Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
4
datasets available to search
ShareScore release 0.9.0
Dataset results
4 results for “strain rate sensitivity”
Data publication supplementing "Novel nanoindentation strain rate sweep method for continuously investigating the strain rate sensitivity of materials at the nanoscale"
<p>This data publication contains the results of nanoindentation tests on Fused silica, nanocrystalline nickel, a nanocrystalline FeCr alloy, a bulk metallic glass, the superplastic alloy Zn-22%Al and single crystalline aluminum as well as the method files developed for the G200 nanoindenter. It supplements the publication "Novel nanoindentation strain rate sweep method for continuously investigating the strain rate sensitivity of materials at the nanoscale". The materials are described in more detail in the respective publication. The data publication takes over the sample naming convention from the related publication. </p><p>Nanoindentation measurement were performed by H. Holz at the Max-Planck Institut für Eisenforschung GmbH, Max-Planck-Straße 1, 40237 Düsseldorf, Germany using a G200 nanoindenter (KLA, Milpitas, CA, USA), equipped with a modified Berkovich diamond indenter tip of the type 171-561-500 with a serial number of C-0040446 from Synton MDP (Nidau, Switzerland). Constant strain rate tests, strain rate jump tests, strain rate sweep tests and strain rate sweep reversal tests were performed on each material in Continuous Stiffness Measurement (CSM) mode. The maximum indentation depth was 2200 nm, the CSM amplitude 2 nm and the CSM frequency 45 Hz. Strain rates were varied within the range 0.001 – 0.1 s-1. Further information on the test protocol can be found in the corresponding publication.</p><p>The subfolder "Nanoindentation data" contains the raw data for all valid indents as output by the NanoSuite © software v 7.1.7 and converted to the semicolon-separated format. The naming convention for the folder in which the CSV files are located in gives first the used material, then the method used with additional information to the parameters inputted for the method such as strain rate and indentation depth all separated by an underscore. An example can be "FS_CSR_01s-1" for a constant strain rate tests performed on fused silica with a strain rate target of 0.1 s-1 or "Nc-Ni_SweepReversal_005s-1_0005s-1" for a sweep reversal test performed on the nanocrystalline nickel sample with a targeted initial and ending strain rate of 0.05 s-1 and a strain rate target at which the strain rate direction gets reversed of 0.005 s-1. The CSV files are named either "Results" giving the average results of each test, "Required Inputs" giving information about the parameters used for the experiments, "Inputs Editable Post Test" giving information about the analysis parameters to obtain the results from, and "Test XXX" which include the Raw data of the corresponding test number. In each file the first row gives the data description e.g., "Time", the second row the physical unit e.g., "s" for seconds and from the third row the measured values.</p><p>The Nano Suite method files to perform the experiments on KLA G200 instruments is provided in the folder "G200 methods". The method for the strain rate sweep experiments is called "Strain Rate Sweep.msm" and the method for the strain rate sweep reversal experiments "Strain Rate Sweep Reversal.msm". This method is provided as is and shall be used at your own risk. The authors explicitly decline responsibility for any physical or immaterial damage resulting from the use of this method. Should minor issues occur, some feedback to the authors would be greatly appreciated.</p>
Strain rate sensitivity of a Cu/Al2O3 multi-layered thin film
<p>AD: as deposited</p> <p>HT: heat treated</p> <p>Samples P01-16 : ~4.0 um wide pillars</p> <p>Samples P01-09 : ~2.9 um wide pillars</p> <p>Pillar dimensions and deformation properties are included in the Excel file. The supplied mechanical data is compliance and baseline (drift) corrected.</p>
Data for "Investigation of local strain rate sensitivity in dual-phase Ti alloys by nanoindentation"
<p>Data for "Investigation of local strain rate sensitivity in dual-phaes Ti alloys by nanoindentation"</p> <p>Tea-Sung Jun1, David E.J. Armstrong2 and T. Benjamin Britton1<br /> 1. Department of Materials, Imperial College London, Prince consort Road, London, SW7 2AZ, UK<br /> 2. Department of Materials, University of Oxford, Parks Road, Oxford, OX1 3PH, UK</p> <p>--</p> <p>This nanoindentation data folder contains 3 subfolders:<br /> (1) Raw indentation data obtained from TestWorks<br /> (2) Data for Figure 4<br /> (3) Data for Figure 5</p> <p>--</p> <p>In the subfolder (1), each file name indicates Material_Grain orientation_Indentation strain rate (e.g. 6242_H_0001). <br /> For the subfolders (2) and (3), readers can plot the graphs either using Excel, OriginPro or other software. <br /> Note that we used the OriginPro to generate all the graphs in this article.</p> <p>--</p> <p>If readers need further information, please feel free to contact: t.jun@imperial.ac.uk or terryjun83@gmail.com (Tea-Sung (Terry) Jun)</p>
Data for "Local strain rate sensitivity of single α phase within a dual-phase Ti alloy"
<p>Data for "Local strain rate sensitivity of single a phase within a dual-phase Ti alloy"</p> <p>Tea-Sung Jun, Zhen Zhang, Giorgio Sernicola, Fionn P.E. Dunne and T. Benjamin Britton<br /> Department of Materials, Imperial College London, Prince consort Road, London, SW7 2AZ, UK</p> <p>--</p> <p>This micropillar compression data folder contains 6 subfolders:<br /> (1) Micropillar compression videos<br /> (2) Data for Figure 6<br /> (3) Data for Figure 7<br /> (4) Data for Figure 10<br /> (5) Data for Figure 11<br /> (6) Data for Figure 12</p> <p>--</p> <p>In the subfolder (1), each file name indicates 'Pillar name (Slip system, Strain rate)', e.g. Pillar 1 (Basal, 0.01). <br /> For the subfolders (2) ~ (6), readers can plot the graphs either using Excel, OriginPro or other software. <br /> Note that we used the OriginPro to generate all the graphs in this article.</p> <p>--</p> <p>If readers need further information, please feel free to contact: t.jun@imperial.ac.uk or terryjun83@gmail.com (Tea-Sung (Terry) Jun)</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.