Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
585
datasets available to search
ShareScore release 0.9.0
Dataset results
585 results for “comfort”
Geochemical data from Little Comfort and Keewahtin Lakes, Minnesota 2023-2024.
Depth profiles of water column chemical and physical properties were assessed with seasonal-scale frequency from Little Comfort from September 2023 to June 2024 and from Keewahtin Lake in September 2023. The data were collected to assess mixing status, major geochemical constituents within the lake, and mineral precipitation reactions. Several parameters were routinely measured with deployable probes at meter or sub-meter resolution at the deepest location in each lake. Water samples were also collected for laboratory analysis.
SGH Home Comfort
<p>Dataset gathered during the Smart Green Homes (SGH) project. The project aimed to develop integrated product and technology solutions for households, raising standards of comfort, safety, and user satisfaction to a new level and, at the same time, respond to the problems of sustainability of the planet, increasing energy efficiency and reducing the emission of gaseous pollutants and the consumption of water. One of the explored scenarios collected environmental data from volunteers' homes and the level of comfort as perceived by the volunteers. The resulting dataset was used during the project but contains more useful information than what was possible to explore at the time. We now share with the community a dataset that can be used for heating appliance optimization, presence detection, and environmental prediction (temperature relative humidity, and atmospheric pressure).</p>
Icons of the tipping points in the Earth System from the H2020 COMFORT project (820989)
<p>Triple threat processes and/or other forcings can lead to changes in the ocean happening fast and abruptly. These changes, referred to as “tipping points”, are critical thresholds in a marine system that, when exceeded, can lead to a significant change in the state of the system, which often can be irreversible. This product has been prepared with the financial support of Norges forskningsråd (Research Council of Norway) (309382) and the European Union’s Horizon 2020 research and innovation programme under grant agreement No 820989 (project COMFORT, Our common future ocean in the Earth system – quantifying coupled cycles of carbon, oxygen, and nutrients for determining and achieving safe operating spaces with respect to tipping points). The work reflects only the author’s/authors’ view; the European Commission and their executive agency are not responsible for any use that may be made of the information the work contains.</p>
Thermal Comfort and Perception of Different Materials for Tabletops: Datasets, Processing Code, and Supplementary Tables.
<p>In this data repository, data related to the study <em>Thermal Comfort and Perception of Different Materials for Tabletops </em> is deposited, and includes datasets, processing code, and supplementary tables.</p> <p> </p>
Seasonal analysis comparison of three air-cooling systems in terms of thermal comfort, air quality and energy consumption for school buildings in Mediterranean climates
<p>Efficient air-cooling systems for hot climatic conditions, such as Southern Europe, are required in the context of nearly Zero Energy Buildings, nZEB. Innovative air-cooling systems such as regenerative indirect evaporative coolers, RIEC and desiccant regenerative indirect evaporative coolers, DRIEC, can be considered an interesting alternative to direct expansion air-cooling systems, DX. The main aim of the present work was to evaluate the seasonal performance of three air-cooling systems in terms of air quality, thermal comfort and energy consumption in a standard classroom. Several annual energy simulations were carried out to evaluate these indexes for four different climate zones in the Mediterranean area. The simulations were carried out with empirically validated models. The results showed that DRIEC and DX improved by 29.8% and 14.6% over RIEC regarding thermal comfort, for the warmest climatic conditions, Lampedusa and Seville. However, DX showed an energy consumption three and four times higher than DRIEC for these climatic conditions, respectively. RIEC provided the highest percentage of hours with favorable indoor air quality for all climate zones, between 46.3% and 67.5%. Therefore, the air-cooling systems DRIEC and RIEC have a significant potential to reduce energy consumption, achieving the user’s thermal comfort and improving indoor air quality.</p>
OccuTherm: Occupant Thermal Comfort Inference using Body Shape Information
