Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
1,530
datasets available to search
ShareScore release 0.9.0
Dataset results
1,530 results for “choices”
Social Decision-Making Risky Choice Task Dataset
Open the record for dataset details and reuse information.
Density independent prey choice, taxonomy, life history and web characteristics determine the diet and biocontrol potential of spiders (Linyphiidae and Lycosidae) in cereal crops - Dataset
<p>Materials and Methods</p> <p>Fieldwork</p> <p>Money spiders (Araneae: Linyphiidae) and wolf spiders (Araneae: Lycosidae) were the two most common families present in these field surveys, so were prioritised for collection. Spiders were visually located along transects in two adjacent barley fields at Burdons Farm, Wenvoe in South Wales (51°26'24.8"N, 3°16'17.9"W) and collected from occupied webs and the ground, between April and September 2018. Surveys and sampling were conducted five days per week across this period. Each transect was adjacent to a randomly selected tramline and they were distributed across the entire field. The areas searched were 4 m<sup>2</sup> quadrats at least 10 m apart and all observed linyphiids and lycosids were collected in approximately 15-minute searches. The spiders included in this study were taken from 64 locations across 24 days (Supplementary Table 3) along the aforementioned transects. Spiders were individually placed into 1.5 ml microcentrifuge tubes containing 100 % ethanol using an aspirator, regularly changing meshing, at least every five spiders, to limit potential cross-contamination between spiders (spiders were also subsequently washed during transferral to fresh ethanol at the identification and, separately, dissection stages). Linyphiids occupying webs were prioritised for collection, but ground-active linyphiid spiders were also collected. For each spider taken from a web, the height of the web from the ground and its approximate dimensions were recorded, the latter calculated as approximate web area. Spiders were taken to Cardiff University, transferred to fresh ethanol, adults identified to species-level and juveniles to genus, and stored at -80 °C in 100 % ethanol until subsequent DNA extraction. To obtain data on local prey density, 4 m<sup>2</sup> of ground and crop stems were suction sampled using a ‘G-vac’ for 30 seconds at each quadrat from which spiders were collected, with the collected material emptied into a bag, any organisms immediately killed with ethyl-acetate and material frozen for storage before sorting into 70 % ethanol in the lab.</p> <p>All invertebrates were identified to family level due to the restriction of many of the metabarcoding-derived dietary data to this level, and the difficulty associated with finer taxonomic resolution of many taxa. Exceptions included springtails of the superfamily Sminthuroidea (Sminthuridae and Bourletiellidae, which were often indistinguishable following suction sampling and preservation due to the fine features necessary to distinguish them) which were left at super-family, mites (many of which were immature or in poor condition) which were identified to order level and wasps of the superfamily Ichneumonoidea (which were identified no further due to obscurity of wing venation due to damage).</p> <p> </p> <p>Extraction and high-throughput sequencing of spider gut DNA</p> <p>Given their prevalence in field collections, dietary analysis was carried out for the linyphiid genera <em>Erigone</em>, <em>Tenuiphantes</em>, <em>Bathyphantes</em> and <em>Microlinyphia </em>(Araneae: Linyphiidae), and the Lycosidae genus <em>Pardosa</em>. Spiders were transferred to and washed in fresh 100 % ethanol to reduce external contaminants prior to identification via morphological key <sup>1</sup>. Abdomens were removed from spiders and again washed in and transferred to fresh 100 % ethanol. DNA was extracted from the abdomens via Qiagen TissueLyser II and DNeasy Blood & Tissue Kit (Qiagen) as per the manufacturer protocol, but with an extended lysis time of 12 hours to account for the complex and branched gut system in spider abdomens <sup>2</sup>. At least one extraction negative (blank tubes treated identically to samples) was included per 12 spiders (each extraction typically contained 24 spiders, thus two extraction negatives), which was included in subsequent PCR and high-throughput sequencing to detect instances of lab/reagent contamination.</p> <p>For amplification of DNA, two primer pairs were used. BerenF-LuthienR <sup>3</sup> amplified a broad range of invertebrates including spiders, and TelperionF-LaureR, amplified a range of invertebrates but fewer spiders (modified from TelperionF-LaurelinR <sup>3</sup> via one base-pair change from Laurelin; 5’-ggrtawacwgttcawccagt-3’). Primers were labelled with unique 10 bp molecular identifier tags (MID-tags) so that each individual had a unique pairing of forward and reverse tags for identification of each spider post-sequencing. PCR reactions of 25 µl contained 12.5 µl Qiagen PCR Multiplex kit, 0.2 µmol (2.5 µl of 2 µM) of each primer and 5 µl template DNA. Reactions were carried out in the same thermocycler, optimised via temperature gradient, with an initial 15 minutes at 95 °C, 35 cycles of 95 °C for 30 seconds, the primer-specific annealing temperature for 90 seconds and 72 °C for 90 seconds, respectively, followed by a final extension at 72 °C for 10 minutes. BerenF-LuthienR and TelperionF-LaureR used annealing temperatures of 52 °C and 42 °C, respectively.</p> <p>Within each PCR 96-well plate, 12 negative controls (extraction and PCR), 2 blank controls and 2 positive controls were included (i.e. 80 samples per plate), based on Taberlet <em>et al. </em>(2018). Positive controls were mixtures of invertebrate DNA comprised of non-native Asiatic species in four different proportions (Supplementary Table 1) and blanks were empty wells within each plate to identify tag-jumping into unused MID-tag combinations. PCR negative controls were DNase-free water treated identically to DNA samples. A negative control was present for each MID-tag to identify any contamination of primers. All PCR products were visualised in a 2 % agarose gel with SYBRSafe (Thermo Fisher Scientific, Paisley, UK) and placed in categories based on their relative brightness. The concentration of these brightness categories was quantified via Qubit dsDNA High-sensitivity Assay Kits (Thermo Fisher Scientific, Waltham, MA, USA) with at least three representatives of each category per plate. The PCR products were then proportionally pooled according to these concentrations. Each pool was cleaned via SPRIselect beads (Beckman Coulter, Brea, USA), with a left-side size selection using a 1:1 ratio (retaining ~300-1000 bp fragments). The concentration of the pooled DNA was then determined via Qubit dsDNA High-sensitivity Assay Kits and pooled together into one library per primer pair. Library preparation for Illumina sequencing was carried out on the cleaned libraries via NEXTflex Rapid DNA-Seq Kit (Bioo Scientific, Austin, USA) and samples were sequenced on an Illumina MiSeq via a V3 chip with 300-bp paired-end reads (expected capacity ≤25,000,000 reads). Bioinformatic analysis followed (Drake et al., 2021; Supplementary Information 1).</p> <p> </p> <p>Statistical analysis</p> <p>All analyses were conducted in R v4.0.0 <sup>6</sup>. Initial multivariate analyses used binary data (i.e., presence/absence) given the various problems inherent to quantifying metabarcoding data <sup>7,8</sup>. Prey species that occurred only once across all of the dietary samples were removed before further analyses to prevent outliers skewing the results, which is particularly problematic for non-metric multidimensional scaling. Spider diets were compared between variables using multivariate generalized linear models (MGLMs) via ‘manyglm’ in the ‘mvabund’ package <sup>9</sup> with a binomial error family and Monte Carlo resampling. Model independent variables included spider genus, spider life stage (juvenile or adult, the latter defined by fully developed genitalia), spider sex and all two-way interactions between these variables. Pairwise two-way interactions were also included between the aforementioned variables and Julian day to account for how seasonality may affect these relationships.