Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
9
datasets available to search
ShareScore release 0.9.0
Dataset results
9 results for “PRE-Campaign”
TEAMx-PC22 (TEAMx pre-campaign 2022) - ACINN Doppler wind lidar data sets (SL88, SLXR142)
<p><strong>ABSTRACT</strong></p> <p>The data sets found here were collected with <a href="http://acinn.uibk.ac.at/">ACINN</a>'s Doppler wind lidars SL88 and SLXR142 in Innsbruck, Austria, in summer 2022 in the framework of the TEAMx pre-campaign 2022 (TEAMx-PC22). The aim of TEAMx-PC22 was to test new instruments, new instrument configurations and new measurement sites to support the planning of the main TEAMx observational campaign (TOC) in 2024/2025. More details about TEAMx can be found at <a href="http://www.teamx-programme.org">http://www.teamx-programme.org</a> as well as in Serafin et al. (2020) and in Rotach et al. (2022).</p> <p><strong>DATA SET DESCRIPTION</strong></p> <p><strong>1. Spatial coverage and locations</strong></p> <p>Measurements with the SL88 and SLXR142 lidar were collected during TEAMx-PC22 in Innsbruck, Austria, at the Campus Innrain of the University of Innsbruck. More specifically, the SLXR142 lidar was located on the rooftop of one of the university buildings (Bruno-Sander-Haus) at Innrain 52f. The SL88 lidar was located in the forecourt of the Campus Innrain, the so-called GEIWI-Forum, next to the Bruno-Sander-Haus. The exact lidar locations are:</p> <ul> <li>SL88: 47.264083°N / 11.384986°E / 575 m MSL</li> <li>SLXR142: 47.26431°N / 11.38529°E / 613 m MSL</li> </ul> <p><strong>2. Temporal coverage</strong></p> <p>The TEAMx-PC22 lasted from mid-May 2022 to early October 2022. However, the SL88 data set contains a shorter period from 11 August to 02 October 2022 (1 Hz data, vertical stares). The SLXR142 data set covers an extended period from 01 May to 31 October 2022 (VAD products, 10-min averages) as this lidar was operated in a semi-permanent mode.</p> <p><strong>3. Instrument details</strong></p> <p><em><strong>General</strong></em></p> <p>Measurements were taken with two scanning Doppler wind lidars, model Stream Line (SL88) and Stream Line XR (SLXR142), manufactured by HALO Photonics. The SL88 and SLXR142 are part of the Innsbruck Atmospheric Observatory (IAO; Karl et al. 2020). Available here are vertical profiles of radial velocity and backscatter data based on vertical stares at 1 Hz for the SL88 lidar and vertical profiles of horizontal winds (10-min averages) derived from plan position indicator (PPI) scans by applying the VAD method for the SLXR142 lidar. PPI scans were performed as continuous motion scans (CSM mode) at an azimuth angle of 70°. For continuous motion scans, the scanner moves continuously (changing its azimuth angle) while data is being acquired.</p> <p><em><strong>Data correction</strong></em></p> <p>No corrections were applied to the data (level0 data).</p> <p><strong>4. Data file structure</strong></p> <p><em><strong>File format</strong></em></p> <p>Provided are data in netCDF format. File names contain date and time information in UTC. The following wildcard characters are used in the file examples below: yyyy - year; mm - month, dd - day; HH - hour, MM - minute, `SS` - second. NetCDF data files are zipped together into the following zip files.</p> <p><em><strong>Zip files</strong></em></p> <p>SL88.zip contains netCDF files of SL88 data structured into subdirectories (one subdirectory for each month, yyyymm, and one for each day, yyyymmdd).</p> <p>SLXR142.zip contains netCDF files of SLXR142 data structured into subdirectories (one subdirectory for each month, yyyymm).</p> <p><em><strong>NetCDF files for uncorrected SL88 data</strong></em></p> <p>Stare_88_yyyymmdd_HH_l0.nc contains vertical stare measurements aggregated together in one netCDF file for each hour (uncorrected level0 data).