Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
2
datasets available to search
ShareScore release 0.9.0
Dataset results
2 results for “Particle-continuum coupling”
On equilibrating non-periodic molecular dynamics samples for coupled particle-continuum simulations of amorphous polymers: dataset
<p><strong>Abstract:</strong><br> (from [1])<br> In the context of fracture simulations of polymers, the molecular mechanisms in the vicinity of the<br> crack tip are of particular interest. Nevertheless, to keep the computational cost to a minimum, a<br> coarser resolution must be used in the remaining regions of the numerical sample. For the specific<br> case of amorphous polymers, the Capriccio method bridges the gap between the length and time scales<br> involved at the different levels of resolution by concurrently coupling molecular dynamics (MD) with<br> the finite element method (FEM). Within the scope of the Capriccio approach, the coupling to the<br> molecular MD region introduces non-periodic, so-called stochastic boundary conditions (SBC). In<br> similarity to typical simulations under periodic boundary conditions (PBC), the SBC MD simulations<br> must reach an equilibrium state before mechanical loads are exerted on the coupled systems. In this<br> contribution, we hence extensively study the equilibration properties of non-periodic MD samples<br> using the Capriccio method. We demonstrate that the relaxation behavior of an MD-FE coupled<br> MD domain utilizing non-periodic boundary conditions is rather insensitive to the specific coupling<br> parameters of the method chosen to implement the boundary conditions. The behavior of an exemplary<br> system equilibrated with the parameter set considered as optimal is further studied under uniaxial<br> tension and we observe some peculiarities in view of creep and relaxation phenomena. This raises<br> important questions to be addressed in the further development of the Capriccio method.<br> <br> <strong>Contact:</strong><br> Felix Weber<br> Institute of Applied Mechanics<br> Friedrich-Alexander-Universität Erlangen-Nürnberg<br> Egerlandstr. 5<br> 91058 Erlangen<br> Germany<br> <br> <strong>Context:</strong><br> This dataset contains the results presented in [1] and related data.</p> <p><strong>Content:</strong><br> Throughout this data set, Lammps [2] real units are used. The following folders contain the results obtained under periodic boundary conditions:<br> - biax_PBC: biaxial loading <br> - equil_PBC: equilibration<br> - ut_PBC: uniaxial tension<br> Each simulation directory contains:<br> - input.prm: input parameters of the specific simulation (read by the input file)<br> - job.out: simulation log file<br> - meta.info: meta data of the specific simulation run<br> - Lammps input file (*.in) of the specific simulation<br> - Lammps data file (*.data, molecular style) of the investigated sample<br> - LAMMPS_out: resulting Lammps data and restart (*.rst) files and simulation results (Lammps thermo_out) in <br> tabulated form, an overview of the columns is given in the respective folders</p> <p>The following folders contain the results obtained under stochastic boundary conditions using the Capriccio method [3]:<br> - best: equilibration with the parameter set considered to be most suitable for the MD-FE coupled equilibration<br> - biax: biaxial loading<br> - bridging: equilibration with different adaptivity levels of the bridging domain<br> - descr_obs: equilibration with a Lagrangian frame for the description of the observation region<br> - dpd: equilibration with different thicknesses of the dissipative particle dynamics (DPD) region<br> - friccoeff: equilibration with different friction coefficients applied in the dissipative particle dynamics region<br> - fur: equilibration with different numbers of fur beads <br> - gausspoints: equilibration with different numbers of quadrature points per direction <br> - min: equilibration applying an initial, static energy minimization<br> - nodes: equilibration with a higher number of finite element nodes<br> - shifted: equilibration with particle systems obtained at different positions and points in time within the periodic master system<br> - smdcub: equilibration with different remaining stiffness ratios for the cubic modified weighting factor<br> - smdlin: equilibration with different remaining stiffness ratios for