</p> <p>Coarse dietary differences were visualised by non-metric multidimensional scaling (NMDS) via metaMDS in the ‘vegan’ package <sup>10</sup> with Jaccard distance in two dimensions and 999 tries. For NMDS, outliers (usually samples containing rare taxa) were identified by plotting and subsequently removed to facilitate separation of samples and achieve minimum stress. For visualisation of the effect of categorical variables against the dietary NMDS, spider plots were created using ‘ordispider’ with ‘ggplot’ and the ‘RColorBrewer’ ‘Accent’ colour palette <sup>11</sup>. Spider diet was compared against web characteristics for spiders for which both data were available using the MGLM process outlined above, but with starting models containing web height, web area, an interaction between the two, and pairwise interactions between genus, life stage and sex with the two web variables. This model used the same binomial error family as above, but with a ‘cloglog’ link function. For visualisation of the effect of continuous variables against the NMDS, surf plots were created with scaled coloured contours using the function “ordisurf” of the “ggplot” package in R.</p> <p>All prey taxa were classified as agricultural pests, natural enemies or excluded from subsequent analyses of intraguild predation and biocontrol (Supplementary Table 2). Intraguild predation and biocontrol variables were created by counting the number of natural enemy taxa, and, separately, of agriculturally relevant “pest” taxa (taxa containing species that commonly adversely affect agricultural productivity; Supplementary Table 2) in each spider’s diet. These resultant count data (effectively the diversity of pests and natural enemies predated by each individual spider) were separately analysed against spider genus, life stage and sex via GLM. “Site” (denoting the 4 m<sup>2</sup> area from which spiders were collected within fields) was initially included as a random effect in generalized linear mixed-models, but no significant effect was observed when comparing this model against a standard GLM via a likelihood ratio test of nested models using the ‘lrtest’ command in the ‘lmtest’ package <sup>12</sup>. Standard GLMs were thus used to avoid issues relating to singularity in the mixed models. The assumptions for the resultant Poisson error family GLMs were tested using the “testResiduals” function of the ‘DHARMa’ package <sup>13</sup>. Intraguild predation and biocontrol differences between significant terms were visualised using violin plots with the quartiles, median and 95 % upper limit annotated using the ‘geom_violin’ function in ‘ggplot2’.</p> <p><em>In situ</em> spider prey choice was analysed using network-based null models in the ‘econullnetr’ package <sup>14</sup> with the ‘generate_null_net’ command, visually represented with the ‘plot_preferences’ command. Binary dietary data were used alongside suction sample count data to represent prey availability. These suction sample data, as described above, were collected at the same sites as the spiders three days after spider collection. Prior to the taxonomic prey choice analysis, an hemipteran identified no further than order level through dietary analysis was removed due to the inability to pair it to any present prey taxa with certainty. Standardised effect sizes (SES) were extracted for all comparisons for each individual spider and compared between genera, life stages and sexes using permutational multivariate analysis of variance (PerMANOVA) using the ‘adonis’ function of the ’vegan’ package with 9999 permutations and a Euclidean distance matrix to determine overall differences in prey choice.</p> <p> </p> <p>References</p> <p>1. Roberts, M. J. <em>The Spiders of Great Britain and Ireland (Compact Edition)</em>. (Harley Books, 1993).</p> <p>2. Krehenwinkel, H., Kennedy, S., Pekár, S. & Gillespie, R. G. A cost-efficient and simple protocol to enrich prey DNA from extractions of predatory arthropods for large-scale gut content analysis by Illumina sequencing. <em>Methods Ecol. Evol.</em> <strong>8</strong>, 126–134 (2017).</p> <p>3. Cuff, J. P. <em>et al.</em> Money spider dietary choice in pre- and post-harvest cereal crops using metabarcoding. <em>Ecol. Entomol.</em> <strong>46</strong>, 249–261 (2021).</p> <p>4. Taberlet, P., Bonin, A., Zinger, L. & Coissac, E. <em>Environmental DNA</em>. (Oxford University Press, 2018).</p> <p>5. Drake, L. E. <em>et al.</em> An assessment of minimum sequence copy thresholds for identifying and reducing the prevalence of artefacts in dietary metabarcoding data. <em>Methods Ecol. Evol.</em> <strong>in press</strong>, (2021).</p> <p>6. R Core Team. R: A language and environment for statistical computing. (2020).</p> <p>7. Deagle, B. E., Thomas, A. C., Shaffer, A. K. & Trites, A. W. Quantifying sequence proportions in a DNA-based diet study using Ion Torrent amplicon sequencing: which counts count? <em>Mol. Ecol. Resour.</em> <strong>13</strong>, 620–633 (2013).</p> <p>8. Deagle, B. E. <em>et al.</em> Counting with DNA in metabarcoding studies: How should we convert sequence reads to dietary data? <em>Mol. Ecol.</em> <strong>28</strong>, 391–406 (2019).</p> <p>9. Wang, Y., Naumann, U., Wright, S. T. & Warton, D. I. mvabund – an R package for model-based analysis of multivariate abundance data. <em>Methods Ecol. Evol.</em> <strong>3</strong>, 471–474 (2012).</p> <p>10. Oksanen, J. <em>et al.</em> vegan: Community Ecology Package. (2016).</p> <p>11. Neuwirth, E. RColorBrewer: ColorBrewer palettes. (2014).</p> <p>12. Zeileis, A. & Hothorn, T. Diagnostic checking in regression relationships. <em>R News</em> <strong>2</strong>, 7–10 (2002).</p> <p>13. Hartig, F. DHARMa: residual diagnostics for hierarchical (multi-level/mixed) regression models. (2020).</p> <p>14. Vaughan, I. P. <em>et al.</em> econullnetr: an r package using null models to analyse the structure of ecological networks and identify resource selection. <em>Methods Ecol. Evol.</em> <strong>9</strong>, 728–733 (2018).</p>
Compilation of Digital Tools on Food Green House Gas Mitigation (CHOICE Project)
<p>A compilation of digital tools to support behaviour change and action to food mitigation measures. The compilation was created for the CHOICE Horizon Europe project (Grant Agreement -101081617).</p>
Dataset and replication information for It's About Time: How to Study Intertemporal Choice in Systems Design
<p>Dataset and replication package for the paper <em>It's About Time: How to Study Intertemporal Choice in Systems Design</em> (Fagerholm, F., De los Ríos, A., Cárdenas Castro, C., Gil, J., Chatzigeorgiou, A., Ampatzoglou, A., Becker, C. (2023). It’s About Time: How To Study Intertemporal Choice in Systems Design. Information and Software Technology.). The dataset consists of answers to a scenario-based questionnaire that collects data on intertemporal choice in the context of software development. An analysis script is provided to show the details of the calculations and analyses performed for the paper. The replication package includes the protocol for data collection sessions and different versions of the task scenario and questionnaire. More information is given in the description file.</p>
The influence of choice on feeding preferences of marine herbivores
These data describe the preferences of two herbivores, the wavy turban snail Megastraea undosa and the Pacific purple urchin Strongylocentrotuts purpuratus for 14 macroalgal species relative to giant kelp Macrocystis pyrifera and the role chemical defenses play in influencing herbivory. Data cover the raw grams consumed and total phenolic content of 15 total macroalgal species found in the Santa Barbara Channel and are taken from three Santa Barbara Coastal Long Term Ecological Research sites (Mohawk Reef, Arroyo Burro Reef, and Naples Reef).
