Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
9
datasets available to search
ShareScore release 0.9.0
Dataset results
9 results for “flume test”
Flume Erosion Testing Data of Root-Permeated and Organic Matter Amended Soil Samples Using Three Streambank Boundary Conditions.
The data published here is expected to accompany one publicly available dissertation (Chapter 6 of dissertation) and one separate journal publication. Once published and available online, the metadata will be updated with the relevant article information. The journal article/dissertation will have additional information regarding the published datasets and the methods used to collect the data. All data collected from these studies, and the accompanying Acoustic Doppler Profiler MATLAB files, are presented here. Journal Article title: Artificial Roots and Soil Microorganisms Increase Soil Resistance to Fluvial Erosion
Flume Experiment Testing the Impact of Artificial Streambank Roots on Velocity, Reynold's Shear Stress, and Turbulent Kinetic Energy using an Acoustic Doppler Profiler
The data published here is expected to accompany one publicly available dissertation (Chapter 4 of dissertation) and one separate journal publication. Once published and available online, the metadata will be updated with the relevant article information. The journal article/dissertation will have additional information regarding the published datasets and the methods used to collect the data. All data collected from these studies, and the accompanying Acoustic Doppler Profiler MATLAB files, are presented here. Journal Article title: Impact of Flexible and Rigid Artificial Roots on Stream Hydrodynamics
Flume Erosion Testing of Unamended and Organic Matter Amended Soil Samples Using an Acoustic Doppler Profiler, 2021
This data accompanies a publication titled "Soil Amended with Organic Matter Increases Fluvial Erosion Resistance of Cohesive Streambank Soil". Briefly, fluvial erosion testing was conducted on soil samples using an indoor flume channel. Soil samples were previously collected from the riparian zone of a river near Virginia Tech's campus in Blacksburg, VA, USA. The soil was subsequently air-dried and stored until use. Prior to erosion testing, soil samples were amended with varying amounts of organic matter (0%, 1%, and 4% OM by mass), compacted to a bulk density of 0.95 KilogramsPerCubicCentiMeters in growth containers, and allowed to mature in a greenhouse setting for 50 days prior to flume erosion testing. An Acoustic Doppler Profiler (ADP) was used to measure soil erosion and collect three-dimensional velocity data during erosion tests; raw velocity and soil depth data for each sample tested were stored in MATLAB files. Follow testing, the soil remaining from each sample was collected, stored, and analyzed for aggregate stability, soil organic matter (SOM), and extracellular polymeric substances (EPS). Additionally, soil temperature, water temperature, and volumetric water content were also measured prior to or during erosion testing. Data collected from this study, and the accompanying ADP MATLAB files, are presented here.
Datasets, codes and video clips for the laboratory flume tests of granular flow
<p>Datasets, video clips, and codes related to the paper 'Insight into granular flow dynamics relying on basal stress measurements: from experimental flume tests', submitted to the Journal of Geophysical Research: Solid Earth.</p> <p>The datasets provides the raw and processed data for the laboratory flume tests of granular flow including parameters reflecting the granular flow behavior, basal normal stresses measured by a force plate, and deposit parameters of the granular flows.</p> <p><strong>S1_data_granular flow_velocity</strong> provides data of the velocity profiles with a 0.1 second time interval, the depth-averaged velocities, the depth-averaged shear rates, and the solid inertial stresses of the granular flows under different experimental conditions. The original data were calculated through particle image velocimetry (PIV) method. The images for PIV analysis were recorded by a high-speed camera.</p> <p><strong>S2_data_granular flow_stress</strong> provides the raw data of the measured basal normal stresses of the granular flows for all tests. The mean and fluctuating stress components extracted by applying a moving window average filter are also listed in the Table.</p> <p><strong>S3_data_granular flow_flow depth</strong> provides the data of the granular flow depth extracted every 0,02 s through a image processing method based on the high-speed photographs. </p> <p><strong>S4_data_granular flow_deposit</strong> provides the parameters of the granular flow deposits for all tests including the apparent friction coefficient and equivalent friction coefficient. The deposit parameters were calculated based on the digital surface model (DSM) of deposit, which were obtained through a oblique photogrammetry method.</p> <p><strong>S5_data_granular flow_density</strong> gives the data of the dynamic bulk flow densities of the granular flows under all experimental conditions. The dynamic bulk densities were calculated according to the measured and calculated normal stresses.</p> <p>The videos of the granular flows under different experimental conditions during their propagation are provided in <strong>'S6_video_granular flow.zip'</strong> to show the granular flow behavior and its evolution. <strong>S6_video_granular flow</strong> includes the side-view of the granular flows under all experimental conditions and front-view of the IMF-223 granular flow . </p> <p><strong>S7_codes_data analysis</strong> provides the computer codes for the extraction of mean and fluctuating components and the calculation of granular flow depth. The former includes one file for conducting moving average filter. The latter contains four files, which are used for median filter, image erosion, threshold segmentation and floodfill, extracting flow depth. </p>
