Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
931
datasets available to search
ShareScore release 0.7.1
Dataset results
931 results for “netcdf”
SBC LTER: Time series of quarterly NetCDF files of kelp biomass in the canopy from Landsat 5, 7 and 8, since 1984 (ongoing)
This data file represents a time series of canopy area of giant kelp, Macrocystis pyrifera, and bull kelp, Nereocystis luetkeana, and canopy biomass of giant kelp derived from Landsat 5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), Landsat 8 Operational Land Imager (OLI), and Landsat 9 Operational Land Imager 2 satellite imagery, along with relevant metadata. The kelp canopy is composed of the portions of fronds and stipes floating on the surface of the water. Canopy area (m) data are given for individual 30 x 30 meter pixels for all coastal areas of Baja California, Mexico, California, Oregon, and the outer coast of Washington (including offshore islands). Biomass data (wet weight, kg) are given for individual 30 x 30 meter pixels in the coastal areas extending from near Ano Nuevo, CA through the southern range limit in Baja California (including offshore islands), representing the range where giant kelp is the dominant canopy forming species. Data were derived from the three Landsat sensors listed above. Observations are made on a 16 day repeat cycle, for each instrument, but the temporal coverage is irregular because of cloud cover, instrument failure, and the mission length of each sensor (TM: 1984 – 2011, ETM+: 1999 – present, OLI: 2013 – present). Estimates of canopy area are derived from the fractional cover of kelp canopy determined from satellite surface reflectance. Estimates of kelp canopy biomass are derived from the relationship between giant kelp fractional cover determined from satellite surface reflectance and empirical measurements of giant kelp canopy biomass in long-term SBC LTER study plots obtained using SCUBA. The different Landsat sensors were calibrated to each other using simulated Landsat data derived from hyperspectral imagery. Missing data due to the ETM+ scan line corrector error were filled using a synchrony-based gap filling method. Data are organized into a single NetCDF file and contain the quarterly area and
SAMI3 data in netCDF format (2019-Mar-28)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-29)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-25)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-23)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-24)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-22)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-27)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-20)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-19)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-18)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-17)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-21)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-26)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-15)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-12)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-11)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-10)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-14)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
SAMI3 data in netCDF format (2019-Mar-08)
<p>SAMI3 (Sami3 is Also a Model of the Ionosphere) is a seamless, three-dimensional, physics-based model of the ionosphere (Huba et al, 2008). It is based on SAMI2, a two-dimensional model of the ionosphere (Huba et al., 2000). <br><br>SAMI3 models the plasma and chemical evolution of seven ion species (H⁺, He⁺, N⁺, O⁺, N⁺₂, NO⁺ and O⁺₂). The temperature equation is solved for three ion species (H⁺, He⁺ and O⁺) and for the electrons. Ion inertia is included in the ion momentum equation for motion along the geomagnetic field. This is important in modeling the topside ionosphere and plasmasphere where the plasma becomes collisionless. <br><br>SAMI3 includes 21 chemical reactions and radiative recombination, and uses a nonorthogonal, nonuniform, fixed grid for the magnetic latitude range +/- 89 degrees.. <br><br><b>Drivers</b><br>Neutral composition, temperature, and winds: NRLMSISE00 (Picone et al., 2002) and HWM14 (Drob et al., 2015). <br>Solar radiation: Flare Irradiance Spectral Model version 2 (FISM v2)<br>Magnetic field: Richmond apex model [Richmond, 1995]. <br>Neutral wind dynamo electric field: Determined from the solution of a 2D potential equation [Huba et at., 2008]. <br>For the SAMI3/Weimer configuration: High latitude electric field: calculated from the empirical Weimer model for the potential. <br>For the SAMI3/AMPERE configuration: High latitude electric field: calculated using the Magnetosphere-Ionosphere Coupling solver (MIX) developed by Merkin and Lyon (2010). The inputs to MIX are SAMI3's internal conductances, plus field-aligned current observations from Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE), derived from the 66+ satellite Iridium NEXT constellation's engineering magnetometer data. This potential calculation is described in Chartier et al (2022). <br><br>For ease of use, SAMI3 output is remapped to a regular grid using the Earth System Modeling Framework by Hill et al (2004)</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.