Destination Choice Model including panel datausing WiFi localization in a pedestrian facility
<p>A minimal example of a destination choice model including panel data on EPFL campus. It is based on the output of Danalet<em> et al. </em>(2014)<em>.</em> </p> <p>It runs on Pythonbiogeme. Some variables are removed from the dataset due to privacy issues. Thus, some parameters may not be significant.</p>
MINIATURA 6 Housing decisions, behavioral aspects of choices, price expectations and anchoring effect - Polsh case study
<p>The data was created as a result of a survey conducted in accordance with the guidelines: - the survey questionnaire consisted of approximately 30 questions and a form, - the surveyed population was defined as 1,000 households living in a large Polish city (over 450,000 inhabitants), quota selection based on the number of city inhabitants, - CAWI method (online), - completion date: 1 week. The survey was parameterized. Part of the sample is a control trial, part is an experimental trial.</p><p>Dane powstały w wyniku przeprowadzonej ankiety zgodnie z wytycznymi: - kwestionariusz badania składał się z ok. 30 pytań oraz metryczki, - badana zbiorowość określono na 1000 gospodarstw domowych zamieszkałych w dużym mieście Polski (powyżej 450 tys. ludności), dobór kwotowy na podstawie liczby mieszkańców miast, - badanie metodą CAWI (on-line), - termin realizacji 1 tydzień. Ankieta byłą sparametryzowana. Część próby stanowi próba kontrolna, część próba eksperymentalna. </p>
Choice of the right supporting electrolyte in electrochemical reductions: a principal component analysis
<h2>Introduction</h2> <p>This dataset contains the raw data as well as an HTML-based visualization of our dataset using Python Bokeh. We have also added a feature to highlight commercially available supporting electrolytes. The data is taken from the PubChem database. For each of the 6650 cations, the known neutral compounds in the PubChem dataset were identified with their corresponding anions. For each of these compounds, the vendor information stored in PubChem was queried.</p> <h2>Directory structure</h2> <ul> <li>Raw Data <ul> <li>[<a href="../records/10813969/files/raw_data.tar.xz?download=1" target="_blank" rel="noopener">raw_data.tar.xz</a>] Compressed directory with the output from the automated feature calculation.</li> <li>[<a href="../records/10813969/files/raw_data.csv?download=1" target="_blank" rel="noopener">raw_data.csv</a>] CSV file with the values of the calculated properties of all cations.</li> </ul> </li> <li>Visualization <ul> <li>[<a href="../records/10813969/files/pca_qac_tool_QC.html?download=1" target="_blank" rel="noopener">pca_qac_tool_QC.html</a>] HTML page with Javascript to display PC1 and PC2 for the quantum chemical PCA model.</li> <li>[<a href="../records/10813969/files/pca_qac_tool_RDKit.html?download=1" target="_blank" rel="noopener">pca_qac_tool_RDKit.html</a>] HTML page with Javascript to display PC1 and PC2 for the PCA model based on non empirical RDKit descriptors.</li> </ul> </li> <li>Tools <ul> <li>[<a href="../records/10813969/files/pca_qac_tool.py?download=1" target="_blank" rel="noopener">pca_qac_tool.py</a>] Python script to generate the HTML output using Bokeh. Depends on the data_pca_qac.csv and the data_commercial.json file.</li> <li>[<a href="../records/10813969/files/PubChem_get_Vendor_information.py?download=1" target="_blank" rel="noopener">PubChem_get_Vendor_information.py</a>] Crawler that checks a list of PubChem CIDs for net-neutral compounds and whether they are commercially available.</li> <li>[<a href="../records/10813969/files/RDKit_Descriptor-2D.py?download=1" target="_blank" rel="noopener">RDKit_Descriptor-2D.py</a>] Python script to calculate all available 2D RDkit descriptors based on a list of SMILES strings.</li> <li>[<a href="../records/10813969/files/RDKit_Descriptor-3D.py?download=1" target="_blank" rel="noopener">RDKit_Descriptor-3D.py</a>] Python script to calculate the RDKit 3D descriptors based on the CREST and ORCA GeoOpt geometries.</li> </ul> </li> </ul>
Dataset accompanying Nölke et al. 2022. The choice of the white clover population alters overyielding of mixtures with perennial ryegrass and chicory and underlying processes. Scientific Reports
<p>This repository contains biomass and nitrogen yield data as well as data on diversity effects used by Nölke et al. in an article published in Scientific Reports (2022).</p> <p>Metadata are provided in the first excel worksheet ('explanation_overview'). For further details please see the original research article.</p>
What is epigenetics? and how our choices affect our genes
<p>The first video of the EPIBOOST Project, which integrates researchers Cecília Guerra and Maria José Loureiro from CIDTFF, and David Oliveira from DigiMedia, in their multidisciplinary team, is now available. As experts in Didactics and Educational Technology, researchers from CIDTFF and DigiMedia are responsible for producing scientific dissemination videos related to epigenetics, targeting society and to be disseminated on online platforms such as Educast (PT) and YouTube (for global accessibility). The first video explains "What is Epigenetics?" and how our choices affect our genes, with scientific review by Joana Luísa Pereira and Guilherme Jeremias, is already available on the project's page and on YouTube (<a href="https://youtu.be/1Tu1JA1_ICY">https://youtu.be/1Tu1JA1_ICY</a>).</p> <p>Date of the description: May, 2, 2024</p>
Model results: Model-based decision support for the choice of active spring frost protection measures in apple production
<p><strong>Background: </strong></p> <p>Apple producers are dealing with weather related risks affecting their production. One important risk, is the damage of buds or young fruits by late spring frosts. Fruit growers can protect their apple orchards against this risk in various ways. With a probabilistic model (available on Git Hub: <a href="https://github.com/ChristineSchmitz/Supporting_Information_DA_Frost_Protection">https://github.com/ChristineSchmitz/Supporting_Information_DA_Frost_Protection</a>, <a href="https://doi.org/10.5281/zenodo.11473204">https://doi.org/10.5281/zenodo.11473204</a>), we want to support the decision between several active frost protection measures. The measures considered in the model are: overhead irrigation, below-canopy irrigation, stationary wind machines, mobile wind machines, tractor-mounted gas heaters, portable gas heaters, candles and pellet heaters.</p> <p>As case studies, we parameterized the model for two German apple production regions (Rhineland and Lake Constance region).</p> <p><strong>Repository content:</strong></p> <p>This repository contains the simulation results of 100,000 Monte Carlo runs with the model.</p> <p>The results are provided as .RDS and .csv files. The .RDS files are suitable to be uses with the Code on Git Hub to follow the Post-Hoc analysis and figure plotting.</p>
Data from: Normalizing gas-chromatography–mass spectrometry data: method choice can alter biological inference
<p>Gas-Chromatography Mass Spectrometry data from European badger (<em>Meles meles</em>) sub-caudal gland secretion used in:</p> <p>Noonan, M.J., Tinnesand, H.V.,<sup> </sup>and Buesching, C.D. (2018). Normalizing gas-chromatography–mass spectrometry data: method choice can alter biological inference. BioEssays, 40(6): 0-0. DOI: 10.1002/bies.201700210.</p>
ENABLE.EU H2020 project dataset and questionnaire from a survey of households on energy use and energy choices
