Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
31
datasets available to search
ShareScore release 0.9.0
Dataset results
31 results for “Tidal model”
Best-fitting Sea Level Curves generated from the Tidal Notch Generator model
<p>The following dataset contains the data produced by the TidalNotch Generator model found at: https://zenodo.org/badge/latestdoi/700386384 and is part of the publication entitled: <strong>Decoding the interplay between tidal notch geometry and sea-level variability during the Last Interglacial (Marine Isotopic Stage 5e) high stand.</strong></p> <p>Each folder name describes the Erosion Rate used for each simulation, the Linear Regression of each curve group, and the number of peaks: e.g. Filename: 05mm_Negative_3peak. </p> <p>Each of the subfolders contains the final clusters grouped based on the methodology followed, extensively described in the manuscript.</p> <p>Each txt file contains 15 columns, while the content of each one is described below:</p> <p>Column 1: Random Sea Level Curve (Years)</p> <p>Column 2: Random Sea Level Curve (Elevation)</p> <p>Column 3: Modeled Notch Geometry (Notch Depth)</p> <p>Column 4: Modeled Notch Geometry (Notch Elevation)</p> <p>Column 5: Measured Notch Geometry (Notch Depth)</p> <p>Column 6: Measured Notch Geometry (Notch Elevation)</p> <p>Column 7: Fitting score (e.g. 0.17 --> 1-0.17=0.83-->83%)</p> <p>Column 8: Polynomial Order used to Interpolate the Randomly generated Sea Level points</p> <p>Column 9: Erosion Rate used for the simulation</p> <p>Column 10: ID of measured notch profile</p> <p>Column 11: number of simulation </p> <p>Column 12: Inclination of the measured notch</p> <p>Column 13: Category of Inclination</p> <p>Column 14: second ID of measured notch profile</p> <p>Column 15: Linear Regression value</p>
Tidal model for the Spermonde Archipelago (2017-2019)
<p>A simple, low-resolution DELFT 3D model (2 year water level simulation) for the Spermonde Archipelago, Indonesia. Full description and validation available at the github link: https://github.com/Alerovere/Tidal_model_Spermonde.git</p> <p>This work was supported through grant SEASCHANGE (RO-5245/1-1) from the Deutsche Forschungsgemeinschaft (DFG) as part of the Special Priority Program (SPP)-1889 “Regional Sea Level Change and Society”</p>
Climatological Tidal Model of the Thermosphere - CTMT
<p>For detailed description, see <a href="http://dx.doi.org/10.1029/2011JA016784">Oberheide et al., 2011</a> and the <a href="http://globaldynamics.sites.clemson.edu/articles/ctmt.html">CTMT webpage</a>.</p> <p>Briefly, CTMT is based on tidal temperature and wind observations made in the MLT region by SABER and TIDI on TIMED that are extended into the thermosphere using Hough Mode Extension (HME) modeling. The latter can be thought of as constraining a tidal model with observations and produces self-consistent tidal fields in temperature, neutral density, and zonal, meridional and vertical winds from pol-to-pole and from 80-400 km. A monthly tidal climatology is compiled from averaged 2002-2008 TIMED observations. CTMT accounts for contributions from solar radiation absorption in the troposphere and stratosphere, tropospheric latent heat release, and non-linear wave-wave interactions occurring in the MLT or below. It is valid for a solar radio flux of F10.7 = 110 sfu and includes the 6 (8) most important migrating and nonmigrating diurnal (semidiurnal) tidal components. As such it is suitable for driving upper atmosphere models that require self-consistent tidal fields in the MLT region as a lower boundary condition or to study the effects of tidal density variations in the re-entry region, to name just a few examples. Thermospheric tidal forcing occurring above the MLT is not accounted for. CTMT, therefore, does not capture (i) migrating tides forced in-situ by the absorption of solar EUV radiation, and (ii) nonmigrating tides forced in the thermosphere.</p>
Self-consistent models of Earth's mantle and core from long-period seismic and tidal constraints
