Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
58
datasets available to search
ShareScore release 0.9.0
Dataset results
58 results for “temperature sensors”
Time series of high-frequency sensor data measuring water temperature, dissolved oxygen, conductivity, specific conductance, total dissolved solids, chlorophyll a, phycocyanin, turbidity, and fluorescent dissolved organic matter at discrete depths in Carvins Cove Reservoir, Virginia, USA in 2020-2025
We monitored water quality in Carvins Cove Reservoir (Roanoke, Virginia, USA; 37.3697 -79.958) with high-frequency (10-minute) sensors in 2020-2025. Carvins Cove Reservoir is owned and managed by the Western Virginia Water Authority as a primary drinking water source. This data package consists of datasets from two separate deployments. First, from July 2020 - August 2021, depth profiles of water temperature were measured on 1-meter intervals using HOBO temperature pendant loggers deployed from 0.1 m below the surface of the reservoir to 10 m depth, and also at 15 and 20 m depth. Additionally, water temperature was measured in the Sawmill Branch inflow at 0.5 m depth using HOBO temperature pendant loggers. Second, from 9 April 2021 - 31 December 2025, depth profiles of water temperature were measured on 1-meter intervals from 0.1 m below the surface of the reservoir to 11 m depth and additionally at 15 and 19 m. A YSI EXO2 sonde measured water temperature, conductivity, specific conductance, chlorophyll a, phycocyanin, total dissolved solids, dissolved oxygen, and fluorescent dissolved organic matter at ~1.5 m depth. A YSI EXO3 sonde measured water temperature, conductivity, specific conductance, total dissolved solids, dissolved oxygen, and fluorescent dissolved organic matter at ~9 m depth, which corresponds to the depth of a water outtake valve. The thermistors, EXO3 sonde, and pressure sensor were deployed at stationary, fixed elevations (referred to as positions) deployed off of the dam near the water outtake valves. Due to variable water levels in the reservoir, the depths of these sensors varied over time. In contrast, the EXO2 was deployed on a buoy from 2021-2022 and remained at 1.5 m depth as the water level fluctuated. However, in 2023, the buoy disappeared in a storm, and after that the EXO2 was deployed at a stationary elevation as the water level fluctuated around the sensor. The EXO2 was redeployed on the buoy in 2024. The monitoring site's maximum de
Continuous stream CO2 and temperature data and sensor calibration grab samples from five NEON sites (CARI, COMO, KING, MART, WALK), August 2021-April 2024.
This package contains: 1) sensor-based measurements of dissolved CO2 concentration and temperature, and 2) dissolved CO2 concentration from grab samples that were used to calibrate the sensor data, collected at five stream sites in the NEON network (CARI- Caribou Creek, AK; COMO- Como Creek, CO; KING- Kings Creek, KS; MART- Martha Creek, WA; and WALK- Walker Branch, TN) between August 2021 - April 2024. The grab sample dataset contains a combination of samples collected by NEON (DP1.20097.001) and additional samples collected by project personnel. All samples were collected using the headspace equilibration method, and dissolved CO2 concentrations were calculated using the 'neonDissGas' R package (https://github.com/NEONScience/NEON-dissolved-gas). The sensor dataset contains CO2 concentrations measured with an eosGP CO2 gas probe, averaged to 15-minute intervals and corrected to align with grab sample concentrations using a site-specific grab versus sensor regression. Due to inaccuracies in the eosGP temperature data, we instead include the temperature data from NEON that was used to convert CO2 between units of ppmv and umol/L (DP1.20053.001 for CARI, KING, MART, and WALK, and data from the multiparameter sonde for COMO). All NEON data used in this data package references the RELEASE-2025 version of each data product (downloaded February 2025).
Time series of high-frequency sensor data measuring water temperature, dissolved oxygen, pressure, conductivity, specific conductance, total dissolved solids, chlorophyll a, phycocyanin, fluorescent dissolved organic matter, and turbidity at discrete depths in Falling Creek Reservoir, Virginia, USA in 2018-2025
We monitored water quality in Falling Creek Reservoir (Vinton, Virginia, USA; 37.30325 -79.8373) with high-frequency (10-minute) sensors in 2018-2025. All variables were measured at the deepest site of the reservoir adjacent to the dam. Falling Creek Reservoir is owned and managed by the Western Virginia Water Authority as a primary drinking water source for Roanoke, Virginia. This data product consists of one dataset compiled of depth profiles of water temperature on 1-m intervals from 0.1 to 9 m depth; dissolved oxygen at 5 m and 9 m depth; pressure at 9 m depth; and temperature, dissolved oxygen, conductivity, specific conductance, chlorophyll a, phycocyanin, total dissolved solids, fluorescent dissolved organic matter, turbidity, and pressure at ~1.6 m depth. The dataset is accompanied by a sensor maintenance log and quality assurance/quality control analysis scripts.
