Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
4,419
datasets available to search
ShareScore release 0.9.0
Dataset results
4,419 results for “operator”
Concrete Permuted Rule Operations
Open the record for dataset details and reuse information.
WILLOW - Norther: data set for the full-scale validation of model-based virtual sensing methods for an operational offshore wind turbine
<h1><em><strong>1. General description </strong></em></h1> <p>This data set contains as-build design information, as well as full-scale vibration response measurements from an operational offshore wind-turbine. The turbine is part of the Norther wind farm which is located in the Belgian North Sea<em> </em>and includes a total of 44 Vestas V164 (8.4MW) wind turbines on monopile foundations, see <a href="../api/records/11093262/draft/files/Fig1_Norther_locaction.png/content" target="_blank" rel="noopener noreferrer">Fig1_Norther_locaction.png</a>. This data set is intended to verify and validate model-based virtual sensing algorithms, using data as well as modeling information from a real turbine. </p> <h2><em><strong>1.1 Summary of the shared structural information</strong></em></h2> <p>The included information entails a detailed description of the geometric properties of the monopile and transition piece, distributed and lumped structural masses . All information shared in this record is conform the as-designed documentation. An example of the lumped masses considered in the model input files is presented in "<a href="../api/records/11093262/draft/files/Fig2_Sensor_Network.png/content" target="_blank" rel="noopener">Fig2_Sensor_Network.png"</a></p> <h2><em><strong>1.2 Summary of the shared geotechnical information</strong></em></h2> <p>Monopiles are distinguished by the significant role of soil-structure interaction. Ground reaction is most typically included in the structural model as non-linear p-y curves. Different p-y curves are available for a certain number of soils in the standards applicable to offshore structures (API RP 2GEO, 2011, and ISO 19901-4:2016(E), 2016).</p> <p>The required soil properties to define p-y curves according to the API framework are given in the soil profile provided in a separate Excel. Rather than symbols, the name of the soil properties is generally used as column header (e.g., <em>Undrained shear strength</em>). Therefore, it is straightforward to identify each soil parameter. The only soil parameter that might lead to confusion is:</p> <ul> <li><em>"epsilon50 [-]" </em>represents the vertical strain at half the maximum principal stress difference in a static undrained triaxial compression test on an undisturbed soil sample.</li> </ul> <p>It's worthy to note that estimates for the small shear strain stiffness, referred to as Gmax, are also included. Despite not being required as an input to define the API p-y curves, this parameter remains a key input for other soil reaction frameworks than the API (e.g., PISA). </p> <h2><em><strong>1.3 Summary of the shared measurement data</strong></em></h2> <p>Two sets of measurement data have been curated for validation purposes; the first interval has been collected during parked conditions, whereas the second interval has been collected during rated operational conditions. Both records have a length of 2 hours, and are subdivided into 10-minute data sets. Furthermore 1Hz SCADA data has been made available for the selected intervals. All different data sources are time synchronized and have been subjected to several internal quality checks. </p> <p>The sensor network on NRT-WTG is illustrated in in <strong>Fig. 2, </strong>whereas a description of the sensor types is presented in <strong>Tab.1.</strong> The acceleration sensors are installed in the horizontal plane, and measure tangential (Y) and orthogonal (X) to the wall, where the positive Y direction is pointing clockwise and the positive X direction is pointing inwards. All strain sensors are installed vertically and are located on the inside of the wall.