<p>This dataset consists of a collection of self-consistent radial seismic Earth models. The models are derived by inverting a large set of normal-mode centre-frequencies, quality factors, and geodetic data, including mass, moment of inertia, and tidal response.</p><p>The dataset is accompanied by a research paper titled "Self-consistent models of Earth's mantle and core from long-period seismic and tidal constraints" (DOI: <a href="https://doi.org/10.1093/gji/ggad254">10.1093/gji/ggad254</a>). The paper presents the methodology and findings related to the development of the models.</p><p>This version (V0.2) of the dataset replaces the previous version (V0.1). </p><p><strong>Dataset Details</strong></p><p>The dataset includes confidence intervals (CIs) for these parameters at 25%, 50%, and 75% levels that are representative of the uncertainty of the sampled model parameters. For example, the files <a href="https://zenodo.org/api/files/fa9f19f0-bf6a-41a8-8ca7-489a5b1b9c49/screm-25p-high.dat?versionId=b3b349c2-0a0b-48cc-b1f3-90137b8d1dcb">screm-25p-high.dat</a> and <a href="https://zenodo.org/api/files/fa9f19f0-bf6a-41a8-8ca7-489a5b1b9c49/screm-25p-low.dat?versionId=81db34f2-29f4-48aa-95c4-bb73b050a47f">screm-25p-low.dat</a> contain the upper and lower bound of the 25% CI sampled model range. A python plotting script is available, which plots the CIs.</p><p>The dataset files are provided in comma-separated values (CSV) format, containing the following columns:</p><ol><li><strong>Radius (km)</strong>: Radial distance from the center of the Earth.</li><li><strong>Depths (km)</strong>: Depth from the surface of the Earth.</li><li><strong>Density (g/cm³)</strong>: Radial density structure.</li><li><strong>P-wave velocity (vp) (km/s)</strong>: Radial compressional (P) wave velocity structure</li><li><strong>S-wave velocity (vs) (km/s)</strong>: Radial shear (S) wave velocity structure.</li><li><strong>Qkappa</strong>: Radial bulk attenuation structure.</li><li><strong>Qmu</strong>: Radial shear wave attenuation structure.</li><li><strong>Bulk Modulus (K) (GPa)</strong>: Radial bulk modulus structure.</li><li><strong>Shear Modulus (Mu) (GPa)</strong>: Radial shear modulus structure.</li><li><strong>Pressure (GPa)</strong>: Radial pressure profile.</li><li><strong>Temperature (K)</strong>: Radial geothermal profile.</li></ol><p><strong>Citation</strong></p><p>If you use this dataset in your research or refer to the models, please cite the following paper:</p><p><strong>Title:</strong> Self-consistent models of Earth's mantle and core from long-period seismic and tidal constraints<br><strong>Authors:</strong> J. Kemper, A. Khan, G. Helffrich, M. van Driel, D. Giardini<br><strong>Journal:</strong> Geophysical Journal International<br><strong>Year: </strong>2023<br><strong>DOI:</strong> <a href="https://doi.org/10.1093/gji/ggad254">10.1093/gji/ggad254</a></p><p>Please also acknowledge the dataset by providing a link to the Zenodo repository and its DOI.</p><p>Bibtex:<br>@article{Kemper_etal23,<br>author = {Kemper, J and Khan, A and Helffrich, G and van Driel, M and Giardini, D},<br>title = "{Self-consistent models of Earth's mantle and core from long-period seismic and tidal constraints}",<br>journal = {Geophysical Journal International},<br>pages = {ggad254},<br>year = {2023},<br>month = {06},<br>issn = {0956-540X},<br>doi = {10.1093/gji/ggad254},<br>url = {https://doi.org/10.1093/gji/ggad254},<br>} </p><p> </p>
Data from: Evaluating temporal and spatial transferability of a tidal inundation model for foraging waterbirds
