Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
24
datasets available to search
ShareScore release 0.9.0
Dataset results
24 results for “Soil reflectance”
Initial Sample of HYPERNETS Hyperspectral Surface Reflectance Measurements for Satellite Validation from the Bare soil at Marquardt, Germany
<p>The HYPERNETS project (www.hypernets.eu) aims to ensure that high-quality in situ measurements are available to support the (VNIR/SWIR) optical Copernicus products. Therefore, it established a new autonomous hyperspectral spectroradiometer (HYPSTAR® - www.hypstar.eu) dedicated to land and water surface reflectance validation with instrument-pointing capabilities. In the prototype phase, the instrument is being deployed at 24 sites covering a range of water and land types and a range of climatic and logistic conditions. This dataset provides the first published data for the ATB HYPERNETS site in Marquardt, Germany [52°27'59.40"N, 12°57'35.16"E] (ATGE). It is a subset of the complete data record, consisting of the measurements which could be used for satellite validation. </p> <p>The provided NetCDF files are the L2A hypernets products with surface reflectances, their associated uncertainties and error-correlation information. The reflectance in the L2A products is the Hemispherical-directional Reflectance Factor (HDRF) defined as HDRF = π L / E where L is the directional upwelling radiance (with the field o, view of 5 dgrees), and E is the (hemispherical) downwelling irradiance (i.e. including both direct solar and diffuse sky irradiance). These reflectances have dimensions of wavelength and series, where each series is a set of measurements for a given geometry (combination of viewing zenith and azimuth angle). In addition to variables for wavelength and bandwidth, the files also contain variables that provide for each series the acquisition time, viewing and solar angles, number of valid scans used, and quality flags (typically, no flags are set in the data provided in this dataset). These NetCDF files also contain further relevant metadata as attributes. See https://hypernets-processor.readthedocs.io/ for further info.</p> <p>The HYPSTAR®-XR sensor was installed on 11 Oct 2022 at the top of a 5m mast on an extended 5 m horizontal boom to minimise interruption of the field of view. The boom faces South at the right angle towards bare soil. The mast is located at 52.466778°N, 12.959778°E. Data are collected every 30 minutes between 9:00 and 17:00 (UTC) from different zenith and azimuth angle.</p> <p>The HYPSTAR®-XR (eXtended Range) instruments deployed at each land HYPERNETS site consist of a VNIR and a SWIR sensor and autonomously collect data between 380-1700 nm at various viewing geometries and send it to a central server for quality control and processing. The VNIR sensor spans 1330 channels between 380 and 1000 nm with a FWHM of 3 nm, and the SWIR sensor has 220 channels between 1000 and 1700 nm with a FWHM of 10 nm. The hypernets_processor (Goyens et al. 2021; De Vis et al. in prep.) automatically processes all this data into various products, including the L2A surface reflectance product provided here. All products have associated uncertainties (divided into random and systematic uncertainties, including error-correlation information) which were propagated using the CoMet toolkit (www.comet-toolkit.org). </p> <p>To obtain this dataset, we start from the full ATGE data record and omit all the data that do not pass all quality checks performed as part of the hypernets_processor. In addition, an additional screening procedure was also developed to remove outliers and supply the best quality data suitable for satellite validation. To remove the outliers, a sigma-clipping method is used. First, reflectances are extracted in separate 2-hour windows throughout the day (to account for BRDF differences due to different solar positions) for four different wavelengths (500, 900, 1100 and 1600 nm). Outliers in these reflectances are then identified by iteratively calculating the mean reflectance trend with time (by binning the data per maximum of 30 data points), calculating the standard deviation from this trend, and masking any data that is more than three standard deviations away from the trend. This process is repeated on the unmasked data until the standard deviation does not vary by more than 5% between two iterations. The masks for the four different wavelengths are then combined (keeping only measurements for which none of the four wavelengths is an outlier). The reflectances and associated uncertainties for any masked series (i.e. a geometry that is masked either by the sigma-clipping procedure or from the masks of the hypernets_processor) are replaced by NaNs. Any sequence that has more than half of its series masked is removed entirely. </p>
Soil characteristics and spectral reflectance data of six agricultural fields in Switzerland
<p>Soil characteristics and spectral reflectance data of six agricultural fields in Switzerland collected within the EJP Soil project STEROPES. The data in the .csv files is organized as relational database with the database schema depicted in DB_Schema.pdf. The file headers (marked with #) contain metadata.</p>
Hyperspectral reflectance values and biophysicochemical properties of biocrusts and soils in the Fryxell Basin, McMurdo Dry Valleys, Antarctica (2019)
This data package includes ecological parameters of biocrust and soil from samples collected in-situ within the Lake Fryxell Basin of the McMurdo Dry Valleys, Antarctica during December of 2019. Parameters include biological (ash-free dry mass, pigment concentration, and counts of soil invertebrates), physical (water content, electrical conductivity, and pH), and chemical properties (inorganic nitrogen, inorganic phosphorous, total nitrogen, and total organic carbon) of the surface soil, biocrust, and underlying soil. This data package also contains reflectance measurements of biocrust, soil, and granite samples acquired in a laboratory using a hyperspectral spectrometer. Included are hyperspectral reflectance measurements of a laboratory study using a variety of mixtures of soil and biocrust (0 – 100% biocrust), as well as reflectance measurements of individual grab samples collected from each of the field plots. These data aid our understanding of the ecological structure and functioning of biocrust microhabitats as well as the location of these communities throughout the Lake Fryxell Basin. This work also aims to assist in understanding the carbon budget of the basin and highlight the importance of these snowpack-fed biocrust communities, which are understudied but likely an important piece of the overall carbon budget in this region.