</p> <p><em><strong>NetCDF files for SLXR142 data products</strong></em></p> <p>yyyymmdd.nc contains vertical profiles of the horizontal wind vector derived from PPI scans by applying the VAD technique. Each vertical profile is based on several PPI scans conducted at an elevation angle of 70° within 10 minutes. Hence, each profile represents a 10-min average. Profiles are aggregated together for each day in a separate netCDF file.</p> <p><strong>6. Contact</strong></p> <p>Contact alexander.gohm(at)uibk.ac.at for any questions regarding the data set.</p> <p><strong>7. References</strong></p> <p>Karl, T., A. Gohm, M.W. Rotach, H.C. Ward, M. Graus, A. Cede, G. Wohlfahrt, A. Hammerle, M. Haid, M. Tiefengraber, C. Lamprecht, J. Vergeiner, A. Kreuter, J. Wagner, M. Staudinger, 2020: Studying urban climate and air quality in the Alps: The Innsbruck Atmospheric Observatory. <em>Bulletin of the American Meteorological Society,</em> <strong>101,</strong> E488–E507, <a href="https://doi.org/10.1175/bams-d-19-0270.1">https://doi.org/10.1175/bams-d-19-0270.1</a></p> <p>Serafin, S., M. W. Rotach, M. Arpagaus, I. Colfescu, J. Cuxart, S. F. J. De Wekker, M. Evans, V. Grubišić, N. Kalthoff, T. Karl, D. J. Kirshbaum, M. Lehner, S. Mobbs, A. Paci, E. Palazzi, A. Raudzens Bailey, J. Schmidli, G. Wohlfahrt, B. Zardi, 2020: <em>Multi-scale transport and exchange processes in the atmosphere over mountains: Programme and experiment.</em> Innsbruck University Press. <a href="https://doi.org/10.15203/99106-003-1">https://doi.org/10.15203/99106-003-1</a></p> <p>Rotach, M. W., S. Serafin, H. C. Ward, M. Arpagaus, I. Colfescu, J. Cuxart, S. F. J. D. Wekker, V. Grubišic, N. Kalthoff, T. Karl, D. J. Kirshbaum, M. Lehner, S. Mobbs, A. Paci, E. Palazzi, A. Bailey, J. Schmidli, C. Wittmann, G. Wohlfahrt, D. Zardi, 2022: A collaborative effort to better understand, measure, and model atmospheric exchange processes over mountains. <em>Bulletin of the American Meteorological Society,</em> <strong>103,</strong> E1282–E1295. <a href="https://doi.org/10.1175/bams-d-21-0232.1">https://doi.org/10.1175/bams-d-21-0232.1</a></p>
TEAMx-PC22 (TEAMx pre-campaign 2022) – DWD AWS dataset for the Inn Valley exit area
<p>This dataset contains data measured at 5 automatic weather stations operated by the German Meteorological Service (DWD) during the TEAMx pre-campaign 2022. More details about TEAMx can be found at <a href="http://www.teamx-programme.org/">http://www.teamx-programme.org</a>.</p> <p><strong>DATA SET DESCRIPTION</strong></p> <p><strong>1. Measurement location, instrumentation and measured variables</strong></p> <p>The following table lists the station locations and available measurements. Data of the automatic weather stations is provided from the given start date until 19.10.2022 23:50 at a temporal resolution of 10min. If not noted otherwise, wind, temperature, humidity and pressure are measured at 2m above ground, precipitation at 1m above ground.</p> <table> <thead> <tr> <th scope="col">Station name</th> <th scope="col">start of deployment</th> <th scope="col">location and elevation</th> <th scope="col">instruments</th> <th scope="col">measured variables</th> </tr> </thead> <tbody> <tr> <td>Brannenburg</td> <td>24.06.2022</td> <td> <p>47.742360 N</p> <p>12.121712 E</p> <p>456 m MSL</p> </td> <td> <p>LTS2000, HMP45d, Gill,</p> <p>mSonic3, PTB330, CNR4,</p> <p>Pluvio, HFP01SC</p> </td> <td> <p>U_xm,V_xm,W_xm (2m*,4m,10m*)</p> <p>T, TX, TN, RH, P, RR, GSR, RSR, ALR, SLR</p> </td> </tr> <tr> <td>Flintsbach</td> <td>02.06.2022</td> <td> <p>47.728401 N</p> <p>12.127413 E</p> <p>468 m MSL</p> </td> <td>LTS2000, HMP45d, Thies</td> <td>WDIR, WSPEED, T, TX, TN, RH</td> </tr> <tr> <td>Hohe Asten</td> <td>02.06.2022</td> <td> <p>47.703476 N</p> <p>12.115288 E</p> <p>1226 m MSL</p> </td> <td>LTS2000, HMP45d, Thies</td> <td>WDIR, WSPEED, T, TX, TN, RH</td> </tr> <tr> <td>Kiefersfelden</td> <td>05.06.2022</td> <td> <p>47.607147 N</p> <p>12.202737 E</p> <p>473 m MSL</p> </td> <td> <p>LTS2000, HMP45d, Thies,</p> <p>PTB110</p> </td> <td>WDIR, WSPEED, T, TX, TN, RH, P</td> </tr> <tr> <td>Oberaudorf</td> <td>05.06.2022</td> <td> <p>47.654282 N</p> <p>12.180008 