Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
50
datasets available to search
ShareScore release 0.9.0
Dataset results
50 results for “source code modeling”
Modified WRF/Chem source code, output data, and post-processing scripts for the GMD manuscript "Evaluation of WRF/Chem model (v3.9.1.1) real-time air quality forecasts over the Eastern Mediterranean"
<p>Here you will find the modified WRF/Chem code used in the simulations, the scripts used for post-processing and the model output data used in the manuscript. </p> <p>Two modifications have been made in module_aerosols_soa_vbs.F:</p> <ol> <li>ch_dust is set to1.0D-9*0.36</li> <li>The model is set not to initialize during restarts</li> </ol> <p>The model data directory includes:</p> <ol> <li>Two csv files (Winter and Summer) with the hourly concentrations of atmospheric pollutants at the locations of the ground stations. These data were used to produce Figures 4-8 in the manuscript as well as all the metrics.</li> <li>Two netcdf files (Winter and Summer) with the average ground concentrations of atmospheric pollutants over Cyprus. These data were use to produce Figure 3 in the manuscript. </li> </ol>
Personalized in silico model for radiation-induced pulmonary fibrosis | (source code, simulation input+output data)
<p>This repository concerns the supplementary material data of the research article entitled "<em>Personalised in silico model for radiation-induced pulmonary fibrosis</em>" that is published in the Royal Society Interface journal (rsif.royalsocietypublishing.org). More specifically, the repository contains the source code of the radiation-induced pulmonary fibrosis simulator, the results produced from the medical image analysis of this study (CT scans and RT dosage maps) for each patient case, the input files necessary to run the simulator and the corresponding output produced respectively. Each patient ID corresponds to each case documented in the research article.</p>
Supplementary data and code to article "Single-Well Microseismic Focal Mechanism Inversions Using Different Source Models: A Case Study in the Ordos Basin, China"
<p>Supplementary data and code to article "Single-Well Microseismic Focal Mechanism Inversions Using Different Source Models: A Case Study in the Ordos Basin, China".</p><p>Transformations among the parameters of the moment tensor model refer to the code package from Tape and Tape (https://github.com/carltape/mtbeach/; https://github.com/carltape/surfacevel2strain; Tape and Tape, 2009, 2012, 2013, 2015).</p><p>Tape, C., P. Muse, M. Simons, D. Dong, and F. Webb (2009). Multiscale estimation of GPS velocity fields, Geophys. J. Int. 179, no.2, 945-971, doi: 10.1111/j.1365-246X.2009.04337.x.</p><p>Tape, W., and C. Tape (2012). A geometric setting for moment tensors, Geophys. J. Int. 190, no. 1, 476–498, doi: 10.1111/j.1365-246X.2012.05491.x.</p><p>Tape, W., and C. Tape (2013). The classical model for moment tensors, Geophys. J. Int. 195, no. 3, 1701–1720, doi: 10.1093/gji/ggt302.</p><p>Tape, W., and C. Tape (2015). A uniform parametrization of moment tensors, Geophys. J. Int. 202, no. 3, 2074–2081, doi: 10.1093/gji/ggv262.</p>
Source Code—Motorized chain models of the ideal chromosome
<p>Code and data for reproducing the findings in "Motorized chain models of the ideal chromosome" by Zhiyu Cao & Peter G Wolynes</p> <p>We carried out hybrid Brownian-Gillespie simulations of the polymer dynamics for the swimming motors. The programs can run in parallel on Cuda software. We use periodic boundary conditions without considering the self-avoiding and excluded volume effect. In addition, we solve the self-consistent equation by an iterative method.</p>
Prototyping 3D Virtual Learning Environments with X3D-based Content and Visualization Tools-Figure 7. The HTML source (partial) code, integrating the X3D model