Time series of high-frequency sensor data measuring water temperature, dissolved oxygen, conductivity, specific conductance, total dissolved solids, chlorophyll a, phycocyanin, fluorescent dissolved organic matter, and turbidity at discrete depths, and water level in Beaverdam Reservoir, Virginia, USA in 2009-2025
We monitored water level and water quality in Beaverdam Reservoir (Vinton, Virginia, USA; 37.31288, -79.8159) with visual observations and high-frequency (10- to 15-minute resolution) sensors in 2009-2025. All variables were measured at the deepest site of the reservoir adjacent to the dam. Beaverdam Reservoir is owned and managed by the Western Virginia Water Authority as a secondary drinking water source for Roanoke, Virginia. This data package is comprised of three datasets: 1) bvre-waterlevel_2009_2025.csv, 2) bvre-sensorstring_2016_2020.csv, and 3) bvre-waterquality_2020_2025.csv. 1) bvre-waterlevel_2009_2025.csv contains water level observations of the staff gauge at a platform near the reservoir's dam by both the Western Virginia Water Authority and the Virginia Tech Reservoir Group LTREB field crew. This dataset spans 2009 to 2025, with data collection still ongoing. 2) bvre-sensorstring_2016_2020.csv consists of a water temperature profile at ~1-meter intervals from the surface of the reservoir to 10.5 m below the water, complemented by intermittent data collected by a dissolved oxygen logger deployed at 5 m or 10 m. A sonde measuring water temperature, conductivity, specific conductance, chlorophyll a, phycocyanin, total dissolved solids, dissolved oxygen, fluorescent dissolved organic matter, and turbidity was additionally deployed at ~1.5 m depth. This dataset spans 2016 to 2020, with no additional data collection beyond the last observation. The third dataset is bvre-waterquality_2020_2025.csv, with data collection still ongoing and an accompanying maintenance log. This dataset contains: a) a temperature string with 13 temperature sensors deployed ~1 m apart from the surface to 0.5 m above the sediments of the reservoir; b) two dissolved oxygen sensors, one in the middle of the string and one sensor above the sediments; and c) a pressure sensor just above the sediments. The same sonde from the first 2016-2020 dataset is also included in this 2020-2025 d
Hubbard Brook Experimental Forest: Hourly Temperature Under Canopy by HOBO sensors at Valleywide Plots, 2013-2020
Air temperature at 1.5 m agl is measured at hourly intervals under the canopy at every fifth valleywide plot plus one more between watersheds 1 and 4. The sensors are maintained by bird crews and volunteers. These data were gathered as part of the Hubbard Brook Ecosystem Study (HBES). The HBES is a collaborative effort at the Hubbard Brook Experimental Forest, which is operated and maintained by the US Forest Service, Northern Research Station.