</p> <table> <tbody> <tr> <td><strong>Data type </strong></td> <td><strong>Sensor type</strong></td> <td><strong>Fs (Hz)</strong></td> <td> <p><strong>Level mLAT (m)</strong></p> </td> <td><strong>Description </strong></td> </tr> <tr> <td>Acceleration (g) </td> <td>Piezo-electric acc. sensor (<strong>ACC</strong>)</td> <td>30</td> <td>15, 69, 97 </td> <td>3 Bi-directional accelerometers at different levels. LAT 15 installed at 240 degree heading; LAT 69 and 97 at 60 degree.</td> </tr> <tr> <td>Strain (micro strain)</td> <td>Resistive strain gauge (<strong>SG</strong>)</td> <td>30</td> <td>14</td> <td>6 SGs: equally spaced around the inner circumference of the can. Headings: 50, 110, 170, 230, 290, 350 degree.</td> </tr> <tr> <td>Strain (micro strain)</td> <td>Fiber-Bragg Grating strain gauge (<strong>FBG</strong>)</td> <td>100</td> <td>-17, -19</td> <td>2 FBGs per level at 165 and 255 degree respectively.</td> </tr> </tbody> </table> <p><strong>Table 1. Description of sensor types.</strong></p> <p>The FBG strain time series have been synchronized with the SG time series using using a cross-correlation based approach. Therefore the SG data has been used to genereate refrence strain time series at the headings of the FBG sensors; the FBG data is subsequently synchronized with regard to this reference time series. No synchronization of the acceleration data was needed, since these are collected using the same data aquisition system as the SG data. </p> <p>The SG strain time series have been calibrated and temperature compensated, whereas this is not the case for the FBG strain time series. The latter have a yet to be determined calibration offset. </p> <p>In conjunction to the sensor channels presented in <strong>Tab. 1</strong>, 1 Hz SCADA data is provided. A summary of the provided SCADA parameters, all sampled at 1Hz, is presented in <strong>Tab 2.</strong></p> <table> <tbody> <tr> <td><strong>Parameter</strong></td> <td><strong>Unit</strong></td> <td><strong>Description</strong></td> </tr> <tr> <td>Wind speed</td> <td>m/s</td> <td>Wind speed as recorded in the turbine SCADA</td> </tr> <tr> <td>Wind direction</td> <td>°</td> <td>Wind direction relative to North (0°) as recorded in the turbine SCADA</td> </tr> <tr> <td>Yaw angle</td> <td>°</td> <td>Yaw orientation of the nacelle relative to North (0°) as recorded in the turbine SCADA</td> </tr> <tr> <td>Pitch angle</td> <td>°</td> <td>Rotor blade pitch as recorded in the turbine SCADA</td> </tr> <tr> <td>Rotor speed</td> <td>rpm</td> <td>Rotor speed in rotations per minute as recorded in the turbine SCADA</td> </tr> <tr> <td>Power</td> <td>kW</td> <td>Active power of the turbine as recorded in the turbine SCADA</td> </tr> </tbody> </table> <p><strong>Table 2. </strong>List of provided SCADA parameters</p> <p> </p> <p>A summary of the selected intervals and relevant corresponding scada parameters is given in <strong>Tab 3</strong>.</p> <table> <tbody> <tr> <td><strong>Scenario </strong></td> <td><strong>T1 (UTC)</strong></td> <td><strong>T2 (UTC) </strong></td> <td><strong>Windspeed</strong></td> <td><strong>RPM </strong></td> <td><strong>Pitch </strong></td> </tr> <tr> <td>Parked</td> <td> <p>03/07 01:30</p> </td> <td> <p>03/07 03:30</p> </td> <td>< 4.5 m/s</td> <td>~1</td> <td>~18 °</td> </tr> <tr> <td>Rated</td> <td> <p>05/07 22:30</p> </td> <td> <p>06/07 00:30 </p> </td> <td>~15 m/s</td> <td>10.5</td> <td>8.1°</td> </tr> </tbody> </table> <p><strong>Table 3. </strong>Selected data intervals and relevant scada parameters</p> <p> </p> <h1><em><strong>2. Included in this version </strong></em></h1> <h2><em><strong>2.1 Version - 0.1.0</strong></em></h2> <ul> <li>Relevant Design information can be found in: <ul> <li>Geometry data for NRT-WTG: "WILLOW-Geometry_v4.xlsx"</li> <li>Best estimate soil profile: "WILLOW-BE_soil_profile.xlsx"</li> </ul> </li> <li>Acceleration, strain and scada data can be found in the following parquet files: <ul> <li>Measurement data for the parked case: "NRT-WTG_Parked.parquet.gz"</li> <li>Measurement data for the rated case: "NRT-WTG_Rated.parquet.gz"</li> </ul> </li> </ul> <p> </p> <h1><em><strong>3. Importing parquet files </strong></em></h1> <p>To import the measurement data into Python it is recommended to use pandas:</p> <pre>import pandas as pd<br># Read Parquet file with Pandas: relative_file_path = '<a href="../api/records/11093262/draft/files/NRT-WTG_Parked.parquet.gz/content" target="_blank" rel="noopener noreferrer">NRT-WTG_Parked.parquet.gz</a>' data = pd.read_parquet(relative_file_path ) <br><br>Once the dataframe has been imported, the users can process/re-arrange the raw data according the their needs; it should be noted that the imported dataframe contains NAN values - these are caused by the different sampling rates of the provided signals. </pre>
Steady-state operation dataset of an experimental Wet Cooling Tower pilot plant located at Plataforma Solar de Almería
<p>Repository that contains experimental data obtained from a Wet Cooling Tower (WCT) plant located at <a href="https://www.psa.es/es/index.php">Plataforma Solar de Almería</a>.</p> <p>For the article "Wet cooling tower performance prediction in CSP plants: A comparison between artificial neural networks and Poppe’s model", three experimental campaigns were used, quoting from the article:</p> <blockquote> <p>A total of 132 steady-state experimental points have been obtained thanks to the thorough experimentation conducted. These data cover a large variety of ambient conditions (different seasons, days and nights) and thermal loads (from 27 kW to 207 kW). </p> </blockquote> <p> </p> <p>See <code>README.md</code> for a more detailed description and instructions on how to use the data.</p> <h2><br>License</h2> <p><a href="https://creativecommons.org/licenses/by/4.0/">CC BY 4.0. Attribution 4.0 International</a></p> <p>If the data is used as part of a scientific publication, please cite the source publication:</p> <div> <div>Serrano, Juan Miguel, Pedro Navarro, Javier Ruiz, Patricia Palenzuela, Manuel Lucas, and Lidia Roca. “Wet Cooling Tower Performance Prediction in CSP Plants: A Comparison between Artificial Neural Networks and Poppe’s Model.” <em>Energy</em> 303 (September 15, 2024): 131844. <a href="https://doi.org/10.1016/j.energy.2024.131844">https://doi.org/10.1016/j.energy.2024.131844</a>.</div> </div>
Trajectory Design for Proximity Operations: The Relative Orbital Elements' Perspective
<p>The data sets provided here can be used to recreate the plots of the paper “Trajectory Design for Proximity Operations: The Relative Orbital Elements’ Perspective” available at this <a href="https://arc.aiaa.org/doi/full/10.2514/1.G006175">link</a>.</p> <p>That paper presents how to rigorously transform back-and-forth the equations of the relative motion in the close-range regime between Hill-Clohessy-Wiltshire and Relative Orbital Elements formulations. As straightforward application, it is presented a methodology to generate piecewise constant acceleration profiles from an impulsive guidance solution, setting up a control grid that minimizes the difference between impulsive and equivalent delta-v burns corresponding to the acceleration profile.</p> <p>Applications are implementation of autonomous guidance and control policies for close-range satellite proximity operations.</p>
Operational data from the Luleå demosite in WEDISTRICT
<p>The Luleå demosite within the EU funded project WEDISTRICT with H2020 grant agreement ID: 857801. The demosite deployed solid oxide fuel cells to provide on-site power to an immersion liquid cooled micro data center and heat for the adjacent building. The fuel used for the demosite was automotive quality biogas that was stored under high pressure on sight. This data provides the electrical meters, the weather data, thermal meters, the server behaviour, fuel cell operational data and the heat recovered by the heating network over an operation period from 11th January 2023 to 16th June 2023 on the RISE, Lulea site in the north of Sweden.</p>
Artificial Intelligence for Quality Control of manufacturing operations: Macro-mechanical milling in the Pilot Line GAMHE 5.0.
