Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
46
datasets available to search
ShareScore release 0.9.0
Dataset results
46 results for “boundary condition”
Flume Erosion Testing Data of Root-Permeated and Organic Matter Amended Soil Samples Using Three Streambank Boundary Conditions.
The data published here is expected to accompany one publicly available dissertation (Chapter 6 of dissertation) and one separate journal publication. Once published and available online, the metadata will be updated with the relevant article information. The journal article/dissertation will have additional information regarding the published datasets and the methods used to collect the data. All data collected from these studies, and the accompanying Acoustic Doppler Profiler MATLAB files, are presented here. Journal Article title: Artificial Roots and Soil Microorganisms Increase Soil Resistance to Fluvial Erosion
DuneFront deliverable D4.1 - Physical boundary conditions over European coasts
<p>The European project DuneFront (<a href="https://dunefront.eu">https://dunefront.eu</a>, <a href="https://cordis.europa.eu/project/id/101135410">https://cordis.europa.eu/project/id/101135410</a>) is working to improve coastal protection across Europe by using Nature-based Solutions (NbS), such as Dune-Dike hybrids (DD-hybrids), to defend coastlines from extreme weather and rising sea levels. Within this project, this “Physical Boundary Conditions” deliverable focuses on collecting and mapping key physical boundary conditions that affect the effectiveness of these solutions. The aim was to create a consistent, Europe-wide, high-quality dataset that helps understand how DD-hybrids are, and will be, affected by waves, tides, weather patterns, and climate change. </p> <p>The dataset is made of 5 geopackage files, each duplicated in csv format for accessibility. See the deliverable report (pdf) for detailed information on each file, use notes, and literature references. We explicitly recommend the use of the gpkg files over csv for any GIS application, for reasons that are detailed in the report.</p>
An experimental data set on the thermal and fluid dynamic performance of double skin facades (DSFs) subjected to various controlled boundary conditions through the use of a climate simulator facility
<p>Double skin facades (DSFs) are building envelope systems defined by complex phenomena and non-linear-processes that make characterizing their performance a non-trivial task. In an effort to enable the scientific community to access experimental data for further analysis or model validation purposes, we release together with the open-access paper entitled “<strong><em>Laboratory testbed and methods for flexible characterization of the thermal and fluid dynamic behavior of double skin facades” (</em></strong><a href="https://doi.org/10.1016/j.buildenv.2021.108700"><strong><em>https://doi.org/10.1016/j.buildenv.2021.108700</em></strong></a><strong><em>)</em></strong>, a set of experimental data collected during tests carried out with the use of the newly developed testbed. The data contains the results of a series of tests where various configurations of a full-scale DSF mock-up that have been subjected to different boundary conditions replicated in a climate simulator. The database contains a guide in the form of the file ‘Guide.pdf’, which explains how to read data, presents a schematic drawing of sensor layout, and provides more information on sensors’ positions. Further information on the original aims of the experiments, methods, and other data can be found in the article mentioned above, which becomes an essential tool to understand how to read and interpret the experimental data fully. The following collection of experimental data are provided:</p> <ul> <li>32 steady-state measurements where the following factors were changed: ventilation mode (indoor and outdoor air curtain), solar irradiance (0, 400, 600, and 800 Wm<sup>-2</sup>), outdoor chamber temperature (10, 20, 30, and 40 ℃), cavity depth (20, 30, 40 and 60 cm) and venetian blinds position (no blinds, closed blinds, θ=45 º, and open blinds) [file names: ‘Taguchi_4Lx4F_L16_I-I.csv’ and ‘Taguchi 4Lx4F_L16_O-O.csv’],</li> <li>Dynamic profile measurements corresponding to a typical hot summer day [Dynamic_profile_measurements.csv] and</li> <li>Calibration data [Callibration.csv].</li> </ul> <p>Any inquires on the experimental data<em> can be sent </em>to: aleksandar.jankovic@ntnu.no</p>
An experimental data set for the analysis of the thermophysical behavior of a single-story naturally ventilated double-skin façade (DSF) under summer boundary conditions