<p>To integrate the model into a web page, a model conversion to X3D format and an X3DOM output under the form of an HTML5 encoded webpage (Figure 7) were needed. Instant Reality distribution provides a command line transcoding tool, named Avalon Optimizer (aopt), that was used to convert a VRML format (wrl extension) of the model to X3D. </p>
CrossCodeBench: Benchmarking Cross-Task Generalization of Source Code Models
<p>The raw datasets and tasks of the paper "CrossCodeBench: Benchmarking Cross-Task Generalization of Source Code Models". Source code is available at https://anonymous.4open.science/r/CrossCodeBench-C538/.</p>
An Empirical Comparison of Pre-Trained Models of Source Code
<p>The replication package of the paper "An Empirical Comparison of Pre-Trained Models of Source Code". For the source code, please refer to <a href="https://github.com/NougatCA/FineTuner">https://github.com/NougatCA/FineTuner</a>.</p>
CPT-1 pre-computed whole-proteome variant effect predictions and model source code
<p><strong>Cross-protein transfer learning for variant effect prediction</strong></p><p>This repository contains the variant effect predictions of CPT-1 for 18,602 human proteins, initially released with the manuscript "Cross-protein transfer learning substantially improves zero-shot prediction of disease variant effects". The proteins are split into three files.</p><p><i>CPT1_score_EVE_set.zip</i>: Proteins in the EVE set (<a href="https://www.nature.com/articles/s41586-021-04043-8">Frazer et al., 2021</a>)</p><p><i>CPT1_score_no_EVE_set_1.zip</i> & <i>CPT1_score_no_EVE_set_2.zip</i>: Proteins not in the EVE set. Predictions for these proteins use imputed values for features depending on the EVE MSA.</p><p>The protein names are UniProt gene names.</p><p>We also provide source code to train CPT-1 model and reproduce results in the manuscript :</p><p><i>source_code.zip </i>(corresponds to GitHub repository songlab-cal/CPT version as of Jul 12, 2023)</p><p> </p><p><strong>Citation</strong></p><p>Jagota, M.*, Ye, C.*, Albors, C., Rastogi, R., Koehl, A., Ioannidis, N., and Song, Y.S.†<br>"Cross-protein transfer learning substantially improves zero-shot prediction of disease variant effects", bioRxiv (2022)</p><p>*These authors contributed equally to this work.<br>†To whom correspondence should be addressed: <a href="mailto:yss@berkeley.edu">yss@berkeley.edu</a></p><p>DOI: <a href="https://doi.org/10.1101/2022.11.15.516532">https://doi.org/10.1101/2022.11.15.516532</a></p><p> </p>
Models and post-processing codes for paper "Quantitative stratigraphic analysis in a source-to-sink numerical framework"
<p>This package contains all the files required to reproduce the experiments in the manuscript: <strong>Quantitative stratigraphic analysis in a source-to-sink numerical framework</strong>.</p>
Source code for models of floral initiation in pea and gene expression data extracted from published sources
<p>The dataset contains the source code for computational models of a gene network controlling transition to flowering in pea (<em>Pisum sativum</em>). The models were based on ordinary differential equations (ODE) or neural networks. It also includes data on the expression dynamics of genes involved in the network, which was used for model fitting. The expression data was extracted from the following papers: </p> <p>Hecht, V., Laurie, R. E., Schoor, K. Vander, Ridge, S., Knowles, C. L., Liew, L. C., Sussmilch, F. C., et al. (2011). The Pea GIGAS Gene Is a FLOWERING LOCUS T Homolog Necessary for Graft-Transmissible Specification of Flowering but Not for Responsiveness to Photoperiod. 23, 147–161. doi:10.1105/tpc.110.081042</p> <p>Sussmilch, F. C., Berbel, A., Hecht, V., Schoor, K. Vander, Ferrándiz, C., Madueño, F., et al. (2015). Pea VEGETATIVE2 Is an FD Homolog That Is Essential for Flowering and Compound In fl orescence Development. 27, 1046–1060. doi:10.1105/tpc.115.136150</p> <p>The source code of the DEEP software used for parameter optimization in the model fitting can be found in the Gitlab repository (https://gitlab.com/mackoel/deepmethod/-/tree/master).</p> <p>The files are the supplement to the following manuscript, submitted to Frontiers in Genetics:</p> <p>"Dynamical Modeling of the Core Gene Network Controlling Transition to Flowering in <em>Pisum sativum</em>" by Polina Pavlinova, Maria G. Samsonova, and Vitaly V. Gursky.</p> <p>All possible questions can be sent to: Polina Pavlinova (polina.pavlina1004@gmail.com), Vitaly Gursky (gursky@math.ioffe.ru).</p>
