. The purchase order is then subjected to an internal approval process (ME29N). Occasionally, maverick buying—where purchases are made without proper authorization—can be observed.</p> </li> <li> <p>Goods & Invoice Management:</p> <ul> <li>When the goods are received, a Goods Receipt is recorded using transaction MIGO.</li> <li>Invoices from vendors are then received and recorded. A three-way match, which checks the purchase order, goods receipt, and invoice for discrepancies, is performed using transaction MRBR.</li> </ul> </li> <li> <p>Payment: Once everything is verified, payments are executed using transaction F110. However, there may be instances of Duplicate Payments in our simulation, where the system mistakenly pays the same invoice more than once.</p> </li> </ul> <p><strong>Special Behaviors:</strong></p> <ul> <li>Maverick Buying: Unauthorized purchases, bypassing the standard procedure.</li> <li>Duplicate Payments: An error leading to the same invoice being paid multiple times.</li> <li>Lengthy Approval Process: Delays in approving purchase requisitions or purchase orders, which might lead to operational inefficiencies.</li> </ul> <p><strong>General Properties</strong></p> <p>An overview of log properties is given below.</p> <table> <thead> <tr> <th>Property</th> <th>Value</th> </tr> </thead> <tbody> <tr> <td>Event Types</td> <td>10</td> </tr> <tr> <td>Object Types</td> <td>7</td> </tr> <tr> <td>Events</td> <td>14671</td> </tr> <tr> <td>Objects</td> <td>9543</td> </tr> </tbody> </table> <p><strong>Authors</strong></p> <p>Gyunam Park and Leah Tacke genannt Unterberg</p> <p><strong>Contributing</strong></p> <p>To contribute, drop us an email! We are happy to receive your feedback.</p>
Fig. 52. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 52. Potamotrygon amandae, n. sp. Anatomical details from radiograph of holotype, MZUSP 110910. Abbreviations: AAC, anterior angular cartilage; PAC, posterior angular cartilage.
Fig. 51. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 51. Potamotrygon amandae, n. sp. Dorsal and ventral views of neurocranium and mandibular arch (in ventral view) of a non-type adult male specimen, MZUSP 111148, 280 mm DW. Abbreviations: AAC, anterior angular cartilage; CL, calcified ligament; DLP, dorsolateral process; EPB, epiphysial bar; FPF, frontoparietal fontanelle; HYO, hyomandibula; MC, Meckel's cartilage; PAC, posterior angular cartilage; PCF, precerebral fontanelle; POP, postorbital process; PQ, palatoquadrate PRP, preorbital process; SP, supraorbital process.
Fig. 49. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 49. Potamotrygon amandae, n. sp. MZUSP 111148: (a) Dorsal view of tail showing the entire dorsal rows of enlarged pointed spines, (b) showing the rows and format of pointed spines, and (c) detail of some pointed spines of dorsal rows.
Fig. 47 in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 47. Patterns of ocelli and spots in specimens of P. amandae, n. sp.: (a) holotype MZUSP 110910, (b) MZUSP 110904 and (c) MZUSP 110906.
Fig. 46. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 46. Potamotrygon amandae, n. sp. Dorsal view of right clasper of an adult male, MZUSP 111148, adult male, 280 mm DW. Abbreviations: ap, apopyle; cg, clasper groove; dp, dorsal pseudosiphon; hp, hypopyle; vp, ventral pseudosiphon.
Fig. 50. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 50. Potamotrygon amandae, n. sp. Ventral canals of lateral line system in a non-type adult female specimen, MZUSP 111140, 254 mm DW. Abbreviations: hyc, hyomandibular canal; ioc, infraorbital canal; mnc, mandibular canal; nas, nasal canal; suc, supraorbital canal; ach, angular component of hyomandibular canal; iol, infraorbital loop; jch, jugular component of hyomandibular canal; nil, nasointernal loop; onc, orbitonasal component of supraorbital canal; pnc, prenasal component of nasal canal; pnl, prenasal loop; pst, posterior subpleural tubule; sbr, subrostral component of supraorbital canal; sol, suborbital loop; spc, subpleural component of hyomandibular canal; spl, subpleural loop; spt, subpleural tubules; sub, suborbital component of infraorbital canal.