Battery-less Environment Sensor Using Thermoelectric Energy Harvesting From Soil-Ambient Air Temperature Differences
<p>The data set contains the data collected from experiments sites in Belgium ( Campus Drie Eiken, University of Antwerp, 51.161° N, 4.408° W) and Iceland ( Forhot, 64.008° N, 21.178° W) for the research and evaluation of a battery-less environment sensor powered by energy harvesting. The device uses the temperature difference between soil and air to produce energy with the help of a Thermoelectric Generator (TEG) and powers a wireless sensor node. The data set includes data collected from 2 phases of the study. One during the initial evaluation phase where we collected soil temperatures at 15 cm and air temperature to evaluate the possibilities of producing energy from the temperature differences. Using these data, we estimated the energy production capacity for both sites. Further, a proof-of-concept device was developed, and its performance was evaluated with field experiments. During this process, we collected the voltage level of the storage unit, i.e, the capacitor, air and soil temperatures and the TEG output voltage. During both phases, the same methods were employed to collect data. The voltage values were measured with a 12-bit ADC and the temperature was measured with 1-Wire temperature sensor. Further, the collected data were transferred to cloud storage in real-time for further analysis and evaluation. </p> <ul> <li><strong>cde_mseasurements_oct2020-nov2020.csv</strong> <ul> <li> Soil temperature and air temperature data from the Campus Drie Eiken at the University of Antwerp, Belgium. The data were collected from 2 Oct 2020 to 17 Nov 2020.</li> </ul> </li> <li><strong>cde_teg_measurements.csv</strong> <ul> <li>Soil temperature, ambient temperature and the open-circuit voltage of TEG from Campus Drie Eiken at the University Antwerp, Belgium from 21 Apr 2021 to 25 Apr May 2021. Also includes the difference calculated between the two temperature values.</li> </ul> </li> <li><strong>cde_energy_simulated.csv</strong> <ul> <li>Energy production capacity estimated using the temperature data collected from Campus Drie Eiken at the University of Antwerp.</li> </ul> </li> <li><strong>aui_measurements_nov-2021.csv</strong> <ul> <li>Soil temperature and air temperature data from the Forhot research site in Iceland for the month of November 2021.</li> </ul> </li> <li><strong>aui_teg_measurements.csv</strong> <ul> <li>Soil temperature, ambient temperature and the open-circuit voltage of TEG collected from the Forhot research site in Iceland. Also includes the difference calculated between the two temperature values. The data were collected from 18 Nov 2021 to 30 Nov 2021</li> </ul> </li> <li><strong>aui_energy_simulated.csv</strong> <ul> <li>Energy production capacity estimated using the temperature data collected from the Forhot research site in Iceland.</li> </ul> </li> <li><strong>cde_capacitor_voltage.csv</strong> <ul> <li>The voltage level of the capacitor used by the battery-less device to buffer the harvested energy. The device was deployed at the Campus Drie Eiken and the data collection was carried out from 1 Mar 2022 to 12 Apr 2022. A 15 mF supercapacitor was used. </li> </ul> </li> </ul>
Dataset for 'Room-temperature monitoring of CH4 and CO2 using a metal-organic framework-based QCM sensor showing inherent analyte discrimination'
<p>Associated data for the manuscript 'Room-temperature monitoring of CH4 and CO2 using a metal-organic framework-based QCM sensor showing inherent analyte discrimination' (doi://10.26434/chemrxiv-2023-djhp2)</p> <p> </p> <p> </p>
Time series of high-frequency sensors measuring water temperature and dissolved oxygen at discrete depths in Falling Creek Reservoir, Virginia, USA in 2012-2018
We measured water temperature and dissolved oxygen at multiple depths in Falling Creek Reservoir (Vinton, Virginia, USA) with high-frequency (10 to 15-minute) sensors for different durations during 2012 to 2018. Falling Creek Reservoir is owned and managed by the Western Virginia Water Authority as a primary drinking water source for Roanoke, Virginia. All measurements were collected at discrete depths at the deepest site of the reservoir adjacent to the dam. The sensors consisted of: 1) InsiteIG dissolved oxygen and water temperature sensors (Model 20 dissolved oxygen sensor) at both 1 m (November 2015 - December 2018) and 8 m (September 2012 - December 2018) and 2) HOBO (HOBO Pendant Temperature/Light 64K Data Logger) water temperature loggers deployed at 1, 2, 3, 4, 5, 6, 7, 8, and 9.3 m depths (September 2015 - January 2018).
Supplemental soil moisture and temperature data from the saddle catchment sensor network, 2019 - 2021.
Hand-held soil moisture measurements were taken at 8 of 16 soil moisture sensors within the sensor network at Niwot Ridge to supplement the continuous measurement system at these locations. The hand-held measurements occur much less frequently than the 10 min sensor data, but they are important in determining the spatial variability of soil moisture in the alpine.
Nearshore DuraFET and HOBO Sensor Data: pH and Temperature (May–Nov 2021)
Data are pH (total scale, DuraFET) and temperature (degrees Celsius, DuraFET and HOBO TidbiT) from instruments deployed at three sites in the rocky intertidal zone in California, USA. pH data were collected every 15 minutes and HOBO temperature data were collected every 5 minutes and interpolated to a 15 minute interval. Sensor data collection began in May 2021 and was terminated in November 2021. DuraFET-based pH sensors were constructed with guidance from Dr. Francis Chan at Oregon State University.
