Find research datasets worth reusing
Search datasets from major research repositories and use ShareScore to quickly assess how well each record supports discovery, access, and reuse.
28
datasets available to search
ShareScore release 0.9.0
Dataset results
28 results for “wave data set”
DATA SET: Performance Assessment of a Commercial Continuous-Wave Near-Infrared Spectroscopy Tissue Oximeter for Suitability for Use in an International, Multi-Center Clinical Trial
<p>This repository contains the data sets related to the publication:</p> <p>Cortese, L.; Zanoletti, M.; Karadeniz, U.; Pagliazzi, M.; Yaqub, M.A.; Busch, D.R.; Mesquida, J.; Durduran, T. Performance Assessment of a Commercial Continuous-Wave Near-Infrared Spectroscopy Tissue Oximeter for Suitability for Use in an International, Multi-Center Clinical Trial. <em>Sensors</em> <strong>2021</strong>, <em>21</em>, 6957. https://doi.org/10.3390/s21216957</p>
A ferrofluid-based sensor to measure bottom shear stresses under currents and waves. Data set: Ferrofluids_Opt_2018_DiDonFranceesco
<p>The experimental calibration of the system for measuring bed shear stresses under currents was carried out at the Hydraulic Laboratory of the University of Catania.</p> <p>In this experimental campaign the magnet S0805 and S0808 were used. The tests were conducted for several bottom configurations (smooth bottom; thin sand d<sub>50</sub>=0.24 mm; coarse sand d<sub>50</sub>=0.56 mm; and mixed sand 70% thin sand and 30% coarse sand). The goals of such tests were: to study the effects of the type of magnets and to carry out a preliminary analysis the ferrofluid behavior over sandy bottom.</p>
A ferrofluid-based sensor to measure bottom shear stresses under currents and waves. Data set: Ferrofluids_Opt_2017_Privitera
<p>The experimental calibration of the system for measuring bed shear stresses under currents was carried out at the Hydraulic Laboratory of the University of Catania.</p> <p>In this experimental campaign magnet type S0805 and a number of magnets equal to 2,3 and 4 were used. The tests were conducted both over a fixed bed (Perspex<sup>©</sup>) and in the presence of mobile beds. The goals of such tests were: to study of the velocity profiles for some fixed and mobile bottoms; to study the effects of the number of magnets on the ferrofluid behavior; preliminary analysis of the bed shear stress over sandy bottom.</p>
Shear Wave Splitting and Mantle Flow beneath Alaska Data Set
<p>Entire data set for the (under review) publication "Shear Wave Splitting in Alaska."</p> <p>McPherson_S1_Station_Info is a table that contains the following columns (with header row): Station Name, Network, Latitude (Deg), Longitude (Deg). This is a table of all the seismic stations in Alaska and western Canada that we downloaded data from. Only stations that were active from Jan 1, 2010, to Aug 18, 2017 are included.</p> <p>McPherson_S2_Event_Info is a table that contains the following columns (with header row): Julian Date, Origin Time, Latitude (Deg), Longitude (Deg), Depth (km), Magnitude (Mw). This is a table of all the seismic events that occurred between Jan 1, 2010, to Aug 18, 2017 within the distance range 80 to 140 degrees from a station, over moment magnitude 5.</p> <p>McPherson_S3_Results_Info is a table that contains the following columns (with header row): Station Name, Back Azimuth (Deg), Distance (Deg), Fast Direction (Deg), Lower Bound (Deg), Upper Bound (Deg), Time Difference (sec), Lower Bound (sec), Upper Bound (sec), Julian Date, Origin Time. This table contains all of the minimum energy method (Silver & Chan, 1991) results that are displayed in Figures 4, 6-12 of the paper under review.</p> <p>McPherson_S4_Nulls_Info is a table that contains the following columns (with header row): Station Name, Back Azimuth (Deg), Distance (Deg), Julian Date, Origin Time. This tables contains all the null results displayed in Figure 5 of the paper under review.</p>
Data Set - Laboratory measurement of the wave–induced plastic particles motion: The influence of wave period, plastic size and plastic density
