Skip to main content
ConductScienceScienceDex
Powered by ShareScore

Find research datasets worth reusing

Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.

264

datasets available to search

ShareScore release 0.9.0

Reset

Dataset results

264 results for “Ti”

Learn how ShareScore rates datasets ↗
zenodo48/100

Hail Event on 2022-06-28 in Locarno-Monti (TI), Switzerland: Drone Photogrammetry Imagery, Mask R-CNN Model and Analysis Data of Hailstones

<p>This hail data collection belongs to a drone hail survey performed on 2022-06-28 in Locarno-Monti (TI, Switzerland). The supercell reached the location around 07:50 UTC in the morning. Only one photogrammetry flight could be performed and thus no estimation of the hail melting process is available. The orthophoto is masked to ignore parts where detection of hail is unwanted.</p> <p>&nbsp;</p> <p>Expert 1 (lai, mlainer), Expert 2 (jtm), Expert 3 (por, jportmann)</p>

opencc-by-4.0Sep 2024View details →
zenodo44/100

Synchrotron Diffraction During Stress Relaxation in CP Ti (grade 4)

<p>These data support the associated paper:</p> <p><strong>Cold Creep of Titanium: Analysis of stress relaxation using synchrotron diffraction and crystal plasticity simulations</strong><br> Yi Xiong, Phani Karamched, Chi-Toan Nguyen, David M Collins, Christopher M Magazzeni, Edmund Tarleton, Angus J Wilkinson<br> Acta Materialia (2020) vol. 199, 561-577<br> <a href="https://doi.org/10.1016/j.actamat.2020.08.010">https://doi.org/10.1016/j.actamat.2020.08.010</a></p> <p>The Authors&#39; Accepted Manuscript version of the paper is available open access on arXiv:<br> <a href="https://arxiv.org/ftp/arxiv/papers/2003/2003.01682.pdf">https://arxiv.org/ftp/arxiv/papers/2003/2003.01682.pdf</a></p> <p>&nbsp;</p> <p>This dataset arises from an in situ stress relaxation experiment on commercially pure&nbsp;(grade 4) Ti undertaken at the&nbsp;Diamond Light Source, beamline&nbsp;ID12, as part of experiment&nbsp;EE17222.&nbsp; The sample was loaded to just beyond the yield point, and then held at constant strain for 5 minutes over which time the stress relaxed.&nbsp; The sample was then reloaded elastically and a further period of stress relaxation at fixed total strain undertaken.&nbsp; in total five periods of stress relaxation were imposed.</p> <p>Throughout the mechanical testing cycle powder diffraction patterns were recorded in the transmission geometry,&nbsp;at 1 second intervals using a 2d Pixium detector held 1097 mm from the sample.&nbsp; The beam energy was determined to be 79.79 keV.&nbsp;</p> <ul> <li>Diffraction Patterns are contained as 16 bit TIF files bundled into the Patterns_72995.zip file.</li> <li>Macroscopic mechanical test data are in the excel file MechTest_2995.xlsx.</li> <li>Small EBSD map in #.ctf format converted from Bruker #bcf file in&nbsp;CPg4.ctf file.</li> <li>Matlab + MTEX script to load and make simple plots from EBSD data file in&nbsp;CPg4Ti_EBSDmap.m file.</li> </ul> <p>&nbsp;</p> <p>Details of the MTEX orientation analysis package from Matlab can be found and freely downloaded at:<br> <a href="https://mtex-toolbox.github.io/">https://mtex-toolbox.github.io/</a></p> <p>&nbsp;</p> <p>&nbsp;</p>

opencc-by-4.0Jul 2020View details →
zenodo44/100

Raw data for article "In Situ Synchrotron X-Ray Diffraction Characterization of Corrosion Products of a Ti-Based Metallic Glass for Implant Applications" Gostin et al 2018

<p>This repository contains raw data for the article &quot;In Situ Synchrotron X-Ray Diffraction Characterization of Corrosion Products of a Ti-Based Metallic Glass for Implant Applications&quot; by Gostin et al. 2018 in Advanced Healthcare Materials, 7, 1800338 (https://doi.org/10.1002/adhm.201800338).</p> <p>Most data comes from one beamtime at the Diamond synchrotron in the UK in May 2016.&nbsp; It consists of X-ray diffraction images taken in situ in artificial corrosion pits on a Ti-based metallic glass.</p> <p>Please see the README file for more details.</p>

opencc-by-4.0Nov 2020View details →
zenodo44/100

Fundamental hydrogen storage properties of TiFe-alloy with partial substitution of Fe by Ti and Mn - Dataset related to publication

<p>Data type: Experimental measurements,&nbsp;correlations and Van&#39;t Hoff plot. Date format: .opj. Origin of the data: Experimental pressure composition isotherm measurements. Data generated by a home-made Sieverts&rsquo; type apparatus from CNRS, ICMPE, Thiais, France. Software needed to plot the data: Origin.</p>

opencc-by-4.0Dec 2019View details →
zenodo44/100

Contour method dataset for as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components