E</p> <p>466 m MSL</p> </td> <td>LTS2000, HMP45d, Thies</td> <td>WDIR, WSPEED, T, TX, TN, RH</td> </tr> </tbody> </table> <p> </p> <p> </p> <p><em>Variable abbreviations: U_xm, V_xm=horizontal wind components xm above ground, W=vertical wind component, WDIR=wind direction [°], WSPEED= wind speed [m/s], T=average temperature [°C], TX=maximum temperature [°C], TN=minimum temperature [°C], RH=relative humidity [%], P=pressure [hPa], GSR=global shortwave radiation [W/m<sup>2</sup>], RSR=reflected shortwave radiation [W/m<sup>2</sup>], ALR=atmospheric longwave radiation [W/m<sup>2</sup>], SLR= surface longwave radiation [W/m<sup>2</sup>]</em></p> <p> </p> <p> </p> <p><strong>* </strong>due to quality issues, wind components in 2 and 10m at Brannenburg will be made available at a later date.</p> <p><strong><em>2. Data corrections</em></strong></p> <p>Basic quality checks were applied to the data. Missing values are indicated by NA.</p> <p><strong>3. Data file structure</strong></p> <p>The data are provided in separate .txt files for each station. Files are tab separated. The first column lists the date in the format year-month-day hour:minutes:second. The following column names correspond to the variables listed in section 1.</p> <p><strong>4. Contact</strong></p> <p>Contact Katrin.sedlmeier(at)dwd.de.at for any questions regarding the data set.</p>
TEAMx-PC22 (TEAMx pre-campaign 2022) – video clip
<p><strong>ABSTRACT</strong></p> <p>This video clip gives a brief overview of the measurement activities during the TEAMx pre-campaign in summer 2022 (TEAMx-PC22). Although it shows some of the main measurement locations and instruments in the lower Inn Valley (Austria), it is far from being complete. Unfortunately, there are no impressions of the measurements conducted in the exit region of the Inn Valley, near Innsbruck, or at other sites in the Alps. More information on TEAMx (Multi-scale transport and exchange processes in the atmosphere over mountains – programme and experiment) including the upcoming main campaign (TEAMx Observational Campaign TOC) can be found here: <a href="http://www.teamx-programme.org/">http://www.teamx-programme.org/</a></p> <p><strong>DATA SET DESCRIPTION</strong></p> <p>The video is provided in two different resolutions and thus two different file sizes (highres=934 MB and lowres=239 MB). The video was assembled from multiple clips recorded with a DJI Mini 2 drone using the online video editor FlexClip.</p>
TEAMx-PC22 (TEAMx pre-campaign 2022) - Radial velocity and coplanar-retrieved horizontal wind fields from KITcube Leosphere/Vaisala Windcube WLS200s-124 and WLS200s-159
<p><strong>Abstract</strong></p> <p>This data set was collected during the TEAMx pre-campaign in summer 2022 (TEAMx-PC22) in the Inn Valley Target Area, Austria.</p> <p><strong>Data description</strong></p> <p>This data set is comprised of a single TAR file containing 1536 hourly NetCDF files. Within these, radial velocities from KITcube Leosphere/Vaisala Windcube WLS200s-124 and WLS200s-159 Doppler wind lidars, as well as coplanar-retrieved horizontal wind speed components in their common scanning plane are stored. </p> <p>The time period is 29 June 2022, 00:00 UTC - 31 August 2022, 23:58 UTC.</p> <p>More details about the variables, lidar locations, scan details, as well as post-processing can be found in the NetCDF metadata. The wind fields stored in the NetCDF files are also available in daily animation form under an accompanying Zenodo Video/Audio data set (DOI: 10.5281/zenodo.7212837).</p>
TEAMx-PC22 (TEAMx pre-campaign 2022) – Vertical profiles and Multi-Point In-Situ Measurements at Nafingalm collected with the SWUF-3D UAS fleet
