Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
197
datasets available to search
ShareScore release 0.7.1
Dataset results
197 results for “era5-land”
Zonal Statistics of Climate Indicators from ERA5-Land for Brazilian Municipalities, 2023
<p>Climate indicators are used in several statistical models for many research areas and are specially important for modelling Climate Sensitive Diseases (CSD) incidence. Those models usually adopts a lattice structure, where its data is aggregated at administrative boundaries (e.g. disease incidence), but climate indicators are usually presented in a continuous regular grid format.</p> <p>To make climate indicators compatible with lattice structures, zonal statistics may be adopted. Zonal statistics are descriptive statistics calculated using a set of cells that spatially intersects a given spatial boundary. For each boundary in a map, statistics like average, maximum value, minimum value, standard deviation, and sum are obtained to represent the cell's values that intersect the boundary.</p> <p>This dataset present zonal statistic of climate indicators computed from Copernicus ERA5-Land daily aggregates for the Brazilian municipalities, for the year of 2023.</p>
Decadal time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (2000 - 2021) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds.<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>The resulting relative humidity has been aggregated to decadal averages. Each month is divided into three decades: the first decade of a month covers days 1-10, the second decade covers days 11-20, and the third decade covers days 21-last day of the month.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; dD = number of decade):<br> <code>ERA5_land_rh2m_avg_decadal_YYYY_MM_dD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Decadal</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7427010">https://zenodo.org/record/7427010</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 5: 2020 - 2021) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7434396">https://zenodo.org/record/7434396</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 3: 2010 - 2014) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7432432">https://zenodo.org/record/7432432</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 4: 2015 - 2019) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7434447">https://zenodo.org/record/7434447</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 1: 2000 - 2004) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/6147830">https://zenodo.org/record/6147830</a></p>
Daily time series of spatially enhanced relative humidity for Europe at 30 arc seconds resolution (Set 2: 2005 - 2009) derived from ERA5-Land data
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Processing steps:<br> The original hourly ERA5-Land air temperature 2 m above ground and dewpoint temperature 2 m data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (<a href="https://chelsa-climate.org/">https://chelsa-climate.org/</a>). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>Subsequently, the temperature time series have been aggregated on a daily basis. From these, daily relative humidity has been calculated for the time period 01/2000 - 07/2021.</p> <p>Relative humidity (rh2m) has been calculated from air temperature 2 m above ground (Ta) and dewpoint temperature 2 m above ground (Td) using the formula for saturated water pressure from Wright (1997):</p> <p><code>maximum water pressure = 611.21 * exp(17.502 * Ta / (240.97 + Ta))</code></p> <p><code>actual water pressure = 611.21 * exp(17.502 * Td / (240.97 + Td))</code></p> <p><code>relative humidity = actual water pressure / maximum water pressure</code></p> <p>Data provided is the daily averages of relative humidity. This set provides data for the years 2000 - 2004. For other time periods, please see further linked data sets.</p> <p>Resultant values have been converted to represent percent * 10, thus covering a theoretical range of [0, 1000].</p> <p>File naming scheme (YYYY = year; MM = month; DD = day):<br> <code>ERA5_land_rh2m_avg_daily_YYYYMMDD.tif</code></p> <p>Projection + EPSG code:<br> Latitude-Longitude/WGS84 (EPSG: 4326)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 30 arc seconds (approx. 1000 m)</p> <p>Temporal resolution:<br> Daily</p> <p>Pixel values:<br> Percent * 10 (scaled to Integer; example: value 738 = 73.8 %)</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://apps.ecmwf.int/datasets/licences/copernicus/">https://apps.ecmwf.int/datasets/licences/copernicus/</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Reference: Wright, J.M. (1997): Federal meteorological handbook no. 3 (FCM-H3-1997). Office of Federal Coordinator for Meteorological Services and Supporting Research. Washington, DC</p> <p>Data is also available in EU LAEA (EPSG: 3035) projection: <a href="https://zenodo.org/record/7434376">https://zenodo.org/record/7434376</a></p>
Improving ERA5-Land soil temperature in permafrost regions