Dataset for "Design optimization of a phase-change capacitive sensor for irreversible temperature threshold monitoring and its eco-friendly and wireless implementation"
<p>This dataset contains the data collected during the SNSF BRIDGE GREENsPACK project (Grant no. 187223) in association with the recent publication entitled “Design optimization of a phase-change capacitive sensor for irreversible temperature threshold monitoring and its eco-friendly and wireless implementation”. This work aims to study the capacitive response of a resonating capacitive device coated with phase changing material (jojoba oil) as it melts when crossing its melting temperature. Several configuration were simulated with different electrode spacing, oil volume and encapsulation thickness and the induced changes in capacitance were tested experimentaly. An eco-friendly implementation of the optimized spiral resonating devices was tested wirelessly over a custom made near field antenna and the frequency of resonance was measured as the oil melted over the structure, irreversibly changing its resonance frequency. The data that was collected in the frame of this work is present in this repository. More information about the content of the dataset is present in the included README file.</p>
Preliminary data collected by 2 prototype Surface Velocity Platform drifters with Barometer and Reference Sensor for Temperature (SVP-BRST)
<p>The SVP-BRST drifter was developed to serve calibration and validation of Sentinel satellite SST retrievals. Two prototypes were deployed in the Mediterranean Sea end of April 2018. Preliminary data collected then until 11 June 2018 are published in this dataset. The drifters were developed and deployed under funding from the European Union's Copernicus Programme. The data are transmitted from the buoy to shore using data format #091 (see References).</p>
Satellite-based measurements of brightness temperatures (AMSR2 sensor) colocated to MOSAiC ground measurements
<p>The file contains measurements of brightness temperatures of satellite overpasses of the research vessel Polarstern during the MOSAiC expedition from October 26, 2019 - May 26, 2020 as well as co-located measurements of different parameters. For every overpass of Polarstern, the satellite measurement closest to the hourly position of Polarstern is taken.</p> <p>The satellite sensor is AMSR2 (six frequencies between 6.9 and 89 GHz and both polarizations) and we use the Level 1R (<em>Madea et al., 2016)</em> product available at JAXA <a href="https://gportal.jaxa.jp/gpr/">https://gportal.jaxa.jp/gpr/</a></p> <p>The co-located parameters are liquid water path, total water vapor, sea ice concentration, multi-year ice fraction, snow depth, snow-air interface temperature, snow-ice interface temperature, wind speed and sea surface temperature. In addition to the co-located parameters as ground truth, the dataset also contains their “uncertainties” given as temporal and/or spatial variability.</p> <p>Note: The dataset contains <strong>only</strong> satellite overpasses where co-located data is available.</p> <p>More information on the parameters are found below and they are described in more detail in <em>Rückert et al., 2023</em><em> </em>and the references given therein.</p> <ul> <li> <p><strong>scantime</strong>: time of satellite observation as included in the satellite data from JAXA</p> </li> <li> <p><strong>lon</strong>: longitude in decimal degrees (DD) of satellite observations as included in the satellite data from JAXA</p> </li> <li> <p><strong>lat</strong>: latitude in decimal degrees (DD) of satellite observations as included in the satellite data from JAXA</p> </li> <li> <p><strong>distance</strong>: distance to the hourly Polarstern position</p> </li> <li> <p><strong>TB6.9V, TB6.9H, TB10.7V, TB10.7H, TB18.7V, TB18.7H, TB23.8V, </strong><strong>T</strong><strong>B23.8H, TB36.5V, TB36.5H, TB89V, TB89H</strong>: Brightness temperatures (TB) measured by AMSRE2, the name includes the frequency in GHz and the polarization (either H for horizontal or V for vertical polarization), e.g, TB6.9V is the brightness temperature at 6.9 GHz and vertical polarization</p> </li> <li> <p><strong>LWP</strong>: liquid water path in kg/m² measured by a radiometer onboard the ship (<em>Walbröl et al., 2022</em>), averaged within +/- 10 minutes of the satellite observations</p> </li> <li> <p><strong>sigma_LWP</strong>: temporal variability of liquid water path (see previous point) given as standard deviation within +/- 10 minutes of the satellite observation time</p> </li> <li> <p><strong>TWV</strong>: total water vapor (integrated water vapor) in kg/m² measured by a radiometer onboard the ship (<em>Walbröl et al. (2022)</em>), averaged within +/- 10 minutes satellite observation time</p> </li> <li> <p><strong>sigma_TWV</strong>: temporal variability of total water vapor (see previous point) given as standard deviation within +/- 10 minutes of the satellite observation time</p> </li> <li> <p><strong>WSP</strong>: wind speed in m/s from the vessel’s meteorological