Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
54
datasets available to search
ShareScore release 0.9.0
Dataset results
54 results for “SCUBA”
Evolution of cosmic star formation in the SCUBA-2 Cosmology Legacy Survey
<p>This dataset consists of tabulated data from the figures included in the referenced publication. The following datasets are included:</p> <p>Stacked SFR obscuration (IRX=IR/UV) of UVJ-selected star-forming galaxies:</p> <ul> <li>Weighted mean IRX as a function of Muv & stellar mass (Figure 12): MUV_irx1.dat</li> <li>Weighted mean IRX as a function of beta, over all masses and redshifts: beta_irx.dat</li> <li>Weighted mean IRX as a function of beta, binned by stellar mass (Figure 13): beta_irx_mstar.dat</li> <li>Weighted mean IRX as a function of beta, binned by redshift (Figure 14): beta_irx_z.dat</li> </ul> <p>Cosmic SFR density as a function of redshift for massive galaxies log(Ms/Msol)>10 (Figure 15):</p> <ul> <li>All mass-selected galaxies: sfrd_massive.dat</li> <li>UV-luminous galaxies Muv<M*; log(Ms/Msol)>10: sfrd_hiLUV.dat</li> <li>IR-luminous galaxies detected at 450µm: sfrd_IRdet.dat</li> </ul> <p> </p> <p>Cosmic SFR density as a function of redshift corrected to all stellar masses (Figure 16):</p> <ul> <li>All mass-selected galaxies: sfrd_uvlfcorr.dat</li> <li>UV-luminous galaxies Muv<M*; log(Ms/Msol)>10: sfrd_hiLUV_uvlfcorr.dat</li> </ul> <p>Full details of the binning and stacking methodology are explained in the paper.</p>
Darwin Core Archive: Santa Barbara Channel fish surveys at shallow regions of oil and gas platforms (SCUBA)
This dataset included fish counts that were surveyed in the shallow sections (0 – 40 meters) of the oil and gas platforms using Scuba. The oil and gas platforms are located in the Santa Barbara Channel, California, USA. Each of the eleven platforms (GILDA, GINA, HOLLY, IRENE, HERMOSA, HIDALGO, GAIL, GRACE, HARVEST, C, and HENRY) were surveyed multiple times a year from 1995 to 2000. This scuba project was conducted and reported under a cooperative agreement (Agreement 1445-CA09-95-0836) between the U. S. Geological Survey (Biological Resources Division) and the University of California, Santa Barbara. This dataset is formatted as a Darwin Core Archive (DwC-A, occurrence core). This is a derived data product and see provenance for the source data. Citation of report: Love, M. S., D. M. Schroeder, and M. M. Nishimoto. 2003. The ecological role of oil and gas production platforms and natural outcrops on fishes in southern and central California: a synthesis of information. U. S. Department of the Interior, U. S. Geological Survey, Biological Resources Division, Seattle, Washington, 98104, OCS Study MMS 2003-032. http://www.lovelab.id.ucsb.edu/Report.pdf These fish surveys at platforms were conducted within a few days of surveys at rock outcrops, which can be viewed at: https://portal.edirepository.org/nis/mapbrowse?scope=edi&identifier=112 The deeper sections of the oil platform were surveyed using the research submarine Delta; the data can be viewed at: https://portal. edirepository.edu/nis/mapbrowse?scope=edi&identifier=111
Underwater images collected by Scuba diving in Ifaty, Madagascar - 2023-05-07
<i>This dataset was collected by Scuba diving in Ifaty, Madagascar - 2023-05-07.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 2.66 GB of MP4 files, which were trimmed into 1056 frames (at 2997/1000 fps). <br> The frames are not georeferenced. <br> 93.75% of these extracted images are useful and 6.25% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> No GPS. <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://doi.org/10.5281/zenodo.15853010" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://doi.org/10.5281/zenodo.15228535" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Nosy-Ve, Madagascar - 2023-04-30
<i>This dataset was collected by Scuba diving in Nosy-Ve, Madagascar - 2023-04-30.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 1.5 GB of JPG files, which were trimmed into 267 frames (at 4 fps). <br> The frames are georeferenced. <br> 99.63% of these extracted images are useful and 0.37% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> No GPS. <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://doi.org/10.5281/zenodo.15853010" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://doi.org/10.5281/zenodo.15228535" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Nosy-Ve, Madagascar - 2023-04-30
<i>This dataset was collected by Scuba diving in Nosy-Ve, Madagascar - 2023-04-30.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 2.49 GB of JPG files, which were trimmed into 460 frames (at 4 fps). <br> The frames are not georeferenced. <br> 100.0% of these extracted images are useful and 0.0% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> No GPS. <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://doi.org/10.5281/zenodo.15853010" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://doi.org/10.5281/zenodo.15228535" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
The SCUBA-2 Cosmology Legacy Survey
<p>This dataset consists of 850um maps and a catalogue of the seven extragalactic survey fields of the SCUBA-2 Cosmology Legacy Survey (S2CLS): Akari-NEP, COSMOS, UKIDSS-UDS, Lockman Hole North, EGS, SSA22, GOODS-N. The data are described in Geach et al. (2016). The maps include match-filtered (MF) and non-match-filtered (NMF) flux density (calibrated in mJy/beam), instrumental rms (also in mJy/beam) and signal-to-noise ratio. The dataset also includes a catalogue of sources detected at a significance of >=3.5-sigma across the survey. This is Data Release 1. Contact: j.geach@herts.ac.uk for further details.</p>