<p>This is an archive of the raw metrology of the EDM cut surface data files used for the contour method analysis of Wire+Arc Additive Manufacture (WAAM) Ti6Al4V components appearing in: &quot;Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti&ndash;6Al&ndash;4V components&quot; by F. Martina, M. J. Roy, B. A. Szost, S. Terzi, P. A. Colegrove, S. W. Williams, P. J. Withers, J. Meyer and M. Hofmann.</p> <p>The files are described by their filenames and side of each EDM cut. For example, &#39;Control_1.dat&#39; refers to one side of the cut performed on the as-deposited specimen, while &#39;50kN_1.dat&#39; refers to one side of a specimen rolled at 50 kN load, etc.</p> <p>Data is in the form of a point cloud with one point per line, whitespace delimited in microns. Data was captured with a Nanofocus CF-4 laser profilometer sensor with point spacing 30 &micro;m apart. Data with z coordinates below or above 500 &micro;m are considered outside of the surface detection limits.</p>

opencc-zeroMay 2016View details →
zenodo44/100

Lamellar and Bi-Modal Ti-64 Microstructure Images

<p>A collection of 40 optical micrographs of Titanium-64, taken from different regions of a forged billet. The images comprise two morphologies, bi-modal and lamellar. The first 20 images (Ti64_0.jpg - Ti64_19.jpg) correspond to the bi-modal morphology. The remaning 20 images (Ti64_20.jpg - Ti64_39.jpg) corrrespond to lamellar.</p> <p>This dataset was comprised to test machine learning algorithms for classification of microstructures.</p>

opencc-by-4.0Nov 2021View details →
zenodo44/100

A compilation of experimental data on the mechanical properties and microstructural features of Ti-alloys

<p>A compilation of mechanical properties of 282 distinct multicomponent Ti-based alloys. The majority of the data was published in high-quality journals after 2010 (&asymp;84%) and concerns alloys produced via an ingot metallurgy route, followed by solubilization and water quench (&asymp;58%), considered a standard condition for &beta;-Ti alloys. The dataset includes the chemical composition (in at.%), phase constituents, Young modulus, hardness, yield strength, ultimate strength, and elongation, among other relevant features. The authors established a blind-review procedure for 1/3 of the dataset to mitigate human error during data extraction.</p> <p>Files:</p> <ul> <li><strong>dax-ti-static.csv</strong>: static version of the dataset; can be easily imported into your preferred data processing software.</li> <li><strong>table1-static.md</strong>: detailed description of properties and additional fields included in the database; requires *markdown extra*&nbsp;syntax;</li> <li><strong>utils.py</strong>: a&nbsp;helper script to load and filter desired entries; dependencies are matplotlib (3.4.3+), numpy (1.21.2+), and pymatgen (2022.0.16+).</li> </ul> <p>For more information, please visit <strong>https://gitlab.com/comari/dax-ti</strong>.</p>

opencc-by-4.0Nov 2021View details →
zenodo44/100

In-situ neutron diffraction during reversible deuterium loading in Ti-rich and Mn-substituted Ti(Fe,Mn)0.90 alloys - Dataset related to publication

<p>Data type: resume of Rietveld refinement outputs and original refinements</p> <p>Date format: .zip,&nbsp;.opj;&nbsp;&nbsp;.xlsm, .dat,&nbsp;.pcr&nbsp;(Software FullProf&nbsp;package outputs), .inp&nbsp;(Software Topas package outputs)</p> <p>Origin of the data:&nbsp;neutron diffraction patterns from ILL and ISIS, and manual Sievert measurements (PCI curves from home-made Sieverts&rsquo; type apparatus from CNRS, ICMPE, Thiais, France)</p> <p>Software needed to plot the data: folders need to be unzipped, Origin, FullProf package and Topas package.</p>

opencc-by-4.0Jun 2022View details →
zenodo44/100

Synchrotron X-ray Diffraction Analysis - Measuring Bulk Crystallographic Texture from Differently-Orientated Ti-6Al-4V Samples