<p><strong>OccuTherm: Occupant Thermal Comfort Inference using Body Shape Information</strong></p> <p>This repository contains the official data from a USDOE-funded project at Carnegie Mellon University and Bosch Research Pittsburgh. </p> <p>The primary goal of the project was to investigate the relationship between indoor commercial building occupant thermal comfort and various biometric and environmental predictors. We performed 77 individual comfort experiments, approved by our Institutional Review Board (IRB) and in satisfaction of participant consent guidelines. Our goal was to generate a dataset than enables comprehensive study of human thermal comfort preferences, in a commercial building environment, across a wide range of indoor environmental conditions. The data is comprised of the following feature groups: depth camera frames, biometrics sensor data, body shape information, subjective comfort data from the mobile device application, environmental sensor data from the commercial building HVAC system, and outdoor weather station data.</p> <p>This is the official dataset release for the following conference paper:</p> <blockquote> <p>Jonathan Francis*, Matias Quintana*, Nadine von Frankenberg, Sirajum Munir, and Mario Bergés. 2019. OccuTherm: Occupant Thermal Comfort Inference using Body Shape Information. In BuildSys '19: ACM International Conference on Systems for Energy-Efficient Buildings, Cities, and Transportation, November 13–14, 2019, New York, NY. ACM, New York, NY, USA, 10 pages.</p> </blockquote> <p>To use this dataset, first download <strong>all</strong> the files.</p> <p>Next, issue the following commands on, e.g., Linux terminal:</p> <pre><code class="language-bash">>$ cd /path/to/dataset/files >$ cat occutherm_dataset_v0-0-0.tar.gza* > archive.tar.gz >$ tar -xvzf archive.tar.gz</code></pre> <p>Modeling and mobile application code are available in our project repository: <a href="https://github.com/jonfranc/occutherm">https://github.com/jonfranc/occutherm</a></p> <p>If you find the repository or the dataset useful, please cite our paper:</p> <pre><code>@inproceedings{francis_buildsys2019, author = {Francis, Jonathan and Quintana, Matias and von Frankenberg, Nadine and Munir, Sirajum and Berges, Mario}, title = {OccuTherm: Occupant Thermal Comfort Inference using Body Shape Information}, booktitle = {Proceedings of the 6th International Conference on Systems for Energy-Efficient Buildings, Cities, and Transportation}, series = {BuildSys '19}, year = {2019}, isbn = {978-1-4503-7005-9/19/11}, location = {New York, NY}, numpages = {10}, acmid = {3360858}, publisher = {ACM}, address = {New York, NY, USA}, keywords = {Thermal Comfort, Human Studies, Machine Learning}, }</code></pre> <p> </p>
Dataset article "Demand-Response Control of Electric Storage Water Heaters Based on Dynamic Electricity Pricing and Comfort Optimization"
<p>"README-SupplementaryMaterial.txt" explains the information gathered in each csv files, and including the DHW consumption profiles generated, the hourly electricity pricing for 2022 (Spain), and the experimental data utilized for the validation of the model. </p>
adaptive comfort model results dominican republic
<p>The data represents the temperature results of a social interest house in the Dominican Republic evaluated in 5 different climates using Design Builder</p>
ASHRAE global database of thermal comfort field measurements
Open the record for dataset details and reuse information.
Modified "test_urban" dataset for thermal comfort in PALM
<p>The test configuration used in the manuscript "Calculating human thermal comfort and thermal stress in the<br> PALM model system 6.0" submitted to GMD along with the results and source code.</p>
Comfort and wearability of orthodontic mouthguards during contact sports in adolescent patients undergoing fixed appliance orthodontic treatment: a randomised clincal trial
<p>Dataset for all analyses in the paper</p>
Postural Optimization for a Safe and Comfortable Human-Robot Interaction: Experiment Dataset
<p>In human-robot collaboration the robot's behavior impacts the worker's safety, comfort, and his acceptance of the robotic system. In this paper we address the problem of how to improve the worker's posture during human-robot collaboration. Using postural assessment techniques, and a personalized human kinematic model, we optimize the model body posture to fulfill a task while avoiding uncomfortable or unsafe postures. We then derive a robotic behavior that leads the worker towards that improved posture. We validate our approach in an experiment involving a joint task with 39 human subjects and a Baxter torso-humanoid robot.</p> <p>This repository contains the anonymized recorded data of our experiment. For all the subjects, we have included their recorded posture, using a motion capture system, and a video taken from a camera located on the robot head. Each data is divided by subjects and by tested conditions. In a separate file, we also include the result of the survey answered alongside the experiment.</p>