<p>For ecosystem models to be applicable outside their context of development, temporal and spatial transferability must be demonstrated. This presents a challenge for modeling intertidal ecosystems where spatiotemporal variation arises at multiple scales. Models specializing in tidal dynamics are generally inhibited from having wider ecological applications by coarse spatiotemporal resolution or high user competency. The Tidal Inundation Model of Shallow-water Availability (TiMSA) uniquely simulates tides to empirically derive a time-integrated measure of availability for a shallow water depth range defined by the user. To evaluate temporal and spatiotemporal transferability, we employed TiMSA at the development site in the Florida Keys and at novel sub-sites in the Florida Bay (application site) under a different time period (application period). We used foraging Little Blue Herons (<em>Egretta caerulea</em>) as the ecological unit with which to constrain the model's 'water depth window', i.e., range of water depths to estimate shallow-water availability. At the development site, temporally consistent water depth windows contrasted with interannual variation in shallow-water availability which revealed short-term changes in Little Blue Heron foraging habitat. At the application site, water depth accuracy varied by sub-site and was correlated with spatial error in bathymetric elevation. Although TiMSA parameters were sensitive to environmental temporal variation and uncertainty in spatial data, a spatially-explicit water depth window generated reliable estimates of shallow-water conditions over space and time at the development and application sites. By exploring the contributing factors to model error, we provide solutions to reduce uncertainty of TiMSA parameters at potential application sites and recommendations for addressing bathymetric inaccuracy in digital elevation models. Accurately quantifying spatiotemporal changes of shallow-water has implications for monitoring habitat conditions for tidally-influenced species and projecting future changes to coastal ecosystems in response to anthropogenic stressors and natural disturbances such as sea level rise.</p>
Biogeomorphic modeling to assess the resilience of tidal-marsh restoration to sea level rise and sediment supply - Supporting code and data
<p>Code and data to reproduce figures and analyses of the paper:</p> <p>Gourgue, O., van Belzen, J., Schwarz, C., Vandenbruwaene, W., Vanlede, J., Belliard, J.-P., Fagherazzi, S., Bouma, T.J., van de Koppel, J., and Temmerman, S.: Biogeomorphic modeling to assess resilience of tidal marsh restoration to sea level rise and sediment supply, Earth Surf. Dynam., submitted.</p> <p>Standard Python dependencies:</p> <ul> <li>GDAL</li> <li>Geopandas</li> <li>Matplotlib</li> <li>NumPy</li> <li>Rasterio</li> <li>SciPy</li> <li>Seaborn</li> <li>Shapely</li> <li>scikit-learn</li> </ul> <p>Third-party Python dependencies:</p> <ul> <li>Centerline (https://github.com/fitodic/centerline)</li> <li>pputils (https://github.com/pprodano/pputils)</li> <li>pysheds (https://github.com/mdbartos/pysheds)</li> </ul> <p>In-house Python dependencies:</p> <ul> <li>Demeter 1.0.5 (https://doi.org/10.5281/zenodo.5205258)</li> <li>OGTools 1.1 (https://doi.org/10.5281/zenodo.3994952)</li> <li>TidalGeoPro 0.1 (https://doi.org/10.5281/zenodo.5205285)</li> </ul>
Bayesian Samples and Data Behind Figures: Comprehensive Bayesian Modeling of Tidal Circularization in Open Cluster Binaries part I
<p>Auxiliary data associated with the article <a href="https://ui.adsabs.harvard.edu/abs/2022MNRAS.516.6145P/abstract">"Comprehensive Bayesian Modeling of Tidal Circularization in Open Cluster Binaries part I: M 35, NGC 6819, NGC 188" by Penev, K & Schussler, J</a></p> <p>The type of data corresponds to a particular filename format. Bayesian samples are in HDF5 format, directly as saved by the <a href="https://emcee.readthedocs.io/en/stable/index.html">emcee</a> sampler (see <a href="https://emcee.readthedocs.io/en/stable/user/backends/">https://emcee.readthedocs.io/en/stable/user/backends/</a>). All other files are in AAS-journal style machine readable tables format generated by <a href="https://github.com/cds-astro/cds.pyreadme">cdspyreadme</a> python library.</p> <p>Description of contents by filename format:</p> <pre><code><CLUSTER>_<BINARY ID>_.