Fig. 45. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 45. Potamotrygon amandae, n. sp. Upper and lower jaws of a non-type adult female specimen, MZUSP 110916, 275 mm DW.
Fig. 41. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 41. Potamotrygon amandae, n. sp. Dorsal (a) and ventral (b) views of paratype, MZUSP 110907, adult female, 270 mm DW, from Paraguay River.
Fig. 48. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 48. Potamotrygon amandae, n. sp. Detail of dermal denticles present in a non-type juvenile male specimen, MZUSP 111150, 215 mm DW, showing the two morphological types of denticles, with star-shaped and pointed crowns.
Fig. 40. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 40. Potamotrygon amandae, n. sp. Dorsal (a) and ventral (b) views of paratype, MZUSP 110906, adult female, 294 mm DW, from Paraguay River.
Fig. 39. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 39. Potamotrygon amandae, n. sp. Dorsal (a) and ventral (b) views of paratype, MZUSP 110904, adult male, 312 mm DW, from Paraná River.
Fig. 38. Potamotrygon amandae, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 38. Potamotrygon amandae, n. sp. Dorsal (a) and ventral (b) views of holotype, MZUSP 110910, adult female, 341 mm DW, Paraguay River.
Fig. 36. Potamotrygon pantanensis, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 36. Potamotrygon pantanensis, n. sp. Anatomical details from radiograph of holotype, MZUSP 110890. Abbreviations: AAC, anterior angular cartilage; PAC, posterior angular cartilage.
Fig. 37 in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 37. Distribution of Potamotrygon pantanensis, n. sp. in the Paraná-Paraguay system. Blue circles show localities where specimens of P. pantanensis were obtained for this study. Blue star indicates Cuiabá River, type locality of P. pantanesis.
Fig. 35. Potamotrygon pantanensi, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 35. Potamotrygon pantanensi, n. sp. Dorsal and ventral views of neurocranium and mandibular arch of an adult female, MZUSP 110895. Abbreviations: AAC, anterior angular cartilage; CL, calcified ligament; DLP, dorsolateral process; EPB, epiphysial bar; FPF, frontoparietal fontanelle; HYO, hyomandibula; MC, Meckel's cartilage; PAC, posterior angular cartilage; PCF, precerebral fontanelle; POP, postorbital process; PQ, palatoquadrate PRP, preorbital process; SP, supraorbital process.
Fig. 34. Potamotrygon pantanensis, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 34. Potamotrygon pantanensis, n. sp. Ventral canals of lateral line system in an adult female non-type specimen, MZUSP 110899, 289 mm DW. Abbreviatons: hyc, hyomandibular canal; ioc, infraorbital canal; mnc, mandibular canal; nas, nasal canal; suc, supraorbital canal; ach, angular component of hyomandibular canal; iol, infraorbital loop; jch, jugular component of hyomandibular canal; nil, nasointernal loop; onc, orbitonasal component of supraorbital canal; pnc, prenasal component of nasal canal; pnl, prenasal loop; pst, posterior subpleural tubule; sbr, subrostral component of supraorbital canal; sol, suborbital loop; spc, subpleural component of hyomandibular canal; spl, subpleural loop; spt, subpleural tubules; sub, suborbital component of infraorbital canal.
Fig. 33. Potamotrygon pantanensis, n in Systematic revision of the Potamotrygon motoro (Müller & Henle, 1841) species complex in the Paraná-Paraguay basin, with description of two new ocellated species (Chondrichthyes: Myliobatiformes: Potamotrygonidae)
Fig. 33. Potamotrygon pantanensis, n. sp. MZUSP 110895: (a) Dorsal view of tail showing the entire dorsal row of enlarged pointed-spines, (b) showing the double rows and shape of pointed-spines, and (c) detail of some pointed-spines of dorsal rows.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.