<p><strong>Data set - Laboratory measurement of the wave–induced plastic particles motion: The influence of wave period, plastic size and plastic density</strong></p> <p>This data set describes the wave flume experimental data on the wave-induced plastic particles motion induced by different wave conditions and different plastic particles density and size. A manuscript is currently under review describing the analysis of the data.</p> <p>The data set is divided in two parts:</p> <p>- <strong>Wave flume hydrodynamics</strong>. With measured water surface elevation at different locations within the wave flume. These data are stored in txt files with headings describing the type of measurement, i.e. wave paddle motion, water surface elevation at different sensors, synchronization signal for the video-cameras.</p> <p>- <strong>Lagrangian trajectories. </strong>hdf5 files with information of the particles position, velocity and time (with respect to the synchronization signal in the respective hydrodynamic file) for each experiment. Two tar.gx files have been uploaded with trajectories information:</p> <p> - TOPIOS_Trajectories_FloatingParticles.tar.xz, with information of floating plastic particles and,</p> <p> - TOPIOS_Trajectories_NonfloatingParticles.tar.xz, with information of non-floating plastc particles.</p> <p>An excel file with information of filenames, cross-shore locations of sensors, plastic particles and wave conditions is also uploaded (TOPIOS_Control_exp.xlsx).</p> <p>Any question regarding the data can be addressed at jose.alsina@upc.edu</p>
SSH data set used for Rossby Wave Analysis, extraction from ORCA12.L46-MJM189 DRAKKAR simulation
<p>This data set corresponds to the Sea Surface Heigh (SSH) silmulated by the NEMO ocean circulation model, under the ORCA12.L46-MJM189 configuration, developped in the frame of the DRAKKAR project. This particular data set is an extraction from the native numerical grid, covering the area between 38N and 40N in the North Altantic ocean, for the period 1970 to 2015. The data are concatenated in a single file with 5-days average of SSH. The corresponding metrics for this sub domain are also present in this netcdf file. This subset was used in Watelet et al. (2020) submitted paper, dealing with Rossby waves analysis.</p>
Data set for publication: Extended SINDICOMP: Characterizing MV Voltage Transformers with Sine Waves
<p>This is dataset for paper published:</p> <p>Crotti, G.; D’Avanzo, G.; Giordano, D.; Letizia, P.S.; Luiso, M. Extended SINDICOMP: Characterizing MV Voltage Transformers with Sine Waves. <em>Energies</em> <strong>2021</strong>, <em>14</em>, 1715. https://doi.org/10.3390/en14061715</p> <p> </p> <p>Excel file provides data for Table 2, Table 4 and Figure 10 a.</p>
Data set of manuscript entiteld Sigma Oscillations Protect or Reinstate Motor Memory Depending on their Temporal Coordination with Slow Waves
<p>Data set of manuscript entiteld Sigma Oscillations Protect or Reinstate Motor Memory Depending on their Temporal Coordination with Slow Waves</p> <p>EEG files : Brainvision</p> <p>*.dat; *.edf : eeg files of the experimental nap </p> <p>*.vhdr: corresponding header files</p> <p>*.vmrk: corresponding marker files time starting from recording sample</p> <p>*._Pauselog.txt: markers with condition in the stimulation computer time</p> <p>Sleep Scores: </p> <p>Scores by the sleep technician (one file per participants). </p> <p>Surveys:</p> <p>General survey (first screening) and complete survey (for inclusion). Code correspondance is provided in ID_correspondance.txt</p> <p>BehavData:</p> <p>For each participant, a text file with all the cues and responses logged for each tasks. *_raw.txt are present when an issue arised during experiment and a task needed to be re-started. </p> <p> </p>
Data Set : Seismic Wave Propagation Simulations in Indo Gangetic Basin using Spectral Element Method
<p>Indo Gangetic (IG) basin is one of the largest alluvial basins in the world. The surrounding Himalayan topography and the geometry of the basin make the IG basin unique. The analysis of seismic response of the basin is important as the region is seismically active with more than 40% of Indian population residing in it. This online database consists of the input files for performing the spectral finite element simulation for IG basin by incorporating the 3D variation of material properties and basin geometry. The input files consists of mesher, solver and CMTSOLUTION files for SPECFEM3D Cartesian (Version-3) simulation.</p>
Report of the Posidonia data set done at the CIEM wave flume on 2008
<p>The data set presents the results from experiments done in the CIEM large wave flume of Barcelona on wave and flow attenuation by a full-scale artificial Posidonia oceanica seagrass meadow in shallow water conditions. </p> <p>More information can be found on the published papers:</p> <p>Manca, E., I. Caceres, J. Alsina, V. Stratigaki, I. Townend, C.L. Amos., 2012. Wave energy and wave-induced flow reduction by full-scale model Posidonia oceanica seagrass. Continental Shelf Research, Vol. 50-51 ,pp. 100 - 116.</p> <p>Stratigaki, V., Manca, E., Prinos, P., Losada, I., Lara, J., Sclavo, M., Amos, C., Cáceres, I. and Sánchez-Arcilla, A., 2011. Large-scale experiments on wave propagation over Posidonia oceanica. Journal of Hydraulic Research, Vol. 49, pp. 31-43.</p> <p> </p>
Influence of storm sequencing and beach recovery on sediment transport and beach resilience data set at CIEM large scale wave flume.