<p>This dataset contains aggregated measurements from a fleet of multicopter UAS. The data was measured during the period 21 June 2022 through 27 June 2022 at Nafingalm, Austria with the SWUF-3D fleet. The data was collected in association to the TEAMx-PC22 field campaign. A maximum of three UAS were operated simultaneously. Processed level-2 data is provided. For level-2 data, time synchronization between individual UAS was done through interpolation, if multiple UAS are operated simultaneously.</p> <p>In this dataset vertical profiles (swuf3dvpro) between 10m and 120m above ground level and time series of UAS hovering for approx. 10 minutes at fixed positions (swuf3dhover) are provided with a temporal resolution of 1 Hz.</p> <p>The data are provided in NetCDF format with metadata and variable descriptions in the style of the SAMD Product standard: Jahnke-Bornemann, Annika. (2022, August 18). The SAMD Product Standard (Standardized Atmospheric Measurement Data) (Version 2.2). http://doi.org/10.25592/uhhfdm.10416</p>
TEAMx-PC22 (TEAMx pre-campaign 2022) – DWD Radiosonde lauches and drone measurements at Brannenburg
<p>This dataset contains data from 9 radiosonde launches and 6 drone ascents of an IOP on 18./19.7.2022 during the TEAMx pre-campaign 2022. More details about TEAMx can be found at <a href="http://www.teamx-programme.org/">http://www.teamx-programme.org</a>.</p> <p><strong>DATA SET DESCRIPTION</strong></p> <p><strong>1. Measurement location and measured variables</strong></p> <p>Radiosonde launches and drone measurements were conducted at the site of Brannenburg (456m MSL) at the following coordinates:</p> <table> <thead> <tr> <th scope="col"> </th> <th scope="col">Coordinates</th> <th scope="col">Instrument</th> <th scope="col">Measured Variables</th> <th scope="col">Time of sounding [UTC]</th> </tr> </thead> <tbody> <tr> <td>Radiosonde</td> <td> <p>47.742376 N</p> 12.121785 E</td> <td>Radiosonde Vaisala RS41</td> <td>GPH, WDIR, WSPEED, T, DT, potT, P</td> <td> <p>18.07. 12:03</p> <p>18.07. 13:45</p> <p>18.07. 16:45</p> <p>18.07. 19:45</p> <p>18.07. 22:45</p> <p>19.07. 01:45</p> <p>19.07. 04:42</p> <p>19.07. 07:46</p> 19.07. 08:28</td> </tr> <tr> <td>Drone</td> <td> <p>47.742840 N</p> <p>12.121808 E</p> </td> <td>Drone DJI Mavic pro, iMETXQ2</td> <td>T, RH, P</td> <td> <p>18.07. 12:45</p> <p>18.07. 13:45</p> <p>18.07. 16:45</p> <p>18.07. 22:45</p> 19.07. 01:45</td> </tr> </tbody> </table> <p> </p> <p> </p> <p> </p>
TEAMx-PC22 (TEAMx pre-campaign 2022) – DWD Doppler wind lidar data set (SLXR172)
<p>This dataset contains data measured by DWD with a Doppler Wind Lidar SLXR172 during the TEAMx pre-campaign 2022. More details about TEAMx can be found at <a href="http://www.teamx-programme.org/">http://www.teamx-programme.org</a>.</p> <p><strong>DATA SET DESCRIPTION</strong></p> <p><strong>1. Measurement location and time period </strong></p> <p>Measurements with the SLXR172 were collected at the site of Brannenburg (47.741547 N / 12.122187 E / 456 m MSL) between 15.June – 19 October 2022.</p> <p><strong>2. Measurement setup</strong></p> <p>During the measurement period, two different scanning modes were applied:</p> <p>15. June - 26. July 2022 and 13. August – 19. October 2022 (VAD_CSM).</p> <ul> <li><strong>VAD (velocity-azimuth display) scans in </strong><strong>continuous scanning mode</strong><strong> : </strong>These scans were conducted at an elevation angle of 35°. Azimuth angle interval of the CSM data sampling was about 1.1°. </li> </ul> <p>27.July – 12. August 2022 (VAD_RHI)</p> <ul> <li><strong>VAD scans in step-stare mode: </strong>Step-stare scans were conducted at an elevation angle of 35° and with azimuth steps of 15°.</li> <li><strong>RHI (</strong><strong>range-height indicator) scans into the Inn Valley</strong>; The RHI scans were performed for 10 azimuth angles from 151° to 160° and covered elevation angles from 3° to 51°.