<p>Double-skin facades (DSFs) are adaptive building envelope elements that offer the possibility to dynamically interact with the heat and mass flow between indoor and outdoor environments. Though designed to provide better performance compared to more conventional envelope solutions, these façade systems may, in some cases, underperform and lead to an increase in energy use or in thermal discomfort if not properly designed and operated. One of the known problems is the risk of overheating, in hot periods, in the ventilated cavity. In order to analyze this effect, we have systematically investigated the performance of a single-story, naturally ventilated DSF. The DSF is operated in the so-called outdoor air curtain mode and has venetian blinds installed in the 20 mm deep ventilated cavity. Tests were carried out under a steady-state regime corresponding to relevant summertime conditions. In an effort to enable the scientific community to access experimental data to analyze this problem further or for model validation purposes, we released together with the open-access paper entitled "<strong>Characterization of a naturally ventilated double-skin façade through the design of experiments (DOE) methodology in a controlled environment</strong>," the entire set of experimental data collected during the tests. The data set contains the results of a series of experimental runs where different configurations of the DSF, as detailed below, have been subjected to various boundary conditions through a climate simulator facility equipped with a solar simulator device. The database is supported by a guide ("Guide.pdf"), where further explanations about how to read data and schematic drawings of the sensor layout are provided. Additional information about the original aims of the experiments, the detailed methods, and other data processing procedures can be found in the article mentioned above. The collection of experimental tests in this data set covers:</p> <ul> <li>49 steady-state measurements where the following factors were changed using different experimental designs: solar irradiance (0, 350, and 700 Wm<sup>-2</sup>), outdoor chamber temperature (15, 25, and 35 ℃), opening size (7, 21, and 42 dm<sup>2</sup>), and venetian blinds angle (closed blinds θ=0 º, θ=45 º, and open blinds θ=90 º) [file name: "Complete_data.csv"],</li> </ul> <p>Any inquiries about the experimental data can be sent to: <a href="mailto:aleksandar.jankovic@ntnu.no">aleksandar.jankovic@ntnu.no</a></p> <p>The activities presented in this paper were carried out within the research project "REsponsive, INtegrated, VENTilated - REINVENT – windows," supported by the Research Council of Norway through the research grant 262198, and the partners SINTEF, Hydro Extruded Solutions, Politecnico di Torino and Aalto University.</p>
Challenges of constructing and selecting the "perfect" initial and boundary conditions for the LES model PALM
<p><strong>README</strong></p> <p>All the supplementary data needed for the reproduction of the experiment described in the manuscript are provided on this ZENODO repository. The supplementary data includes the following:<br>1. IBC-pre-post-process-revised.zip which contains:<br> - Radio sounding data used for vertical profile statistical and visual comparison. They are stored as "CHMU-soundings.dat" in the CHMU_soundings directory<br> - code for making the figures for vertical profile comparison between the WRF and PALM model<br> - code for performing the statistical analysis for the vertical profiles of PALM and the WRF model<br> - code for making the scatter plots of PALM and WRF vertical profiles<br> - code for making the heatmaps of the PALM model data</p> <p>2. PALM_code.zip contains the source code for the current version of the PALM model used for this experiment</p> <p>3. palm_inputs.zip contains:<br> - static driver file<br> - dynamic driver file<br> - configuration files for the first PALM run (p3d), and the configuration files for the restart runs (p3dr)<br>for each of the performed simulations</p> <p>4. postproc.zip contains:<br> - the code for performing statistical analysis for minimum (min), average (Avg), and maximum (max) three-day averaged differences for the WRF and PALM model outputs<br> - the code for making figures of the differences between selected pairs of WRF and PALM model outputs</p> <p>5. wrf_namelist.zip contains:<br> - list of files in which the setups/configuration for the WRF ensemble used in this experiment</p> <p><strong>PALM MODEL INSTALLATION AND USAGE GUIDE</strong></p> <p>A. Installation:</p> <p>1. First, make sure to satisfy the Software Requirements. On Debian-based Linux Distributions, this can be achieved by the following command:</p> <p><code>sudo apt-get install gfortran g++ make cmake coreutils libopenmpi-dev openmpi-bin libnetcdff-dev netcdf-bin libfftw3-dev python3-pip python3-pyqt5 flex bison ncl-ncarg</code></p> <p>2. Also, some additional python dependencies are needed, which can be installed using pip. In case you want to use a virtual environment for these dependencies, please