Dataset and source code for ICSME2017 paper "Supervised vs Unsupervised Models: A Holistic Look at Effort-Aware Just-in-Time Defect Prediction"
<p>Dataset and source code for ICSME2017 paper “Supervised vs Unsupervised Models: A Holistic Look at Effort-Aware Just-in-Time Defect Prediction”</p> <p>There are four different models in the paper (i.e., EALR, LT, CBS and OneWay). Each model was implemented in a single Java file in the model package. To reproduce the experiment results of each model in the paper, just run the main method in the corresponding Java file. </p> <p> </p>
Scenario data, model source code and plotting routine for manuscript: Separating CO2 emission from removal targets comes with limited cost impacts
<p>This data archive contains REMIND model setup, results data and data analysis files for manuscript:<br><strong>Separating CO2 emission reduction from removal targets comes with limited cost impact.<br><br>plotting</strong>(directory) contains results data, manuscript specific data analysis and plotting routine scripts used to generate the figures of the manuscript.<br><strong>remind</strong>(directory) contains REMIND model source code and scenario set-up. Detailed scenario configurations are set in remind/config/scenario_config_SepMark.csv.<br><strong>remind2</strong>(directory) contains the slightly modified R-library package used for post-processing of REMIND output.<br><br>AMENDMENT<br><strong>Plots_SeparateMarkets_afterReviewProcess.Rmd</strong> After the review process, the new plotting script was added including the additional figures in the Supplementary Material. This file should replace the previous R-markdown file SepMark_essential/plotting/Plots_SeparateMarkets.Rmd.</p>
Dataset and source code for "Explanation and optimizing multi-model blending algorithm using random variables theory"
<p>this dataset contain: </p> <ol> <li>2m temperature de-biased model forecast data on station location, ECMWF, NCEP, JP and CMA</li> <li>2m temperature observaton data, obs_t2m</li> <li>24H QPF model forecast data on station location, ECMWF, NCEP, CMA-GFS, in raw_data_r24.zip</li> <li>24H precipitation data, in raw_data_r24.zip</li> <li>source code (in python)</li> </ol> <p> </p> <p>how to use it: </p> <p>1. prepare data and python environment<br> 1.1 if you want to run [Station_FCST_MMWB.py] or [Station_FCST_MMWB_r24.py] , please download the station forecast and observation data<br> 1.2 neet meteva package to read/write micaps-3 format data: https://github.com/nmcdev/meteva<br> 1.3 need cartopy to draw picture FigS01. </p> <p>2. try the 2m temperature blending methods <optional><br> 2.1 unzip the [CMA.zip, ECMWF.zip, jp.zip, NCEP.zip, obs_t2m.zip] file into ./raw_data/<br> 2.2 run the Station_FCST_MMWB.py in python environment </p> <p>3. try the 24h QPF multi blending methods <optional><br> 3.1 unzip the [raw_data_r24.zip] file into ./raw_data_r24/<br> 3.2 run the Station_FCST_MMWB_r24.py in python environment</p> <p>4. draw figures<br> 4.1 run Fig01.py in python environment <br> 4.2 run Fig02.py in python environment <br> 4.3 run Fig03.py in python environment <br> 4.4 run FigA01.py in python environment <br> 4.5 run FigS01.py in python environment </p>
Source code for dynamic models and simulations of mate sampling behavior