<p>The ZIP archive includes the anonymized micro-data (survey results) and the respective questionnaire from the survey of households in eleven countries, conducted as part of the H2020 project "<a href="http://www.enable-eu.com">Enabling the Energy Union through understanding the drivers of individual and collective energy choices in Europe</a>" (ENABLE.EU). </p> <p>The countries are: Bulgaria, France, Germany, Hungary, Italy, Norway, Poland, Serbia, Spain, Ukraine, and the United Kingdom.</p> <p>The dataset consists of 11 267 completed questionnaires (cases). </p> <p>The ZIP archive includes the following files:<br> • ENABLE.EU survey questionnaire for households in PDF format;<br> • ENABLE dataset from the survey of households in SAV format for IBM SPSS;<br> • ENABLE dataset from the survey of households in DTA format for STATA (the dataset is produced by simple export from SAV format and could contain some differences due to export limitations; If possible, we recommend to use the SAV-SPSS format);<br> • ENABLE dataset from the survey of households in XLSX format for Microsoft Excel, which includes also corresponding tables for the labels of questions and answers.</p> <p>For more information about the survey methodology and survey results please see: "D4.1 Final report on comparative sociological analysis of the household survey results" under the section <a href="http://www.enable-eu.com/downloads-and-deliverables/">Downloads / Deliverables</a> at the ENABLE.EU web-site. </p>
ENABLE.EU H2020 project dataset and questionnaire from a survey of business enterprises on energy use and energy choices
<p>The ZIP archive includes the anonymized micro-data (survey results) and the respective questionnaire from the online survey among the business enterprises in eleven countries, conducted as part of the H2020 project "<a href="http://www.enable-eu.com/">Enabling the Energy Union through understanding the drivers of individual and collective energy choices in Europe</a>" (ENABLE.EU).</p> <p>The countries are: Bulgaria, France, Germany, Hungary, Italy, Norway, Poland, Serbia, Spain, Ukraine, and the United Kingdom.</p> <p>The dataset consists of 215 completed and 505 uncompleted questionnaires (cases).</p> <p>The ZIP archive includes the following files:</p> <ul> <li>ENABLE.EU survey questionnaire for business enterprises in PDF format;</li> <li>ENABLE dataset from the survey of business enterprises in SAV format for IBM SPSS;</li> <li>ENABLE dataset from the survey of business enterprises in DTA format for STATA (the dataset is produced by simple export from SAV format and could contain some differences due to export limitations; If possible, we recommend to use the SAV-SPSS format);</li> <li>ENABLE dataset from the survey of business enterprises in XLSX format for Microsoft Excel, which includes also corresponding tables for the labels of questions and answers.</li> </ul> <p>For more information about the survey methodology and survey results please see: D3.1 Final report on comparative sociological analysis of the business enterprises' survey under the section <a href="http://www.enable-eu.com/downloads-and-deliverables/">Downloads / Deliverables</a> at the ENABLE.EU web-site. </p>
Temporal variation in spider trophic interactions is explained by the influence of weather on prey communities, web building and prey choice
<p>Materials and Methods</p> <p><em>Fieldwork</em><em> and sample processing</em></p> <p>Field collection and sample processing has been described previously by Cuff, Tercel, et al., (2022), but is briefly described in Supplementary Information 1. In short, money spiders (Araneae: Linyphiidae) and wolf spiders (Araneae: Lycosidae) were collected from occupied webs and the ground in barley fields between April and September 2018. Linyphiids occupying webs (n = 78) were prioritised for collection, but ground-active linyphiid and lycosid spiders were also collected. For each linyphiid taken from a web, the height of the web from the ground (mm) and its approximate dimensions were recorded, the latter calculated as approximate web area (mm<sup>2</sup>). To obtain data on local prey density, ground and crop stems were suction sampled using a ‘G-vac’ for approximately 30 seconds at each 4 m<sup>2</sup> quadrat from which spiders were collected. Extraction, amplification and sequencing of DNA, and bioinformatic analysis is described by Cuff, Tercel, et al. (2022) and Drake et al. (2022), and is also detailed in Supplementary Information 2. Amplification was carried out using two complementary PCR primer pairs: one targeting invertebrates generally, and one intended to exclude amplification of spider DNA to reduce the prevalence of ‘host’ reads in the data output (Cuff et al. 2023). Amplicons were sequenced via Illumina MiSeq V3 with 2x300 bp paired-end reads. The resultant sequencing read counts were converted to presence-absence data of each detected prey taxon in each individual spider. Given the prevalence of sequencing reads associated with each spider analysed and the impossibility of disentangling these from detections of intraspecific predation (i.e., cannibalism), all such reads were removed (Cuff et al. 2023), although intrageneric and intrafamilial predation were still detected.</p> <p> </p> <p><em>Weather data</em></p> <p>Weather data were taken from publicly available reports from the Cardiff Airport weather station (6.6 km from the study site) via “Wunderground” (Wunderground, 2020), to represent local weather conditions. This does not necessarily reflect smaller-scale effects (e.g., microclimate-scale; Bell, 2014; Holtzer et al., 1988), but the timescale of detection for dietary metabarcoding reduces the value of that resolution given that spiders may forage across multiple microclimates. We collated data from 1<sup>st</sup> January 2018 to 17<sup>th</sup> September 2018 (the last field collection). Weather data were also separately extracted for the week preceding each of the two 2017 collection dates (3<sup>rd</sup> to 9<sup>th</sup> August and 29<sup>th</sup> August to 4<sup>th</sup> September 2017). Specifically, daily average temperatures (°C), daily average dew point (°C), maximum daily wind speed (km h<sup>-1</sup>), daily sea level pressure (hPa) and day length (min; sunrise to sunset) were recorded. Precipitation data were downloaded via the UK Met Office Hadley Centre Observation Data (UK Met Office, 2020) as regional precipitation (mm) for South West England & Wales. Weather data were converted to mean values for seven days preceding the collection of spider samples to correspond with the longevity of DNA in the guts of spiders (Greenstone et al., 2014).</p> <p> </p> <p><em>Statistical Analysis</em></p> <p>All analyses were conducted in R v4.0.3 (R Core Team, 2020). To assess how weather affects spider trophic interactions over time, we analysed dietary changes across weather gradients using multivariate models. To identify whether this was likely to be driven by changes in prey abundance, we assessed the corresponding changes in the prey communities and then used null models to ascertain whether spiders were responding to prey abundance changes through prey choice. Given the dependence of linyphiid spiders on webs for foraging, we also compared web height and area over weather gradients to assess whether this may be a component of adaptive foraging. To assess the inter-annual consistency of prey choices in response to weather conditions, we also assessed whether prey preference data could be used to improve the predictive power of prey choice models. For this, we generated null models for 2017 data with prey abundance weighted by prey preferences estimated with the 2018 data. This allowed us to assess the consistency of prey choice under similar conditions, but also provides insight as to whether this framework can be used to predict predator responses to diverse prey communities under dynamic conditions. We detail the specific stages of this analytical framework in the below sections.