make sure to create one first. Afterwards, you can install the python dependencies by executing the following command:</p> <p><code>python3 -m pip install -r requirements.txt</code></p> <p>3. Now the PALM model system can be installed with the following commands (please replace with the desired installation directory):</p> <p><code>export install_prefix=""</code><br><code>bash install -p ${install_prefix}</code><br><code>export PATH=${install_prefix}/bin:${PATH}</code></p> <p>4. The following optional command permanently adds this installation to your bash environment:</p> <p><code>echo "export PATH=${install_prefix}/bin:\${PATH}" >> ~/.bashrc</code></p> <p>5. Type <code>bash install -h</code> to get all available options of the install script. During installation, the script calls the respective install script of all packages in this repository and installs them to the chosen directory. Therefore, it is not necessary to manually install any of the packages.</p> <p>You can test your installation with the following commands:</p> <p><code>palmtest --cases urban_environment_restart --cores 4</code></p> <p>B. Usage:</p> <p>After a successful installation, the executables for all packages have been linked into the directory /bin and a default PALM configuration file can be found at /.palm.config.default. In case you have installed the python dependencies inside a virtual environment, that environment needs to be active whenever you wand to use PALM. For usage of each of the packages, please refer to their individual documentation. Next, you need to create your first PALM setup in order to start a simulation. To get a simple preconfigured setup and start your first PALM simulation, please execute the following sequence of commands:</p> <p><code>mkdir -p "${install_prefix}/JOBS/example_cbl/INPUT"</code><br><code>cp "packages/palm/model/tests/cases/example_cbl/INPUT/example_cbl_p3d" "${install_prefix}/JOBS/example_cbl/INPUT/"</code><br><code>cd ${install_prefix}</code><br><code>palmrun -r example_cbl -c default -a "d3#" -X 4 -v -z</code></p>
Development and analysis of entropy stable no-slip wall boundary conditions for the Eulerian model for viscous and heat conducting compressible flows
<p>The database used in the submission of "Development and analysis of entropy stable no-slip wall boundary conditions implementation of the Eulerian model for viscous and heat conducting compressible flows."</p> <p>Abstract: Nonlinear entropy stability analysis is used to derive entropy stable no-slip wall boundary conditions for the Eulerian model proposed by Svärd ( <em>Physica A: Statistical Mechanics and its Applications, 2018 </em>). and its spatial discretization based on entropy stable collocated discontinuous Galerkin operators with the summation-by-parts property for unstructured grids. A set of viscous test cases of increasing complexity are simulated using both the Eulerian and the classic compressible Navier–Stokes models. The numerical results obtained with the two models are compared, and differences and similarities are then highlighted.</p>
Cyclic test data of six unreinforced masonry walls with different boundary conditions
<p>Previous test data on unreinforced masonry walls focused on the global response of the wall. A new dataset on six wall tests, which is publically available, allows linking global to local deformations of masonry walls, which can be useful for advancing performance-based design and assessment methods for unreinforced masonry buildings. This data paper presents the<br> results of a test series on six identical unreinforced masonry walls that were constructed using hollow clay brick units and standard cement-based mortar.<br> The test units were subjected to quasi-static cycles of increasing drift demands and the tests differed with regard to the applied axial load and the moment restraint applied at the top of the walls. The walls were tested up to failure. Throughout the loading the deformations of the walls were recorded using a digital photogrammetric measurement system tracking the movement of 312 points per test unit.</p>
Near-surface rheology and hydrodynamic boundary condition of semi-dilute polymer solutions
<p>Data appearing in the figures of the article DOI:10.1039/D0SM02116D.</p>
An experimental data set for analysis of the thermophysical behavior of a single-story mechanically ventilated double-skin façade (DSF) in fixed boundary conditions corresponding to winter/mid-season and summer cases