<p>Cao et al. (2020) have previously reported a warm bias in ERA5-Land soil temperature in permafrost regions that was supposedly being caused by an underestimation of the snow density. This study evaluates a new multi-layer snow scheme in the land surface scheme of ERA5-Land, i.e., HTESSEL, with a revised snow densification parametrization. The revised HTESSEL significantly improved the representation of soil temperature in permafrost regions compared to ERA5-Land.</p> <p>The original simulation data, on the Octahedral reduced gaussian grid, were interpolated on a 0.25/0.25 regular lat/lon grid (global) and aggregated in daily mean from 2000-01-01 to 2018-12-31. More information on the dataset is contained in info_dataset.txt</p>
ERA5-Land weekly: Surface temperature, weekly time series for Europe at 1 km resolution (2016 - 2020)
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Surface temperature:<br> Temperature of the surface of the Earth. The skin temperature is the theoretical temperature that is required to satisfy the surface energy balance. It represents the temperature of the uppermost surface layer, which has no heat capacity and so can respond instantaneously to changes in surface fluxes.</p> <p>Processing steps:<br> The original hourly ERA5-Land data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (https://chelsa-climate.org/). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>The spatially enhanced daily ERA5-Land data has been aggregated on a weekly basis (starting from Saturday) for the time period 2016 - 2020. Data available is the weekly average of daily averages, the weekly minimum of daily minima and the weekly maximum of daily maxima of surface temperature.</p> <p>File naming:<br> Average of daily average: <code>era5_land_ts_avg_weekly_YYYY_MM_DD.tif</code><br> Max of daily max: <code>era5_land_ts_max_weekly_YYYY_MM_DD.tif</code><br> Min of daily min: <code>era5_land_ts_min_weekly_YYYY_MM_DD.tif</code></p> <p>The date in the file name determines the start day of the week (Saturday).</p> <p>Pixel values:<br> °C * 10 Example: Value 302 = 30.2 °C</p> <p>The QML or SLD style files can be used for visualization of the temperature layers.</p> <p>Coordinate reference system:<br> ETRS89 / LAEA Europe (EPSG:3035) (EPSG:3035)</p> <p>Spatial extent:<br> north: 82N<br> south: 18S<br> west: -32W<br> east: 61E</p> <p>Spatial resolution:<br> 1 km</p> <p>Temporal resolution:<br> weekly</p> <p>Time period:<br> 01/01/2016 - 12/31/2020</p> <p>Format: GeoTIFF</p> <p>Representation type: Grid</p> <p>Software used:<br> GRASS 8.0</p> <p>Original ERA5-Land dataset license:<br> <a href="https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf">https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Other resources:<br> https://data.mundialis.de/geonetwork/srv/eng/catalog.search#/metadata/601ea08c-0768-4af3-a8fa-7da25fb9125b</p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Contact:<br> mundialis GmbH & Co. KG, info@mundialis.de</p>
ERA5-Land weekly: Air temperature at 2 meter above surface, weekly time series for Europe at 1 km resolution (2016 - 2020)
<p>Overview:<br> ERA5-Land is a reanalysis dataset providing a consistent view of the evolution of land variables over several decades at an enhanced resolution compared to ERA5. ERA5-Land has been produced by replaying the land component of the ECMWF ERA5 climate reanalysis. Reanalysis combines model data with observations from across the world into a globally complete and consistent dataset using the laws of physics. Reanalysis produces data that goes several decades back in time, providing an accurate description of the climate of the past.</p> <p>Air temperature (2 m):<br> Temperature of air at 2m above the surface of land, sea or in-land waters. 2m temperature is calculated by interpolating between the lowest model level and the Earth's surface, taking account of the atmospheric conditions.</p> <p>Processing steps:<br> The original hourly ERA5-Land data has been spatially enhanced from 0.1 degree to 30 arc seconds (approx. 1000 m) spatial resolution by image fusion with CHELSA data (V1.2) (https://chelsa-climate.org/). For each day we used the corresponding monthly long-term average of CHELSA. The aim was to use the fine spatial detail of CHELSA and at the same time preserve the general regional pattern and fine temporal detail of ERA5-Land. The steps included aggregation and enhancement, specifically:<br> 1. spatially aggregate CHELSA to the resolution of ERA5-Land<br> 2. calculate difference of ERA5-Land - aggregated CHELSA<br> 3. interpolate differences with a Gaussian filter to 30 arc seconds<br> 4. add the interpolated differences to CHELSA</p> <p>The spatially enhanced daily ERA5-Land data has been aggregated on a weekly basis starting from Saturday for the time period 2016 - 2020.<br> Data available is the weekly average of daily averages, the weekly minimum of daily minima and the weekly maximum of daily maxima of air temperature (2 m).