Biophysicochemical properties and hyperspectral reflectance values of biocrust and soil samples, Fryxell Basin, McMurdo Dry Valleys, Antarctica (2022)
This data package includes biophysicochemical properties of biocrust and soil samples collected in-situ within the Lake Fryxell basin of the McMurdo Dry Valleys, Antarctica during December 2022 at 64 different terrestrial locations. These parameters include biological (ash-free dry mass, pigment concentration, soil invertebrate counts), physical (gravimetric water content, electrical conductivity, pH), and chemical (inorganic nitrogen, inorganic phosphorous, total nitrogen, soil organic carbon) properties of the surface soil, biocrust, and underlying soil. This package also contains reflectance measurements of individual grab samples of biocrust, soil, and rock collected from each of the field sites, acquired in a laboratory using a hyperspectral spectrometer. Additionally, this package contains parameters derived solely from geospatial data for each of the field sites, including aspect, slope, elevation, gravimetric water content, and snow frequency. These data were used to model habitat suitability of biocrusts in the Fryxell Basin using both in-situ field survey data and geospatial parameters. They aid in our understanding of the ecology of biocrust communities, where they are located throughout the Fryxell basin, and the structure and functioning of these microhabitats as well as improving understanding of the regional carbon budget. These data also highlight the importance of snow patch-associated biocrust communities, which are understudied but likely an important piece of the overall carbon budget in this region.
Munsell soil color chart: a spectral reflectance dataset
<p>This dataset contains the calculated spectral reflectance of the 2009 edition of Munsell soil colour chart measured using Konika Minolta 2000 spectroradiometer with a tungsten lamp as the light source. The spectroradiometer has a 380-780nm spectral range with a 1nm spectral sampling.</p> <p>Reflectance is obtained by using the following equation with the assumption of a uniformly-illuminated surface.<br> <span class="math-tex">\(R(\lambda) = \frac{\Phi(\lambda)_{Reflected}}{\Phi(\lambda)_{Incident}} \)</span></p> <p><span class="math-tex">\( \Phi(\lambda)_{Incident} = \frac{\Phi(\lambda)_{sample}}{R(\lambda)_{sample}} \)</span><br> using a known <span class="math-tex">\(R(\lambda)\)</span> of white reference tile used to obtain <span class="math-tex">\(\Phi(\lambda)_{Incident}\)</span> of the tungsten lamp.</p> <p> </p> <p>If you have any questions regarding this dataset, kindly contact me on riestiya.z.fadillah@ntnu.no</p>
Laboratory-based hyperspectral visible near-infrared reflectance spectral dataset of soil samples across a range of surface orientations
Open the record for dataset details and reuse information.