<p>Double-skin facades (DSFs) are dynamic and flexible building envelopes that employ a ventilated cavity to either prevent or reduce the solar-induced cooling load or exploit solar energy for passive solar heating. The mechanical ventilation of the cavity offers higher flexibility and control than natural ventilation, as the latter largely depends on stochastic and unpredictable external conditions. Furthermore, when mechanical ventilation rates are combined with the operation of a shading device, the possibilities for controlling the accumulated heat in the cavity of the DSF increase further. Therefore, this experimental campaign systematically investigates how these two important features interact in controlling the cavity's thermal load and airflow conditions. The measurement collected during the experiments constitutes a dataset that contains the results of a series of experimental runs where the different configurations of DSF, in terms of mechanical ventilation rate and venetian blinds, have been subjected to two representative boundary conditions through a climate simulator facility equipped with a solar simulator device. The full-scale DSF mock-up, which includes venetian blinds installed in a 200 mm ventilated cavity, is operated in this experiment in two modes: outdoor air curtain (OAC) and supply air (SA) mode. Tests were carried out under a steady-state regime with different boundary conditions. For the analysis of the utilization of the excess heat accumulated in the cavity and prevention of DSF overheating, boundary conditions corresponding to g-value calculations were selected. For the analysis of air preheating in the DSF cavity, the boundary conditions corresponding to late winter/mid-season weather (cold outdoor air and low-to-moderate solar irradiance) were chosen. The entire set of experimental data collected during the tests is made publicly available to enable the scientific community to access experimental data to further analyze this problem or for model validation purposes. The data set supplements the open-access paper entitled "<strong>Control of heat transfer in single-story mechanically ventilated facades</strong>" (<a href="https://doi.org/10.1016/j.enbuild.2022.112304">https://doi.org/10.1016/j.enbuild.2022.112304</a>), where additional information about the aims of the experiments, the detailed methods, and other data processing procedures can be found. The database is supported by a guide ("Guide.pdf"), where further explanations about how to read data and schematic drawings of the sensor layout are provided. The collection of experimental tests is divided into two files, according to two considered cases:</p> <ul> <li><strong>DSF operating in outdoor air curtain mode </strong>(24 steady-state measurements). The following factors were changed: mechanical ventilation rate (0, 10, 15, 20, 30, 40, 50, and 100 % of maximum fan power) and venetian blind configuration (closed θ=0 º, semi-open θ=45 º, and raised blinds). The outdoor and indoor temperatures, 30 ℃ and 25 ℃, and solar irradiance of 500 Wm<sup>-2</sup> were replicated. [file name: "Summer.csv"],</li> <li><strong>DSF operating in supply air mode</strong> (27 steady-state measurements). The following factors were changed: mechanical ventilation rate (0, 10, 15, 20, 30, 40, 50, 75, and 100 % of maximum fan power) and venetian blind configuration (closed θ=0 º, semi-open θ=45 º, and raised blinds). The outdoor and indoor temperatures, 10 ℃ and 25 ℃, and solar irradiance of 300 Wm<sup>-2</sup> were replicated. [file name: " Winter_MidSeason.csv"]</li> </ul> <p>Any inquiries about the experimental data can be sent to: <a href="mailto:aleksandar.jankovic@ntnu.no">aleksandar.jankovic@ntnu.no</a></p> <p>The activities presented in this paper were carried out within the research project "REsponsive, INtegrated, VENTilated - REINVENT – windows," supported by the Research Council of Norway through the research grant 262198, and the partners SINTEF, Hydro Extruded Solutions, Politecnico di Torino and Aalto University.</p>
IPSL-CM5A2. An Earth System Model designed for multi-millennial climate simulations: Boundary conditions and outputs.
<p>Inputs, boundary conditions, and ouputs files of the experiments described in Sepulchre et al. manuscript "<em>IPSL-CM5A2. An Earth System Model designed for multi-millennial climate simulations</em>" submitted for publication to Geoscientific Model Development:</p> <p><a href="https://www.geosci-model-dev-discuss.net/gmd-2019-332"><strong>https://www.geosci-model-dev-discuss.net/gmd-2019-332</strong></a></p> <p>The 90Ma_IPSLCM5A2_inputs.tar tarball contains the input and boundary files used to run the 3,000-year Cretaceous experiment.</p> <p>The output_files.tar tarball contains the netcdf output files of the preindustrial, historical and Cretaceous simulations analyzed in the manuscript. Diagnoses are presented through a Jupyter notebook that can be retrieved and played interactively <strong><a href="https://doi.org/10.5281/zenodo.3549652"><strong>here</strong></a>.</strong></p> <p><strong> </strong></p>
Ocean model simulations in cold-water coral ecosystems off the coasts of Angola and Namibia in the Southeast Atlantic: Setup, boundary conditions and model results.