</p> <p> </p> <p><em>Sampling completeness and diversity assessment</em></p> <p>To assess the diversity represented by the dietary analysis and the invertebrate community sampling, and the completeness of those datasets, coverage-based rarefaction and extrapolation were carried out, and Hill diversity calculated (Chao et al., 2014; Roswell, Dushoff, & Winfree, 2021). This was performed using the ‘iNEXT’ package with species represented by frequency-of-occurrence across samples (Chao et al., 2014; Hsieh et al., 2016; Figures S4 & S6).</p> <p> </p> <p><em>Relationships between weather, spider trophic interactions and prey community composition</em></p> <p>Prey species that occurred in only one spider individual were removed before further analyses to prevent outliers skewing the results. Spider trophic interactions were related to temporal and weather variables in multivariate generalized linear models (MGLMs) with a binomial error family (Wang, Naumann, Wright, & Warton, 2012). Trophic interactions were related to temporal variables and their pairwise interactions (including spider genus to account for any confounding effect), weather variables and their pairwise interactions, and weather variables and their interactions with spider genus and time (to account for any confounding effects) in three separate MGLMs. These variables were separated into different models (Temporal model, Weather interaction model and Confounding effects model) to improve model fit and reduce singularity. Invertebrate communities from suction sampling were related to temporal and weather variables in identically structured MGLMs (excluding the spider genus variable) with a Poisson error family.</p> <p>All MGLMs were fitted using the ‘manyglm’ function in the ‘mvabund’ package (Wang et al., 2012). ‘Temporal model’ independent variables were calendar day (<em>day</em>), mean day length in minutes for the preceding week (<em>day length</em>), spider genus (for dietary models only, to ascertain any effect of spider taxonomic differences on dietary differences over time and day lengths) and all two-way interactions between these variables. ‘Weather interaction model’ independent variables were mean temperature, precipitation, dewpoint, wind speed and pressure for the preceding week, and pairwise interactions between weather variables. ‘Confounding effects model’ independent variables were day (to investigate the interaction between time and weather), spider genus (for dietary models only, to ascertain any effect of spider taxonomic differences on dietary differences over time and day lengths), mean temperature, precipitation, dewpoint, wind speed and pressure for the preceding week, and two-way interactions of each weather variable with day and genus.</p> <p>Trophic interaction and community differences were visualised by non-metric multidimensional scaling (NMDS) using the ‘metaMDS’ function in the ‘vegan’ package (Oksanen et al., 2016) in two dimensions and 999 simulations, with Jaccard distance for spider diets and Bray-Curtis distance for invertebrate communities. For the dietary NMDS, outliers (n = 21; samples containing rare taxa) obscured variation on one axis and were thus removed to facilitate separation of samples and achieve minimum stress. For visualization of the effect of continuous variables against the NMDS, surf plots were created with scaled coloured contours using the ‘ordisurf’ function in the ‘ggplot’ package (Wickham, 2016).</p> <p> </p> <p><em>Relationships between web characteristics and weather variables</em></p> <p>Web area and height were compared against weather and temporal variables using a multivariate linear model (MLM) with the ‘manylm’ command in ‘mvabund’ (Wang et al., 2012). Log-transformed web area and height comprised the multivariate dependent variable, and day, spider genus, temperature, precipitation, dewpoint, wind, pressure and two-way interactions between each of these and day and genus comprised the independent variables.</p> <p> </p> <p><em>Variation in spider prey choice across weather conditions</em></p> <p>To separately represent spiders from different weather conditions in prey choice analyses, sample dates for every spider were clustered based on the mean weather conditions (temperature, precipitation, dewpoint, wind and pressure) of the week before collection (7 days, to align approximately with spider gut DNA half-life; Greenstone et al., 2014). Alongside data from 2018 (n = 24 collection dates), two sampling periods from 2017 were included in the clustering to ascertain similarity of weather conditions for additional inter-annual prey choice analyses described below. The clustering process is described in Supplementary Information 3. Five clusters were generated: High Pressure (HPR), Hot (HOT), Wet Low Dewpoint (WLD), Dry Windy (DWI), Wet Moderate Dewpoint (WMD), and 2017 (2017 sampling periods).</p> <p>Prey preferences of spiders in each of the weather clusters was analysed using network-based null models in the ‘econullnetr’ package (Vaughan et al., 2018) with the ‘generate_null_net’ command. Consumer nodes in this case represented spiders belonging to each of the weather clusters. Econullnetr generates null models based on prey abundance, represented here by suction sample data, to predict how consumers will forage if based on the abundance of resources alone. These null models are then compared against the observed interactions of consumers (i.e., interactions of spiders within each weather cluster with their prey) to ascertain the extent to which resource choice deviated from random (i.e., density dependence). The trophic network was visualised with the associated prey choice effect sizes using ‘igraph’ (Csardi & Nepusz, 2006) with a circular layout, and as a bipartite network using ‘ggnetwork’ (Briatte, 2021; Wickham, 2016). The normalised degree of each weather cluster node was generated using the ‘bipartite’ package (Dormann, Gruber, & Fruend, 2008) and compared against the normalised degree of the same node in the null network to determine whether spiders were more or less generalist than expected by random. Prior to the prey choice analysis, an hemipteran prey identified no further than order level through dietary analysis was removed due to the inability to pair it to any present prey taxa with certainty.</p> <p> </p> <p><em>Validating and predicting relationships between years</em></p> <p>To test how generalisable the results are and the extent to which weather drives prey preferences, we used a measure of prey preference (observed/expected values; observed interaction frequencies divided by interaction frequencies expected by null models) from the above prey choice analysis to assess whether we could more accurately predict observed trophic interactions under similar weather conditions for data from a linked study at the same location in 2017. These additional data represent a subset of the spider taxa analysed above (<em>Tenuiphantes tenuis</em> and <em>Erigone</em> spp.) collected using the same methods by the same researchers and in the same locality (Cuff, Drake, et al., 2021).</p> <p>The similarity in weather conditions between the 2017 study period and each of the five 2018 weather clusters was determined via NMDS of the weather data in two dimensions with Euclidean distance. Centroid coordinates for each 2018 weather cluster and the 2017 data were extracted and pairwise distances calculated between weather clusters:</p> <p> </p> <p>In order, the most proximate weather clusters to the 2017 weather data were HPR (mean Euclidean distance = 8.845), HOT (9.290), WMD (13.626), DWI (13.817) and WLD (18.682; Figure S3).