<p>Theory predicts that the strength of sexual selection (i.e., how well a trait predicts mating or fertilization success) should increase with population density, yet empirical support remains mixed. We explore how this discrepancy might reflect a disconnect between current theory and our understanding of the strategies individuals use to choose mates. We demonstrate that the density-dependence of sexual selection predicted by previous theory arises from the assumption that individuals automatically sample more potential mates at higher densities. We provide an updated theoretical framework for the density-dependence of sexual selection by (1) developing models that clarify the mechanisms through which density-dependent mate sampling strategies might be favored by selection and (2) using simulations to determine how sexual selection changes with population density when individuals use those strategies. We find that sexual selection may increase strongly with density if sampling strategies change adaptively in response to density-dependent sampling costs, whereas within-individual plasticity in sampling over time (e.g., due to adaptation to increasing sampling costs as the breeding season progresses) produces weaker density-dependent sexual selection. Our findings suggest that density-dependence of sexual selection depends on the ecological context in which mate sampling has evolved.</p>
LaMEM source code and input files corresponding to Present‐day upper‐mantle architecture of the Alps: Insights from data‐driven dynamic modelling
<p>This repository contains LaMEM source code and input files for the models presented in Kumar, A., Cacace, M., Scheck-Wenderoth, M., Götze, H.-J., & Kaus, B. J. P. (2022). Present-day upper-mantle architecture of the Alps: Insights from data-driven dynamic modeling. Geophysical Research Letters, 49, e2022GL099476. https://doi. org/10.1029/2022GL099476</p>
Polytopic autoencoders for very low-dimensional parametrizations of fluid flow models [source code]
<p>J. Heiland & Y. Kim, 'Polytopic autoencoders for very low-dimensional parametrizations of fluid flow models', GAMM 2024</p>
Enhancing Climate Model Performance through Improving Volcanic Aerosol Representation Dataset and model source codes
<p>Enhancing Climate Model Performance through Improving Volcanic Aerosol Representation: Dataset and codes used in the study</p> <p> </p>
Data and Source Codes used in "Development of a Global Quasi-3-D Multiscale Modeling Framework: I. Vector Vorticity Model on Cubed Sphere as Cloud-Resolving Component"
<p>Data and Source Codes used in the paper "Development of a Global Quasi-3-D Multiscale Modeling Framework: I. Vector Vorticity Model on Cubed Sphere as Cloud-Resolving Component"</p> <p>Advection Test (ADV): East-West A_TST (100km, Cube), C_TST (25km, Cube), E_TST (5km, Cube),</p> <p> North-South K_TST (100km, Cube), M_TST (25km, Cube), O_TST (5km, Cube) </p> <p>Barotropic Test (BAR): A_TST5 (100km, Cube), Y_TST4 (100km, RLL), C_TST3 (5km, Cube), C_TST1 (5km, RLL)</p> <p>Baroclinic Test (BCL): J_TST30 (100km, Cube), J_TST20 (100km, RLL)</p>
Model source code, modified model code, and all scripts of the paper "A comprehensive estimate of the anthropogenic aerosol radiative effects using the GAMIL model with reduced complexity".
<p>Model source code, modified model code, and all scripts of the paper "A comprehensive estimate of the anthropogenic aerosol radiative effects using the GAMIL model with reduced complexity".</p>
Model source code, simulation results, and all scripts for the paper "A comprehensive estimate of the anthropogenic aerosol radiative effects using the GAMIL model with reduced complexity".
<p>FigureTable_Scripts.rar is NCL scripts used for figures and tables. <br> Model_Scripts.rar is the modified model code and scripts used for running model.<br> models.rar is the GAMIL model source code.<br> ModelResults.rar is the model results. Note that only the variables used for making plots.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.