<p>Quality is defined as the extent to which a product conforms to the design specifications and how it complies with the requirements of component functionality. For some industries, such as automotive and aeronautical, the quality of their parts is very important given the high requirements to which they are subject. However, difficulties arise from the fact that a measure of quality can only be evaluated ‘‘out-of-process”, resulting in losses because there is no alternative to removing defective parts from the production line. Therefore, it is necessary to apply Artificial Intelligence-based kits/solutions that provide in-process estimation to predict quality from some measured variables. </p> <p>The main goal of these datasets is to monitor the final quality of the manufactured components or parts by estimating surface roughness from vibration signals and cutting parameters information using Artificial Intelligence-based solutions. Surface roughness is an essential feature in quality control defined by the deviation in the direction of the normal vector of a real surface from its ideal form. Because the roughness measurement is an offline and post process procedure, being able to estimate this value online brings a series of benefits in terms of time and cost reduction in manufacturing lines, energy efficiency, unnecessary wear of tools and machines, etc. Once a part has been detected with a surface quality below what is desired, a series of corrective measures can be applied for the following operations, such as: reducing the feed rate percentage, increasing the percentage of spindle speed or reducing the axial depth per pass, etc.</p>
RemoTeC full-physics retrieval GOSAT/TANSO-FTS Level 2 bias-corrected XCO2 version 2.4.0 operated at Heidelberg University
<p>The data set contains bias-corrected column averaged dry air mole fractions (XCO2) retrieved with the RemoTeCv2.4.0 full-physics algorithm (Butz et al. 2011, Guerlet et al. 2013) applied on GOSAT TANSO-FTS Level 1B (L1B) data from 2009-04-18 to 2019-06-30. The GOSAT TANSO-FTS L1B data product is produced by JAXA/NOIES/MOE and provided by ESA. The XCO2 data together with related variables are aggregated as daily files, only good quality retrievals are included.</p> <p> </p> <p>If the data is used for publications, please contact andre.butz@uni-heidelberg.de to discuss potential co-authorship and technical details.</p> <p>To cite the data in publications:</p> <p>André Butz (2019), RemoTeC full-physics retrieval GOSAT/TANSO-FTS Level 2 bias-corrected XCO2 version 2.4.0, Institute of Environmental Physics, Heidelberg University, Heidelberg, Germany, Accessed: [Date], 10.5281/zenodo.5886662</p> <p> </p> <p>Summary:</p> <p>Shortname: REMOTEC_L2_CO2_GOSAT</p> <p>Longname: RemoTeC full-physics retrieval GOSAT/TANSO-FTS Level 2 bias-corrected XCO2 version 2.4.0</p> <p>DOI: 10.5281/zenodo.5886662</p> <p>Version: 2.4.0</p> <p>Format: netCDF</p> <p>Spatial Coverage: -180.0,-90.0,180.0,90.0</p> <p>Temporal Coverage: 2009-04-18 to 2019-06-30</p>
Artificial Intelligence for quality control in manufacturing operations: Micro-mechanical milling in the Pilot Line GAMHE 5.0
<p>Quality is defined as the extent to which a product conforms to the design specifications and how it complies with the requirements of component functionality. For some industries, such as automotive and aeronautical, the quality of of manufactured parts is very important due to the high requirements. However, difficulties arise from the fact that a measure of quality can only be evaluated ‘‘out-of-process”, resulting in losses because there is no alternative to removing defective parts from the production line. Therefore, it is necessary to incorporate AI-based kits/solutions that provide in-process estimation to predict quality from some measured variables.</p> <p>The main goal of these datasets is to enable monitoring of final quality of the manufactured components or parts by estimating surface roughness from vibration signals and cutting parameters information. Surface roughness is an essential feature in quality control defined by the deviation in the direction of the normal vector of a real surface from its ideal form. Because the roughness measurement is an offline and post process procedure, being able to estimate this value online brings a series of benefits in terms of time and cost reduction in manufacturing lines, energy efficiency, unnecessary wear of tools and machines, etc. Once a part has been detected with a surface quality below what is desired, a series of corrective measures can be applied for the following operations, such as: reducing the feed rate percentage, increasing the percentage of spindle speed or reducing the axial depth per pass, etc.</p> <p>Workstation 4 (WS4) of the GAMHE 5.0 pilot line is a Kern Evo high-precision machining centre, with a maximum spindle speed of 50 000 rpm and Blum laser system and is used to run micro-milling and micro-drilling operations. In this experimental dataset, five cutting parameters were considered in the processes: spindle speed, <em>n</em>; feed rate, <em>f</em>; and axial depth of cut, <em>a<sub>P</sub></em>. The radial depth of cut, <em>a<sub>e</sub></em>; was equal to the mill tool radius, <em>r</em>, in all of the slots.</p> <p>These experiments were micro-milling operations with 0.3 mm, 0.5 mm, 0.8 mm and 1 mm-diameter mills on a sintered tungsten-copper alloy (W78Cu22). The data collected for each micro milling operation was the rms and peak value of the vibrations in the three-machine axis. In addition, five cutting parameters were also collected: position in <em>X</em> of the last point of the sample, feed rate, spindle speed, tool radius and axial depth.</p>