Supplementary Data for Remote soil moisture measurement from drone-borne reflectance spectroscopy: Applications to hydroperiod measurement in desert playas
<p>This supporting dataset includes:</p> <p>• Ground-based reflectance measurements for the two plume-crossing transects (AHT3 and AHT4). Data show reflectance by wavelength at each scan position.</p> <p>• Reduced data records (RDR) showing GPS position data for the drone and the associated reflectance measurement, by wavelength, averaged over 1 second intervals for the three mapping sorties, AHS4, 5, and 7.</p> <p>• The sample datasheet showing ground-based and lab-base measurements of the sampling transects.</p>
Fourier transformed infrared reflectance (FTIR) spectra of peat soils collected from the top and bottom of peatland erosion gullies
<p>Peat soil was randomly collected from gullies within two eroding blanket bogs. Balmoral (BAM) is on a large high-altitude plateau blanket bog in the eastern part of the Cairngorms National Park, Scotland, UK (56.93° N, − 3.16° E, 642 m asl) and Glensaugh (GSA) is an upland livestock farm with sections of and blanket bog peatland in the Grampian foothills (56.55° N, 2.33° E, 412 m asl). Both sites have undergone extensive degradation and peat erosion, and both have, in some parts, recently undergone restoration practices, including bunding and reprofiling.</p> <p>Peat samples were collected at Glensaugh and Balmoral as follows. At Glensaugh, peat at the top 1 cm of exposed gully sides (approximately 10-20cm from the vegetated surface) and at the gully bottom were taken, air dried and passed on for FTIR analysis. These gullies correspond to four erosion pin measurement areas and their corresponding peat sediment trap areas at Glensaugh. At Balmoral, the same approach was taken except six ‘gully top’ and ‘gully bottom’ sites were randomly selected and not geographically paired in the same way at Glensaugh.</p> <p>Samples were air dried and finely ball milled, prior to FTIR analysis. FTIR spectra were recorded using a Bruker Vertex 70 FTIR spectrometer (Bruker, Ettlingen, Germany) and OPUS 7.2 software. To record the FTIR spectra, each of the samples were placed, in turn, on a Diamond Attenuated Total Reflectance (DATR) sampling accessory, with a single reflectance system. Data points in the range of 4000-400 cm-1 were recorded with a resolution of 4 cm-1 and average of 64 scans. A spectrum of the empty sampling accessory, with the same resolution and number of scans, was recorded as the background spectrum before each measurement. </p> <p>Since the penetration depth for the DATR accessory is different for each wavelength and is directly proportional to the wavelength of the incident light (The higher the wavenumber the lower the penetration), an ATR correction was applied to the spectra to correct this effect, using the OPUS software. No correction was required for water vapour and CO2 as the spectrometer is continuously purged with dry air.</p> <p> </p> <p>In the dataset, columns correspond to the following:</p> <p>Site: Balmoral or Glensaugh</p> <p>Gully Position: Top or bottom</p> <p>Gully Number: Replicate gullies within the site</p> <p>Sample date: Date</p> <p>Sample ID: Unique identifier</p> <p>Remaining columns: Reflectance at a given wavelength</p>
Exploring the impact of varied background on quantification of soil carbon content using microwave and millimeter wave signal reflectance
<p>The quantification of soil carbon content is paramount to the advancement of soil carbon management practices, serving as the bedrock for the development and implementation of various carbon-negative and carbon-neutral technologies. These technologies are crucial in the battle against climate change and in enhancing soil health to boost agricultural productivity. Therefore, we employ an innovative sensor technology comprised of a compact array, including 18 pairs of radar transmitters (TX) and receivers (RX) within a microwave radar array sensor, alongside a configuration of 20 TX and 20 RX pairs in a millimeter wave radar array sensor. For this kind of setup to work, the sensors need to be carefully tested to make sure they can capture changes in the soil's carbon content over time and space.</p> <p>This dataset presents an exhaustive series of raw data aimed at evaluating the efficacy of these two sensor technologies in detecting soil carbon content. A distinctive aspect of this study is the examination of sensor performance across four divergent backgrounds—glass, metal, sponge, and wood surfaces—to ascertain the influence of background material on radar wave reflectance and, consequently, measurement accuracy. Furthermore, the investigation extends to the analysis of sensing distance as a critical parameter for classification accuracy, with the microwave radar array sensor tested across distances ranging from 1 inch to 4 inches and the millimeter wave radar sensor evaluated at intervals of 2.5 inches, 5 inches, 7.5 inches, and 10 inches. By providing a comprehensive dataset on the performance evaluation of cutting-edge sensor technologies, this study aims to facilitate further advancements in the field of soil carbon management, ultimately supporting the global effort to combat climate change through innovative and sustainable agricultural practices.</p>