*.h5</code></pre> <p>Bayesian analysis samples constraining the tidal dissipation efficiency of the given binary. The values of the sampled system and tidal dissipation parameters are stored as blobs (<a href="https://emcee.readthedocs.io/en/stable/user/blobs/">https://emcee.readthedocs.io/en/stable/user/blobs/)</a></p> <pre><code><CLUSTER>_<BINARY ID>_lgQ_period.mrt</code></pre> <p>The 2.3%, 15.9%, 84.1%, and 97.7% quantiles of <span class="math-tex">\(\log_{10}Q_\star'\)</span> for the given binary as a function of tidal period</p> <pre><code><CLUSTER>_<BINARY ID>_burnin_period.mrt</code></pre> <p>The MCMC burn-in period before the 2.3%, 15.9%, 84.1%, and 97.7% quantiles of <span class="math-tex">\(\log_{10}Q_\star'\)</span> for the given binary are considered converged (see article text).</p> <pre><code><CLUSTER>_<BINARY ID>_cdfstd_period.mrt</code></pre> <p>The standard deviation of the <span class="math-tex">\(CDF(\log_{10}Q_\star')\)</span> for the given binary as a function of tidal period for each of the quantiles. The maximum likelihood value is the target percentile, i.e. one of: 2.3%, 15.9%, 84.1%, and 97.7%</p>
Dataset for "Tidal control of the flow through long, narrow straits: a modeling study for the Seto Inland Sea"
<p>This dataset contains simulated results used to draw figures in the following paper.</p> <p>Kurogi, M. & Hasumi, H. Tidal control of the flow through long, narrow straits: a modeling study for the Seto Inland Sea, Sci. Rep. 9, 11077 (2019).</p> <p>==== List of data</p> <p> dep_T.nc: Depth of tracer point<br> dep_V.nc: Depth of velocity point<br> ssh.nc: Sea Surface Height for TIDE (hourly snapshots of July 2012)<br> ubt_TIDE.nc: Eastward barotropic velocity for TIDE (monthly mean)<br> vbt_TIDE.nc: Northward barotropic velocity for TIDE (monthly mean)<br> ubt_NTIDE.nc: Eastward barotropic velocity for NTIDE (monthly mean)<br> vbt_NTIDE.nc: Northward barotropic velocity for NTIDE (monthly mean)<br> ubt_NTIDE_DV0.nc: Eastward barotropic velocity for NTIDE_DV0 (monthly mean)<br> vbt_NTIDE_DV0.nc: Northward barotropic velocity for NTIDE_DV0 (monthly mean)<br> ubt_NTIDE_D.nc: Eastward barotropic velocity for NTIDE_D (monthly mean)<br> vbt_NTIDE_D.nc: Northward barotropic velocity for NTIDE_D (monthly mean)<br> ubt_NTIDE_DV.nc: Eastward barotropic velocity for NTIDE_DV (monthly mean)<br> vbt_NTIDE_DV.nc: Northward barotropic velocity for NTIDE_DV (monthly mean)<br> ubt_NTIDE_DVA.nc: Eastward barotropic velocity for NTIDE_DVA (monthly mean)<br> vbt_NTIDE_DVA.nc: Northward barotropic velocity for NTIDE_DVA (monthly mean)<br> ubt_inout.nc: Eastward barotropic velocity for the inflow-outflow model (monthly mean)<br> vbt_inout.nc: Northward barotropic velocity for the inflow-outflow model (monthly mean)<br> amv_TIDE.nc: Vertical average of vertical viscosity for TIDE (monthly mean)<br> ahv_TIDE.nc: Vertical average of vertical diffusivity for TIDE (monthly mean)<br> amv_NTIDE.nc: Vertical average of vertical viscosity for NTIDE (monthly mean)<br> ahv_NTIDE.nc: Vertical average of vertical diffusivity for NTIDE (monthly mean)<br> ke.nc: Vertical average of kinetic energy per unit mass for TIDE (monthly mean)<br> ke_bt.nc: Vertical average of barotropic kinetic energy per unit mass for TIDE (monthly mean)</p> <p> </p>
Model setup and output for 'Tidal conversion and dissipation at steep topography in a channel poleward of the critical latitude'
<p><strong>Data supplement to Hughes and Klymak 2019</strong></p> <p>Model input and output in a reduced form associated with the following paper:</p> <p><strong>Tidal conversion and dissipation at steep topography in a channel poleward of the critical latitude<br></strong><em>Journal of Physical Oceanography.</em> <a href="http://dx.doi.org/10.1175/JPO-D-18-0132.1">doi:10.1175/JPO-D-18-0132.1</a></p> <p><strong>Inputs</strong></p> <p>As described in Table 1 of the associated paper, there are three main sets of simulations. The input files for these sets are contained in their respective directories (`vary_width`, `vary_forcing`, and `vary_freq`). The python script that creates all of the necessary files is `gendata.py`. A fourth directory is titled `baroclinic_terms` and includes that simulation in which <em>u'</em> and <em>p'</em> are output at high temporal resolution.