Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
395
datasets available to search
ShareScore release 0.9.0
Dataset results
395 results for “tiling”
Oyster recruitment to standardized ceramic tiles on the Virginia Coast in 2018, 2019, and 2021
This dataset contains measurements of Eastern oyster (Crassostrea virginica) recruitment to standardized ceramic tiles deployed across intertidal oyster reef sites in the Virginia Coast Reserve. Recruitment is defined as the number of macroscopic oyster recruits (less than or equal to 25 mm shell height) per square centimeter of tile surface, capturing settlement and early post-settlement survival. Data were collected in 2018, 2019, and 2021 across 9-16 reef sites per year, including both natural and restored reefs. The dataset supports research on spatial and environmental drivers of oyster recruitment and has been validated against natural reef substrate data for comparability.
Global Human Settlement Layer per zoom-level 18 Quadtree tile for selected countries as Spatialite database with OpenStreetMap building completeness assessment
<p>This Spatialite database contains the built-up area of the Global Human Settlement Layer (GHSL) per zoom-level 18 Quadtree tile. Additionally, it provides a comparison of the GHSL with buildings in OpenStreetMap: For each tile the built-up ratio between the building footprints and the GHSL is given and a binary completeness assessment (buildings complete, not complete) is provided for easy use. This dataset was created using the obmgapanalysis tool: https://git.gfz-potsdam.de/dynamicexposure/openbuildingmap/obmgapanalysis</p>
Virgin Islands National Park: Coral Reef: Recruitment Tiles
In this study, coral recruitment was measured on a kilometer-wide scale on shallow (5–6 m depth) fringing reefs in St. John, US Virgin Islands, with the objective of determining the extent to which variation in recruitment was affected by biophysical coupling involving temperature and flow. Coral recruitment was measured using settlement tiles deployed at 10 sites along 10 km of shore. The tiles were first deployed in August 2006, and thereafter replaced every ≈6 months to sample from either August to January, or January to August over 2 years. Seawater temperature was recorded at the 10 sites using logging thermistors, and flow was quantified using drogues. Overall, corals recruited at a rate equivalent to 76 corals m− 2 6 months− 1, and were represented mostly by poritids (43% of recruits), agaricids (29%), faviids (17%) and siderastreids (7%). Although the density of recruits differed among sites in a pattern that varied among periods and years, there was a consistent trend for mean density to decline from ≈ 4 corals tile− 1 at eastern sites, to ≤ 1 coral tile− 1 at western sites. One aspect of seawater temperature – the daily range – differed among sites and was greater at western compared to eastern sites, and while it was related inversely to recruitment over one of the sampling periods, it was equivocal as a physical process affecting recruitment. Instead, our results are consistent with biophysical coupling involving patch depletion and downstream filtering, whereby patches of coral larvae are delivered to the south shore of St. John and depleted of larvae through settlement as the water progresses westward.
MCR LTER: Coral Reef Resilience: Short-term Accumulation of Algal Biomass on Unglazed Ceramic Tiles from July 2010-August 2011
Caged tiles were placed at various sites to measure short-term algal accumulation in the absence of grazing by fishes or large invertebrates. These data document biomass of algae that accumulated on unglazed ceramic tiles (2.5 cm X 2.5 cm) placed inside cages (mesh size = 2.5 cm x 2.5 cm) at various sites around the island of Moorea for a period of 3 to 4 weeks. Three separate experiments were conducted (one during July-August 2010 and two in July-August 2011). In the first experiment (2010_Production), we measured the accumulation of algae after 24 days at two different depths on the forereef (10 and 17 m), and within the lagoon at four different distances from the reef crest (approximately 25, 100, 400, and 700 m). In the second experiment (2011_Production_Summary), we measured the accumulation of algae after 24 or 25 days at six forereef sites (LTER 1, Resilience 2, LTER 3, LTER 4, LTER 5, LTER 6). In this experiment, tiles were placed adjacent to the fish transects (see knb-lter-mcr.6) at a depth of 12 m. In the final experiment (Production_Time_Series), we measured the accumulation of algae on tiles at three day intervals over a period of 31 days. This experiment was conducted at Resilience 2. This material is based upon work supported by the U.S. National Science Foundation under Grant No. OCE 16-37396 (and earlier awards) as well as a generous gift from the Gordon and Betty Moore Foundation. Research was completed under permits issued by the French Polynesian Government (Délégation à la Recherche) and the Haut-commissariat de la République en Polynésie Francaise (DTRT) (Protocole d'Accueil 2005-2018). This work represents a contribution of the Moorea Coral Reef (MCR) LTER Site.