<p>A dataset of synchrotron X-ray diffraction (SXRD) analysis files, recording the refinement of crystallographic texture from six differently orientated Ti-6Al-4V (Ti-64) samples. Two different refinement methods were used to fit a range of diffraction pattern ring intensities, for determining crystallographic texture in both &alpha; (hexagonal close packed, hcp) and &beta; (body-centred cubic, bcc) phases. The first procedure was based on an established Rietveld refinement method, using the software package <a href="https://maud.radiographema.eu">MAUD (Materials Analysis Using Diffraction)</a>. The second procedure uses a new Fourier-based peak fitting method from the <a href="https://pypi.org/project/continuous-peak-fit/">Continuous-Peak-Fit</a>&nbsp;Python package. Both methods were used to calculate texture from each of the six different sample orientations, a combination of the six sample orientations, and in a batch processing method for calculating spatially-resolved texture variation from 387 individual X-Y stage-scan SXRD measurements across one of the samples.</p> <p><strong>Material</strong></p> <p>The Ti-64 material used in this study was pre-rolled to 87.5% reduction at 915&ordm;C and then air-cooled to develop a characteristic texture. Six different rectangular samples were cut from this material and are referenced according to alignment with the original rolling directions (RD &ndash; rolling direction, TD &ndash; transverse direction, ND &ndash; normal direction), and alignment with the horizontal (X) and vertical (Y) axes of the synchrotron detector;</p> <table align="center"> <caption>A table recording the SXRD run number and sample orientation analysed.</caption> <thead> <tr> <th scope="col"><em>Run Number</em></th> <th scope="col"><em>Sample Orientation Reference</em></th> <th scope="col"> <p><em>Sample Orientation&nbsp;(Horizontal - Vertical)</em></p> </th> </tr> </thead> <tbody> <tr> <td>103840</td> <td>Sample 6</td> <td>TD45&ordm;RD - ND</td> </tr> <tr> <td>103841</td> <td>Sample 5</td> <td>RD - TD45&ordm;ND</td> </tr> <tr> <td>103842</td> <td>Sample 4</td> <td>TD - RD45&ordm;ND</td> </tr> <tr> <td>103843</td> <td>Sample 3</td> <td>RD - TD</td> </tr> <tr> <td>103844</td> <td>Sample 2</td> <td>RD - ND</td> </tr> <tr> <td>103845</td> <td>Sample 1</td> <td>TD - ND</td> </tr> </tbody> </table> <p><strong>Diffraction Pattern Averaging </strong></p> <p>The .cbf images found in the <a href="https://doi.org/10.5281/zenodo.7311306">raw dataset</a>&nbsp;were first converted into .tiff images. The stage-scan images were then averaged together for each of the different sample orientations, using a Python notebook <a href="https://github.com/LightForm-group/sxrd-tiff-summer">sxrd-tiff-summer</a>, to produce six averaged .tiff images. These averaged .tiff image capture average diffraction peak intensities from an area of about 96.75 mm<sup>2</sup>&nbsp;(equivalent to a total volume of around&nbsp;193.5 mm<sup>3</sup>) from each piece, which is therefore representative of bulk crystallographic texture from six different sample orientations.</p> <p><strong>MAUD Analysis </strong></p> <p>To process data using MAUD the diffraction pattern images must first be caked, which converts the data into .dat files of intensity versus 2&theta; profiles, using 72 azimuthal cakes, each of 5&deg; azimuthal width. Although MAUD has an in-built function to cake data, using ImageJ, it is not possible to cake data in MAUD with ImageJ in an automated way. Therefore, caking was done using <a href="https://pyfai.readthedocs.io/en/master/">pyFAI</a>, an open-source Python package, with the caking procedure recorded in a separate Python notebook, <a href="https://github.com/LightForm-group/pyFAI-integration-caking">pyFAI-integration-caking</a>. The caking was applied to each of the six averaged tiff images, as well as being applied to 387 individual X-Y stage-scan tiff images from Sample 1 (103845). The caking procedure was also applied to the CeO2 calibrant diffraction pattern, creating a .dat file that could be used for calibration of the instrument parameters within MAUD, before fitting the experimental data from the different samples.</p> <p>A separate package <a href="https://github.com/LightForm-group/MAUD-batch-analysis">MAUD-batch-analysis</a>&nbsp;was used to record the setup of the files and details of the refinement procedure. Details about the refinement procedure are also recorded in an accompanying paper reporting on these results. A number of refinement steps were used to fit the caked data from the six different sample orientations, and calculate texture. Texture was also calculated from a .dat file that combined all six sample orientations together. The crystallographic texture was refined using the E-WIMV algorithm, which was found to best reproduce quantitative texture intensity values with an orientation distribution function (ODF) resolution of 15&ordm;.</p> <p>The MAUD-batch-analysis package also contains details about how to setup and run MAUD in an automated batch processing mode. MAUD&#39;s batch mode was used to calculate texture from a series of 387 individual stage-scan diffraction patterns from Sample 1 (103845). A MAUD-batch-analysis script was first used to substitute caked data from the 387 diffraction patterns into template .par files, which contained an initial refinement of the volume fraction, crystal sizes and micro-strain, as a starting point. Both the crystal parameters and texture were then iteratively refined, in MAUD, using a .ins batch analysis script launched from the terminal. This was done to refine both &alpha; and then &beta; phase texture.</p> <p>The texture data from the MAUD analysis was recorded as an ODF, with 15&ordm; resolution over all Euler space, and extracted in text format using a script from MAUD-batch-analysis. These text files can be loaded into <a href="https://mtex-toolbox.github.io">MTEX</a>, for plotting and analysing both the &alpha; and &beta; phase crystallographic texture.</p> <p><strong>Continuous-Peak-Fit Analysis </strong></p> <p>A .poni calibration file was created using <a href="https://www.clemensprescher.com/programs/dioptas">Dioptas</a>, through a refinement matching peak intensities from a CeO2 standard diffraction pattern image. Dioptas was then used to determine peak bounds in 2&theta; for characterising a total of 21 &alpha; and 4 &beta; lattice plane rings from the Ti-64 diffraction pattern images, which were recorded in a .py input script. Using these two inputs, Continuous-Peak-Fit automatically converts full diffraction pattern rings into profiles of intensity versus azimuthal angle, for each 2&theta; section, which can also include multiple overlapping &alpha; and &beta; peaks.</p> <p>The Continuous-Peak-Fit refinement can then be launched in a notebook or from the terminal, to automatically calculate a full mathematical description, in the form of Fourier expansion terms, to match the intensity variation of each individual lattice plane ring. The results for peak position, intensity and half-width for all 21 &alpha; and 4 &beta; lattice plane peaks were recorded at an azimuthal resolution of 1&ordm; and stored in a .fit output file. Details for setting up and running this analysis can be found in the <a href="https://github.com/LightForm-group/continuous-peak-fit-analysis">continuous-peak-fit-analysis</a>&nbsp;package. This package also includes a Python script for extracting lattice plane ring intensity distributions from the .fit files, matching the intensity values with spherical polar coordinates to parametrise the intensity distributions from each of the six different sample orientations, in the form of pole figures. The script can also be used to combine intensity distributions from different sample orientations. The final intensity variations are recorded for each of the lattice plane peaks as text files, which can be loaded into MTEX to plot and analyse both the &alpha; and &beta; phase crystallographic texture. This method was also used to analyse all 387 individual diffraction patterns recorded across Sample 1 (S1 &ndash; 103845), to quantify the texture variation across the piece.</p> <p><strong>Metadata </strong></p> <p>An accompanying YAML text file contains associated processing metadata for both the MAUD and the Continuous-Peak-Fit analyses, recording information about the different packages used to process the data, along with details about the different files contained within this analysis dataset.</p>

opencc-by-4.0Nov 2022View details →
zenodo44/100

Synchrotron X-ray Diffraction Dataset - Measuring Bulk Crystallographic Texture from Differently-Orientated Ti-6Al-4V Samples

