Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
802
datasets available to search
ShareScore release 0.9.0
Dataset results
802 results for “urban data”
LAGOS-US HUMAN v2: Data module of human population(1990-2020), urbanization classification, and lake access in the conterminous U.S.
The LAGOS-US HUMAN v1 data package is an extension module of the LAGOS-US research platform that includes data characterizing human population (population count, race, ethnicity, socioeconomic information), urbanization, and lake access of 479,950 lakes larger than or equal to 1 ha in the conterminous U.S. (48 states plus the District of Columbia). This data module contains four data tables linked through the unique lake identifier for the LAGOS-US research platform, lagoslakeid. Human population characteristics (race, ethnicity, and socioeconomic factors) were derived from U.S. census data for 1990, 2000, 2010, and 2020. Lakes were classified as urban or not using two different classifications: one based on the ‘Developed’ land category in the National Land Cover Dataset; and another based on the 2020 Census Urban Areas category. Metrics for lake access were developed from national datasets on public boat launches, transportation, and public lands. LAGOS-US HUMAN v1 provides a link between lake data and human contexts, facilitating interdisciplinary research in limnology, urban ecology, environmental justice, and conservation. To facilitate such studies, users are encouraged to use the other three core data modules of the LAGOS-US platform: LOCUS (location, identifiers, and physical characteristics of lakes and their watersheds); GEO (geospatial ecological context at multiple spatial and temporal scales); and LIMNO (in situ lake physical, chemical, and biological measurements through time) that are each found in their own data packages.
Sap-flux and associated environmental data from ash tree monitoring at four urban parks in St. Paul, Minnesota, USA, from May to November of 2023.
We measured the sap flux density of eighteen ash trees (Fraxinus spp.) of varying health and canopy conditions across four urban parks in the City of St. Paul, MN, USA in summer 2023 with a low-cost, compact data logger system we designed in-house. Although many ash trees in the city have either been killed or removed to control the spread of Emerald Ash Borer, chemical insecticide treatments are available for trees that are in early stages infestation. The trees selected for the research have all been receiving insecticide treatment for a few years, but their health and canopy conditions vary. We also have collocated temperature, soil moisture, and precipitation measurements at the same site for summer 2023.
Urban material ground truth data for the 2007 HyMap hyperspectral image of Munich
<p><span>This dataset entails a spectral library file (.sli file with matching .hdr text file) with 12028 labeled spectra derived from the 4m resolution airborne hyperspectral HyMap image of Munich (Germany) that was acquired during the summer of 2007 (June 17 and 25 2007). The labeled image spectra are retrieved from pixels of the HyMap dataset that has been processed to level 2A surface reflectance in 119 bands ranging between the wavelengths of 455 nm and 2496 nm. The preprocessing performed on this image data is explained in Heldens et al. (2008) and Heiden et al. (2012). See the "Related works" section of this data publication.</span></p> <p><span>The ground truth (GT) data have been used in previous research (again, see the "Related works" section) and they were likewise used for the remote sensing-based mapping experiments with a generic urban spectral library performed in the frame of the GENLIB research project. The data set contains reflectance spectra of typical urban surface materials and their spectral variations.</span></p> <p><span>The spectra included in this dataset were sampled from the above mentioned HyMap image by (1) using the methodology described in Jilge et al. (2017) and (2) through the delineation of manually digitized regions of interest. The image spectra are <span> </span>labeled based on the method mentioned above and using ancillary reference data, already published urban spectral libraries, terrain knowledge and some field work. The header of the spectral library contains the various labels that were added to the image spectra. These labels cover:</span></p> <ul> <li><span>EAGLE Land Cover Component (LCC) from the EAGLE matrix version 3.1. Visit the </span><span><a href="https://land.copernicus.eu/en/eagle" target="_blank" rel="noopener"><span>website of the EAGLE framework</span></a></span><span> for more information.</span></li> <li><span>Material Groups (MG).</span></li> <li><span>Artificial Material Types (AMT).</span></li> </ul> <p><span>The value domains of these spectrum attributes are described in the look-up table included as a CSV-file in this data publication.</span></p> <p><span>While considerable efforts have been made to safeguard the accuracy of these data, they are published as is, without any warranty or support. Use at your own discretion.</span></p>
Environmental Data for Soil, Leaf, and Root samples Boston Street Trees and Massachusetts Rural and Urban Forests in Summer 2021
This dataset provides detailed environmental and tree-level data and metadata for over 850 samples collected from 91 trees across an urban-to-rural gradient in Massachusetts. The dataset captures key variables characterizing urban environmental gradients, including soil moisture, pH, temperature, and nitrogen availability. Tree-level attributes include species identification, diameter at breast height (DBH), and growth rate based on previous tree census data. Geographic coordinates and site-specific context (urban forest, rural forest, street tree, forest edge, forest interior) are included to enable spatial analyses. The microbial sequence data associated with this environmental metadata can be found in the NCBI SRA under BioProject accession number PRJNA1297772.