Using spectral reflectance and random forest method for modeling soil surface changes induced by simulated rainfall - datasets
<p>Using spectral reflectance and random forest method for modeling soil surface changes induced by simulated rainfall - datasets</p> <p>The impact of simulated rainfall on the soil surface roughness of different soil types with various initial surface states and the differences between their spectral characteristics were studied under laboratory conditions. The soil samples were collected from a horizon of fields near Poznań, western Poland. The physical and physicochemical properties of each soil sample were determined. Then, the part of the soil materials, consisting of natural aggregates, were used to form three soil surface roughness. </p> <p>An explanation of the table column names in the “soils properties.csv” file:</p> <p> </p> <ul> <li> <p>“textural classification” - Name of the granulometric group. Soil texture was determined by the hydrometer method according to standard PN-R-04032.</p> </li> <li> <p>“sand” - Sand content in the soil sample in %.</p> </li> <li> <p>“silt” – Silt content in the soil sample in %.</p> </li> <li> <p>“clay” – Clay content in the soil sample in %.</p> </li> <li> <p>pHH2O” - The pH of the soil sample determined in water. The soil pH was determined by the potentiometry method.</p> </li> <li> <p>“pHKCl” – The pH of the soil sample determined in KCl. The soil pH was determined by the potentiometry method.</p> </li> <li> <p>“SOC” – Organic matter content in soil was determined by oxidation titration using K2Cr2O7 with H2SO4 on the block mineralization.</p> </li> </ul> <p> </p> <p>An explanation of the table column names in the “rainfall doses.csv” file:</p> <p> </p> <ul> <li> <p>“rainfall simulation” - Rainfall simulation number.</p> </li> <li> <p>“rainfall dose” - One-time amount of rainfall dose expressed in millimeters.</p> </li> <li> <p>“accumulated rainfall” – Summation of rainfall after each successive dose expressed in millimeters.</p> </li> </ul> <p> </p> <p>An explanation of the table column names in the “soil measurements” file:</p> <p> </p> <ul> <li> <p>“textural classification” - Name of the granulometric group. Soil texture was determined by the hydrometer method according to standard PN-R-04032.</p> </li> <li> <p>“rainfall simulation” - Rainfall simulation number.</p> </li> <li> <p> “reflectance” - The amount of radiation reflected from the soil surface under the influence of successive rainfalls and expressed in nanometres. </p> </li> <li> <p>“roughness state” - The size of the roughness: R1 is the lowest soil roughness state, R2 represents medium soil roughness, and R3 represents the greatest roughness.</p> </li> <li> <p>“T3D” - Tortuosity index is a surface roughness index. It was calculated from DEM (Digital Elevation Model). It expresses the ratio between the true surface of DEM and its flat horizontal area.</p> </li> <li> <p>“HSD” - Height Standard Deviation is the second surface roughness index. It was calculated from DEM and expressed in millimeters. </p> </li> </ul> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p> </p> <p><br> </p> <p> </p>
Spectral data associated to the publication: "Reflectance study of ice and Mars soil simulant associations—II. CO2 and H2O ice" by Z. Yoldi et al. (Icarus 386, 2022)
<p>This is the complete set of experimental VIS-NIR reflectance data collected by Z. Yoldi and co-authors for the article "Reflectance study of ice and Mars soil simulant associations—II. CO2 and H2O ice" published in Icarus 386 (2022). doi: https://doi.org/10.1016/j.icarus.2022.115116.</p> <p>A pre-print of the article is also freely available on ArXiv:</p> <p>https://arxiv.org/abs/2207.13905</p> <p>The article provides the methodology for the spectral aquisitions, discussion of the errors and uncertainties, analysis of the spectra and implications for the composition of Solar System surfaces.</p> <p>The spectral data are organised in folders corresponding to the different types of experiments detailed in the article. In case both hyperspectral and multispectral data were acquired, they are organised in subfolders.</p> <p>The spectral files inside these folders and subfolders have the following naming convention:</p> <p>spectrum_YYYYMMDD_experiment_name_TYPE_XX_YYY.csv</p> <p>Where TYPE is either multi (multispectral) or hyper (hyperspectral), XX indicates different samples within the experiment (see paper, figures and tables) and YYY is a sequential number in case of a temporal evolution (sublimation experiment in "20180207_ternary_mixture" with 12 timesteps).</p> <p> The files are in csv format (columns separated by comma) and the content of each column is indicated in the first line (header).</p>
Exploring the impact of varied background on quantification of soil carbon content using microwave and millimeter wave signal reflectance
Open the record for dataset details and reuse information.
Microwave and millimeter wave signals reflectance of soil carbon content
Open the record for dataset details and reuse information.