Data for "Measuring mean radiant temperature for indoor comfort assessment using low-resolution optical sensors"
<p>Data for "Measuring mean radiant temperature for indoor comfort assessment using low-resolution optical sensors".</p>
Supplemental idf files used for paper "Refurbishmet Methodology to Attain Thermally Comfortable near-Zero Energy Buildings Using Customizable Solutions"
<p>These are the idf files used to study different technology alternatives offered by the Reco2st project on an idealized dormitory room located in London, UK. The files are presented "as is" and were done for EnergyPlus v8.9. Includes files that might have not made it to the final paper.</p> <p>Geometry: One zone room with one external window.<br> Materials: External construction is cavity wall, with bricks on both sides, gypsum plaster on internal side<br> Internal walls brick single layer with gypsum plaster.<br> Ceiling and floor reinforced concrete. Plaster finish on ceiling, nylon carpet on floor<br> Double glazed window. Five panes available: one large central fixed, two small clerestory opening, and two large side opening.<br> For simulation purposes a single equivalent area of all openings modelled.<br> Material data sources: gov.scot, puravent.co.uk, nature.com. SHGC from LBL.</p> <p>This is part of work done for ReCO2ST - Residential Retrofit assessment platform and demonstrations for near zero energy and CO2 emissions with optimum cost, health, comfort and environmental quality. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 768576.</p>
Data related to Mapping user-related comfort conditions to identify urban planning issues for improved quality of places in cities: The case of Ljubljana, Slovenia
<p>The data consists of parameters including air temperature, noise levels, humidity, and air quality (PM 2.5), measured using a portable ICT device while cycling through the city of Ljubljana between August 1 and August 30, 2022. The data is available as raw CSV files, with each measurement session stored in a separate file. An additional QGIS Project file (qgz) is included, along with maps (in jpg format in ppt) that visually represent the results presented in the article.</p>
Eindhoven - Human comfort: Physiological Equivalent Temperature
<p>Results of the measurements and evaluation of human comfort near NBS as evaluated by Physiological Equivalent Temperature in Eindhoven.</p>
Let's talk scalability: The current status of multi-domain thermal comfort models as support tools for the design of office buildings (Dataset v1.2.1)
<p><strong>THE PUBLICATION</strong></p> <p>The data set provided is complementary to the thermal comfort review by Mamulova et al., 2023, titled "<strong>Let's talk scalability: The current status of multi-domain thermal comfort models as support tools for the design of office buildings</strong>": <a href="https://doi.org/10.1016/j.buildenv.2023.110502">Link to full publication</a>. The scoping review examines 77 multi-domain thermal comfort studies and initiates a discussion on model scalability; a model parameter which facilitates the understanding and prediction of thermal comfort conditions in real-world practice.</p> <p><strong>THE DATA</strong></p> <p>This database contains 27 scalability parameters per study which are used to analyse current research practices. For the results, please consult the review publication, as this database only contains raw data. For clarity, a legend of the scalability parameters is provided below.</p> <p><strong>*** PLEASE NOTE ***</strong></p> <p><strong>This data set may be utilised, altered and/or expanded. However, you are kindly asked to cite this data set, the review publication (if applicable) and contact the corresponding author at eugenemamulova@gmail.com. </strong></p> <table> <tbody> <tr> <td><em>Citation</em></td> <td><em>Citation number used in Mamulova et al.,"Multi-Domain Thermal Comfort Models for Office Buildings: Are Current Practices Scalable?", (2023)</em></td> <td><em>E.g. 1</em></td> </tr> <tr> <td><em>First Author</em></td> <td><em>Surname of the main author, for reference purposes only.</em></td> <td><em>E.g. Al-Atrash</em></td> </tr> <tr> <td><em>Publication</em></td> <td><em>Publication year</em></td> <td><em>E.g. 2020</em></td> </tr> <tr> <td><em>Dependent A</em></td> <td><em>List of variables used to measure thermal perception</em></td> <td><em>E.g. Neutral temperature/ Thermal sensation</em></td> </tr> <tr> <td><em>Dependent B</em></td> <td><em>Scale used to measure each dependent variable</em></td> <td> </td> </tr> <tr> <td><em>Interaction A</em></td> <td><em>List of interaction effect(s) included in the explanatory/predictive model(s) </em></td> <td><em>E.g. Thermal and age/ Thermal and acoustical and personality</em></td> </tr> <tr> <td><em>Interaction B</em></td> <td><em>Is/are the effect(s) statistically significant?