Data for: The circular economy potential of urban organic waste streams in low- and middle-income countries
<p>This dataset includes the research data and supporting information for the publication "The circular economy potential of urban organic waste streams in low- and middle-income countries" which was published in the Journal of Environment, Development and Sustainability (DOI: 10.1007/s10668-021-01487-w).</p> <p>This dataset and the associated publication are the basis upon which the REVAMP (Resource Value Mapping) tool has been developed. See more info about the REVAMP tool here: https://www.sei.org/revamp</p> <p> </p>
Data: Disentangling drivers of temporal changes in urban pond macroinvertebrate diversity
<p>Data for: (i) presence and abundance of Odonata and Trichoptera (larvae), and Coleoptera and Hemiptera (larvae and adults) species in ponds in Stockholm, Sweden, in 2014 and 2019, (ii) environmental data 2014 and 2019 (pond data like water chemistry, and land-change data), (iii) coordinates of ponds and pond area, (iv) and R script to reproduce analyses presented in Granath et al. 2024 (Urban Ecosystems, https://doi.org/10.1007/s11252-023-01500-2). A meta-data file with descriptions of the data files is also included.</p>
Supplementary Material for "Using Unstructured Crowd-sourced Data to Evaluate Urban Tolerance of Terrestrial Native Animal Species within a California Mega-City"
<p>This data repository is for the publication "Using Unstructured Crowd-sourced Data to Evaluate Urban Tolerance of Terrestrial Native Animal Species within a California Mega-City" and contains all R scripts and data files to reproduce results as well as all supplementary tables and figures.</p>
Urban form data for climate modelling: Sydney at 300 m resolution derived from building-resolving and 2 m land cover datasets
<p><strong>Sydney morphology and land surface dataset</strong></p> <p>This dataset for Sydney, Australia, represents land cover, building morphology, vegetation morphology and other parameters appropriate for input into local or mesoscale urban climate models.</p> <p>The dataset is provided in netCDF4 and GeoTiff formats.</p> <p>Associated manuscript:</p> <blockquote> <p><a href="https://doi.org/10.3389/fenvs.2022.866398">A transformation in city-descriptive input data for urban climate models</a></p> </blockquote> <p>Citation for the open dataset:<br> - Lipson, M., Nazarian, N., Hart, M. A., Nice, K. A., and Conroy, B.: Urban form data for climate modelling: Sydney at 300 m resolution derived from building-resolving and 2 m land cover datasets (v1.01), <a href="https://doi.org/10.5281/zenodo.6579061">https://doi.org/10.5281/zenodo.6579061</a>, 2022.</p> <p>Citation for the associated manuscript:<br> - Lipson, M. J., Nazarian, N., Hart, M. A., Nice, K. A., and Conroy, B.: A Transformation in City-Descriptive Input Data for Urban Climate Models, Frontiers in Environmental Science, 10, <a href="https://doi.org/10.3389/fenvs.2022.866398">https://doi.org/10.3389/fenvs.2022.866398</a>, 2022.</p> <p>Location of associated processing code:<br> - <a href="https://github.com/matlipson/geoscape_processing_public.git">https://github.com/matlipson/geoscape_processing_public.git</a></p> <p><strong>Acknowledgments</strong></p> <p>We gratefully acknowledge the Australian Urban Research Infrastructure Network (AURIN) and Geoscape Australia for <br> providing the datasets necessary for this study, drawing on Geoscape Buildings, Surface Cover and Trees datasets, <br> © Geoscape Australia, 2020: https://geoscape.com.au/legal/data-copyright-and-disclaimer/. <br> This research was supported by the Australian Research Council (ARC) Centre of Excellence for Climate System Science <br> (grant CE110001028), the ARC Centre of Excellence for Climate Extremes (grant CE170100023). </p> <p> </p>
Urban material ground truth data for the 2015 APEX hyperspectral image of Brussels
<p>This dataset entails a spectral library file (.sli file with matching .hdr text file) with 1350 georeferenced and labeled spectra derived from the 2m resolution airborne hyperspectral APEX image of Brussels (Belgium) that was acquired during the summer of 2015. The labeled spectra included in this dataset describe level 2A surface reflectance profiles ranging between 450 and 2431 nm. The original APEX image files can be downloaded via the <a href="https://belair.vito.be/en/belair-data" target="_blank" rel="noopener">Belair website</a>, and the preprocessing performed on this image data is explained in Sterckx et al. (2016) and Vreys et al. (2016). See the "Related works" section of this data publication.