</p> <p>To facilitate comparison between the two years, observed/expected values from the 2018 prey choice models were extracted separately for each of the weather clusters and scaled between 0.1 and 1. For this, 0.1 was used as a minimum since 0 would result in interactions being excluded altogether in the null models, and one as a maximum given the limits of econullnetr but also because this is a multiplier applied to the prey abundances, so greater values would skew prey abundances beyond realistic proportions. Scaling was achieved by the following equation:</p> <p> </p> <p>Missing values (e.g., prey that were absent in certain weather conditions) were represented as 1 to prevent transformation of their abundances in the null models; this treats prey for which data were absent naively, but could increase perceived preferences for them. The scaled values were used to weight the abundance of prey available to the spiders in the 2017 data using the weighting option in econullnetr, whereby values less than 1 proportionally reduce the probability of that taxon being predated in the null models. This effectively redistributes the 2017 relative prey abundance data according to the preference effect sizes generated for each of the 2018 weather clusters. If prey preferences are similar between the 2017 spiders and those from the weather cluster being used to weight the model, the composition of simulated diets should more closely resemble observed diets and fewer significant deviations from the null model should be found.</p> <p>Null models were generated as above (<em>Variation in spider prey choice across weather conditions</em>) but based on the prey availability and trophic interactions from 2017 samples. Three types of model were run: i) a conventional model based on observed prey abundances; ii) a model with prey abundances set to be equal across all prey taxa; and iii) observed prey abundances weighted by prey preferences determined for each of the weather clusters in the 2018 prey choice analysis. A separate model was run for each 2018 weather cluster with abundances weighted by the corresponding scaled observed/expected values. The unweighted conventional model was compared against weighted models to ascertain whether the prey preference weightings from 2018 improved the predictive power of the null models. To compare effect sizes between the unweighted and each other null model for each resource taxon, mean standardised effect size (SES) values were calculated from the paired ‘pre-harvest’ and ‘post-harvest’ data from each model, and paired <em>t</em>-tests were carried out with these between the unweighted and each weighted model. The SES values were plotted for each model and joined between taxa to visualise these paired differences using ‘ggplot’ (Wickham, 2016). Null model-predicted trophic interactions were generated via a modified ‘econullnetr’ function (generate_null_net_indiv) which produces outputs at the individual level to generate simulated diets for individual spiders to compare dietary composition between null model predictions and observed data. These models were run with 2300 simulations to represent 50 simulations per individual spider in the 2017 dataset (n = 46). Null diets were associated with sample IDs by aggregating the 50 simulations per sample and retaining a mean incidence of prey (i.e., mean occurrence across all 50 simulations). A visualisation of the per-sample differences in null model and observed data was generated via NMDS. Mean centroid coordinates for the observed 2017 data and the predicted diets of each model were extracted and the Euclidean distance between the observed data centroid and that of each model was calculated (as above for weather conditions).</p> <p> </p> <p><strong>Supplementary Information 1: Field collection and sample processing</strong></p> <p>Money spiders (Araneae: Linyphiidae) and wolf spiders (Araneae: Lycosidae) were visually located along transects in two adjacent barley fields at Burdons Farm, Wenvoe in South Wales (51°26'24.8"N, 3°16'17.9"W) and collected from occupied webs and the ground, between April and September 2018 (five visits per week of which spiders from 24 collection dates were used). Transects were randomly distributed across the entire field. Along these transects, 64 separate 4 m<sup>2</sup> quadrats, at least 10 m apart, were searched and all observed linyphiids and lycosids were collected. Spiders were placed in 100 % ethanol using an aspirator, regularly changing meshing to limit potential cross-contamination. Linyphiids occupying webs were prioritised for collection, but ground-active linyphiid spiders were also collected. For each spider taken from a web, the height of the web from the ground (mm) and its approximate dimensions were recorded, the latter calculated as approximate web area (mm<sup>2</sup>). Spiders were taken to Cardiff University, transferred to fresh ethanol, adults identified to species-level and juveniles to genus, and stored at -80 °C in 100 % ethanol until DNA extraction.</p> <p>To obtain data on local prey density, ground and crop stems were suction sampled using a ‘G-vac’ for approximately 30 seconds at each 4 m<sup>2</sup> quadrat (n = 64) from which spiders were collected. The collected material was emptied into a bag, any organisms immediately killed with ethyl-acetate and material frozen for storage before sorting into 70 % ethanol in the lab. All invertebrates were identified to family level to match the resolution of the least resolved of the metabarcoding-derived trophic interaction data, and due to difficulties associated with identification to finer taxonomic resolution for many taxa. Exceptions included springtails of the superfamily Sminthuroidea (Sminthuridae and Bourletiellidae were often indistinguishable following suction sampling and preservation due to the fine features necessary to distinguish them) which were left at super-family, mites (many of which were immature or in poor condition) which were identified to order level, and wasps of the superfamily Ichneumonoidea which were identified no further due to obscurity of wing venation due to damage.</p> <p> </p> <p><strong>Supplementary Information 2: Molecular analysis and bioinformatics</strong></p> <p><em>Extraction and high-throughput sequencing of spider gut DNA</em></p> <p>Given their prevalence in field collections, dietary analysis was carried out for the linyphiid genera <em>Erigone</em>, <em>Tenuiphantes</em>, <em>Bathyphantes</em> and <em>Microlinyphia </em>(Araneae: Linyphiidae), and the Lycosidae genus <em>Pardosa</em>. Spiders were transferred to and washed in fresh 100 % ethanol to reduce external contaminants prior to identification via morphological key (Roberts, 1993). Abdomens were removed from spiders and again transferred to and washed in fresh 100 % ethanol. DNA was extracted from the abdomens via Qiagen TissueLyser II and DNeasy Blood & Tissue Kit (Qiagen) as per the manufacturer protocol, but with an extended lysis time of 12 hours to account for the complex and branched gut system in spider abdomens (Krehenwinkel et al., 2017).