</p> <p>A key point regarding the input files is that for the vary width and vary forcing cases, a single simulation involves multiple channels. This lets me compile a single executable `mitgcmuv` with a Nx × Ny grid of 600 × 1280, which I divide up into the necessary number of channels by putting vertical walls in appropriate places. For the vary width cases, the 'narrow' simulations are all channels from 0.2 to 32 km and the 'wide' simulations are all wider channels. Once the simulation has run, I use netcdf tools (`ncks`) to extract the individual channels using the scripts in the `extract_scripts` directory.</p> <p>Most of the files in the `code` directories will be familiar to anyone that uses the MITgcm. An exception is the `energy_diagnostics_fill.F` (and `diagnostics_main_init.F` and `do_statevars_diags.F`, which have minor additions). The original, from `https://github.com/jklymak/MITgcmcode`, was modified slightly to suit this project.</p> <p><strong>Outputs</strong></p> <p>The results directory contains five subdirectories to be described in turn.</p> <p>Notes that in all cases, energy terms in the netCDF files do not include a factor of ρ. This was added in at the plotting stage.</p> <p>All simulations used Checkpoint67b and were run on Graham: https://docs.computecanada.ca/wiki/Graham.</p> <p><strong>vary_width</strong></p> <p>The majority of the files are of the form `obstacle_FFF_YY.nc` where `FFF` is $1000 ω/f$ and `YY` is the channel width in kilometres. These files contain the tidally averaged, depth-integrated energy diagnostics for the seventh tidal cycle at all points (<em>x, y</em>) within the energy control volume.</p> <p>There are also three files entitled `tophat_995_YY.nc`, which contain fields of <em>U</em>, <em>V</em>, and <em>T</em> (which gives density with α = 0.0002) at two levels. These fields are used as examples for weakly and strongly responding channels.</p> <p><br><strong>vary_forcing</strong></p> <p>These files are of the form `forcing_UU.nc` where `UU` is the deep-water tidal current amplitude <em>U_</em>0 in cm/s. They contain the same energy terms as for the vary width simulations.</p> <p><strong>vary_freq</strong></p> <p>These files are of the form `freq_FFF_fields.nc` and contain fields of <em>U</em>, <em>V</em>, and <em>T</em> at two levels. Energy terms are not included because the vary frequency simulations were only run to get estimates of the along-ridge wavelength.</p> <p><strong>baroclinic_terms</strong></p> <p>The single file within this directory contains <em>u'</em> and <em>p'</em> at a single <em>x</em> position every five minutes for four tidal cycles.</p> <p><strong>gaussian_26</strong></p> <p>This directory, named for its obstacle and width, contains <em>U</em>, <em>V</em>, and <em>T</em> at every grid point for a snapshot in time and another file with the corresponding snapshots of all energy terms.</p>
Example input files for Wolf-Rayet star models in paper "Tidal Spin-up of Black Hole Progenitor Stars"
<p>The files here show example input files for the models in the paper "Tidal Spin-up of Black Hole Progenitor Stars" by Ma & Fuller (2023).</p> <p>File "inlist_MS" and "inlist_WR" show MESA inlists to set up a Wolf-Rayet star model of 10 solar-masses (model 3 in Ma & Fuller 2023, Table 1).<br> We used MESA version r12778 for our calculation.<br> Specifically, "inlist_MS" starts a stellar model at zero-age main-sequence (ZAMS), and evolves it to the end of core hydrogen depletion.<br> After resuming the model from a photo file, "inlist_WR" turns on artificial mass-loss ("relax_mass" and "new_mass") to remove its hydrogen envelope, and then evolves the model throughout the helium burning Wolf-Rayet phase, until the end of core helium depletion.<br> During this phase, pulsation data are also created by MESA ("write_pulse_data_with_profile = .true.").</p> <p><br> File "gyre.in" is an example GYRE input file to solve for oscillation modes in the established Wolf-Rayet star models.<br> We used GYRE version 6.0.1 for our calculation.</p>
Data from: Evaluating temporal and spatial transferability of a tidal inundation model for foraging waterbirds
Open the record for dataset details and reuse information.