<p>The dataset contains all essential data for the setup of high-resolution local area model implementations using the ROMS-AGRIF model version 3.1 in two cold-water coral regions off the coasts of Angola and Namibia in the Southeast Atlantic. The data include computational grids, initialization fields (temperature, salinity), and boundary conditions (temperature, salinity, currents, and sea surface height) for each model area. It also includes model output, which has been used in different studies of the local oceanography of the region .</p> <p>Initialization, forcing and output data for each ROMS-AGRIF model implementation are provided in two compressed archive data files:</p> <ul> <li>Angola Margin: Angola_Model_Setup1.7z</li> <li>Namibia Margin: Namibia_Model_Setup1.7z</li> </ul> <p>The data set description is provided in the file:</p> <ul> <li>DataSet_Description_Angola_Namibia_Model.pdf</li> </ul> <div> <div> <div> <div> <div> <div> <div> <div> <div> <div> <div> <div> <div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div> </div>
The velocity boundary conditions of the model, the static Coulomb stress, displacement and the direction of the maximum principal stressin in Weiyuan area,China
<p>The velocity boundary conditions of the model, the displacement, the static coulomb stress and the direction of the maximum principal stress data in Weiyuan area, Sichuan Province, China, calculated by numerical simulation method. The calculation time is 10 years and 50 years after fracturing, respectively. The data include longitude, latitude, depth and corresponding calculation results. The parameters are: fracture volume-to-model volume ratio (θ) , the fractures distributed radius (γ) around the wells. </p>
Model run with METROMS to evaluate open boundary conditions in CICE [idealized wind]
<p>Support for time-varying open boundary conditions (OBC) have been developed for sea ice in the Los Alamos Sea Ice Model (CICE) by Pedro Duarte (NPI, Norway). This dataset is a result of using the coupled ocean (ROMS) and sea ice (CICE) modelling framework METROMS (<a href="https://github.com/metno/metroms">https://github.com/metno/metroms</a>) in order to test the effects of the above mentioned boundary conditions. The specific application of METROMS that was used was MET Norway's main forecasting system for the Barents Sea; the Barents-2.5km model; details about the model can be found at <a href="https://ocean.met.no/models">https://ocean.met.no/models</a>.</p> <p>The model was initialized from the TOPAZ4 model (Sakov et al., 2012)<strong> </strong>and was run for the period 2019.09.01 - 2019.09.20, one time without OBC and one time with OBC enabled using input data from TOPAZ4<strong> </strong>at the boundaries. In both runs the model was set up realistically, but with the exception of idealized wind forcing. More specifically, the wind was blowing 10 m/s in the positive xi-direction until 2019-09.07 and then 10/m/s in the negative xi-direction for the rest of the simulation. The reasoning for this was to clearly demonstrate the effects of the OBC. Initially, the wind is blowing the ice away from the boundary and without using OBC for ice, it leaves open water in its path due to no information coming in through the boundary. With OBC enabled however, the simulation appear a lot more sensible with sea ice from TOPAZ4 coming in through the boundaries. When the wind switches to the opposite direction after 2019.09.07, on the case without OBC results in ice piling up at the boundary after some time. However, with OBC enabled, the ice exists the model domain.</p> <p> </p>
Model run with METROMS to evaluate open boundary conditions in CICE
<p>Support for time-varying open boundary conditions (OBC) have been developed for sea ice in the Los Alamos Sea Ice Model (CICE) by Pedro Duarte (NPI, Norway). This dataset is a result of using the coupled ocean (ROMS) and sea ice (CICE) modelling framework METROMS (<a href="https://github.com/metno/metroms">https://github.com/metno/metroms</a>) in order to test the effects of the above mentioned boundary conditions. The specific application of METROMS that was used was MET Norway's main forecasting system for the Barents Sea; the Barents-2.5km model; details about the model can be found at <a href="https://ocean.met.no/models">https://ocean.met.no/models</a>.</p> <p>The model was initialized from the TOPAZ4 model (Sakov et al., 2012)<strong> </strong>and was run for the period 2019.09.01 - 2019.10.03, one time without OBC and one time with OBC enabled using input data from TOPAZ4<strong> </strong>at the boundaries. This dataset can further be used to compare with satelite observations of sea ice concentration in order to help evaluate the impacts of the OBC's in CICE.</p>