</p> <p>The main purpose of this dataset is to provide Ground Truth (GT) data for remote sensing-based mapping experiments with a generic urban spectral library, performed in the frame of the GENLIB research project. The content of this dataset hence focuses on the optical reflectance/absorption behaviour of urban surface materials and their variations.</p> <p>The spectra included in this dataset were manually sampled from the above mentioned APEX image and labeled using ancillary reference data (very high-resolution aerial imagery, Google Street View, LiDAR ...), already published urban spectral libraries, terrain knowledge and some field work. The header of the spectral library contains the various labels that were added to these spectra. These labels cover:</p> <ul> <li>EAGLE Land Cover Component (LCC) from the EAGLE matrix version 3.1. Visit the <a href="https://land.copernicus.eu/en/eagle" target="_blank" rel="noopener">website of the EAGLE framework</a> for more information.</li> <li>Material Groups (MG).</li> <li>Artificial Material Types (AMT).</li> <li>Artificial Material Coating or Fabrication (AMCF).</li> <li>Artificial Material Forms (AMF).</li> <li>Latitude (degrees, WGS84).</li> <li>Longitude (degrees, WGS84).</li> </ul> <p>The value domains of these spectrum attributes are described in the look-up table included as a CSV-file in this data publication.</p> <p>While considerable efforts have been made to safeguard the accuracy of these data, they are published as is, without any warranty or support. Use at your own discretion.</p>
The data that support the findings of a review paper "From urban data to city-scale models: A review of traffic simulation case studies"
<p>This dataset contains the data that were used in a review paper "From urban data to city-scale models: A review of traffic simulation case studies". It contains the following files:</p> <ul> <li>keywords with counts.txt - list of keywords and their counts in the considered corpus of traffic simulation case studies. The data were used to produce Figure 2 and Figure 3 in the paper.</li> <li>Papers analysis.xlsx - Excel file containing the data on the reviewed studies. The document has the following sheets: <ul> <li> Appendix A - contains a table short reference, location, simulation period, spatial scale, simulated units and marked categories for a paper;</li> <li>Geography - contains data on geographical distribution of simulated areas between world regions and countries, these data were used to produce Figure 4 in the paper;</li> <li>Software tools - contains data on simulation tools used in the studies. </li> <li>Journals and conferences - contains data on where the reviewed papers were published.</li> </ul> </li> </ul>
Data for manuscript titled 'Impact of urbanization and drought on river water quality, case study of nutrient levels in Cuenca and Giron (Azuay, Ecuador)'
<p>The uploaded zip-file entails the data obtained through four field campaigns performed in the province of Azuay (Ecuador) in the period July 2023 - May 2024, which is used as a basis for the manuscript titled 'Impact of urbanization and drought on river water quality, case study of nutrient levels in Cuenca and Giron (Azuay, Ecuador)' that was submitted to a Special Issue in the journal Water in 2024. The study aimed at illustrating the impact of urbanisation and drought on the abiotic water conditions of the rivers passing through the studied urban areas.</p> <p>The data includes a subfolder with data obtained from an external website (https://generacioncsr.celec.gob.ec/graficasproduccion/) and aligns with the folder structure of the GitHub-repository that contains the analysis scripts (to be added when the manuscript is accepted). The data file only contains the baseline data, while results can be obtained through running the R-scripts in the GitHub-repository. Additional comments on the analyses are also provided in the analysis scripts.</p> <p><strong>DATA COLLECTION</strong></p> <p>Information on the locations was collected prior to the first field campaign (July 2023) and confirmed in the field (and corrected when necessary). The following variables were registered: Date & Time, Coordinates (latitude and longitude, in WGS84 format), Altitude (in meters above mean sea level), Distance (to a fixed location downstream; being the province border), and Category (River or Stream).</p> <p>Information on the physicochemical conditions was collected directly in the field with a <strong>Horiba U-52</strong> multiprobe. The following variables were registered: Temperature, pH, Electrical conductivity (reference at 25 °C), Oxygen level (as concentration), and Turbidity (in NTU).