</li> </ul> <p> </p> <p><strong><em>3. Data processing, corrections and filter</em></strong></p> <p>For <strong><em>VAD scans in continuous scanning mode</em></strong> the processed wind fields are provided. The data have not been corrected. The data can be filtered using the parameters R<sup>2 </sup>(coefficient of determination), CN (condition number) and NVRAD (number of radial velocities) as described in Päschke (2015):</p> <p>R<sup>2</sup>> 0.95 and CN<10 and NVRAD>12 </p> <p>Please note that in the postprocessing of the VAD CSM scans, the R<sup>2</sup> filter criterion was set to R<sup>2</sup>>0 in order to include all data and therefore might also include scans where the assumptions of homogeneity are not fulfilled. The parameter qwind is therefore not meaningful due to this configuration and should not be used to filter the data. We recommend the use of the above criterion from Päschke.</p> <p>For scans from the <strong><em>VAD scans in step stare mode</em></strong> as well as the <strong><em>RHI scans</em></strong> the raw data files are provided. They have not been corrected nor filtered.</p> <p><strong>4. Data file structure</strong></p> <p>The data are provided in NetCDF format. File names contain date and time information in UTC. The following wildcard characters are used in the file examples below: yyyy - year; mm - month, dd - day; HH - hour, MM - minute, `SS` - second. Files are sorted in monthly folders.</p> <p>The data are provided in two zip-files.</p> <ul> <li>VAD_CSM contains the processed wind fields from 15. June - 26. July 2022 and from 13. August – 19. October 2022)</li> <li>VAD+RHI the raw data files for 27.July – 12. August 2022.</li> </ul> <p>Raw data files of the VAD CSM scans can be provided upon request.</p> <p><strong>5. Contact</strong></p> <p>Contact Katrin.sedlmeier(at)dwd.de.at for any questions regarding the data set.</p> <p><strong>6. References</strong></p> <p>Päschke, E., Leinweber, R., and Lehmann, V.: An assessment of the performance of a 1.5 μm Doppler lidar for operational vertical wind profiling based on a 1-year trial, Atmos. Meas. Tech., 8, 2251–2266, https://doi.org/10.5194/amt-8-2251-2015, 2015.</p>
TEAMx-PC22 (TEAMx pre-campaign 2022) - Animations of radial velocity and coplanar-retrieved horizontal wind fields from KITcube Leosphere/Vaisala Windcube WLS200s-124 and WLS200s-159
<p><strong>Abstract</strong></p> <p>This data set was collected during the TEAMx pre-campaign in summer 2022 (TEAMx-PC22) in the Inn Valley Target Area, Austria.</p> <p><strong>Data Description</strong></p> <p>This data set is comprised of 64 daily .mp4 files showing:</p> <ul> <li>post-processed radial velocity fields sampled by KITcube Leosphere/Vaisala Windcube WLS200s-124 and WLS200s-159</li> <li>their coplanar-retrieved horizontal wind field output</li> <li>additionally, horizontal wind speed and direction sampled by the KITcube Vaisala Windcube v2.1 (WLS7-1489) at 60-m above ground level is added as an independent measurement for subjective validation of the coplanar-retrieved wind</li> </ul> <p>The wind fields shown in the animations originate from an accompanying Zenodo data set (DOI: 10.5281/zenodo.7212801), where complete information concerning lidar locations, scan parameters, and post-processing may be found.</p>
TEAMx-PC22 (TEAMx pre-campaign 2022) - VAD products from KITcube Leosphere/Vaisala Windcube WLS200s-115
<p><strong>Abstract</strong></p> <p>This data set was collected during the TEAMx pre-campaign in summer 2022 (TEAMx-PC22) in the Inn Valley Target Area, Austria.</p> <p><strong>Data description</strong></p> <p>This data set is comprised of a single NetCDF file containing select variables from the KITcube Leosphere/Vaisala Windcube WLS200s-115. This lidar performed a loop consisting of a PPI and a DBS scan. The velocity-azimuth display (VAD) algorithm was applied to each PPI, and the resulting output of just these PPIs is stored in the files. If DBS files are desired, please contact the author. The variable names and metadata structure were designed to conform as closely as possible to the E-PROFILE conventions adopted currently by MeteoSwiss.</p> <p>The time period is 9 June 2022, 00:00 UTC - 18 September 2022, 00:00 UTC.</p> <p>More details about the variables, lidar locations, scan details, as well as post-processing can be found in the NetCDF metadata.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.