<p>A dataset of raw synchrotron X-ray diffraction (SXRD) images, recording crystallographic texture from two different pre-processed Ti-6Al-4V (Ti-64) materials, analysing six differently orientated samples from each material. The aim of the work was to provide a large dataset for testing and improving crystallographic texture refinement&nbsp;from SXRD patterns, with the&nbsp;use of&nbsp;different computational fitting methods.</p> <p>Prior to the experiment, the Ti-64 materials had been pre-rolled and then air-cooled to develop the microstructure, rolling to 50% and 87.5% reduction at 915&ordm;C using a rolling mill at The University of Manchester. Rectangular samples (2 mm thick) were then machined from these rolled blocks. The samples were&nbsp;cut along different directions, three samples along different orthogonal rolling directions, and three at different&nbsp;angles to the rolling directions. The samples are referenced according to alignment of the rolling directions (RD &ndash; rolling direction, TD &ndash; transverse direction, ND &ndash; normal direction) with the long horizontal (X) axis and short vertical (Y) axis of the rectangular specimens.&nbsp;</p> <p>Data was&nbsp;recorded&nbsp;using a high energy 99.8 keV synchrotron X-ray beam and a 5 second exposure at the detector.&nbsp;The slits were adjusted to give a 0.5 x 0.5 mm beam area, chosen to optimally resolve both the &alpha; (hexagonal close packed, hcp) and &beta; (body-centred cubic, bcc) phase peaks.&nbsp;The SXRD data was recorded across each of the specimens by stage-scanning the beam in sequential X-Y positions at 0.5 mm increments, forming a rectangular grid of measurement points across each sample.&nbsp;A powder Ti-64 sample was also measured as a random texture standard.</p> <p>As well as the main experiment, 3 samples (sample 1, 2 and 3) were held together in different orders (1, 2, 3 ; 2, 1, 3 ; 2, 3, 1) and analysed through-thickness, to measure how beam attenuation might affect the bulk texture measurement. In addition, different detector exposure times (1 to 0.04 seconds) were also tested to analyse the impact of exposure time on overall intensity, to see how well the &alpha;&nbsp;and &beta;&nbsp;peaks could be resolved from background noise at very fast acquisition frequencies.</p> <p>The raw data is in the form of synchrotron diffraction pattern images which has been separated according to experiment type. An accompanying YAML text file contains associated beamline metadata for each measurement. Further details of the experimental setup can be found in a pdf document.</p> <p>The material data folder contains further details about the material and sample orientations, including an electron backscatter diffraction (EBSD) map that can be used to verify&nbsp;the crystallographic texture.</p>

opencc-by-4.0Nov 2022View details →
zenodo44/100

Measuring Bulk Crystallographic Texture from Ti-6Al-4V Hot-Rolled Sample Matrices using Synchrotron X-ray Diffraction (Analysis Dataset)