</p> <p>At each site, a bucket was rinsed thrice with prevailing surface water and subsequently filled with a water sample of the top of the water column. The multiprobe was rinsed with this sample water and then submerged in the bucket, followed by continuous stirring (to avoid a decrease of the oxygen levels) until the readings stabilised. After stabilisation, readings were recorded on a separate data sheet prior to being digitalised.</p> <p>Information on the nutrient levels was obtained through the collection of water samples in the field and the subsequent analysis in the laboratory. The following nutrients were selected: ammonium, nitrate, nitrite, and orthophosphate. For the analyses, <strong>Merck test kits</strong> (equivalent to USEPA analyses) were used in combination with a Genesys UV-VIS spectrophotometer (Thermofisher).</p> <p><strong>In the field</strong>, a bucket was rinsed thrice with prevailing surface water and subsequently filled with a water sample of the top of the water column. A polyethylene syringe was rinsed thrice with sample water and subsequently filled prior to being fitted with a 0.45 µm PES filter. About 100 mL of sampled water was filtered and collected in a 250 mL polyethylene bottle that was rinsed with the first 5 mL of filtered water. The bottle was stored in a cooling box and transported to the laboratory.</p> <p><strong>In the laboratory</strong>, the 250 mL bottle was stored at 4 °C until analysis. Within 36 hours, concentrations of ammonium, nitrate, nitrite, and orthophosphate were determined <strong>in triplicate</strong>. More specifically, the following test kits were used to determine said nitrogen and phosphorus concentrations (with quantification range between brackets):</p> <ul> <li>Ammonium: 1.14752.0001 (0.05-3.00 mgN/L)</li> <li>Nitrate: 1.14773.0001 (2-20 mgN/L)</li> <li>Nitrite: 1.14776.0001 (0.02-1.00 mgN/L)</li> <li>Orthophosphate: 1.14848.0001 (0.05-5.00 mgP/L)</li> </ul> <p>Regarding the <strong>spectrophotometric determination</strong>, all analyses were complemented with a blank and a standard with a known concentration of each individual nutrient component. For each nutrient, a specific wavelength was used and the resulting absorbance was converted to the associated nutrient concentration through known factors (similar to the use of calibration curves), after setting the absorbance of the blank as reference absorbance (i.e. a concentration of 0 mg/L). All of the analyses were performed with plastic 1-cm cuvettes during the first campaign, while 5-cm cuvettes were used in the remaining three campaigns due to low nutrient levels (except for nitrate, for which an analysis through 5-cm cuvettes is not supported by the used test kits).</p>
Data on public understandings of and attitudes towards carbon-smart urban green infrastructure in Kumpula, Helsinki
<p>A public participatory GIS -survey dataset detailing public understandings of and attitudes towards carbon-smart urban green infrastructure in Kumpula, Helsinki, Finland.</p>
Data on different types of green spaces and their accessibility in the seven largest urban regions in Finland
<p>This repository contains data described in the article "Data on different types of green spaces and their accessibility in the seven largest urban regions in Finland" (Heikinheimo et al. 2023) and used in the research article "Associations of neighborhood-level socioeconomic status, accessibility, and quality of green spaces in Finnish urban regions" (Viinikka et al. 2023). <br> <br> This repository contains data on green space quality and path distances to different types of green spaces. The path distances represent green space accessibility using active travel modes (walking, cycling). The path distances were calculated using the pedestrian street network across the seven largest urban regions in Finland. We derived the green space typology from the Urban Atlas Data that is available across functional urban areas in Europe and enhanced it with national data on water bodies, conservation areas and recreational facilities and routes from Finland. We extracted the walkable street network from OpenStreetMap and calculated shortest paths to different types of green spaces using open-source Python programming tools. Network distances were calculated up to ten kilometers from each green space edge and the distances were aggregated into a 250 m x 250 m statistical grid that is interoperable with various statistical data from Finland. The geospatial data files representing the different types of green spaces, network distances across the seven urban regions, as well as the processing and analysis scripts are shared in an open repository. These data offer actionable information about green space accessibility in Finnish city regions and support the integration of green space quality and active travel modes into further research and planning activities.