Observations and Modeling of a Buoyant Plume Exiting into a Tidal Cross-flow and Exhibiting Along-front Instabilities
<p>This post-processed dataset contains the sUAS imagery and numerical modeling output used in the paper "Observations and Modeling of a Buoyant Plume Exiting into a Tidal Cross-flow and Exhibiting Along-front Instabilities". The provided code details the frontal processing routine used for both the observations and modeling results. </p>
Glacial ice sheet extent effects on tidal mixing and the global overturning circulation - Model Output
<p>This dataset contains the output from the tide model and climate model simulations from the publication Wilmes et al. (2018) "Glacial ice sheet extent effects on tidal mixing and the global overturning circulation" submitted to Paleoceanography. The user is referred to the paper for details on the methodology.</p> <p>Dissipation files:</p> <p>Files beginning with "diss" contain tidal dissipation files calculated from the OTIS tide model output at 1/8th deg using the direct method. Files with the M2 constituent only are in .mat format and extend from 86deg S to 89deg N whereas the files containing all constituents (M2, S2, K1 and O1) are in netcdf format and extend from 90deg S to 90deg N. These files regridded and are used as the climate model tidal forcing.</p> <p>Dissipation file list:</p> <p>diss_dir_ze_1_8_rtp_21kyrBP_i6g_-I1.5_-t_8299008.nc Dissipation for LGM ICE-6G ZE ITdrag 1/8th deg<br> diss_dir_ze_1_8_rtp_21kyrBP_i5g_-I1.5_-t_8299031.nc Dissipation for LGM ICE-5G ZE ITdrag 1/8th deg<br> diss_dir_ze_1_8_rtp_00kyrBP_-I1.5_pdsal_8299034.nc Dissipation for PD ZE ITdrag 1/8th deg</p> <p>diss_dir_js_1_8_rtop_21kyrBP_i6g_-t_-I6.0_7673000.nc Dissipation for LGM ICE-6G JS ITdrag 1/8th deg<br> diss_dir_js_1_8_rtop_21kyrBP_i5g_-t_-I6.0_7672999.nc Dissipation for LGM ICE-5G JS ITdrag 1/8th deg<br> diss_dir_js_1_8_rtop_00kyrBP_-I6.0_7672998.nc Dissipation for PD JS ITdrag 1/8th deg</p> <p>diss_dir_ze_m2_1_8_rtp_21kyrBP_i5g_blk5_NH_lmsk_-I1.5_8299652.mat M2 dissipation for LGM ICE-5G blk1 + NH ICE-6G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_i5g_blk5_-I1.5_8299534.mat M2 dissipation for LGM ICE-5G blk5 ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_i5g_blk4_-I1.5_8299533.mat M2 dissipation for LGM ICE-5G blk4 ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_i5g_blk3_-I1.5_8299531.mat M2 dissipation for LGM ICE-5G blk3 ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_i5g_blk2_-I1.5_8299530.mat M2 dissipation for LGM ICE-5G blk2 ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_i5g_blk1_-I1.5_8299529.mat M2 dissipation for LGM ICE-5G blk1 ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_140mSLD_i6g_lmsk_-I1.5_8299543.mat M2 dissipation for PD 140mSLD ICE-6G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_140mSLD_i5g_lmsk_-I1.5_8299542.mat M2 dissipation for PD 140mSLD ICE-5G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_130mSLD_i6g_lmsk_-I1.5_8299544.mat M2 dissipation for PD 130mSLD ICE-6G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_130mSLD_i5g_lmsk_-I1.5_8299541.mat M2 dissipation for PD 130mSLD ICE-5G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_120mSLD_i6g_lmsk_-I1.5_8299545.mat M2 dissipation for PD 120mSLD ICE-6G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_120mSLD_i5g_lmsk_-I1.5_8299540.mat M2 dissipation for PD 120mSLD ICE-5G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_110mSLD_i6g_lmsk_-I1.5_8299546.mat M2 dissipation for PD 110mSLD