Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
4,428
datasets available to search
ShareScore release 0.9.0
Dataset results
4,428 results for “continuous”
Spot and continuous seasonal pCO2 sensor measurements from lagoon and river sites along the Alaska Beaufort Sea coast, 2019-ongoing
pCO2 (partial pressure of carbon dioxide) was measured in multiple seasons and depths in coastal ecosystems as part of the Beaufort Lagoons Ecosystems LTER core sampling program. Sites include several Beaufort Lagoons from across the North Slope of Alaska and several river sites near the lagoons. Data includes averages of sensor data for each site and depth deployment of pCO2 (uatm), CO2 (ppm), water temperature (°C), and absolute pressure (kPa). Standard deviation is included for pCO2 (uatm). Surface measurements were taken either 30 cm below the water surface, or bottom of the ice in ice-cover season, and bottom measurements were taken 30 cm from the seafloor of the lagoons. For lagoon sites, data were logged every one or five minutes; for river sites data were recorded every five minutes. Each site and depth was recorded for at least 30 minutes and up to four hours and taken as spot measurement.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 01-Jan-2021 through 31-Dec-2021
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 01-Jan-2021 through 31-Dec-2021. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE1_Hydro (Sapelo River near Eulonia, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE2_Hydro (Four Mile Island, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE3_Hydro (Sapelo Sound north of Sapelo Island, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE6_Hydro (Doboy Sound south of Sapelo Island, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE7_Hydro (Altamaha River near Carrs Island, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE8_Hydro (Altamaha River near Aligator Creek, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE10_Hydro (Duplin River west of Sapelo Island, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous salinity, temperature and depth measurements from moored hydrographic data loggers deployed at GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 01-Jan-2022 through 31-Dec-2022
Conductivity, temperature and pressure were measured continuously at Georgia Coastal Ecosystems LTER sampling location GCE11_Hydro (Altamaha River near Lewis Creek, Georgia) from 01-Jan-2022 through 31-Dec-2022. Observations were logged at 30 minute intervals by moored Sea-Bird Electronics MicroCAT 37-SM data loggers and downloaded approximately quarterly. Salinity, depth and sigma-t (density anomaly) were calculated from the measured parameters using standard UNESCO algorithms. This data set was collected as part of the GCE-LTER Project continuous salinity, temperature and water level monitoring program.
Continuous Measurement of Canopy Fluorescence at Harvard Forest 2013-2014
Vegetation fluorescence, a very small amount of radiation emitted as a byproduct of photosynthesis, is a direct indicator of plant physiology. Monitoring the solar-induced plant fluorescence provides a powerful tool to understand how the plant photosynthesis responds to environmental factors such as solar radiation, temperature and precipitation as well as to stress and disturbance. We installed the ground-based fluorescence observation system to explore the Franhofer lines in the solar spectrum to monitor the canopy fluorescence. Fluorescence data could also be used to link with eddy covariance data in flux towers, the digital camera data and solar radiation data, providing a good supplementary to numerous data collected at Harvard Forest.
Continuous stream CO2 and temperature data and sensor calibration grab samples from five NEON sites (CARI, COMO, KING, MART, WALK), August 2021-April 2024.
This package contains: 1) sensor-based measurements of dissolved CO2 concentration and temperature, and 2) dissolved CO2 concentration from grab samples that were used to calibrate the sensor data, collected at five stream sites in the NEON network (CARI- Caribou Creek, AK; COMO- Como Creek, CO; KING- Kings Creek, KS; MART- Martha Creek, WA; and WALK- Walker Branch, TN) between August 2021 - April 2024. The grab sample dataset contains a combination of samples collected by NEON (DP1.20097.001) and additional samples collected by project personnel. All samples were collected using the headspace equilibration method, and dissolved CO2 concentrations were calculated using the 'neonDissGas' R package (https://github.com/NEONScience/NEON-dissolved-gas). The sensor dataset contains CO2 concentrations measured with an eosGP CO2 gas probe, averaged to 15-minute intervals and corrected to align with grab sample concentrations using a site-specific grab versus sensor regression. Due to inaccuracies in the eosGP temperature data, we instead include the temperature data from NEON that was used to convert CO2 between units of ppmv and umol/L (DP1.20053.001 for CARI, KING, MART, and WALK, and data from the multiparameter sonde for COMO). All NEON data used in this data package references the RELEASE-2025 version of each data product (downloaded February 2025).
Forest structural diversity at NEON sites in the continuous USA that experienced recent moderate disturbance
Disturbances can change the structural diversity of forests through time, which can be measured from three-dimensional data provided by LiDAR. Discrete-return LiDAR was used to measure a suite of 19 structural diversity metrics that describe the height, cover and openness, vegetation density, and internal and external heterogeneity of forest vegetation at NEON base plots. Discrete-return LiDAR point clouds from the NEON Aerial Observation Platform (DP1.30003.001) were downloaded September of 2020 and used to estimate the metrics within 40 x 40 m base plots. Metrics were estimated from base plots at 15 NEON forested sites from provisional LiDAR data available from 2014 to 2020. The workflow that produced the data was developed in the program R.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.