observatory (<em>Schmithüsen et al., 2021</em>), averaged within +/- 10 minutes of the satellite observation time</p> </li> <li> <p><strong>sigma_WSP</strong>: temporal variability of wind speed (see previous point) given as standard deviation within +/- 10 minutes of the satellite observation time</p> </li> <li> <p><strong>SST</strong>: sea water temperature in K from the vessel’s meteorological observatory (<em>Schmithüsen et al., 2021</em>), averaged within +/- 10 minutes of the satellite observation time</p> </li> <li> <p><strong>sigma_SST</strong>: temporal variability of sea water temperature (see previous point) given as standard deviation within +/- 10 minutes of the satellite observation time</p> </li> <li> <p><strong>SND</strong>: snow depth in m obtained from the median of daily snow depth from available Snow and Ice Mass Balance Apparatus (SIMBA) buoys (<em>Lei et al., 2021</em><em>a</em>) in the proximity of Polarstern.</p> </li> <li> <p><strong>sigma_SND</strong>: spatial variability of snow depth (see previous point) given as standard deviation of all buoys available on that day.</p> </li> <li> <p><strong>Tsi:</strong> Snow-ice interface temperature in K obtained from the median of daily measurements from available Snow and Ice Mass Balance Apparatus (SIMBA) buoys (e.g. <em>Lei et al., 2021b</em>, for references of all buoys the reader is referred to the references given in <em>Rückert et al., 2023</em>) in the proximity of Polarstern.</p> </li> <li> <p><strong>sigma_Tsi:</strong> spatial variability of snow-ice interface temperature (see previous point) given as standard deviation of all buoys available on that day.</p> </li> <li> <p><strong>MYIF:</strong> multi-year ice fraction (from 0 to 1) based on classified TerraSAR-X scenes (<em>Guo et al., 2023</em>) in the proximity of Polarstern, interpolated to daily values.</p> </li> <li> <p><strong>sigma_MYIF:</strong> estimated (constant) uncertainty of multi-year ice fraction (see previous point).</p> </li> <li> <p><strong>SIC</strong>: sea ice concentration (from 0 to 1) based on classified TerraSAR-X scenes (<em>Guo et al., 2023</em>) in the proximity of Polarstern, interpolated to daily values.</p> </li> <li> <p><strong>sigma_SIC:</strong> estimated (constant) uncertainty of sea ice concentration (see previous point).</p> </li> <li> <p><strong>Tsa</strong>: Snow-air interface temperature in K based on infrared thermometer data (<em>Cox et al., 2023 a)-d)</em>) installed at four positions in the proximity of Polarstern, averaged within +/- 20 minutes of the satellite observation time.</p> </li> <li> <p><strong>sigma_Tsa:</strong> spatial variability of snow-ice interface temperature (see previous point), given as spatial (4 sites) and temporal (within +/- 20 minutes of the satellite observation time) standard deviation.</p> </li> </ul>
Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'
<p>This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”.</p> <p>This work aims to study the effect of photonic sintering parameters on the temperature behavior of printed zinc resistors, with the aim to fabricate eco-friendly and ecoresorbable temperature sensors on paper. Biodegradable electronic devices have potential in tackling the increasingly pressing challenge of electronic waste and printing methods allow to reduce toxic byproducts of fabrication and wasted material. The sintering method that is optimized here is based on our previous work combining electrochemical and photonic sintering approaches to enable the fabrication of highly-conductive degradable metal tracks. We optimize the sintering parameters to obtain zinc resistors with a high temperature coefficient of resistance and a linear temperature response curve. The data that was collected in the frame of this work is present in this repository. More information about the contents of the dataset is present in the included README files.</p>
New Hampshire Soil Sensor Network: Air Temperature, Soil Temperature, Soil Water Content, and Soil Electrical Conductivity, 2012 - ongoing
The goal of the New Hampshire Soil Sensor Network is to examine spatial and temporal changes in soil properties and processes as the climate changes. Data collected can also calibrate and validate models that examine how ecosystems may respond to changing climate and land use. To determine how soil processes are affected by climate change and land management, this soil sensor network measures snow depth, air temperature, soil temperature, soil volumetric water content, and soil electrical conductivity, as well as soil CO2 fluxes. This data package includes data from the air temperature, soil temperature, soil volumetric water content, and electrical conductivity sensors. Data were collected at the following sites: BRT = Bartlett Experimental Forest, Bartlett, NH; BDF = Burley-Demmerit Farm, Lee, NH; DCF = Dowst Cate Forest, Deerfield, NH; HUB = Hubbard Brook Experimental Forest, Woodstock, NH; SBM = Saddleback Mountain, Deerfield, NH; THF = Thompson Farm, Durham, NH; and Trout Pond Brook, Strafford, NH.