<p>The Influence of storm sequencing and beach recovery on sediment transport and beach resilience (RESIST) experiments project proposes to study experimentally sequences of storm induced erosion and beach recovery, with a particular focus on the poorly known morphodynamic processes under low energy conditions. Series of large scale experimental tests were done to collect data on the cross-shore hydrodynamics, sediment transport and beach evolution. The main aim of this proposal is to investigate the influence of sequences of beach erosion-recovery in the overall beach profile evolution.</p> <p>The tested wave conditions (2 erosive and 3 Accretive bichromatic conditions) were combined to form three sequences of changing high/mild energy conditions. Each condition started from an initial beach 1/15 handmade profile.</p> <p>The experiments were carried out in the large scale wave flume CIEM at Universitat Politècnica de Catalunya (UPC), Barcelona within the program of Transnational Access of Hydralab+.</p> <p>Due to its size, the data set can not be placed on this repository and will be provided on demand. Please contact with the authors or with the data manager of the CIEM installation.</p>
Ripple Complex Experiments data set at CIEM large scale wave flume within Hydralab + project.
<p>The RIPCOM experiments (RIPple COMplex experiments) are presented in order to study the ripple growth conditions on large wave flume tests under fine unimodal, coarse unimodal and mixed sands conditions. The main objectives of the experiments is to improve and understand the protocols to perform mixed sediment experiments within the ripple regime and use/improve the equipment developed at Task 9.1 of the COMPLEX Joint Research Activity within Hydralab+. The experiments were carried out in the large scale wave flume CIEM at Universitat Politècnica de Catalunya (UPC), Barcelona.</p> <p>The experimental plan is divided in three steps:</p> <p>1. Find the optimum wave conditions that ensure ripples (based on measured velocities and previous literature studies) on the study area. Test the targeted waves with unimodal fine sediment (d 50 =0.250 mm) and measure the obtained ripples under the tested conditions. From the obtained measurements, the waves to be used on the next two steps are selected in order to fix the best conditions to produce ripples within the experimental constrains.</p> <p>2. The 13 upper cm of the fine sediment is removed and replaced by the coarser sediment (d 50 =0.545 mm). Once that is done the selected waves to be tested are reproduced and the bottom bedforms are measured.</p> <p>3. Mix both sediments fine and coarser sand homogeneously in order to repeat the selected wave conditions and measure the ripples growth and evolution under mixed sediment conditions.</p> <p>Due to its size, the data set can not be placed on this repository and will be provided on demand. Please contact with the authors or with the data manager of the CIEM installation.</p>
Wave-induced steady current data set produced at the CIEM wave flume, Hydralab III
<p>The data set here presented reports the Wave-induced steady currents experiments done in the Barcelona CIEM flume. This experiment was part of the TA within Hydralab III. The aim of the experiments was to obtain new data of flow velocity in a large scale wave flume where the bottom boundary layer is in the turbulent regime. The measurements provide instantaneous velocity values along the vertical, offshore of the breaker line, in presence of an erodible bed and, in turn, in presence of small scale bedforms. The data is elaborated in order to obtain statistical quantities such as ensemble-averaged velocity profiles, steady velocity components, Reynolds stresses and eddy viscosity.</p> <p>Due to its size, the data set can not be placed on this repository and will be provided on demand. Please contact with the authors or with the data manager of the CIEM installation.</p> <p>More information can be found on the published papers:</p> <p>Scandura, P and Foti, E., 2011. Measurements of wave-induced steady currents outside the surf zone. Journal of Hydraulic Research, Vol. 49, 64-71</p>
A ferrofluid-based sensor to measure bottom shear stresses under currents and waves. Data set: VelocityProfilies_2018_Musumarra
<p>The experimental campaign was devoted to study the velocity profile inside the small scale flume for several bottom configurations. In particular, the following configurations were considered: thin sand (D<sub>50</sub>=0.25 mm); coarse sand (D<sub>50</sub>=0.56 mm); mixed sand: 10% coarse sand and 90% thin sand; mixed sand: 20% coarse sand and 80% thin sand; mixed sand: 30% coarse sand and 70% thin sand; mixed sand: 40% coarse sand and 60% thin sand; small gravel (diameter between 3 and 5 mm); gravel (diameter between 9 and 14 mm); small gravel and thin sand; gravel and thin sand.</p>
Data set from long-term wave, wind and response monitoring of the Bergsøysund Bridge