<p>A dataset of synchrotron X-ray diffraction (SXRD) analysis files, recording the refinement of crystallographic texture from a number of Ti-6Al-4V (Ti-64) sample matrices, containing a total of 93 hot-rolled samples, from three different orthogonal sample directions. The aim of the work was to accurately quantify bulk macro-texture for both the &alpha; (hexagonal close packed, hcp) and &beta; (body-centred cubic, bcc) phases across a range of different processing conditions.</p> <p><strong>Material </strong></p> <p>Prior to the experiment, the Ti-64 materials had been hot-rolled at a range of different temperatures, and to different reductions, followed by air-cooling, using a rolling mill at The University of Manchester. Rectangular specimens (6 mm x 5 mm x 2 mm) were then machined from the centre of these rolled blocks, and from the starting material. The samples were cut along different orthogonal rolling directions and are referenced according to alignment of the rolling directions (RD &ndash; rolling direction, TD &ndash; transverse direction, ND &ndash; normal direction) with the long horizontal (X) axis and short vertical (Y) axis of the rectangular specimens. Samples of the same orientation were glued together to form matrices for the synchrotron analysis. The material, rolling conditions, sample orientations and experiment reference numbers used for the synchrotron diffraction analysis are included in the data as an excel spreadsheet.</p> <p><strong>SXRD Data Collection </strong></p> <p>Data was recorded using a high energy 90 keV synchrotron X-ray beam and a 5 second exposure at the detector for each measurement point. The slits were adjusted to give a 0.5 x 0.5 mm beam area, chosen to optimally resolve both the &alpha; and &beta; phase peaks. The SXRD data was recorded by stage-scanning the beam in sequential X-Y positions at 0.5 mm increments across the rectangular sample matrices, containing a number of samples glued together, to analyse a total of 93 samples from the different processing conditions and orientations. Post-processing of the data was then used to sort the data into a rectangular grid of measurement points from each individual sample.</p> <p><strong>Diffraction Pattern Averaging </strong></p> <p>The stage-scan diffraction pattern images from each matrix were sorted into individual samples, and the images averaged together for each specimen, using a Python notebook <a href="https://github.com/LightForm-group/sxrd-tiff-summer">sxrd-tiff-summer</a>. The averaged .tiff images each capture average diffraction peak intensities from an area of about 30 mm<sup>2</sup>&nbsp;(equivalent to a total volume of ~ 60 mm<sup>3</sup>), with three different sample orientations then used to calculate the bulk crystallographic texture from each rolling condition.</p> <p><strong>SXRD Data Analysis </strong></p> <p>A new Fourier-based peak fitting method from the <a href="https://pypi.org/project/continuous-peak-fit/">Continuous-Peak-Fit</a>&nbsp;Python package was used to fit full diffraction pattern ring intensities, using a range of different lattice plane peaks for determining crystallographic texture in both the &alpha; and &beta; phases. Bulk texture was calculated by combining the ring intensities from three different sample orientations.</p> <p>A .poni calibration file was created using <a href="http://www.clemensprescher.com/programs/dioptas">Dioptas</a>, through a refinement matching peak intensities from a LaB6 or CeO2 standard diffraction pattern image. Two calibrations were needed as some of the data was collected in July 2022 and some of the data was collected in August 2022. Dioptas was then used to determine peak bounds in 2&theta; for characterising a total of 22 &alpha; and 4 &beta; lattice plane rings from the averaged Ti-64 diffraction pattern images, which were recorded in a .py input script. Using these two inputs, Continuous-Peak-Fit automatically converts full diffraction pattern rings into profiles of intensity versus azimuthal angle, for each 2&theta; section, which can also include multiple overlapping &alpha; and &beta; peaks.</p> <p>The Continuous-Peak-Fit refinement can be launched in a notebook or from the terminal, to automatically calculate a full mathematical description, in the form of Fourier expansion terms, to match the intensity variation of each individual lattice plane ring. The results for peak position, intensity and half-width for all 22 &alpha; and 4 &beta; lattice plane peaks were recorded at an azimuthal resolution of 1&ordm; and stored in a .fit output file. Details for setting up and running this analysis can be found in the <a href="https://github.com/LightForm-group/continuous-peak-fit-analysis">continuous-peak-fit-analysis</a>&nbsp;package. This package also includes a Python script for extracting lattice plane ring intensity distributions from the .fit files, matching the intensity values with spherical polar coordinates to parametrise the intensity distributions from each of the three different sample orientations, in the form of pole figures. The script can also be used to combine intensity distributions from different sample orientations. The final intensity variations are recorded for each of the lattice plane peaks as text files, which can be loaded into MTEX to plot and analyse both the &alpha; and &beta; phase crystallographic texture.</p> <p><strong>Metadata </strong></p> <p>An accompanying YAML text file contains associated SXRD beamline metadata for each measurement. The raw data is in the form of synchrotron diffraction pattern .tiff images which were too large to upload to Zenodo and are instead stored on The University of Manchester&#39;s Research Database Storage (RDS) repository. The raw data can therefore be obtained by emailing the authors.</p> <p>The material data folder documents the machining of the samples and the sample orientations.</p> <p>The associated processing metadata for the Continuous-Peak-Fit analyses records information about the different packages used to process the data, along with details about the different files contained within this analysis dataset.</p>

opencc-by-4.0Dec 2022View details →
zenodo44/100

Measuring Bulk Crystallographic Texture from Ti-6Al-4V Hot-Rolled Sample Matrices using Synchrotron X-ray Diffraction (Results Dataset)