Costal operating wind farms: two datasets with concurrent SCADA, LiDAR and turbulent fluxes
<p>This data collection consists of two datasets from a micrometeorological experiment conducted in two distinct operating wind farms in a coastal area of the northeast region of Brazil, called Pedra do Sal Wind Farm (UEPS) and Beberibe Wind Farm (UEBB). These wind farms are located on the northeast coast of Brazil where meteorological conditions are strongly influenced by trade winds and sea breeze. Both datasets represent a full-year of measurements from August/2013 to July/2014.</p> <p>On both operating wind farms it was commissioned a fully instrumented IEC-compliant 100m met mast, with five levels of first-class calibrated cup anemometers and one level (100m) with 3D sonic anemometer. Additionally at UEPS there's an extra 3D sonic at 20m height on the met mast, as well as a VAISALA LEOSPHERE Windcube8 doppler wind lidar with a range up to 500m height and located 2.5D upwind of one of the wind turbines.</p> <p>The Pedra do Sal wind farm (UEPS) has an installed capacity of 18MW, with 20 Enercon E-44 installed at 55m a.g.l. At Beberibe wind farm (UEBB) there are 32 Enercon E-48 wind turbines installed at 75m a.g.l. The dataset includes 10min SCADA data for all wind turbines on both wind farms.</p> <p>This dataset has a high-quality combination of meteorological, SCADA and turbulent flux data of two operating wind farms in Brazil. During a full-year of measurements both datasets had a high data recovery rate (see attached tables). The dataset has already been used to assess the impact of atmospheric stability on the wind farm performance, as well as the effect of mesoscale patterns on the wind profile and wind farm power production. Recirculation of the sea breeze and the development of an internal boundary layer upwind the wind turbines were also characterized.</p> <p>For more details on the experimental layout, wind turbine locations, meso and microcale wind conditions and any other information not stated in the NetCDF4 files, please refer to the reference material or contact one of the authors.</p> <p> </p>
Metabarcoding data (number of reads per operational taxonomic unit) from a monitoring study of sandy beach meiofauna before and after sand nourishment (Ahrenshoop, Baltic Sea)
<p>We provide metabarcoding data (number of reads per operational taxonomic unit, OTU) determined from sediment samples collected on the sandy-beach water line of Ahrenshoop (Baltic Sea). Five sampling stations lay within the zone impacted by the sand nourishment between the boundary of the nature reserve in the north east and a site just north of the breakwater (AH01–AH05). An unaffected reference station was located south of Ahrenshoop (close to Niehagen) at the end of the road Pappelallee (PAP). Samples were collected at four dates. The first sampling was carried out before the sand nourishment took place (T0: 14 and 16 September 2021). Three samplings were realised after the impact: T1 (23 March 2022), T2 (27 September 2022), and T3 (28 March 2023). Latitude and longitude of each sampling location per station were recorded at each sampling date using a hand-held GPS application on a mobile phone. At the stations sampling locations varied over time. Prior to the sand nourishment the beach was narrow due to sand erosion in previous years. After the nourishment the additional extent of the beach was approximately 40 m at sampling date T1. Subsequently, progressive sand erosion forced the sampling locations (situated at the water line) further inland at T2 and T3.<br>Samples were taken from the beach-water interface (water line) in the middle of the area between two groynes. Plexiglass cores (inner core diameter 5.4 cm) were inserted vertically into the sediment down to 15 cm depth. Each core was sliced in 5 cm-layers (0–5, 5–10 and 10–15 cm). Sediment horizons were preserved in 96–99% ethanol. <br>Three cores (2 cores at T0) per sampling date were taken for metabarcoding analyses. The organisms were extracted by decantation over a 32-μm sieve. Genomic DNA was extracted from the filters using the DNeasy PowerSoil pro kit (Qiagen). Realtime-PCR was performed to amplify V1&V2, two hypervariable regions of 18S rDNA gene. The sequencing run was performed using the MiSeq Reagent Nanokit v2 (250 cycles paired end) on an Illumina MiSeq platform at the DZMB Metabarcoding lab in Wilhelmshaven, Germany. High-resolution amplicon sequence variants (ASVs) were obtained and compared to the NCBI database to assign taxonomic information to each ASV. The target meiofauna ASVs were further classified into operational taxonomic units (OTUs) with a 3% cut-off threshold using the statistical software R.</p> <p>Here, we present two Tables (as xlsx and tab-delimited files):<br>(1) the taxonomic description of the 843 OTUs and their assigned ID number;<br>(2) the number of reads per OTU per sample (including metadata for each sample: event; date; latitude; longitude; station, core and sample ID; sediment depth).</p> <p>The metabarcoding data are part of a larger ecological study on the influence of sand nourishment on meiofauna communities, which included grain-size and meiofauna abundances (see “related works”).</p> <p><strong>Comment: </strong>Our study is related to but not funded by the project ECAS Baltic: Strategies of ecosystem-friendly coastal protection and ecosystem-supporting coastal adaptation for the German Baltic Sea Coast <a href="https://deutsche-kuestenforschung.de/ecas-baltic.html">https://deutsche-kuestenforschung.de/ecas-baltic.html</a></p>
Kingdom of Saudi Arabia. al-Ḥasāʾ, Jabal al-Qāra (جَبَل ٱلْقَارَة). Pottery production, kiln in operation, 1970.