<p>Wind, wave, displacement and acceleration data have been collected in a measurement campaign on the Bergsøysund Bridge between the years 2014 and 2018. The data set is now available in this open-access research entry, for free access and download. The data is collected in two h5-files (hierachical data format), with sampling rates 2 Hz and 10 Hz, downsampled from the raw sampling rate of 200 Hz. Note that the data has undergone some minimal signal processing and adjustment, in line with that applied to the Hardanger Bridge data described in Fenerci et al. (2021). Tools and examples for import, data visualization and initial analysis are given in the opyndata Python package available on GitHub (Kvåle, 2022). Furthermore, a document briefly describing the hierarchy and structure of the data, is given. For more details on the measurement system and the bridge, it is referred to Kvåle and Øiseth (2017).</p> <p>The updated, copyrighted version of the appended preprint is published by ASCE with the following DOI: <a href="https://doi.org/10.1061/JSENDH.STENG-12095">10.1061/JSENDH.STENG-12095</a></p>
COBALTO data set at large at CIEM large scale wave flume
<p>The experiments carried out are framed within the COBLTO project (CTM2017-88036-R) and<br> the doctoral thesis of Carlos Astudillo. A surrogate Posidonia meadow has been used to study<br> the wave attenuation, velocity affections and changes in sediment transport due to the<br> comparison of experiments with the meadow and the benchmark cases where the meadow<br> was absent on the flume experiments. Two different wave conditions, high energy waves and<br> low energy waves, have been considered. The case with higher energy was also repeated with<br> a third configuration in which a meadow length of 5 m was also studied.</p>
Atmospheric visibility inferred from continuous-wave Doppler wind lidar, data set
<p>Visibility data from Pershore, UK, between 2018 and 2020</p>
Data set for "Chiral Magnonic Crystals: Unconventional Spin-Wave Phenomena Induced by a Periodic Dzyaloshinskii-Moriya Interaction"
<p>Scripts for the micromagnetic simulations of the publication "Chiral Magnonic Crystals: Unconventional Spin-Wave Phenomena Induced by a Periodic Dzyaloshinskii-Moriya Interaction", using the OOMMF software. These codes reproduce the result of magnonic waveguides with periodic Dzyaloshinskii-Moriya interactions. A Dockerfile and a Makefile are included for the reproducibility of the results.</p> <p>The repository containing these results, together with a explanatory README document can be found in:</p> <p>https://github.com/davidcortesortuno/paper-2018-chiral_magnonic_crystals</p> <p> </p> <p>The files included in this Zenodo release refer to the v1.0 version of the data set. For an updated version of the scripts refer to the Github repository.</p>
Bubble and ppt data set at CIEM large scale wave flume
<p>The present work was developed in work of an internal UPC project. The experiments were carried out in the large scale wave flume CIEM at Universitat Politècnica de Catalunya (UPC), Barcelona.</p> <p>The data set aims to evaluate the false reading of Optical Backscatter Sensors produced by air bubbles at breaking conditions. In order to do that a set of different wave conditions (wave height ranging from 0.2 up to 0.85 and period from 2 to 7 s) have been tested at two different Still water conditions (2.5 and 2.65) with a barred profile in the wave flume.</p> <p>Due to its size, the data set can not be placed on this repository and will be provided on demand. Please contact with the authors or with the data manager of the CIEM installation.</p>
Internal Wave Bolus Data Set
<p>Image files for experiments of internal wave boluses. Stratification data for the experiments is also included.</p>
ScienceDex guides
Understand access before you commit
These curated guides explain access requirements, typical timelines, costs, and reuse considerations for widely used research datasets.
Allen Brain Atlas
Allen Brain Atlas is an Allen Institute collection of brain map atlases, datasets, APIs, and analysis tools covering mouse, human, and non-human primate brain resources.
Annotated Behaviour and Observability Dataset (ABODe)
ABODe is a University of Edinburgh DataShare dataset for behavior classification in group-housed mice using home-cage video, identities, bounding boxes, ground-plate positions, and annotator labels.
DANDI Archive for NWB datasets
DANDI is a BRAIN Initiative archive for publishing and sharing neurophysiology data, including electrophysiology, optophysiology, and behavioral data packaged as NWB and related standards.
International Brain Laboratory public data
The International Brain Laboratory public data releases expose standardized mouse decision-making experiments, including Neuropixels recordings, widefield calcium imaging, behavior, and session metadata accessed through the ONE API.
OpenNeuro
OpenNeuro is a free, open platform for sharing neuroimaging datasets, with public search, dataset pages, and download paths for web, S3, DataLad, and the OpenNeuro CLI.