</p> <p>For amplification of DNA, two primer pairs were used. BerenF-LuthienR (Cuff et al., 2021) amplified a broad range of invertebrates including spiders, and TelperionF-LaureR (Cuff et al., 2022), amplified a range of invertebrates but fewer spiders. Primers were labelled with unique 10 bp molecular identifier tags (MID-tags) so that each individual had a unique pairing of forward and reverse tags for identification of each spider post-sequencing. PCR reactions of 25 µl contained 12.5 µl Qiagen PCR Multiplex kit, 0.2 µmol (2.5 µl of 2 µM) of each primer and 5 µl template DNA. Reactions were carried out in the same thermocycler, optimised via temperature gradient, with an initial 15 minutes at 95 °C, 35 cycles of 95 °C for 30 seconds, the primer-specific annealing temperature for 90 seconds and 72 °C for 90 seconds, respectively, followed by a final extension at 72 °C for 10 minutes. BerenF-LuthienR and TelperionF-LaureR used annealing temperatures of 52 °C and 42 °C, respectively.</p> <p>Within each PCR 96-well plate, 12 negative controls (extraction and PCR), 2 blank controls and 2 positive controls were included (i.e. 80 samples per plate), based on Taberlet <em>et al. </em>(2018). Positive controls were mixtures of invertebrate DNA comprised of non-native Asiatic species in four different proportions and blanks were empty wells within each plate to identify tag-jumping into unused MID-tag combinations. PCR negative controls were DNase-free water treated identically to DNA samples. A negative control was present for each MID-tag to identify any contamination of primers. All PCR products were visualised in a 2 % agarose gel with SYBRSafe (Thermo Fisher Scientific, Paisley, UK) and placed in categories based on their relative brightness. The concentration of these brightness categories was quantified via Qubit dsDNA High-sensitivity Assay Kits (Thermo Fisher Scientific, Waltham, MA, USA) with at least three representatives of each category per plate. The PCR products were then proportionally pooled according to these concentrations. Each pool was cleaned via SPRIselect beads (Beckman Coulter, Brea, USA), with a left-side size selection using a 1:1 ratio (retaining ~300-1000 bp fragments). The concentration of the pooled DNA was then determined via Qubit dsDNA High-sensitivity Assay Kits and pooled together into one library per primer pair. Library preparation for Illumina sequencing was carried out on the cleaned libraries via NEXTflex Rapid DNA-Seq Kit (Bioo Scientific, Austin, USA) and samples were sequenced on an Illumina MiSeq via a V3 chip with 300-bp paired-end reads (expected capacity ≤25,000,000 reads).</p> <p><em>Bioinformatic analysis</em></p> <p>Bioinformatic analysis followed Drake et al., (2022). The Illumina run generated 11,165,405 and 10,959,010 reads for BerenF-LuthienR and TelperionF-LaureR, respectively, which were quality-checked and paired via FastP (Chen et al., 2018) to retain only sequences of at least 200 bp with a quality threshold of 33, resulting in 10,561,874 and 9,355,112 paired reads. The paired reads were demultiplexed and assigned to their respective spider sample according to their MID-tags via the “trim.seqs” command in Mothur v1.39.5 (Schloss et al., 2009), leaving 7,854,610 and 7,437,929 reads with exact matches to the primer and MID-tags.</p> <p>Replicates were removed, and denoising and clustering to zero-radius operational taxonomic units (ZOTUs; clustered without % identity to avoid multiple species represented within a single operational taxonomic unit (OTU)) completed via Unoise3 in Usearch11 (Edgar, 2010). The resultant sequences were assigned a taxonomic identity from GenBank via BLASTn v2.7.1 (Camacho et al., 2009) using a 97 % identity threshold (Alberdi et al., 2017). The BLAST output was analysed in MEGAN v6.15.2 (Huson et al., 2016). Where the top BLAST hit, determined by lowest e-value, was resolved at a higher taxonomic level than species-level, the results were checked; where possibly erroneous entries were preventing species-level assignment (e.g., poorly resolved identifications on GenBank), finer resolution was assigned based on the next-closest match. Where ZOTUs were assigned the same taxon, these were aggregated.</p> <p>Data clean-up used the optimal minimum sequence copy thresholds identified by Drake et al. (2022). The maximum value for a ZOTU present in blank or negative controls was identified and subtracted from all read counts for that ZOTU to remove background contaminants. Simultaneously, known lab contaminants (e.g., German cockroach <em>Blattella germanica</em>), artefacts and errors of the sequencing process, unexpected reads in positive controls and positive control taxon reads in dietary samples were identified. These were calculated as a percentage of their respective sample’s read count and any read counts lower than the highest of these percentages for their respective sample were removed to eliminate additional instances of contamination. These thresholds were defined as 0.38 % and 0.39 % for BerenF-LuthienR and TelperionF-LaureR, respectively. The data from the two libraries (i.e., from each primer pair) were then aggregated together by sample and aggregated again by taxon. Non-target taxa (e.g., fungi) and instances in which predator DNA was amplified (i.e., ZOTUs with high read counts matching the individual’s morphological identity) were removed. All remaining read counts were converted to presence-absence.</p> <p> </p> <p><strong>Supplementary Information 3: Cluster analysis</strong></p> <p>Prior to clustering, weather variables were scaled by subtracting the mean and dividing by the standard deviation. A Euclidean distance matrix was calculated using the ‘dist’ function, and this scaled distance matrix was hierarchically clustered using the ‘hclust’ function. Optimal clustering solutions were determined by comparison of Dunn’s index between methods and <em>k</em> values; this was calculated using the ‘dunn’ function in the “clValid” package (Brock et al., 2008) for each cluster <em>k</em> value above five until the Dunn index decreased. The <em>k</em> value after which Dunn’s index decreased was deemed the optimal solution for each clustering method. Clustering methods based on ‘average’, ‘complete’, ‘single’, ‘median’, ‘centroid’ and ‘mcquitty’ linkages were compared, and the ‘complete’ method selected for subsequent analysis as it resulted in the smallest number of clusters (6; thus, the most efficient simplification of the data; Figure S1). Different clustering methods altered the composition of some clusters, but most sampling dates showed consistent clustering between methods.</p> <p>A heatmap dendrogram was produced using the ‘heatmap.2’ function in the ‘gplots’ package (Warnes et al., 2020), with cluster colours assigned with the ‘Accent’ palette of ‘RColorBrewer’ (Neuwirth, 2014) and relative weather value colour scaling generated using the ‘viridis’ package (Garnier 2018; Figure S2). Weather clusters were named according to unique characteristics relative to the other clusters. These names comprise: High Pressure (HPR; days 142, 253, 256, 250, 173), Hot (HOT; days 162, 204, 205, 208, 201, 187, 198, 197, 183, 184, 194, 190 and 191), Wet Low Dewpoint (WLD; day 121), Dry Windy (DWI; days 131, 169 and 170), Wet Moderate Dewpoint (WMD; days 149 and 152), and 2017 (pre- and post-harvest 2017 sampling periods).</p> <p> </p> <p> </p> <p><strong>References</strong></p> <p>Alberdi, A., Aizpurua, O., Gilbert, M. T. P., & Bohmann, K. (2017). Scrutinizing key steps for reliable metabarcoding of environmental samples. <em>Methods in Ecology and Evolution</em>, <em>9</em>(1), 1–14. https://doi.org/10.1111/2041-210X.12849</p> <p>Brock, G., Pihur, V., Datta, S., & Datta, S. (2008). clValid: an R package for cluster validation. <em>Journal of Statistical Software</em>, <em>25</em>(4), 1–22.