</p> <p>File naming:<br> Average of daily average: <code>era5_land_t2m_avg_weekly_YYYY_MM_DD.tif</code><br> Max of daily max: <code>era5_land_t2m_max_weekly_YYYY_MM_DD.tif</code><br> Min of daily min: <code>era5_land_t2m_min_weekly_YYYY_MM_DD.tif</code></p> <p>The date in the file name determines the start day of the week (Saturday).</p> <p>Pixel value:<br> °C * 10<br> Example: Value 44 = 4.4 °C</p> <p>The QML or SLD style files can be used for visualization of the temperature layers.</p> <p>Coordinate reference system:<br> ETRS89 / LAEA Europe (EPSG:3035) (EPSG:3035)</p> <p>Spatial extent:<br> north: 82:00:30N<br> south: 18N<br> west: 32:00:30W<br> east: 70E</p> <p>Spatial resolution:<br> 1km</p> <p>Temporal resolution:<br> weekly</p> <p>Time period:<br> 01/01/2016 - 12/31/2020</p> <p>Format: GeoTIFF</p> <p>Representation type: Grid</p> <p>Software used:<br> GDAL 3.2.2 and GRASS GIS 8.0.0 (r.resamp.stats -w; r.relief)</p> <p>Lineage:<br> Dataset has been processed from original Copernicus Climate Data Store (ERA5-Land) data sources. As auxiliary data CHELSA climate data has been used.</p> <p>Original ERA5-Land dataset license:<br> <a href="https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf">https://cds.climate.copernicus.eu/api/v2/terms/static/licence-to-use-copernicus-products.pdf</a></p> <p>CHELSA climatologies (V1.2):<br> Data used: Karger D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E, Linder, H.P., Kessler, M. (2018): Data from: Climatologies at high resolution for the earth's land surface areas. Dryad digital repository. <a href="http://dx.doi.org/doi:10.5061/dryad.kd1d4">http://dx.doi.org/doi:10.5061/dryad.kd1d4</a><br> Original peer-reviewed publication: Karger, D.N., Conrad, O., Böhner, J., Kawohl, T., Kreft, H., Soria-Auza, R.W., Zimmermann, N.E., Linder, P., Kessler, M. (2017): Climatologies at high resolution for the Earth land surface areas. Scientific Data. 4 170122. <a href="https://doi.org/10.1038/sdata.2017.122">https://doi.org/10.1038/sdata.2017.122</a></p> <p>Other resources:<br> <a href="https://data.mundialis.de/geonetwork/srv/eng/catalog.search#/metadata/601ea08c-0768-4af3-a8fa-7da25fb9125b">https://data.mundialis.de/geonetwork/srv/eng/catalog.search#/metadata/601ea08c-0768-4af3-a8fa-7da25fb9125b</a></p> <p>Processed by:<br> mundialis GmbH & Co. KG, Germany (<a href="https://www.mundialis.de/">https://www.mundialis.de/</a>)</p> <p>Contact:<br> mundialis GmbH & Co. KG, info@mundialis.de</p>
Data used in 'Local Wind Regime Induced by Giant Linear Dunes: Comparison of ERA5-Land Reanalysis with Surface Measurements.'
<p>This repository contains the data used in:</p> <blockquote> <p>Gadal, C., Delorme, P., Narteau, C. et al. Local Wind Regime Induced by Giant Linear Dunes: Comparison of ERA5-Land Reanalysis with Surface Measurements. Boundary-Layer Meteorol 185, 309–332 (2022). <a href="https://doi.org/10.1007/s10546-022-00733-6">https://doi.org/10.1007/s10546-022-00733-6</a></p> </blockquote> <p>where wind data measured at 4 different places in and across the Namib Sand Sea are compared to the data from the ERA5/ERA5Land climate reanalyses.</p> <p>The use this data, one should first look at the GitHub repository <a href="https://github.com/Cgadal/GiantDunes">https://github.com/Cgadal/GiantDunes</a> and at the corresponding documentation <a href="https://cgadal.github.io/GiantDunes/">https://cgadal.github.io/GiantDunes/</a>. The description sometimes refers to scripts used in <a href="https://github.com/Cgadal/GiantDunes/tree/master/Processing">https://github.com/Cgadal/GiantDunes/tree/master/Processing</a>.</p> <p>The two folders 'raw_data' and 'processed_data' contain the input raw_data, and the output data after processing used to make the paper figures, respectively. In each of them, '.npy' files contain Python dictionaries with different variables in them. They can be loaded using the Python library <code>numpy</code> as <code>data = np.load('file.npy', allow_pickle=True).item()</code>; and the different keys (variables) can be printed with <code>data.keys()</code> or <code>data[station].keys()</code> if <code>data.keys()</code> return the different stations. Unless specified otherwise below, note that all variables are given in the International System of Units (SI), and wind direction is given anticlockwise, with the 0 being a wind blowing from the West to the East.</p> <ul> <li>raw_data: <ul> <li>DEM: contains the Digital Elevation Models of the two stations from the SRTM30, downloaded from here: https://dwtkns.com/srtm30m/</li> <li>ERA5: hourly data from the ER5 climate reanalysis, on surface (_BLH) and pressure levels (_levels). Downloaded from https://cds.climate.copernicus.eu/</li> <li>ERA5Land: hourly data from the ER5Land climate reanalysis Downloaded from https://cds.climate.copernicus.eu/</li> <li>KML_points: kml points of the measurement station. It can be opened directly in GoogleEarth.