UV Reflectance of Spacecraft Materials and Analog Soils: Implications for Bioburden Reductions on the Undersides of Mars Rovers
<p><strong>Abstract</strong></p><p>The Mars Sample Return mission architecture will utilize three spacecraft to collect, cache, recover, launch, and return to Earth a diversity of regolith and rock samples. However, no comprehensive Mars Microbial Survival (MMS) model currently exists. As an initial effort in building a MMS model, we examined the UV reflectance of 15 spacecraft materials and seven Mars analog soils within the context of the Perseverance mission. Data were used to predict the times required to achieve one lethal dose (syn., Sterility Assurance Level [SAL]; def. as a bioburden reduction of ‒12 logs). Results suggest that a single SAL dosage of UVC was achieved on exposed surfaces on the upper deck of Perseverance within a few hours to a few sols post-landing at Jezero Crater. The overall average for UVC reflectance from spacecraft materials was approx. 10%. The overall UVC reflectance from Mars analog soils was measured at 1.3%. The Adaptive Caching Assembly (ACA) on Perseverance is located on the forward edge of the underbelly of the spacecraft. Modeling of the accumulated UVC dosage for the ACA yielded a prediction of reaching one SAL for downward facing surfaces at 93 sols that receive 'single bounce' UVC photons from the local terrain. The SAL increases to 930 sols, if an additional '<i>bounce</i>' of the solar UV irradiation is required to reach a partially protected site in the ACA hardware. The current study is the first to report on the UVC reflectance from a diversity of spacecraft materials. </p>
EJP SensRes bi-directional reflectance of soils
<div> <p><span><span>Repository of the </span></span><span><span>d</span></span><span><span>atabase of bi-directional soil spectral </span></span><span><span>reflectance </span></span><span><span>measurements and </span></span><span><span>the </span></span><span><span>corresponding </span><span>physico</span></span><span><span>-</span></span><span><span>chemical variables for soil carbon estimation. </span></span></p> </div> <div> <p><span><span>Soil samples from the chemistry laboratory </span></span><span><span>were</span></span><span><span> prepared for the spectral measurements</span></span><span><span> that were carried ou</span></span><span><span>t</span></span><span><span> using a </span></span><span><span>full-range </span></span><span><span>PSR-3500 </span></span><span><span>spectrometer</span></span><span><span> in the range 350-2500 nm</span></span><span><span>.</span></span> <span><span>The spectral sensor was mounted on a robotic arm to perform a regular </span></span><span><span>sampling strategy involving multiple</span></span><span><span> viewing</span></span><span><span> angles and different soil water contents</span></span><span><span>. </span></span><span> </span></p> </div> <div> <p><span><span>Three main datasets were </span></span><span><span>compiled,</span></span><span><span> and they </span></span><span><span>are</span></span><span><span> summarized in Table 1 in the related .doc document</span></span><span><span>. </span></span></p> </div>
Dataset for "Co-alignment of Laboratory and In-Situ Reflectance Spectra of Chang'e-5 Lunar Soil"
<p>This dataset provides the reflectance data measured in the laboratory for the <45-μm, 45-355-μm fractions, and bulk soil sample, respectively.</p>
Data from: Canopy spectral reflectance as a predictor of soil water potential in rice
Open the record for dataset details and reuse information.
Distribution patterns of fungal taxa and inferred functional traits reflect the non-uniform vertical stratification of soil microhabitats in a coastal pine forest
Open the record for dataset details and reuse information.
Data from: High-throughput amplicon sequencing of rRNA genes requires a copy number correction to accurately reflect the effects of management practices on soil nematode community structure
Open the record for dataset details and reuse information.
Data from: No evidence that plant-soil feedback effects of native and invasive plant species under greenhouse conditions are reflected in the field
Plant–soil feedback (PSF) may affect above-ground higher trophic levels in glasshouse experiments, but evidence from field studies on the relevance of these multitrophic interactions for plant performance is lacking. Therefore, we examined whether PSF effects of several native and invasive plant species occur also in the field and influence plant damage by above-ground herbivores. Root zone soil from an abandoned urban field was used as inocula for the PSF experiment. First, we grew eight urban grassland plant species (five natives and three invasive species) separately in a glasshouse, with soil biota communities conditioned by the respective species itself ('home soil') or by a mixture of all other species ('foreign soil'). After 13 weeks, one cohort of the plants was placed on an urban field in Berlin to assess damage by naturally colonizing herbivores, while another cohort of the plants stayed in the glasshouse. We observed that the extent of the PSF effects differed between the field and glasshouse cohorts of plants. While we found positive PSF responses for five of the eight plant species in the glasshouse, we found no PSF effects in the field. Further, there was no trend that invasive or native species differed in the direction or extent of PSF responses. Concerning the leaf damage by herbivores of the field plants, we found no evidence that the soil history (home vs. foreign soil) affected the effects of above-ground herbivores on the plants. Synthesis. We conclude that PSF effects are more likely to be found under glasshouse conditions. In the field, PSFs seem to play a minor role for the selected urban grassland species. More generally, our study highlights the need to focus on PSFs under natural conditions and in natural communities (including higher trophic levels), which is often overlooked in PSF research.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.