Scuba diving cylinder comparison spreadsheet
<p>Editable spreadsheet with comparison of various scuba tanks: pressures, volumes, time at given depth, weight, buoyancy, sizes, prices, costs of filling. Visual of liters provided by various tanks. Comparison of strenghts and weaknesses of materials. Initially created to select back and deco gas tanks for sidemount diving.</p> <p>Version 7: buoy / tank to 50and 12 bar, buoy weight corrected to 1.5 kg for steel-carbon after test (still ascending below 50 bar), color by water, small corrections.</p>
Underwater images collected by Scuba diving in Hermitage, Réunion - 2021-03-10
<i>This dataset was collected by Scuba diving in Hermitage, Réunion - 2021-03-10.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> <h2>Image acquisition</h2> This session has 11.28 GB of MP4 files, which were trimmed into 1912 frames (at 1 fps). <br> The frames are georeferenced. <br> 80.02% of these extracted images are useful and 19.98% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> Base : No Base <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 0.0 %, Q2: 0.0 %, Q5: 100.0 % <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Hermitage, Réunion - 2021-03-17
<i>This dataset was collected by Scuba diving in Hermitage, Réunion - 2021-03-17.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> <h2>Image acquisition</h2> This session has 10.69 GB of MP4 files, which were trimmed into 1874 frames (at 1 fps). <br> The frames are not georeferenced. <br> 89.22% of these extracted images are useful and 10.78% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> Base : No Base <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 0 %, Q2: 0 %, Q5: 0 % <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Hermitage, Réunion - 2021-03-10
<i>This dataset was collected by Scuba diving in Hermitage, Réunion - 2021-03-10.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> <h2>Image acquisition</h2> This session has 4.87 GB of MP4 files, which were trimmed into 841 frames (at 1 fps). <br> The frames are georeferenced. <br> 70.51% of these extracted images are useful and 29.49% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> Base : No Base <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 0.0 %, Q2: 0.0 %, Q5: 100.0 % <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Hermitage, Réunion - 2021-01-13
<i>This dataset was collected by Scuba diving in Hermitage, Réunion - 2021-01-13.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> <h2>Image acquisition</h2> This session has 11.4 GB of MP4 files, which were trimmed into 5726 frames (at 2997/1000 fps). <br> The frames are not georeferenced. <br> 78.71% of these extracted images are useful and 21.29% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> Base : No Base <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 0 %, Q2: 0 %, Q5: 0 % <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Hermitage, Réunion - 2021-04-01
<i>This dataset was collected by Scuba diving in Hermitage, Réunion - 2021-04-01.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> <h2>Image acquisition</h2> This session has 26.89 GB of MP4 files, which were trimmed into 6430 frames (at 2997/1000 fps). <br> The frames are not georeferenced. <br> 90.14% of these extracted images are useful and 9.86% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> Base : No Base <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 0 %, Q2: 0 %, Q5: 0 % <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Hermitage, Réunion - 2021-04-01
<i>This dataset was collected by Scuba diving in Hermitage, Réunion - 2021-04-01.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> <h2>Image acquisition</h2> This session has 19.49 GB of MP4 files, which were trimmed into 10315 frames (at 2997/1000 fps). <br> The frames are georeferenced. <br> 86.67% of these extracted images are useful and 13.33% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> Base : No Base <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 0.0 %, Q2: 0.0 %, Q5: 100.0 % <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in Hermitage, Réunion - 2021-04-01
<i>This dataset was collected by Scuba diving in Hermitage, Réunion - 2021-04-01.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> <h2>Image acquisition</h2> This session has 34.85 GB of MP4 files, which were trimmed into 8331 frames (at 2997/1000 fps). <br> The frames are not georeferenced. <br> 46.95% of these extracted images are useful and 53.05% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> Base : No Base <br> Device GPS : Emlid Reach M2 <br> Quality of our data - Q1: 0 %, Q2: 0 %, Q5: 0 % <br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in St-Gilles, Réunion - 2015-06-11
<i>This dataset was collected by Scuba diving in St-Gilles, Réunion - 2015-06-11.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> Underwater Images Collected by Scuba Diving in Réunion Island during the Hyscores Project. <br> For more details, visit the <a href="https://archimer.ifremer.fr/doc/00350/46122/" target="_blank">Hyscores Project</a>.<br><br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> <br> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in La-Saline, Réunion - 2015-06-16