<p>[KSA QAR 1970.13] Kingdom of Saudi Arabia. al-Ḥasāʾ, Jabal al-Qāra. Pottery production, kiln in operation, 1970.</p>
PAsCAL WP6 Pilot 1 High-Capacity Bus Operations
<p>This dataset was collected within the context of the PAsCAL research project between June 2021 and September 2021 at the E-Bus Competence Centre premises in Livange, Luxembourg. Subject of the pilot was a Wizard of Oz experiment, which consisted of a modified high-capacity bus vehicle to simulate a Level-5 automated vehicle to the passengers, although the bus was operated and driven by a human driver, which was not visible to the participants.</p> <p>The participants experienced several malfunctions of the bus and were offered a Human-Machine-Interface (HMI), which connected them to a traffic control centre for troubleshooting. The purpose of the pilot was to evaluate whether available HMIs are able to bridge the gap to human driver support to passengers. Some of the participants were blind or partially sighted to also observe the adequacy of the solution on vulnerable travellers.</p> <p>In order to analyse the answers given to the questions, it is recommended to consult also the "PAsCAL WP6 Pilots Surveys" dataset, which contains all questions and possible answers.</p>
Experimental characterisation of the ULB semi-industrial furnace operating under MILD conditions with non-conventional fuels
<p>This data set contains:</p> <p>- Averaged temperature measurements data<br> - Species concentrations measurements in the exhausted gas<br> - Ensemble-averaged OH* and CH* radicals chemiluminescence spatially resolved intensity values</p> <p>The furnace is fired using a 20 kW capacity recuperative commercial flame/FLOX® burner (REKUMAT M150) of WS make. </p> <p>The following fuel mixtures were tested:</p> <p>- Fuel mixtures of CH4/H2<br> - Fuel mixtures of NH3/H2<br> - Fuel mixtures of CH3OCH3/CH4 and CH3OCH3/H2</p>
The role of hydrogen in heavy transport to operate within planetary boundaries
<p>Dataset associated with the publication "The role of hydrogen in heavy transport to operate within planetary boundaries" by Antonio Valente, Victor Tulus, Galán-Martín, Mark A. J. Huijbregts, and Gonzalo Guillén-Gosálbez, available at <a href="https://doi.org/10.1039/D1SE00790D">https://doi.org/10.1039/D1SE00790D</a>. The dataset includes the numeric data associated with the plots described in the main manuscript, as well as the tables presented in the main manuscript converted in a machine-readable format.</p> <p>The structure of the dataset is here elucidated sheet by sheet:</p> <ul> <li><strong>Tables</strong>: tables 3 and 4, as reported in the main manuscript, with evolution considered for the main technical parameters and the values of the parameters used in the baseline, best and worst scenario.</li> <li><strong>Plots</strong>: numerical values associated with figures 2, 3, and 4, as reported in the main manuscript.</li> </ul>
Carbon emissions and economic assessment of farm operations under different tillage practices in organic rainfed almond orchards under semiarid Mediterranean conditions
<p>This dataset corresponds to yield, price and fuel consumption from organic rainfed almond orchards in SE Spain under different diversification and tillage practices. The objective is to carry out an integrated environmental (focused on the CO<sub>2</sub> emissions) and economic assessment of farm operations under different diversification and tillage practices through a cradle-to-farm gate life cycle assessment (LCA) based on these data.</p> <p>These data correspond to the open-access article " Carbon emissions and economic assessment of farm operations under different tillage practices in organic rainfed almond orchards under semiarid Mediterranean conditions" published in Scientia Horticulturae. (https://doi.org/10.1016/j.scienta.2019.108978), funded by the European Commission Horizon 2020 project Diverfarming [grant agreement 728003].</p>
Operation of a multijunction solar cell