</em></td> <td><em>E.g. yes/ no/ (unknown)</em></td> </tr> <tr> <td><em>Crossed A</em></td> <td><em>List of crossed effect(s) included in the explanatory/predictive model(s) </em></td> <td><em>E.g. Acoustical/ Personality/ Age</em></td> </tr> <tr> <td><em>Crossed B</em></td> <td> </td> <td><em>*Note: Temperature is a main effect and is not included in the list</em></td> </tr> <tr> <td><em>Explanatory A</em></td> <td><em>Type of explanatory model</em></td> <td><em>E.g. Observation/ Statistical/ N/A</em></td> </tr> <tr> <td><em>Explanatory B</em></td> <td><em>Description of the explanatory model</em></td> <td><em>E.g. Asymptotic General Symmetry Test to check significance of difference in thermal perception between window conditions</em></td> </tr> <tr> <td><em>Predictive A</em></td> <td><em>Does the article include a predictive model?</em></td> <td><em>E.g. yes/ no</em></td> </tr> <tr> <td><em>Predictive B</em></td> <td><em>Type of predictive algorithm</em></td> <td><em>E.g. Logistic regression/ N/A</em></td> </tr> <tr> <td><em>Predictive C</em></td> <td><em>Description or formulation of the predictive model</em></td> <td><em>E.g. Probability of feeling too hot and probability of feeling too cold in relation to sound pressure level</em></td> </tr> <tr> <td><em>Performance</em></td> <td><em>Reported predictive performance</em></td> <td><em>E.g. Accuracy = 80%/ F-score = 0.8/ N/A</em></td> </tr> <tr> <td><em>Location</em></td> <td><em>City in which the measurements take place</em></td> <td><em>E.g. Paris</em></td> </tr> <tr> <td><em>Period</em></td> <td><em>Period over which the measurements take place</em></td> <td><em>E.g. Jan-Feb 2020</em></td> </tr> <tr> <td><em>Start time</em></td> <td><em>Time of day at which the measurements begin</em></td> <td><em>*Note: Time of day is not reported for most field studies. For this reason, time of day is only recorded for laboratory experiements.</em></td> </tr> <tr> <td><em>Study type</em></td> <td><em>Type of building and whether the experimental conditions are controlled by the experiment leader</em></td> <td><em>E.g. Field (controlled)/ Field (uncontrolled)/ Lab (controlled)/ Lab (uncontrolled)</em></td> </tr> <tr> <td><em>Building layout</em></td> <td><em>Building layout</em></td> <td><em>E.g. Laboratory office (LO)/ Laboratory neutral (LN)/ Field office (FO)</em></td> </tr> <tr> <td><em>Exposure</em></td> <td><em>Exposure of the participant, in minutes, to the experimental conditions, excluding preparation time</em></td> <td><em>*Note: Exposure is not reported for most field studies. For this reason, exposure is only recorded for laboratory experiements and is assumed to be longer than 60 minutes.</em></td> </tr> <tr> <td><em>Number of buildings/chambers</em></td> <td><em>Number of different locations used for conducting measurements</em></td> <td><em>E.g. 1</em></td> </tr> <tr> <td><em>Number of participants</em></td> <td><em>Number of individuals who take part in each experiment</em></td> <td><em>*Note: Outliers who are subsequently excluded from the modelling phase are not included.</em></td> </tr> <tr> <td><em>Survey type</em></td> <td><em>Description of the type of survey used for subjective measurements</em></td> <td><em>E.g. Longitudinal questionnaire/ Transverse questionnaire/ N/A</em></td> </tr> <tr> <td><em>Survey content</em></td> <td><em>Are the contents of the survey provided in the article?</em></td> <td><em>E.g. Available/ unavailable</em></td> </tr> <tr> <td><em>Survey source</em></td> <td><em>Is/are the source(s) of the survey items mentioned in the article?</em></td> <td><em>E.g. Available/ unavailable</em></td> </tr> <tr> <td><em>Survey reliability</em></td> <td><em>Is the reliability of the survey items reported in the article?</em></td> <td><em>E.g. Available/ unavailable</em></td> </tr> <tr> <td><em>Survey duration</em></td> <td><em>Is the survey duration reported in the article?</em></td> <td><em>E.g. Available/ unavailable</em></td> </tr> <tr> <td><em>Context A</em></td> <td><em>Overview of the contextual information provided by the authors</em></td> <td><em>E.g. Room layout/ Room dimennsions</em></td> </tr> <tr> <td><em>Context B</em></td> <td><em>Qualitative/quantitative contextual information</em></td> <td><em>E.g. Figure containing room layout/ 3m x 3m x 5m</em></td> </tr> <tr> <td><em>Contextual variables A</em></td> <td><em>List of contextual variable(s) measured by the researchers (see Fig. A.)</em></td> <td><em>*Note: List of all variables mentioned in the article, including those that are not included in the explanatory/predictive models.</em></td> </tr> <tr> <td><em>Contextual variables B</em></td> <td><em>Range of values included in the experiment and their respective units.