</p> <p> </p> <p><strong>Data description article: </strong></p> <p>Heikinheimo, V., Tiitu, M., & Viinikka, A. (2023). Data on different types of green spaces and their accessibility in the seven largest urban regions in Finland. <em>Data in Brief</em>, <em>50</em>, 109458. <a href="https://doi.org/10.1016/j.dib.2023.109458">https://doi.org/10.1016/j.dib.2023.109458</a></p> <p><strong>Related research article:</strong> </p> <p>Viinikka, A., Tiitu, M., Heikinheimo, V., Halonen, J. I., Nyberg, E., & Vierikko, K. (2023). Associations of neighborhood-level socioeconomic status, accessibility, and quality of green spaces in Finnish urban regions. <em>Applied Geography</em>, <em>157</em>, 102973. <a href="https://doi.org/10.1016/j.apgeog.2023.102973">https://doi.org/10.1016/j.apgeog.2023.102973</a></p>
Residential housing segregation and urban tree canopy in 37 US Cities; data in support of Locke et al 2021 in npj Urban Sustainability
Our goal in this paper is to examine whether there are similar patterns in the distribution of tree canopy by Home Owners’ Loan Corporation (HOLC) graded neighborhoods across 37 cities. A pre-print of the paper can be found here: https://osf.io/preprints/socarxiv/97zcs This data packages contains: 1. City-specific file geodatabases with features classes of the HOLC polygons obtained from the Mapping Inequality Project https://dsl.richmond.edu/panorama/redlining/, and tables summarizing tree canopy, and in some cases other land cover classes. 2. An *.R script that replicates all of the analyses, graphs, and tables in the paper. Other double checks, exploratory, and miscellaneous outputs are created by the script too as a bonus. Everything in the paper can be done with the script; additional work outputs are also created. 3. A *.csv file containing city, the HOLC grade, and the percent tree canopy cover. This can be used to create the main findings of the paper and this flat file is provided as an alternative to running the R script to extract information from the geodatabases, combine, and analyze them. The intention is that this file is more widely accessible; the underlying information is the same. Redlining was a racially discriminatory housing policy established by the federal government’s Home Owners’ Loan Corporation (HOLC) during the 1930s. For decades, redlining limited access to homeownership and wealth creation among racial minorities, contributing to a host of adverse social outcomes, including high unemployment, poverty, and residential vacancy, that persist today. While the multigenerational socioeconomic impacts of redlining are increasingly understood, the impacts on urban environments and ecosystems remains unclear. To begin to address this gap, we investigated how the HOLC policy administered 80 years ago may relate to present-day tree canopy at the neighborhood level. Urban trees provide many ecosystem services, mitigate the urban heat island effect
Urban-Rural Temperature Data-relation between land-cover and the Urban Heat Island in San Juan, Puerto Rico
Our objective in this study is to quantify the UHI created by the San Juan Metropolitan Area over space and time using temperature data collected by mobile and fixed-station measurements. We used the fixed-station measurements to examine the relation between average temperature at a given location and the density of vegetation located upwind. We then regressed temperatures against regional land-cover to predict future temperature with projected land-cover change. Our data show the existence of a nocturnal UHI, with average nighttime urban-rural temperature differences (ΔTU-R) of up to 3.02°C. Each of the stations listed in this excel file were used to calculate the urban heat island created by the San Juan Metropolitan Area. Support for this work was provided by grants BSR-8811902, DEB-9411973, DEB-9705814 , DEB-0080538, DEB-0218039 , DEB-0620910 , DEB-1239764, DEB-1546686, and DEB-1831952 from the National Science Foundation to the University of Puerto Rico as part of the Luquillo Long-Term Ecological Research Program. Additional support provided by the University of Puerto Rico and the International Institute of Tropical Forestry, USDA Forest Service.