Video of Metareef device tested in a wave flume
<p>Video illustrating the attenuation of water waves by an array of oscillating resonators (cylinders) in a wave flume at Politecnico di Torino.</p> <p>See https://doi.org/10.1063/5.0048613 or https://arxiv.org/abs/2104.08243</p> <p> </p> <p> </p><p> </p> <p></p>
A supplementary file for manuscript submission - Videos of flume test Events
<p>The ZIP file contains 7 videos clips of a flume test for landslide dam breach. The videos are the Supplementary Materials for a manuscript to be submitted to a journal in August, 2021 for possible publication. The ZIP file is uploaded on August 19, 2021 by Prof. Zheng-yi Feng.</p>
Effects of Relative Density in Progressive Sliding of Tailing Deposits: An Insight from Flume Tests
<p>Ruptures of tailing deposits can exhibit flow-like behavior and cause major disasters. An extensive mass of tailings can be transported over large distances at high velocity and flood downstream villages, resulting in the loss of lives and huge property losses. We present a series of flume tests to observe the process of tailing slope failure when subjected to a water flow. Progressive flow slides were observed in a range of tailing deposits with varying relative densities, in which hydraulic conductivity reduced with increasing relative density. The generation of pore pressure caused rupture for very loose and loose deposits, and is evident in acoustic emission signals. The water inflow into dense slopes is slower due lower hydraulic conductivity, resulting in successive sliding starting at the toe and progressing within the soil mass. A relative density of 0.35 is a transitional density from a sudden overall failure to a progressive failure.Ruptures of tailing deposits can exhibit flow-like behavior and cause major disasters. An extensive mass of tailings can be transported over large distances at high velocity and flood downstream villages, resulting in the loss of lives and huge property losses. We present a series of flume tests to observe the process of tailing slope failure when subjected to a water flow. Progressive flow slides were observed in a range of tailing deposits with varying relative densities, in which hydraulic conductivity reduced with increasing relative density. The generation of pore pressure caused rupture for very loose and loose deposits, and is evident in acoustic emission signals. The water inflow into dense slopes is slower due lower hydraulic conductivity, resulting in successive sliding starting at the toe and progressing within the soil mass. A relative density of 0.35 is a transitional density from a sudden overall failure to a progressive failure.</p>
Data from: Two-current choice flumes for testing avoidance and preference in aquatic animals
Aquatic chemical ecology is an important and growing field of research that involves understanding how organisms perceive and respond to chemical cues in their environment. Research assessing the preference or avoidance of a water source containing specific chemical cues has increased in popularity in recent years, and a variety of methods have been described in the scientific literature. Two-current choice flumes have seen the greatest increase in popularity, perhaps because of their potential to address the broadest range of research questions. Here, we review the literature on two-current choice flumes and show that there is a clear absence of standardized methodologies that make comparisons across studies difficult. Some of the main issues include turbulent flows that cause mixing of cues, inappropriate size of choice arenas for the animals, short experiments with stressed animals, failure to report how experiment and researcher biases were eliminated, general underreporting of methodological details, underutilization of collected data and inappropriate data analyses. In this review, we present best practice guidelines on how to build, test and use two-current choice flumes to measure the behavioural responses of aquatic animals to chemical cues, and provide blueprints for flume construction. The guidelines include steps that can be taken to avoid problems commonly encountered when using two-current choice flumes and analysing the resulting data. This review provides a set of standards that should be followed to ensure data quality, transparency and replicability in future studies in this field.
Data from: Two-current choice flumes for testing avoidance and preference in aquatic animals
Open the record for dataset details and reuse information.
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.