<i>This dataset was collected by Scuba diving in La-Saline, Réunion - 2015-06-16.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> Underwater Images Collected by Scuba Diving in Réunion Island during the Hyscores Project. <br> For more details, visit the <a href="https://archimer.ifremer.fr/doc/00350/46122/" target="_blank">Hyscores Project</a>.<br><br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> <br> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
Underwater images collected by Scuba diving in St-Gilles, Réunion - 2015-12-10
<i>This dataset was collected by Scuba diving in St-Gilles, Réunion - 2015-12-10.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br> Underwater Images Collected by Scuba Diving in Réunion Island during the Hyscores Project. <br> For more details, visit the <a href="https://archimer.ifremer.fr/doc/00350/46122/" target="_blank">Hyscores Project</a>.<br><br> <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> <br> All the raw data was processed using our <a href="https://github.com/SeatizenDOI/plancha-workflow/releases/tag/v1.0.3" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://github.com/SeatizenDOI/plancha-inference/releases/tag/v1.0.0" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
SCUBA-2 Large eXtragalactic Survey: XMM-LSS field
<p>This dataset consists of 850um maps and a catalogue for the SCUBA-2 Large eXtragalactic Survey (S2LXS) of the XMM-LSS field. The data are described in Garratt et al. (2023), <a href="https://arxiv.org/abs/2301.10801">https://arxiv.org/abs/2301.10801</a>. We include match-filtered (MF) and non-match-filtered (NMF) flux density (calibrated in mJy/beam), instrumental rms (also in mJy/beam) and signal-to-noise ratio maps. The dataset also includes a catalogue of sources detected at a significance of >=5.0-sigma in the survey. This is Data Release 1. Contact: t.garratt@herts.ac.uk for further details.</p>
Fig. 2. Scuba diver using a in Are Abrolhos no-take area sites of naïve fish? An evaluation using flight initiation distance of labrids
Fig. 2. Scuba diver using a wooden handle to simulate the spearfisher behavior.
Underwater images collected by Scuba diving in Nosy-Ve, Madagascar - 2023-04-30
<i>This dataset was collected by Scuba diving in Nosy-Ve, Madagascar - 2023-04-30.</i> <br> <br><br>Underwater or aerial images collected by scientists or citizens can have a wide variety of use for science, management, or conservation. These images can be annotated and shared to train IA models which can in turn predict the objects on the images. We provide a set of tools (hardware and software) to collect marine data, predict species or habitat, and provide maps.<br><br> This dataset is part of larger collection referencing numerous underwater and aerial images <a href="https://doi.org/10.5281/zenodo.11125847" target="_blank">Seatizen Altas</a>. Methods, tools and scientific objectives are also described in a dedicated data paper.<br> <h2>Image acquisition</h2> This session has 0.07 GB of MP4 files, which were trimmed into 35 frames (at 2997/1000 fps). <br> The frames are not georeferenced. <br> 82.86% of these extracted images are useful and 17.14% are useless, according to predictions made by <a href="jacques-v0.1.0_model-20240513_v20.0" target="_blank">Jacques model</a>. <br> Multilabel predictions have been made on useful frames using <a href="https://huggingface.co/lombardata/DinoVdeau-large-2024_04_03-with_data_aug_batch-size32_epochs150_freeze" target="_blank">DinoVd'eau</a> model. <br> <h2> GPS information: </h2> No GPS. <h2> Generic folder structure </h2> YYYYMMDD_COUNTRYCODE-optionalplace_device_session-number <br> ├── DCIM : folder to store videos and photos depending on the media collected. <br> ├── GPS : folder to store any positioning related file. If any kind of correction is possible on files (e.g. Post-Processed Kinematic thanks to rinex data) then the distinction between device data and base data is made. If, on the other hand, only device position data are present and the files cannot be corrected by post-processing techniques (e.g. gpx files), then the distinction between base and device is not made and the files are placed directly at the root of the GPS folder. <br> │ ├── BASE : files coming from rtk station or any static positioning instrument. <br> │ └── DEVICE : files coming from the device. <br> ├── METADATA : folder with general information files about the session. <br> ├── PROCESSED_DATA : contain all the folders needed to store the results of the data processing of the current session. <br> │ ├── BATHY : output folder for bathymetry raw data extracted from mission logs. <br> │ ├── FRAMES : output folder for georeferenced frames extracted from DCIM videos. <br> │ ├── IA : destination folder for image recognition predictions. <br> │ └── PHOTOGRAMMETRY : destination folder for reconstructed models in photogrammetry. <br> └── SENSORS : folder to store files coming from other sources (bathymetry data from the echosounder, log file from the autopilot, mission plan etc.). <br> <h2> Software </h2> All the raw data was processed using our <a href="https://doi.org/10.5281/zenodo.15853010" target="_blank">worflow</a>. <br>All predictions were generated by our <a href="https://doi.org/10.5281/zenodo.15228535" target="_blank">inference pipeline</a>. <br>You can find all the necessary scripts to download this data in this <a href="https://github.com/SeatizenDOI/zenodo-tools" target="_blank">repository</a>. <br>Enjoy your data with <a href="https://github.com/SeatizenDOI" target="_blank">SeatizenDOI</a>! <br>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.