<p>A dataset of crystallographic texture results for both &alpha; (hexagonal close packed, hcp) and &beta; (body-centred cubic, bcc) phases, measured from 31 different hot-rolled Ti-6Al-4V (Ti-64) materials and 3 differently orientated samples using synchrotron X-ray diffraction (SXRD). The aim of the work was to accurately quantify bulk macro-texture for both the &alpha; and &beta; phases across a range of different processing conditions, and to compare results with electron backscatter diffraction (EBSD) measurements.&nbsp;The synchrotron intensities were extracted using a new Fourier-based peak fitting method from the <a href="https://pypi.org/project/continuous-peak-fit/">Continuous-Peak-Fit</a>&nbsp;Python package, and then directly used to calculate the pole figures, orientation distribution functions (ODFs) and numerical values for the texture indices in <a href="https://mtex-toolbox.github.io">MTEX</a></p> <p><strong>Material </strong></p> <p>The Ti-64 materials had been hot-rolled at a range of different temperatures, and to different reductions, followed by air-cooling. Three samples of different orientation were cut from the centre of these rolled blocks, and from the starting material. The material and hot-rolling conditions are recorded in this <a href="https://doi.org/10.5281/zenodo.7438090">analysis dataset</a>&nbsp;as an excel spreadsheet and summarised in the table below.</p> <table align="center"> <caption>A table recording the sample number and associated hot-rolling condition.</caption> <tbody> <tr> <td> <p><em><strong>Sample Number</strong></em></p> </td> <td> <p><em><strong>Rolling Condition</strong></em></p> </td> </tr> <tr> <td>1</td> <td>825&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>2</td> <td>865&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>3</td> <td>895&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>4</td> <td>915&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>5</td> <td>935&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>6</td> <td>950&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>7</td> <td>960&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>8</td> <td>975&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>9</td> <td>1020&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>10</td> <td>&beta;-annealed,&nbsp;825&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>11</td> <td>&beta;-annealed,&nbsp;915&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>12</td> <td>&beta;-annealed,&nbsp;975&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>13</td> <td>Reduced heating from&nbsp;915&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>14</td> <td>Reduced heating from&nbsp;975&ordm;C, 87.5% Reduction</td> </tr> <tr> <td>15</td> <td>825&ordm;C, 75% Reduction</td> </tr> <tr> <td>16</td> <td>865&ordm;C, 75% Reduction</td> </tr> <tr> <td>17</td> <td>895&ordm;C, 75% Reduction</td> </tr> <tr> <td>18</td> <td>915&ordm;C, 75% Reduction</td> </tr> <tr> <td>19</td> <td>935&ordm;C, 75% Reduction</td> </tr> <tr> <td>20</td> <td>950&ordm;C, 75% Reduction</td> </tr> <tr> <td>21</td> <td>960&ordm;C, 75% Reduction</td> </tr> <tr> <td>22</td> <td>975&ordm;C, 75% Reduction</td> </tr> <tr> <td>23</td> <td>1020&ordm;C, 75% Reduction</td> </tr> <tr> <td>24</td> <td>&beta;-annealed,&nbsp;825&ordm;C, 75% Reduction</td> </tr> <tr> <td>25</td> <td>&beta;-annealed,&nbsp;915&ordm;C, 75% Reduction</td> </tr> <tr> <td>26</td> <td>&beta;-annealed,&nbsp;975&ordm;C, 75% Reduction</td> </tr> <tr> <td>27</td> <td>Reduced heating from&nbsp;915&ordm;C, 75% Reduction</td> </tr> <tr> <td>28</td> <td>Reduced heating from 975&ordm;C, 75% Reduction</td> </tr> <tr> <td>29</td> <td>As-received</td> </tr> <tr> <td>30</td> <td>As-received, &beta;-annealed</td> </tr> <tr> <td>31</td> <td>975&ordm;C, 50% Reduction</td> </tr> </tbody> </table> <p><strong>MTEX Data Analysis</strong></p> <p>The lattice plane intensities for 22 &alpha; and 4 &beta; phase peaks were extracted from the Continuous-Peak-Fit analysis, also included in this <a href="https://doi.org/10.5281/zenodo.7438090">analysis dataset</a>, and saved as text files in the form of pole figures. The lattice intensity text files were analysed in MTEX using scripts from the <a href="https://github.com/LightForm-group/continuous-peak-fit-analysis">continuous-peak-fit-analysis</a>&nbsp;package, to plot pole figures and ODF slices, and to calculate pole figure maxima, ODF maxima, texture indices and texture component phase fractions. A kernel half-width of 10&deg; was found to produce optimal data fitting, for highly accurate texture strength intensity values.</p> <p><strong>Metadata </strong></p> <p>An accompanying YAML text file contains associated processing metadata for the SXRD analysis, recording information about the packages used to process the data, along with details about the different files contained within this results dataset.</p>

opencc-by-4.0Dec 2022View details →
zenodo44/100

Penta-coordinated or -valent: the nature of the chemical bond of some Ti-C-Al compounds

<p>These folders contain the raw date which were used to prepare the above publication.<br> The zipfiles entitles compound-1.zip, compound-2.zip, and compound-3.zip contain the data for the computed compounds of the main publication. Please refer to that for further details. The zip-file xray.zip contains the original cif-file for convenience.<br> &nbsp;</p>

opencc-by-4.0Feb 2023View details →
zenodo44/100

FESEM after antibacterial test on Ti- bulk metallic glass compared with Ti6Al4V

<p>Field Emission scanning electron microscopy of Ti40Zr10Cu36Pd14 and Ti6Al4V after 24 h of antibacterial test with Aggregatibacter</p>

opencc-by-4.0Sep 2023View details →
zenodo40/100

Atom probe tomography data collection from DIN 1.4970 (15-15Ti) austenitic stainless steel irradiated with Fe ions