Greenhouse gas and water chemistry data from urban ponds in Madison, Wisconsin during the summer and under-ice period of 2021-2022
Stormwater ponds are common features in urbanized landscapes and can suffer from rapid oxygen depletion when thermally stratified or ice-covered. To investigate under-ice oxygen dynamics and drivers of bottom water oxygen saturation, we sampled 20 stormwater ponds in Madison, Wisconsin, USA during the summer of 2021 and winter 2022. The urban ponds ranged in age, shape, size, and depth. We repeatedly took YSI profiles of water temperature, oxygen, and specific conductance 7 times in the summer and 3 times in the winter. Water chemistry variables were collected in the surface waters, habitat surveys were conducted in the summer, and ice/snow thickness was recorded in the winter. We also measured the concentration of greenhouse gases in the surface waters as a consequence to oxygen depletion using the headspace equilibrium method.
Survey of open data and information seeking in Kenya's Urban Slums and Rural Settlements
<p>This dataset provides survey responses from 240 people surveyed as part of the "Investigating the Impact of Kenya’s Open Data Initiative on Marginalized Communities: Case Study of Urban Slums and Rural Settlements" project.</p> <p>The data, collected in mid-2013 looks at issues of where citizens look for data, and how successful they have been in getting government information from different sources, as well as their awareness of the Kenya open data portal, and their interest in getting information through different digital channels in future.</p> <p>Descriptive statistics have been analysed in the publication "Open Government Data for Effective Public Participation: Findings of a Case Study Research Investigating The Kenya's Open Data Initiative in Urban Slums and Rural Settlements", but no further analysis has yet been carried out.</p> <p><strong>Data descriptions</strong></p> <p>The Codebook.csv file lists variable names and the questions asked to elicit each response.</p> <p>JHC-Data.csv contains the results from the questionnaires collected through structured in-person interview in the three locations. The questionnaires were administered at chiefs centres, community resource centres, constituency development fund office and religious centres). The questionnaires were filled in by every 2nd these centres.</p> <p><strong>More information</strong></p> <p>More information on the research project can be found at http://opendataresearch.org/project/2013/jhc</p>
Data: "Using butterfly survey data to model habitat associations in urban developments", JEJ Cooper et al., (2023)
<p>This data package has been used to examine the responses of UK butterfly species </p> <p>to different features of the urban environment. 'JC_WCBSmodel.Rdata' presents the</p> <p>butterfly abundance data, and supporting information about </p> <p>species and sites. This data can be fed through the script '04_model_builder.R', to </p> <p>produce the models reported in the research article. '00_functions.R' is a script </p> <p>containing functions which support the modelling process, which is loaded as part of </p> <p>the 04_model_builder script. </p> <p> </p> <p>Summaries of the resulting models are an output of that script - </p> <p>'Butterfly_GAM_Outputs.xlsx'. These are represented graphically in the manuscript, </p> <p>using scripts '06_01_Map'.R:'06_03_Cross_Validation'. '06_04_Model_Metric.R' </p> <p>is a further summary of the .xlsx file, found in the Supplementary Materials. </p> <p>'06_05_graphic_4_twitter.R' produces a condensed version of the figure resulting </p> <p>from the script '06_02_Metric_Summary.R'</p> <p> </p> <p>Dataset descriptions are found in the attached readme.txt</p> <p>........................................................................................</p> <p>We would also greatly appreciate if you could fill out <a href="https://forms.gle/DCc58VXpdmqnTmTk8" target="_blank" rel="noopener">this very short form</a> to tell us how you intend to use these data. Thanks in advance!</p>
Empirical data, qualitative codes, analysis: Schuur J.S. et al. Identifying levers of urban neighbourhood transformation. npj Urban Sustainability (2023)
<p>Please refer to the stand-alone "2023_SchuurJS_UrbanSustainabilityfinal.html" file where the analysis and results corresponding to the article titled: "Identifying levers of urban neighbourhood transformation using serious games" is presented. The underlying data sets and Rmarkdown script used for the analysis can be used to re-run the analysis. Ensure to read the "0_README.txt" file to build the appropriate folder structure to do so.</p>
PTR-ToF-MS data from cooking experiments in Healthy Energy-efficient Urban Home Ventilation
<pre>The dataset contains high-resolution PTR-Tof MS data from preparing meals consisting of fried salmon and vegetables in SINTEFs ventilation laboratory. <br>The data are organized in csv files containing concatenated results of ppb-values. PTR-ToF-MS grouped by month, m/z-valuens in column names. Relatable to the list of experiments. See readme file for details and 10.1016/j.buildenv.2024.111743 for description</pre>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.