El Verde Field Station Air temperature from automatic sensor
Hourly air temperature for El Verde Field Station (2007 – present). Temperature is measured in the same box where we measure manual min-max temperature. The box is mostly shaded by surrounding trees, but it is more exposed to sunlight after hurricanes defoliate the forest canopy (e.g., hurricane Maria in 2017). Data is measured hourly using a HOBO Pendant data logger placed inside a wooden box. Notes: • Daily maximum and minimum air temperatures are available in separate data sets. This is a long-term monitoring of air temperature in the same box where we measure manual min-max temperature at El Verde Field Station. The data set is meant as a back up to the long-term manual data set. Data is measured hourly using a HOBO Pendant data logger placed inside a wooden box: under the shade of trees. The min-max thermometer that is measured manually during work days is located next to the HOBO in the same box. Support for this work was provided by grants BSR-8811902, DEB-9411973, DEB-9705814 , DEB-0080538, DEB-0218039 , DEB-0620910 , DEB-1239764, DEB-1546686, and DEB-1831952 from the National Science Foundation to the University of Puerto Rico as part of the Luquillo Long-Term Ecological Research Program. Additional support provided by the University of Puerto Rico and the International Institute of Tropical Forestry, USDA Forest Service.
Data from: Long-term, high frequency in situ measurements of intertidal mussel bed temperatures using biomimetic sensors
At a proximal level, the physiological impacts of global climate change on ectothermic organisms are manifest as changes in body temperatures. Especially for plants and animals exposed to direct solar radiation, body temperatures can be substantially different from air temperatures. We deployed biomimetic sensors that approximate the thermal characteristics of intertidal mussels at 71 sites worldwide, from 1998-present. Loggers recorded temperatures at 10–30 min intervals nearly continuously at multiple intertidal elevations. Comparisons against direct measurements of mussel tissue temperature indicated errors of ~2.0–2.5 °C, during daily fluctuations that often exceeded 15°–20 °C. Geographic patterns in thermal stress based on biomimetic logger measurements were generally far more complex than anticipated based only on 'habitat-level' measurements of air or sea surface temperature. This unique data set provides an opportunity to link physiological measurements with spatially- and temporally-explicit field observations of body temperature.
Dataset supplementing B. Ojha, N. Illyaskutty, J. Knoblauch, H. Kohler (2017): High temperature CO/HC gas sensors to optimize firewood combustion in low power fireplaces, Journal of Sensors and Sensor Systems (JSSS), 6, 237–246, 2017 (doi:10.5194/jsss-6-237-2017)
<p>Dataset presented in B. Ojha, N. Illyaskutty, J. Knoblauch, H. Kohler (2017): High temperature CO/HC gas sensors to optimize firewood combustion in low power fireplaces, Journal of Sensors and Sensor Systems (JSSS), 6, 237–246, 2017 (doi:10.5194/jsss-6-237-2017)</p>
Technical Reports: Methods - The application of temperature and light intensity as intermittency sensors in a temporary pond
<p>Dataset for Technical Reports: Methods - The application of temperature and light intensity as intermittent sensors in a temporary pond.</p>
Impacts of pressure, temperature, and rel. humidity on NDIR CO2 sensors (DATA)
<p>These files support the experiments demonstrated in the peer-reviewed article "Low-complexity methods to mitigate the impact of environmental variables on low-cost UAS-based atmospheric carbon dioxide measurements", available via open access at the European Geophysical Union's Atmospheric Measurements Techniques journal.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.