the linear modified weighting factor<br> - timestepsize: equilibration with different molecular dynamics time step sizes<br> - ut: uniaxial tension<br> - ut_friccoeff: uniaxial tension with different friction coefficients applied in the dissipative particle dynamics region<br> - weighting: equilibration with different energy weighting functions<br> - youngsmod: equilibration with different Young's moduli<br> Each simulation directory contains:<br> - input_files: Abaqus [4] input file (*.inp) and Lammps data file (*.data, molecular style) of the investigated sample<br> - MD_data: Results evaluated in the molecular dynamics region. MD_data contains the following subfolders: <br> anchorforces (dumped force components on the anchor points (AP) in kcal/mol, files anchorforce_[load step]_[MD-FE iteration].AF), <br> data (resulting Lammps data files *.[load step].[MD-FE iteration].data), Density (dumped mass density in the observation region in kg/m^3), <br> Energy (dumped total (kinetic + potential), angle, bond, and pair energies in kcal/(mol*Angstrom)), Strain (integral strains in the<br> observation region in x-, y-, and z-direction calculated by means of the Matlab [5] script calc_OBSstrain.m),<br> Stress (stresses in the observation region in MPa), and Temperature (temperature in the observation region in K)<br> - job.out: simulation log file<br> - meta.info: meta data of the specific Lammps simulation<br> Information on the subfolders is given in the respective folders.</p> <p><strong>References:</strong><br> [1] F. Weber, M. Ries, C. Bauer, C. R. Wick, S. Pfaller, "On equilibrating non-periodic molecular dynamics samples for coupled<br> particle-continuum simulations of amorphous polymers", Forces in Mechanics, 2023, 10, 100159.<br> [2] A. P. Thompson, H. M. Aktulga, R. Berger, D. S. Bolintineanu, W. M. Brown, P. S. Crozier, P. J. in 't Veld, A. Kohlmeyer, <br> S. G. Moore, T. D. Nguyen, R. Shan, M. J. Stevens, J. Tranchida, C. Trott, S. J. Plimpton, "LAMMPS - a flexible simulation tool <br> for particle-based materials modeling at the atomic, meso, and continuum scales", Computer Physics Communications, 2022, 271, 108171.<br> [3] S. Pfaller, M. Rahimi, G. Possart, P. Steinmann, F. Müller-Plathe, M. C. Böhm, "An Arlequin-based method to couple molecular dynamics <br> and finite element simulations of amorphous polymers and nanocomposites", Computer Methods in Applied Mechanics and Engineering, <br> 2013, 260, 109-129. <br> [4] Dassault Systèmes, "Abaqus documentation", URL: https://abaqus-docs.mit.edu/2017/English/SIMACAEEXCRefMap/simaexc-c-docproc.htm.<br> [5] The MathWorks, Inc, "MATLAB. The Language of Technical Computing", URL: https://de.mathworks.com/help/matlab/.</p> <p><strong>Funding:</strong><br> This research was funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) -<br> 377472739/GRK 2423/1-2019. The authors are very grateful for this support. Sebastian Pfaller is furthermore<br> funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) - 396414850 (Individual<br> Research Grant ’Identifikation von Interphaseneigenschaften in Nanokompositen’).</p>
Investigating fracture mechanisms in glassy polymers using coupled particle-continuum simulations
<p>This repository contains public data for the publication "Investigating fracture mechanisms in glassy polymers using coupled atomistic-continuum simulations" [1].</p> <p>These scripts, force fields, topologies and other files may be used to reproduce the simulations and calculations that led to the above publication.</p> <p>The folder "md simulations" contains data files for pure MD simulations that were used as a reference for understanding molecular fracture mechanisms in our model.</p> <p>The folder "coupled simulations" contains data files for coupled MD-FE simulations which are the highlight of our publication.</p> <p> </p> <p>Reference:</p> <p>[1] W. Zhao, Y. Jain, F. Müller-Plathe, P. Steinmann, S. Pfaller, "Investigating fracture mechanisms in glassy polymers using coupled particle-continuum simulations", Journal of the Mechanics and Physics of Solids, 2024, 105884. DOI: <a title="Persistent link using digital object identifier" href="https://doi.org/10.1016/j.jmps.2024.105884" target="_blank" rel="noreferrer noopener"><span><span>https://doi.org/10.1016/j.jmps.2024.105884</span></span></a></p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.