</li> <li>measured_wind_data: contains the measured in situ data. The windspeed is measured using Vector Instruments A100-LK cup anemometers, the wind direction using Vector Instruments W200-P wind vane and the time using Campbell Instruments CR10X and CR1000X dataloggers.<br> </li> </ul> </li> <li>processed_data: <ul> <li>'Data_preprocessed.npy': preprocessed_data, output of 1_data_preprocessing_plot.py</li> <li>'Data_DEM.npy': properties of the processed DEM, the output of 2_DEM_analysis_plot.py</li> <li>'Data_calib_roughness.npy': data from the calibration of the hydrodynamic roughnesses, the output of 3_roughness_calibration_plot.py</li> <li>'Data_final.npy': file containing all computed quantities</li> <li>'time_series_hydro_coeffs.npy': file containing the time series of the calculated hydrodynamic coefficients by '5_norun_hydro_coeff_time_series.npy'.</li> </ul> </li> </ul> <p> Depending on the loaded data file, main dictionary keys can be:</p> <ul> <li>'lat': latitude, in degree</li> <li>'lon': longitude, in degree</li> <li>'time': time vector, in datetime objects (https://docs.python.org/3/library/datetime.html)</li> <li>'DEM': elevation data array in [m], with dimensions matching 'lat' and 'lon' vectors</li> <li>'z_mes', 'z_insitu', 'z_ERA5LAND': height of the corresponding velocity</li> <li>'direction': measured wind direction, in [degrees]</li> <li>'velocity': measured wind velocity, in [m/s]</li> <li>'orientaion': dune pattern orientation, [deg]</li> <li>'wavelength': dune pattern wavelength, [km]</li> <li>'z0_insitu': chosen hydrodynamic roughness for the considered station.</li> <li>'U_insitu', 'Orientation_insitu': hourly averaged measured wind velocities and direction</li> <li>'U_era', 'Orientation_era': hourly 10m wind data from the ERA5Land data set</li> <li>'Boundary layer height', 'blh': boundary layer height from the hourly ERA5 dataset</li> <li>'Pressure levels', 'levels': Pressure levels from the pressure levels ERA5 dataset</li> <li>'Temperature', 't': Temperature from the pressure levels ERA5 dataset</li> <li>'Specific humidity', 'q': Specific humidity from the pressure levels ERA5 dataset</li> <li>'Geopotential', 'z': Geopotential from the pressure levels ERA5 dataset</li> <li>'Virtual_potential_temperature': Virtual potential temperature calculated from the pressure levels ERA5 dataset</li> <li>'Potential_temperature': Potential temperature calculated from the pressure levels ERA5 dataset</li> <li>'Density': Density calculated from the pressure levels ERA5 dataset</li> <li>'height': Vertical coordinates calculated from the pressure levels ERA5 dataset</li> <li>'theta_ground': Averaged virtual potential temperature within the ABL.</li> <li>'delta_theta': Virtual potential temperature at the ABL.</li> <li>'gradient_free_atm': Virtual potential temperature gradient in the FA.</li> <li>'Froude': time series of the Froude number U/((delta_theta/theta_ground)*g*BLH)</li> <li>'kH': time series of the number 'kH'</li> <li>'kLB': time series of the internal Froude number kU/N</li> </ul> <p>Other keys are not relevant and are stored for verification purposes. For more details, please contact Cyril Gadal (see authors), and look at the following GitHub repository: <a href="https://github.com/Cgadal/GiantDunes">https://github.com/Cgadal/GiantDunes</a>, where all the codes are present.<br> </p>
ERA5-Land selected indicators daily aggregates for Africa, 2010
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2010.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2013
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2013.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2015
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2015.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2016
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2016.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2017
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2017.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2014
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2014.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2019
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2019.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2012
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2012.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ERA5-Land selected indicators daily aggregates for Africa, 2018
<p>This deposit contains NetCDF files with daily aggregates from Copernicus Era5-Land for eight selected indicators, covering Africa for 2018.</p> <p>Each file represents one indicator aggregation for one month of the year. Inside each NetCDF file, the layers contain the daily aggregates.</p> <p>For 2m dewpoint pressure, 10m u-component of wind, 10m v-component of wind, surface pressure, the mean function was used for aggregation. For total precipitation, the sum function was used for aggregation. For 2m temperature, the functions maximum, mean, and minimum were used for aggregation.</p> <p>Those files were created using the <a href="https://github.com/ErikKusch/KrigR">KrigR</a> package.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.