Impact hammer test of an Aluminium 6082 T6 plate, 260 x 246 x 1.5 mm, free boundary conditions
<p>Plate data</p> <p>------------</p> <p>E = 70 GPa</p> <p>ν = 0.33</p> <p>ρ = 2700 kg/m^3</p> <p>h = 1.50 mm (±0.01mm)</p> <p>width = 246 mm</p> <p>length = 260 mm</p> <p> </p> <p>Experiment description</p> <p>-----------------------------</p> <p>- a Cartesian coordinate system (XYZ) is defined in one of the corners of the plate, with XY laying on the mid-plane of the plate;</p> <p>- the X axis is aligned with the length direction;</p> <p>- the Y axis is aligned with the width direction;</p> <p>- the free boundary conditions are approximated experimentally by means of soft cotton wires, and the plate is tested while hanging on the cotton wires that are fixed at two corners, by means of adhesive tapes;</p> <p>- a mesh of 5 by 5 points is defined on the plate, with the following coordinates (in meters):</p> <pre><code class="language-python">1, [0., 0.] 2, [0.065, 0.] 3, [0.13, 0.] 4, [0.195, 0.] 5, [0.26, 0.] 6, [0., 0.0615] 7, [0.065, 0.0615] 8, [0.13, 0.0615] 9, [0.195, 0.0615] 10, [0.26, 0.0615] 11, [0., 0.123] 12, [0.065, 0.123] 13, [0.13, 0.123] 14, [0.195, 0.123] 15, [0.26, 0.123] 16, [0., 0.1845] 17, [0.065, 0.1845] 18, [0.13, 0.1845] 19, [0.195, 0.1845] 20, [0.26, 0.1845] 21, [0., 0.246] 22, [0.065, 0.246] 23, [0.13, 0.246] 24, [0.195, 0.246] 25, [0.26, 0.246]</code></pre> <p>- the accelerometer is fixed at point 5;</p> <p>- the time-response to the hammer impact is obtained for each point by hitting with the impact hammer at each point;</p> <p>- three time-response data points are obtained at each point;</p> <p>- for all measurements a total of 2^15 = 32768 time samples are obtained, corresponding to a time interval of 0 <= t <= 3.840 s, and a minimum sampling rate of 8000 Hz. </p> <p> </p> <p>Details about the hardware</p> <p>----------------------------------</p> <p>1) Data Acquisition Module NI 9234</p> <p>With four input channels simultaneously acquire at rates up to 51.2 kS/s (kilosamples per second). The operating temperature limits are from -40 °C to 70 °C, maximum of 5 g vibration, and maximum of 50 g shock.</p> <p>2) Impact hammer with load cell 086C02</p> <p>The first channel corresponds to the impact hammer load cell measurements, in Newtons [N]. The hardware sensitivity (+-15%) is 50 mV/lbf or 11.2 mV/N.</p> <p>3) Unidirectional Accelerometer 352A24</p> <p>The second channel corresponds to the accelerometer measurements, in gravity units [g], being 1 gravity unit = 9.81 m/s^2. The hardware sensitivity (+-10%) is 100 mV/g or 10.2 mV/(m/s^2).</p> <p> </p> <p> </p> <p>Reading the experimental data</p> <p>--------------------------------------</p> <p>I use the https://nptdms.readthedocs.io/en/stable/quickstart.html module to read the experimental data saved with the "*tdms" extension. The following example illustrates how to read the data at all the points:</p> <pre><code class="language-python">from nptdms import TdmsFile # reading from the experimental results # - the hammer impact force in [N] as a function of time from df.iloc[:, 0] # - the accelerations in [g] as a function of time from df.iloc[:, 1] times = {} hammer_impacts = {} accelerometer = {} for point in usedpoints: tdms = TdmsFile('WaveForms Point%02d.tdms' % point) df = tdms.as_dataframe() df.index = df.index/df.shape[0] * tmax times[point] = df.index hammer_impacts[point] = df.iloc[:, 0] accelerometer[point] = df.iloc[:, 1]</code></pre> <p> </p> <p> </p> <p>Plate model</p> <p>----------------</p> <p>In file "plate_model.py" you can find a validated vibration model of the plate, based on the Python package:</p> <blockquote> <p>Castro, S.G.P. Supporting code for Stability and Analysis of Structures II, Department of Aerospace Structures and Materials, Delft University of Technology, 2023. <a href="https://doi.org/10.5281/zenodo.2583004">DOI: 10.5281/zenodo.2583004</a>.</p> </blockquote>