<p>Este vídeo ilustra el proceso de absorción de fotones en una célula solar multiunión. En particular, el caso que se ilustra es el de una célula formada por tres uniones cada una de ellas representada por un gap diferente. La luz del Sol está compuesta por fotones de diferentes energías representados en el vídeo por diferentes colores. En la animación observaremos la acción de fotones de 3 colores: azul (con una longitud de onda de unos 380-475 nm), verde (~500-550 nm) y rojo (~645-700 nm). En la representación de los diagramas de bandas correspondientes a cada célula vemos que el fotón más energético (de color azul) es absorbido en la primera célula. Esto es debido a que su energía es igual o mayor al valor de energía del gap de semiconductor correspondiente a la primera célula. Vemos, sin embargo, que los menos energéticos (verde y rojo) la atraviesan sin verse afectados. Esto pasará de nuevo en la siguiente capa, absorbiéndose el verde en esta ocasión. Por último, el rojo será absorbido en la capa final. Cuando un fotón es absorbido, su energía se emplea en excitar un electrón (de color amarillo en la animación) de la banda de valencia a la banda de conducción. Deja atrás una vacante o hueco (de color negro). Es decir, se genera un par electrón-hueco.</p> <p>(Este vídeo es parte de un trabajo de la asignatura de Materiales Funcionales II del Grado de Materiales de la Universidad Politécnica de Madrid del curso 2019-2020 y forma parte de un proyecto para la experimentación en la diseminación en acceso abierto de la docencia en energía solar fotovoltaica del proyecto GRECO).</p> <p> </p> <p> </p> <p>This video illustrates the photon absorption process in a multi-junction solar cell. In particular, the case illustrated is that of a cell formed by three junctions, each one represented by a different gap. Sunlight is made up of photons of different energies represented in the video by different colors. In the animation we observe the action of three coloured photons: blue (with a wavelength of about 380-475 nm), green (~ 500-550 nm) and red (~ 645-700 nm). In the representation of the band diagrams corresponding to each cell we see that the most energetic photon (blue in color) is absorbed in the first cell. This is because its energy is equal to or greater than the energy value of the semiconductor gap corresponding to the first cell. We see, however, that the less energetic ones (green and red) pass through it unaffected. This will happen again in the next layer, absorbing the green this time. Finally, the red will be absorbed in the final layer. When a photon is absorbed, its energy is used to excite an electron (yellow in animation) from the valence band to the conduction band and leaving behind a vacancy or hole (black). That is, an electron-hole pair is generated.</p> <p>(This video is part of a work of the Functional Materials II subject of the Materials Degree of the Universidad Politécnica de Madrid for the 2019-2020 academic year and is part of a project for experimentation in the open access dissemination of energy teaching photovoltaic solar from the GRECO project).</p>
Operation of a three terminal solar cell for children
<p>The video describes in a simple manner the operation of a three terminal solar cell. Blue arrows represent the high energy photons. Red arrows represent the low energy photons, that are absorbed deeper in the cell. Each colored square represents a semiconductor layer. White balls, represent electrons. Black ball represent holes. For a more detailed description of a particular kind of three terminal solar cell, see for example:</p> <p> A. Martí and A. Luque, “Three-terminal heterojunction bipolar transistor solar cell for high-efficiency photovoltaic conversion,” <em>Nat. Commun.</em>, vol. 6, pp. 6902–6902, Apr. 2015. (<a href="https://doi.org/10.1038/ncomms7902">https://doi.org/10.1038/ncomms7902</a>)</p> <p>The video has been created in Blender 2.82. (<a href="https://www.blender.org/">https://www.blender.org/</a>). Both the video and the source file with which we created it are attached</p>
Organisation for Economic Co-operation and Development (OECD) data for Antalya (Turkey), Antwerp (Belgium), Cork (Ireland), Thessaloniki (Greece) (source: OECD)
<p>The data have been collected via the official OECD Application Programming Interface (API)<strong> </strong>and<strong> </strong>includes the following indicators:</p> <ul> <li>EmpPlaRes - Employment at place of residence</li> <li>LfPartRa - Labour Force and Participation rate</li> <li>UnemReg - Unemployment in regions </li> <li>RegGdpTL2 - Regional Gross Domestic Product (Large regions TL2)</li> <li>GDPLT3 - Gross Domestic Product (Small regions TL3)</li> <li>RegEmIndu - Regional Employment by industry (ISIC rev 4)</li> <li>RegGVAWorker - Regional GVA per worker</li> <li>RegIncPC - Regional income per capita</li> </ul> <p>Source: https://data.oecd.org/api/</p>