<p>This dataset comprises a large collection of atom probe tomography datasets collected from DIN 1.4970 alloy that was irradiated with Fe ions at different conditions. The DIN 1.4970 alloy is an austenitic stainless steel with 15 wt% Cr, 15 wt% Ni, a small addition of Ti. The full composition and characterization of our material can be found published elsewhere [1,2].</p> <p>Some of our material was subjected to ageing heat treatments at different temperatures for different times. Small samples of our original material and aged material was irradiated at the Michigan Ion Beam Laboratory in 2017 with 4.5 MeV Fe ions up to 40 dpa at an average dose rate of <span class="math-tex">\(2 \times 10^{-4}\)</span> dpa/s. This was done at three different temperatures: 300, 450, and 600 &ordm;C. Atom probe samples were made of the irradiated layers (approximately 1.5 micron deep) with focused ion beam and mounted on Microtip coupons. APT measurements took place on three CAMECA LEAP-HR systems located at CAES in Idaho Falls, USA (files beginning with R33), at Montanuniversit&auml;t Leoben in Leoben, Austria (R21) and at Friedrich&ndash;Alexander University in Erlangen, Germany (R56).</p> <p>The contents of this archive are:</p> <ul> <li>A folder containing the raw RHIT files</li> <li>A folder containing all the reconstructions and miscelaneous analysis files made by the author</li> <li>An excel file which indicates which measurement number stands for what material</li> <li>A suggested range file</li> </ul> <p>The RHIT files can only be used if one has access to the full IVAS 3.x version in order to make new reconstructions.</p> <p>The reconstructions and analysis folder can be useful to anyone. The folder buildup structure is similar to a project folder created by IVAS and should be directly importable into IVAS. Most folders are simply named after the RHIT file they were constructed from, though some have slightly modified names to include date of creation, extra information,... Inside all these folders you will find the recons folder and inside multiple reconstructions. At the deepest level you will find .pos files which can be read into free software such as python or <a href="http://threedepict.sourceforge.net/">3depict</a>. The range file that will give decent results on all these measurements is given at the top level; slight modifications may need to be applied for each measurement. Inside all folders you will also find numerous files (csv, png, jpg, ...) that were created by analyzing the data in IVAS. Sometimes the file names are very descriptive, sometimes less so. Sometimes these files were not saved to the default analysis folder but elsewhere on my drive. To be complete, I have moved all of these files into the top level folder. Therefore, besides the imagoAnalysis and recons folders, you will sometimes find additional folders and files in the folder. By different merging procedures, there may be multiple copies of the same files present as well. Unfortunately, the reconstructions and analysis folder is rather chaotic, as is the nature of file creation by IVAS.</p> <p>It is most instructive to start with the excel file at the top level of the archive. The first sheet contains some information, mostly the same as mentioned here. The second sheet pertains to the ion irradiations that were performed. The table colunms are self explanatory. Each irradiated sample was given a particular alias (first column), which relates it to the slot in the storage box in which it is stored. 5 different materials appear in the irradiations:</p> <ul> <li>T24 = tube, 24% cold worked. This represents the material as it was received from the manufacturer.</li> <li>T24-800C2h = the as-received material with an ageing heat treatment of 2 hours for 800 &ordm;C applied.</li> <li>T24-600C4h = the as-received material with an ageing heat treatment of 4 hours for 600 &ordm;C applied.</li> <li>T24-600C2868h = the as-received material with an ageing heat treatment of 2868 hours for 600 &ordm;C applied.</li> <li>T46 = tube 46% cold worked. This represents another material received from the manufacturer</li> <li>AIM1 = another related material with a higher P and Si content obtained from another research institute</li> </ul> <p>All these materials were irradiated under different conditions as given in the subsequent columns. The irradiation parameters were drawn directly from reports produced by the lab, but we suspect some typos slipped into the reports. We do know for certain that the samples were irradiated up to a surface dose of 40 dpa, at least according to a <a href="http://www.srim.org/">SRIM calculation</a> with the K-P model. Atom probe results only pertain to T24 and T24-800C2h. A few measurements were conducted on T24-600C4h material but this material was not irradiated.</p> <p>The last sheet gives an overview of all the APT measurements included in this archive. The first column pertains to the sample alias in sheet 2: the irradiated disc from which the samples were made. The sample detail column details the history of the sample for convenience: T24 - &lt;heat treatment conditions&gt; - &lt;irradiation conditions&gt;. When in doubt, one can look up the sample alias in sheet 2. The filename pertains to the APT measurement RHIT file. For the 3 measurements performed in Leoben, RHIT files are not included in this archive. Finally a few details such as approximate ion count and some comments are included for some measurements.</p> <p>Funding: This work was supported by ENGIE [contract number 2015-AC-007 e BSUEZ6900]; the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DE-AC07- 051D14517 as part of a Nuclear Science User Facilities experiment; and by the MYRRHA program in development at SCK-CEN, Belgium. Funding of the Austrian BMVIT (846933) in the framework of the program &quot;Production of the future&quot; and the &quot;BMVIT Professorship for Industry&quot; is gratefully acknowledged.</p> <p>&nbsp;</p> <p><a href="https://www.sciencedirect.com/science/article/pii/S0022311518300485">[1] N. Cautaerts, R. Delville, E. Stergar, D. Schryvers, M. Verwerft, Tailoring the Ti-C Nanoprecipitate Population and Microstructure of Titanium Stabilized Austenitic Steels, J. Nucl. Mater. 507 (2018) 177&ndash;187. doi:10.1016/j.jnucmat.2018.04.041.</a></p> <p>&nbsp;</p> <p><a href="https://www.sciencedirect.com/science/article/pii/S1359645418308103">[2] N. Cautaerts, R. Delville, E. Stergar, D. Schryvers, M. Verwerft, Characterization of (Ti,Mo,Cr)C Nanoprecipitates in an Austenitic Stainless Steel on the Atomic Scale, Acta Mater. 164 (2018) 90&ndash;98. doi:10.1016/J.ACTAMAT.2018.10.018.</a></p> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p> <p>&nbsp;</p>

opencc-by-4.0Dec 2019View details →
zenodo40/100

SI data: A high-throughput structural and electrochemical study of metallic glass formation in Ni-Ti-Al

<p>Journal:&nbsp;ACS&nbsp;Combinatorial Science<br> Title: A high-throughput structural and electrochemical study of&nbsp; metallic glass formation in Ni-Ti-Al<br> Author(s): Joress, Howie; DeCost, Brian; sarker, suchismita; Braun, Trevor; Jilani, Sidra; Smith, Ryan; Ward, Logan; Laws, Kevin; Mehta, Apurva; Hattrick-Simpers, Jason</p>

opencc-by-4.0May 2020View details →
zenodo40/100

Dataset for the `Performance of the EUDET-type beam telescopes' publication (EPJ TI)