</p> <p>Camacho, C., Coulouris, G., Avagyan, V., Ma, N., Papadopoulos, J., Bealer, K., & Madden, T. L. (2009). BLAST+: architecture and applications. <em>BMC Bioinformatics</em>, <em>10</em>, 1–9. https://doi.org/10.1186/1471-2105-10-421</p> <p>Chen, S., Zhou, Y., Chen, Y., & Gu, J. (2018). Fastp: An ultra-fast all-in-one FASTQ preprocessor. <em>Bioinformatics</em>, <em>34</em>(17), i884–i890. https://doi.org/10.1093/bioinformatics/bty560</p> <p>Cuff, J. P., Drake, L. E., Tercel, M. P. T. G., Stockdale, J. E., Orozco-terWengel, P., Bell, J. R., Vaughan, I. P., Müller, C. T., & Symondson, W. O. C. (2021). Money spider dietary choice in pre- and post-harvest cereal crops using metabarcoding. <em>Ecological Entomology</em>, <em>46</em>(2), 249–261.</p> <p>Cuff, J. P., Tercel, M. P. T. G., Drake, L. E., Vaughan, I. P., Bell, J. R., Orozco-terWengel, P., Müller, C. T., & Symondson, W. O. C. (2022). Density-independent prey choice, taxonomy, life history and web characteristics determine the diet and biocontrol potential of spiders (Linyphiidae and Lycosidae) in cereal crops. <em>Environmental DNA</em>, <em>4</em>(3), 549–564.</p> <p>Drake, L. E., Cuff, J. P., Young, R. E., Marchbank, A., Chadwick, E. A., & Symondson, W. O. C. (2022). An assessment of minimum sequence copy thresholds for identifying and reducing the prevalence of artefacts in dietary metabarcoding data. <em>Methods in Ecology and Evolution</em>, <em>13</em>(3), 694–710.</p> <p>Edgar, R. C. (2010). Search and clustering orders of magnitude faster than BLAST. <em>Bioinformatics</em>, <em>26</em>(19), 2460–2461. https://doi.org/10.1093/bioinformatics/btq461</p> <p>Garnier, S. (2018). <em>viridis: default color maps from ‘matplotlib’</em> (0.5.1). https://cran.r-project.org/package=viridis</p> <p>Huson, D. H., Beier, S., Flade, I., Górska, A., El-Hadidi, M., Mitra, S., Ruscheweyh, H. J., & Tappu, R. (2016). MEGAN Community Edition - interactive exploration and analysis of large-scale microbiome sequencing data. <em>PLoS Computational Biology</em>, <em>12</em>(6), 1–12. https://doi.org/10.1371/journal.pcbi.1004957</p> <p>Krehenwinkel, H., Kennedy, S., Pekár, S., & Gillespie, R. G. (2017). A cost-efficient and simple protocol to enrich prey DNA from extractions of predatory arthropods for large-scale gut content analysis by Illumina sequencing. <em>Methods in Ecology and Evolution</em>, <em>8</em>, 126–134. https://doi.org/10.1111/2041-210X.12647</p> <p>Neuwirth, E. (2014). <em>RColorBrewer: ColorBrewer palettes</em> (1.1-2). https://cran.r-project.org/package=RColorBrewer</p> <p>Roberts, M. J. (1993). <em>The Spiders of Great Britain and Ireland (Compact Edition)</em> (3rd ed.). Harley Books.</p> <p>Schloss, P. D., Westcott, S. L., Ryabin, T., Hall, J. R., Hartmann, M., Hollister, E. B., Lesniewski, R. A., Oakley, B. B., Parks, D. H., Robinson, C. J., Sahl, J. W., Stres, B., Thallinger, G. G., Van Horn, D. J., & Weber, C. F. (2009). Introducing mothur: open-source, platform-independent, community-supported software for describing and comparing microbial communities. <em>Applied and Environmental Microbiology</em>, <em>75</em>(23), 7537–7541. https://doi.org/10.1128/AEM.01541-09</p> <p>Taberlet, P., Bonin, A., Zinger, L., & Coissac, E. (2018). <em>Environmental DNA</em>. Oxford University Press.</p> <p>Warnes, G. R., Bolker, B., Bonebakker, L., Gentleman, R., Huber, W., Liaw, A., Lumley, T., Maechler, M., Magnusson, A., Moeller, S., Schwartz, M., & Venables, B. (2020). <em>gplots: Various R programming tools for plotting data</em> (R package version 3.1.0). https://cran.r-project.org/package=gplots</p>
Raw data: Specialized metabolites accumulation pattern in buckwheat is strongly influenced by accession choice and co-existing weeds
<p>Screening suitable allelopathic crops and crop genotypes that are competitive with weeds can be a sustainable weed control strategy to reduce the massive use of herbicides. In this study, three accessions of common buckwheat <em>Fagopyrum esculentum</em> Moench. (Gema, Kora, and Eva) and one of Tartary buckwheat <em>Fagopyrum tataricum</em> Gaertn. (PI481671) were screened against the germination and growth of the herbicide-resistant weeds <em>Lolium rigidum </em>Gaud. and <em>Portulaca oleracea</em> L. The chemical profile of the four buckwheat accessions was characterised in their shoots, roots, and root exudates in order to know more about their ability to sustainably manage weeds and the relation of this ability with the polyphenol accumulation and exudation from buckwheat plants. Our results show that different buckwheat genotypes may have different capacities to produce and exude several types of specialized metabolites, which lead to a wide range of allelopathic and defence functions in the agroecosystem to sustainably manage the growing weeds in their vicinity. The ability of the different buckwheat accessions to suppress weeds was accession-dependent without differences between species, as the common (Eva, Gema, and Kora) and Tartary (PI481671) accessions did not show any species-dependent pattern in their ability to control the germination and growth of the target weeds. Finally, Gema appeared to be the most promising accession to be evaluated in organic farming due to its capacity to sustainably control target weeds while stimulating the root growth of buckwheat plants.</p>
Block-group level mode choice parameters for New York City and New York State
<p>We provide two datasets of census block group-level mode choice parameters for New York City and New York State. The parameters are estimated by GLAM logit model using Replica's synthetic population datasets (For details of the GLAM logit model, please refer to <a href="https://github.com/BUILTNYU/GLAM-Logit">BUILTNYU/GLAM-Logit (github.com)</a>). Each row contains a set of mode choice parameters for each block-group OD pair and one of the four population segments (low-income, not low-income, students, and senior population). Six trip modes are considered: private auto, public transit (such as buses, light rail, and subways), on demand auto (taxi or TNC services such as Uber or Lyft), biking (including e-bike), walking, and carpool. Parameters of twelve mode attributes are estimated, including, auto travel time, transit in-vehicle time, transit access time, transit egress time, number of transit transfers, non-vehicle travel time, trip cost, and five alternative specific constants (setting carpool as the reference level).</p> <p>In New York City, the average value of time (VOT) of low-income population is 21.67$/hour, the average VOT of not low-income population is 28.05$/hour, the average VOT of student population is 10.96$/hour, and the average VOT of senior population is 10.93$/hour. In New York State, the average value of time (VOT) of low-income population is 9.63$/hour, the average VOT of not low-income population is 13.95$/hour, the average VOT of student population is 7.40$/hour, and the average VOT of senior population is 6.26$/hour. </p> <p>The empirical distribution of agent-level parameters is neither Gumbel nor Gaussian, which reveals a regional divergence of the value of time and mode preference, indicating potential inequity issues in the transportation system. This is infeasible for conventional discrete choice models (DCMs) to capture. </p>
Benne: A Modular Data Stream Clustering Algorithm with Flexible Design Choices
<p>All of the source dataset with preprocessed format [id features class] that have been used for evaluation in the paper.</p>
Neural Evidence of the Strategic Choice Between Working Memory and Episodic Memory in Prospective Remembering.
Open the record for dataset details and reuse information.
Valuation of peers' safe choices is associated with substance-naivete in adolescents'
Open the record for dataset details and reuse information.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.