Phenological metrics for Protected Area "BayerischerWald", MODIS aqua tile h18v04
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "Donana", MODIS terra tile h17v05
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "Samaria", MODIS terra tile h19v05
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "SierraNevadaEcosystem", MODIS aqua tile h17v05
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "NorthernLimestone", MODIS terra tile h18v04
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "DanubeDelta", MODIS terra tile h20v04
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "Hardangervidda-h18v03", MODIS aqua tile h18v03
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "WaddenSea", MODIS aqua tile h18v03
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "PenedaGeres", MODIS terra tile h17v04
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Phenological metrics for Protected Area "MurgiaAltaPark", MODIS aqua tile h19v04
Phenological metrics derived from satellite data by use of R-package "phenex" (Lange (2017)). NDVI is filtered by modified BISE algorithm (see Viovy (1992)). NDVI curve is modelled with method DLogistic (see Doktor (2017), Lange (2017)). Phenological metrics include: (1) Start of season / green-up (GU); (2) End of season / senescence (SEN); (3) Length of vegetation period (VP); (4) GPP proxy (integral over vegetation period, GSIVI); (5) minimum NDVI (MinNDVI); (6) maximum NDVI (MaxNDVI); (7) day of minimum NDVI as julian date (MinDOY); (8) day of maximum NDVI as julian date (MaxDOY); (9) r-square of modelled NDVI curve; (1)-(4) are derived by using local threshold (LT) and global threshold (GT) method (see Doktor (2017), Lange (2017)). (1)-(6) include mean and standard deviation; References: [Viovy 1992]: Viovy N, Arino O, Belward A (1992) The Best Index Slope Extraction (BISE): A method for reducing noise in NDVI time-series. International Journal of Remote Sensing 13(8):1585–1590; [Doktor 2017]: Doktor D, Lange M (2017) Disparate applicability and broad spatio-temporal satellite resolution affects extracted trends of European spring phenology for 1989-2007. In preparation for Global Ecology and Biogeographie; [Lange 2017]: Lange M, Doktor D (2017) phenex: Auxiliary Functions for Phenological Data Analysis. R package version 1.4-5, https://CRAN.R-project.org/package=phenex, Last accessed on 2017-05-29;
Semi-regular Vase - Shell-lattice construction based on regular and semi-regular tiling via functional composition.
<p>This vase has been created using tools and algorithms developed at the Technion, and are part of the IRIT geometric modeling kernel (<a href="https://www.cs.technion.ac.il/~irit/">https://www.cs.technion.ac.il/~irit/</a>).</p> <p>This specific vase model has been created using function composition of dual semi-regular trivariate tiles over the shell geometry of trivariate deformation function yielding a trivariate volumetric representation of the shell.</p> <p>This model is provided in STL and MSH file formats.</p>
Semi-regular Duck - Shell-lattice construction based on regular and semi-regular tiling via functional composition.
<p>This duck has been created using tools and algorithms developed at the Technion, and are part of the IRIT geometric modeling kernel (<a href="https://www.cs.technion.ac.il/~irit/">https://www.cs.technion.ac.il/~irit/</a>).</p> <p>This specific duck model has been created using function composition of dual semi-regular tiles over the shell geometry of a B-spline bivariate duck. </p> <p>This model is provided in STL and OBJ file format.</p>
Discrete Land-Water Tiles Dataset
<p>A quad-tree based dataset of land and water tiles with world-wide coverage in WGS84 coordinate system (EPSG:4326) and a resolution of up to quad-level 18 (~150m height and width at the equator). This data separates the world into land and water tiles with any 4-tuple of tiles of the same classification value being recursively aggregated into their respective larger parent tiles. E.g. the quadkeys "3120", "3121", "3122", "3123" are aggregated into "312" if (and only if) they all share the same classification and would again be aggregated into "31" if "310", "311" and "313" also share that classification.</p> <p>The dataset is provided as a comma separated value (CSV) file and a spatialite database file with roughly 133 million entries and consists of the following fields:</p> <p>- classification - classification of tiles into land (0) or water (5)<br> - quadkey - the unique identifying quadkey of a tile<br> - size_tile_area_aea - the tile size in meter in Albers Equal Area (AEA) projection<br> - size_land_area_aea - the size of the land parts of a tile in AEA projection (only in coastal tiles)<br> - size_water_area_aea - the size of the water parts of a tile in AEA projection (only in coastal tiles)<br> - geometry - the tile geometry in EPSG:4326<br> - land_area - the land polygon geometry in EPS:4326 (only in coastal tiles)<br> - water_area - the water polygon geometry in EPSG:4326 (only in coastal tiles)</p>
Enumerating Cube Tilings
<p>This dataset contains 899,710,227 pairwise non-isomorphic 5-dimentional cube tilings. Each row in the canex_all.dat file stands for one of the aforementioned tilings. A C program to convert an encoded tiling to coordinates in the 5-d space (tocords.c) is also provided. Each row in the dataset has 33 elements, the last 32 of which stand for the cubes that constitute the tiling (the first element stands for the order of the automorphism group corresponding to the tiling- please refer to the journal paper for details) . The program (tocords.c) takes 32 integers (one may use the last 32 in any row from the dataset) as command line parameters and prints the cubes in coordinate form to the standard output.</p>
Comparison of conventional IgE assay and measurement of specific IgE to hemocyanin for the diagnosis of adult crab allergy (Running tile: Utility of crab extracts and hemocyanin in diagnosing crab allergy)
<p><span>Summary: </span></p> <p><span><span> </span>Specific IgE to hemocyanin was elevated in crab-allergic as compared to crab-tolerant patients.</span></p> <p><span><span> </span>The combination of specific IgE to hemocyanin and conventional IgE assays improved specificity.</span></p>
Comparison of conventional IgE assay and measurement of specific IgE to hemocyanin for the diagnosis of adult crab allergy (Running tile: Utility of crab extracts and hemocyanin in diagnosing crab allergy)
<p>Summary:</p> <p> Specific IgE to hemocyanin was elevated in crab-allergic as compared to crab-tolerant patients.</p> <p> The combination of specific IgE to hemocyanin and conventional IgE assays improved specificity.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.