ICE-6G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_110mSLD_i5g_lmsk_-I1.5_8299539.mat M2 dissipation for PD 110mSLD ICE-5G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_100mSLD_i6g_lmsk_-I1.5_8299547.mat M2 dissipation for PD 100mSLD ICE-6G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_100mSLD_i5g_lmsk_-I1.5_8299538.mat M2 dissipation for PD 100mSLD ICE-5G land mask ZE ITdrag 1/8th deg<br> diss_dir_ze_m2_1_8_rtp_21kyrBP_120mSLD_-I1.5_8299537.mat M2 dissipation for PD 120mSLD JS ITdrag 1/8th deg</p> <p> </p> <p>Climate model output:</p> <p>UVic climate model output for all simulations in the paper has been compressed using tar and zip. Each folder contains the output yearly averages (tavg.xxx.nc) which have been used in the results section of the paper. The model input files are located in /data. The tidal input file is in /data/O_tideenrg_green.nc. Furthermore included are restart files (rest.xxx.nc), model code in /code, and the model exectuables.</p> <p>Climate mode output list:</p> <p>preind_tidal_ze_00kyr_rtop_-1.5_8299034_dir.tgz Output from PIC<br> lgm_tidal_ze_21kyr_i6g_rtop_-1.5_8299008_dir_tau_lgm.tgz Output from LGM_i6gT_lgmW<br> lgm_tidal_ze_21kyr_i6g_rtop_-1.5_8299008_dir.tgz Output from LGM_i6gT_pdW<br> lgm_tidal_ze_21kyr_i5g_rtop_-1.5_8299031_dir_tau_lgm.tgz Output from LGM_i5gT_lgmW<br> lgm_tidal_ze_21kyr_i5g_rtop_-1.5_8299031_dir.tgz Output from LGM_i5gT_pdW<br> lgm_tidal_ze_00kyr_rtop_-1.5_8299034_dir_tau_lgm.tgz Output from LGM_pdT_lgmW<br> lgm_tidal_ze_00kyr_rtop_-1.5_8299034_dir.tgz Output from LGM_pdT_pdW</p> <p>preind_tidal_js_1_2_rtp_00kyrBP_-I1.0_7881173.tgz Output from PIC_1_2_rtp82<br> preind_js_1_2_SandS8.2_00kyrBP_82SNcb_-I1.0_8317333_dir.tgz Output from PIC_1_2_SS82<br> lgm_tidal_js_1_2_SandS8.2_00kyrBP_120mSLD_82SNcb_-t_-I1.0_8317331_dir.tgz Output from LGM_1_2_SS82_sldT<br> lgm_tidal_js_1_2_SandS8.2_00kyrBP_82SNcb_-I1.0_8317333_dir.tgz Output from LGM_1_2_SS82_pdT<br> lgm_tidal_js_1_2_rtop_00kyrBP_120mSLD_82SN_-t_-I1.0_8315693.tgz Output from LGM_1_2_rtp82_sldT<br> lgm_tidal_js_1_2_rtop_00kyrBP_82SN_pdsal_-I1.0_8315702.tgz Output from LGM_1_2_rtp82_pdT<br> <br> </p> <p> </p> <p> </p>
Model output: Unraveling the mechanisms that cause cyclic channel-shoal dynamics of ebb-tidal deltas: a numerical modeling study
<p>Output from model runs for Lenstra et al., “Unraveling the mechanisms that cause cyclic channel-shoal dynamics of ebb-tidal deltas: a modeling study”. The dataset contains two types of model output, namely (1) the default model runs and (2) the sensitity runs with waves+tides, waves only, and tides only.</p> <p>The files covering the default model runs contain:</p> <p>ModeledDays - time vector for the depth series [days]</p> <p>XT - east-west location of grid points high resolution domains [m]</p> <p>YT - north-south location of grid points high resolution domains [m]</p> <p>depth - depth series for the high resolution domains [m]</p> <p>XSea - east-west location of grid points outer sea domain [m]</p> <p>YSea - north-south location of grid points outer sea domain [m]</p> <p>depthSea - depth series for the outer sea domain [m]</p> <p>XBasin - east-west location of grid points basin domain [m]</p> <p>YBasin - north-south location of grid points basin domain [m]</p> <p>depthBasin - depth series for the basin domain [m]</p> <p>ST_Days - time vector for the sediment transport series [days]</p> <p>ST_Inlet - tidally-averaged total sediment transport through the inlet (positive seaward) [10<sup>6</sup> m<sup>3</sup>/year]</p> <p>ST_Up - tidally-averaged total sediment transport through the cross-section at the updrift coast (positive eastward) [10<sup>6</sup> m<sup>3</sup>/year]</p> <p>ST_Down - tidally-averaged total sediment transport through the cross-section at the downdrif coast (positive eastward) [10<sup>6</sup> m<sup>3</sup>/year]</p> <p>The files covering the sensitivity runs contain for the high resolution domains:</p> <p>XT - east-west location of grid points [m]</p> <p>YT - north-south location of grid points [m]</p> <p>TA_STX - east-west component of the tidally-averaged total sediment transport [m<sup>3</sup>/s/m]</p> <p>TA_STY - north-south component of the tidally-averaged total sediment transport [m<sup>3</sup>/s/m]</p> <p>TA_U - east-west component of the tidally-averaged flow velocities [m/s]</p> <p>TA_V - north-south component of the tidally-averagedf low velocities [m/s]</p> <p>M2 - amplitude of the semi-diurnal tidal flow velocities (not for wave only runs) [m/s] </p>
Data set - Lagrangian observations and modelling of turbulence along a tidally influenced river
<p>The 'Kaipara_model.mat' files contains the grid and bathymetry of a model of the Kaipara River, New Zealand, created notably in order to study turbulence in a Lagrangian frame of reference. </p> <p>The 'Dataset_Kaipara_Lagrangian.mat' file contains Lagrangian observations collected in the Kaipara river and corresponding model predictions. </p>
Data set - Lagrangian observations and modelling of turbulence along a tidally influenced river - Refined model
<p>The 'Dataset_Kaipara_Lagrangian_refined.mat' file contains Lagrangian observations collected in the Kaipara river and corresponding model predictions, after refinement of the model. </p> <p> </p> <p>The 'Kaipara_model_refined.mat' files contains the grid and bathymetry of a model of the Kaipara River, New Zealand, created notably in order to study turbulence in a Lagrangian frame of reference. </p>
GULF18, a high-resolution NEMO-based tidal ocean model of the Arabian/Persian Gulf
<p>Supporting data for the GMD draft paper "GULF18, a high-resolution NEMO-based tidal ocean model of the Arabian/Persian Gulf" (© Crown copyright Met Office):</p> <p>1) input_geometry_gulf_models: bathymetry, horizontal grid and domain (in the case of GULF18-4.0) files needed to run the three Gulf models and analyse their results.</p> <p>2) analysis_gulf_models: data for figures and analysis.</p>
GULF18, a high-resolution NEMO-based tidal ocean model of the Arabian/Persian Gulf
<p>SSH model outputs from GULF18-4.0 model described in Bruciaferri, D., Tonani, M., Ascione, I., Al Senafi, F., O'Dea, E., Hewitt, H. T., and Saulter, A.: GULF18, a high-resolution NEMO-based tidal ocean model of the Arabian/Persian Gulf, Geosci. Model Dev., 15, 8705–8730, https://doi.org/10.5194/gmd-15-8705-2022, 2022, (© Crown copyright Met Office).</p>
GULF18, a high-resolution NEMO-based tidal ocean model of the Arabian/Persian Gulf
<p>Supporting data for the GMD paper "GULF18, a high-resolution NEMO-based tidal ocean model of the Arabian/Persian Gulf" https://gmd.copernicus.org/articles/15/8705/2022/ :</p> <p>1) Ocean tempereature and salinity 3D fields to initialise GULF18-3.6 and GULF18-4.0 models on 2013-01-16.</p> <p>2) River runoff climatology.</p> <p>© Crown copyright Met Office</p>
Tidal Model's Effects on Emotion Regulation and Recovery
ClinicalTrials.gov study NCT06022497. IPD Sharing: NO. Countries: 1. Publications: 0.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.