</em></td> <td><em>E.g. figure</em></td> </tr> <tr> <td><em>Social variables A</em></td> <td><em>List of social variable(s) measured by the researchers (see Fig. A.)</em></td> <td><em>*Note: List of all variables mentioned in the article, including those that are not included in the explanatory/predictive models.</em></td> </tr> <tr> <td><em>Social variables B</em></td> <td><em>Range of values included in the experiment and their respective units.</em></td> <td><em>E.g. [1,2,3,4,5]</em></td> </tr> <tr> <td><em>Personal variables A</em></td> <td><em>List of contextual variable(s) measured by the researchers (see Fig. A.)</em></td> <td><em>*Note: List of all variables mentioned in the article, including those that are not included in the explanatory/predictive models.</em></td> </tr> <tr> <td><em>Personal variables B</em></td> <td><em>Range of values included in the experiment and their respective units.</em></td> <td><em>E.g. [red, blue]</em></td> </tr> <tr> <td><em>Physical variables A</em></td> <td><em>List of physical variable(s) measured by the researchers (see Fig. A.)</em></td> <td><em>*Note: List of all variables mentioned in the article, including those that are not included in the explanatory/predictive models.</em></td> </tr> <tr> <td><em>Physical variables B</em></td> <td><em>Range of values included in the experiment and their respective units</em></td> <td><em>E.g. dB(A)</em></td> </tr> <tr> <td><em>Full-factorial</em></td> <td><em>Is/are the experiment(s) full-factorial?</em></td> <td><em>*Note: Uncontrolled field experiments are automatically labelled as fractional factorial.</em></td> </tr> <tr> <td><em>(Participant) Control</em></td> <td><em>Do participants have control over one or more experimental conditions?</em></td> <td><em>E.g. Yes/ No</em></td> </tr> <tr> <td><em>With/between subjects</em></td> <td><em>Are the experimental conditions shared between or within the participants?</em></td> <td><em>E.g. w/ b</em></td> </tr> <tr> <td><em>Fixed variables A</em></td> <td><em>List of variables reported as constant during the measurements</em></td> <td><em>E.g. Relative humidity/ Metabolic rate</em></td> </tr> <tr> <td><em>Fixed variables A</em></td> <td><em>(Range of) values and their respective units.</em></td> <td><em>E.g. 30-40%/ 1.2 met</em></td> </tr> <tr> <td><em>Summary</em></td> <td><em>Description of the research outome (outcome of the explanatory and/or predictive modelling)</em></td> <td><em>E.g. Lack of perceived control has a significant negative effect on neutral temperatures.</em></td> </tr> <tr> <td><em>Evaluation</em></td> <td><em>Are the participants invited to evaluate their experience once the experiment has been completed? </em></td> <td><em>E.g. Yes/ no</em></td> </tr> </tbody> </table> <p>Note: The data in v1.1.0 has not yet been optimised for analytics.</p>
Cold comfort: metabolic rate and tolerance to low temperatures predict latitudinal distribution in ants
<p class="MsoNormal"><span>Metabolic compensation has been proposed as a mean for ectotherms to cope with colder climates. For example, under the metabolic cold adaptation and the metabolic homeostasis hypotheses (MCA and MHH), it has been formulated that cold-adapted ectotherms should display both higher (MCA) and more thermally sensitive (MHH) metabolic rates (MRs) at lower temperatures. However, whether such compensation can truly be associated with distribution, and whether it interplays with cold-tolerance to support species' climatic niches, remains largely unclear despite broad ecological implications thereof. Here, we teased apart the relationship between MRs, cold-tolerance, and distribution, to test the MCA/MHH among 13 ant species. We report clear metabolic compensation effects, consistent with the MCA and MHH, where MR parameters strongly correlated with latitude and climatic factors across species' distributions. The combination of both cold-tolerance and MR further upheld the best predictions of species' climatic niches. To our knowledge, this is the first study showing that the association of metabolic data with cold-tolerance supports better predictive models of climatic temperature and distribution in social insects than models including cold-tolerance alone. </span><span>These results also highlight that adaptation to higher latitudes in ants involved adjustments of both cold-tolerance and MRs, <span>to</span><span> </span>allow this extremely successful group of insects to thrive under colder climates. </span></p>
Lens Wear Schedules and End-of-Day Comfort
ClinicalTrials.gov study NCT01433549. IPD Sharing: Not stated. Countries: 1. Publications: 1.
Tetracaine Versus Lidocaine Gel for Anesthetic Effect and Comfort in Patients Undergoing LASIK
ClinicalTrials.gov study NCT01383200. IPD Sharing: Not stated. Countries: 1. Publications: 1.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.