Jupiter Atmospheric Models and Outer Boundary Conditions for Giant Planet Evolutionary Calculations
<p>This data set consists of 1D radiative-convective equilibrium boundary conditions for Jupiter-like giant planets, computed using coolTLUSTY and a recently updated set of molecular absorption cross sections. Models span internal temperatures of 80 - 450 K, and surface gravities of log10(g / [cm/s^2]) = 1.8 - 3.6. The planet is irradiated by a black body star at a distance of 5.2AU with effective temperature of 5777K with the zenith angle factor (accounting for an average incident angle) being FACFLX=0.5 or 0.67. The models assume a composition of 3.16x solar abundance, and allow the formation of ammonia clouds at low temperatures with characteristic sizes of 1 or 3 micron. More numerical details on the treatments of irradiation and clouds can be found in "Jupiter Atmospheric Models and Outer Boundary Conditions for Giant Planet Evolutionary Calculations", arXiv number TBA.</p> <p>See README.txt for a description of data formats.</p>
Surface Charge Boundary Condition Often Misused in CO2 Reduction Models (raw data for graphs)
<p>This contains the raw data, in text file format, for the figures in the journal article "Surface Charge Boundary Condition Often Misused in CO2 Reduction Models" published in Journal of Physical Chemistry C, DOI 10.1021/acs.jpcc.3c05364.</p> <p>The files are in directories corresponding to their figure number, and the files are named with the capacitance. </p> <p> </p> <p> </p>
Electrostatic OAM generator with boundary condition - Phase images of the boundary conditions
<p>Here reported is the dataset that can be used to reconstruct the phase of the electron beam (process already done for the files which have a C_P in the name) after it has interacted with the electrodes that are used as boundary condition for our electrostatic variable electron vortex beam generator that allow to improve its functioning.</p> <p> </p>
Developing Implementable Climatic Input Data and Moisture Boundary Conditions for Pavement Analysis and Design
<p>Corresponding data set for Tran-SET Project No. 18POKS03. Abstract of the final report is stated below for reference:</p> <p>"The main objective of this study is to develop a practical and implementable numerical model for predicting the moisture (suction) regime within the pavement subgrade system. The research quality and uniformly-dispersed climate data over short distances from Oklahoma Mesonet and the Mitchell based moisture (suction) prediction methods establish the main background of the research study. The study involved numerical modeling and statistical analysis of climatic weather data. The proposed moisture variation model predicts the suction distribution throughout the soil subgrade by solving the diffusion equation and incorporates the measured suction from the Oklahoma Mesonet to estimate the diffusion coefficient. The research study resulted in a practical prediction model that could be used to determine the moisture boundary conditions within the pavement structure."</p>
Simulations of proglacial forefield morphodynamics and sediment transport to changing boundary conditions
<p>This dataset includes the simulated sediment flux records, stream statistics (braiding index and bar proprieties), DEMs and inundation maps of a proglacial forefield under different boundary conditions. Further information are available in: </p> <p>Mancini, D., Nicholas, A.P., Roncoroni, M., Müller, T., Jenkin, M., Miesen, F., Dietze, M., Calvo, F. & Lane, S.N. (submitted). Simulations of proglacial forefield morphodynamics and their implications for the filtering of subglacial sediment export following glacier retreat. <em>Earth Surface Processes and Landforms</em>.</p> <p>General information:</p> <ul> <li>Domain size: 462 x 125 pixels</li> <li>Time step (sediment fluxes): 0.005 days</li> <li>Time tep (inundation maps, DEMs and stream stats): 0.2 days</li> </ul> <p>The model used to produce them is called eRiDynaS, and enquiries regarding its availability should be directed to a.p.nicholas@exeter.ac.uk.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.