<p>This repository holds the data on which the publication `Performance of the EUDET-type beam telescopes' is based on.</p> <p>The substructure is as follows:</p> <p>Files in the range of run000060.raw until run000112.raw belong to a geometry with plane distance dz = 150 mm.<br> Files in the range of run000114.raw until run000171.raw belong to a geometry with plane distance dz = 20 mm.<br> A run corresponds to a doublet of beam energy and sensor threshold settings. The numbers are detailed in the README file.</p>

opencc-by-4.0Aug 2016View details →
zenodo40/100

BAM reference data: Temperature-dependent Young's and shear modulus data for additively and conventionally manufactured variants of Ti-6Al-4V

<p>This BAM reference dataset reports the elastic properties (Young's modulus, shear modulus) of titanium alloy Ti-6Al-4V between room temperature and 400 &deg;C in an additively manufactured variant (laser-based directed energy deposition with powder as feedstock, DED-LB/M) and from a conventional process route (hot rolled bar). It was generated in an accredited test laboratory using calibrated measuring equipment. The calibrations meet the requirements of the test procedure and are metrologically traceable. The dataset was audited as BAM reference data.</p>

opencc-by-4.0Apr 2023View details →
zenodo40/100

RTX 3060 and RTX3060 ti price tracking dataset

<p><strong>El dataset contiene los siguientes campos:</strong></p> <ol> <li> <p><strong>Identificador &ldquo;id&rdquo;: dato cualitativo nominal que identifica a un &uacute;nico producto en la web de amazon. Podr&iacute;a utilizarse en una fase de procesado de datos para agrupar los productos y calcular tendencias de precio.</strong></p> </li> <li> <p><strong>Nombre &ldquo;name&rdquo;: dato cualitativo nominal que indica el nombre del producto. En los nombres de las tarjetas gr&aacute;ficas se suelen especificar datos de esta como el montador, el tipo y la cantidad de memoria y las interfaces. En una fase de procesado de los datos se podr&iacute;a extraer esta informaci&oacute;n buscando patrones en los nombres. En el ejemplo del apartado de representaci&oacute;n gr&aacute;fica podemos ver que la tarjeta es montada por Zotac Gaming, tiene 12Gb de memoria GDDR6 y tiene una interfaz HDMI 2.1 y 3 interfaces DisplayPort 1.4a.</strong></p> </li> <li> <p><strong>Enlace &ldquo;link&rdquo;: dato cualitativo nominal. Direcci&oacute;n web de donde se han extra&iacute;do los datos.</strong></p> </li> <li> <p><strong>Modelo &ldquo;model&rdquo;: dato categorico. Indica el modelo de la tarjeta gr&aacute;fica. Con las b&uacute;squedas que estamos haciendo este campo vale &ldquo;rtx 3060&rdquo; o &ldquo;rtx 3060 ti&rdquo;</strong></p> </li> <li> <p><strong>Valoraci&oacute;n &ldquo;valoration&rdquo;: dato cuantitativo. Valoraci&oacute;n del producto.</strong></p> </li> <li> <p><strong>Valoraciones &ldquo;valorations&rdquo;: dato cuantitativo. Cantidad de valoraciones que se han hecho del producto. Sirve sobre todo para tomar en consideraci&oacute;n la valoraci&oacute;n media del producto.</strong></p> </li> <li> <p><strong>Precio &ldquo;price&rdquo;: dato cuantitativo. Precio de la oferta.</strong></p> </li> <li> <p><strong>Coste de env&iacute;o &ldquo;shippingCosts&rdquo;: dato cuantitativo. Coste de env&iacute;o de la oferta.</strong></p> </li> <li> <p><strong>Vendedor &ldquo;seller&rdquo;: dato cualitativo nominal. Vendedor de la oferta</strong></p> </li> <li> <p><strong>Fecha de obtenci&oacute;n del registro &ldquo;date&rdquo;. Tiempo en que los datos son capturados.</strong></p> </li> </ol>

opencc-by-4.0Oct 2021View details →
zenodo40/100

Dataset for paper entitled, 'Confirmation of rapid-heating β recrystallization in wire-arc additively manufactured Ti-6Al-4V'.

<p>Dataset for paper entitled, &#39;Confirmation of rapid-heating &beta; recrystallization in wire-arc additively manufactured Ti-6Al-4V&#39;. doi:&nbsp;https://doi.org/10.1016/j.mtla.2020.100857</p>

opencc-by-4.0Jan 2022View details →

ScienceDex guides

Understand access before you commit

These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.

Compare curated datasets

Allen Brain Atlas

Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.

allen-brain-atlas
neuroscienceopenDocumentation, web resources, and API references are available online.
Last verified 2026-04-30Open record

Annotated Behaviour and Observability Dataset (ABODe)

ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.

abode-home-cage
behavioral-neuroscienceopenThe DataShare record exposes download links for annotations, documentation, license text, and the zipped per-snippet data directory.
Last verified 2026-04-30Open record

DANDI Archive for NWB datasets

DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.

dandi-nwb
electrophysiologyopenPublished Dandiset metadata and archive endpoints are available through the production DANDI API.
Last verified 2026-04-30Open record

International Brain Laboratory public data

The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.

ibl
behavioral-neuroscienceopenPublic sessions can be searched and loaded from the IBL public data server through ONE.
Last verified 2026-04-29Open record

OpenNeuro

OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.

openneuro
neuroscienceopenPublished datasets are available on demand over the internet.
Last verified 2026-04-29Open record

ScienceDex for faculty

Your academic CV and NIH biosketch

Make your CV in your school's format and your NIH biosketch from it, then download both as Word files.