Higher-Mode Contact Resonance Operation of a High-Aspect- Ratio Piezoresistive Cantilever Microprobe (Data)
<p>Raw data, Ansys Workbench Projects and figures used for the article "Higher-Mode Contact Resonance Operation of a High-Aspect- Ratio Piezoresistive Cantilever Microprobe", published in the proceedings of SMSI 2020, which did not take place because of Covid-19 virus pandemic.</p> <p>The data can be opened by a text editor<br> Ansys projects are compressed using 7-Zip and can be opened by Ansys Workbench.</p>
Self-Assessment Questions - Operating Systems and Computer Networks
<p><strong>What does the dataset contain?</strong><br> The dataset contains a list of XML files and JPG images. The XML files contain a description of a certain type of self-assessment questions to be load and processed by a plugin called <em>qtype_selfassess</em> [1] for the Moodle learning management system.</p> <p>The XML files were names as follow:</p> <pre><code><number of course unit>-<question-ID>-selfassess-<short name of the qestion>.xml</code></pre> <p>The file unit_1-262-selfassess-Caching.xml for instance, is about a self-assessment question of the first course unit ("unit_1") that has the ID 263, and is about the topic "Caching". Most of the short names are in German since the content of the files is German as well.<br> The JPG files are referenced in the XML files.</p> <p><strong>What is the purpose and origin of the data?</strong><br> In order to give students the chance of iterative improvement, the SelfAssess-plugin [1], that allows students to create and assess solutions unlimited times, was implemented in Moodle. Students can open a question to start work. The plugin shows the question and asks the student to create and upload a solution. Solutions may be uploaded as image (e.g. photo, scan) or PDF file. Thereafter, the plugin presents a list of instructor-defined assessment criteria and a link to the sample solution, and asks to assess the uploaded solution. The plugin then presents feedback to the students based on their self-assessment. For this purpose, instructors defined an error tree for each question that maps typical errors to detect one or a combination of not considered criteria on one feedback text. Feedback texts help the student to improve their solution, e.g. by providing learning goal feedback (such as misconceived concepts) and learning process feedback (such as links to relevant resources, things to improve, or activities to do), until they self-assess their solution as correct or as good enough. After receiving the feedback, students could either improve their solution by performing a new iteration of the process (create, upload, self-assess the improved solution again, receive feedback, and take or decline another iteration) or finish the exercise.</p> <p>For the mentioned plugin 43 self-assessment questions including assessment criteria and feedback have been created for fundamental computer science course about operating systems and computer networks. The course was offered at FernUniversität in Hagen, Germany, in winter term 2019/20 and 2020/21 by Professor Dr. Jörg M. Haake.</p> <p>Further information about the plugin and the proposed self-assessment question type can be found in [2] and [3].</p> <p><strong>References</strong><br> [1] Steinkohl, K., Burchart, M., Haake, J.M., Seidel, N. (2020). SelfAssess Question Type Plugin for<br> Moodle. https://github.com/D2L2/qtype_selfassess<br> [2] Haake, J. M.; Seidel, N.; Karolyi, H.; Ma, L.: Self-Assessment mit High-Information Feedback. DELFI 2020–Die 18. Fachtagung Bildungstechnologien der Gesellschaft für Informatik e.V., 2020.<br> [3] Haake, J. M., Seidel, N., Karolyi, H., & Burchart, M. (2021). Accuracy of self-assessments in higher education. In DELFI 2020 – Die 19. Fachtagung Bildungstechnologien der Gesellschaft für Informatik e.V. Bonn.</p> <p> </p> <p><strong>Acknowledgments.</strong></p> <p>This research was supported by the Research Cluster "Digitalization, Diversity and Lifelong Learning – Consequences for Higher Education" (D2L2) of the FernUniversität in Hagen, Germany.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.